All products

Stationery

Model B779B is a unicorn-print fabric pencil pouch supplied in a hanging blister pack, packed 36 pieces to an inner pack. The quilted body is printed with unicorns, hearts and stars, with a zipper closure along the top and a loop strap at one end for carrying. It comes in 5 colours, including green, pink, purple and navy, and the blister packaging with hang tabs suits peg display as well as everyday storage of pens and pencils.

Classic Bicycles for Men

The Classic 22" is a men's roadster bicycle on larger 28" x 1.5" wheels, with a traditional diamond frame for everyday riding and commuting. It is offered in dark green and in black. The frame has a straight top bar and a curved front fork. Full mudguards cover both wheels, with a white reflector at the back of the rear mudguard. A partial chain guard runs over the chain and chainwheel. A black saddle and a chrome upright handlebar with brake levers complete the classic layout, and the spoked wheels run on chrome rims.

Brass Terminals

13mm brass battery terminal with a 2-bolt design for reliable electrical connections on automotive batteries. Its CuZn-63/37 brass construction offers high conductivity. A battery terminal clamps onto the battery post and holds the cable end. Two triangle-marked hex bolts on top clamp the cable in a round side entry, and a cross bolt with a hex nut tightens the split collar onto the post. The body has a pale brass finish with yellow-gold bolts. Standard packing is a 12 Pcs. Packet. Catalogue code: SBT011410

Single Row Deep Groove Ball Bearings

KAZI 6410 deep groove ball bearing: 50 mm bore (ID), 130 mm outer diameter (OD), 31 mm width.

Electrical Components

High-power relay for headlight circuits. Improves light output and protects switch. 6 Pin with wire.

Matt Series

Design 51037 is a Matt Series 450 x 300 mm wall tile with a white speckled stone look, sold as 100% water proof. The base tile is white with grey speckles and a single fine line near one edge. One decorative tile divides the same speckled surface into a grid of rectangles with dark grey joint lines; another runs it in horizontal strips between charcoal bands. The design is offered as 51037-L, 51037-HL-1 and 51037-HL-2 for wall use, with a matching floor tile available in 300 x 300 mm. Catalogue code: 51037, 51037-L, 51037-HL-1, 51037-HL-2

Single Row Deep Groove Ball Bearings

KAZI 6203 deep groove ball bearing: 17 mm bore (ID), 40 mm outer diameter (OD), 12 mm width.

Glossy Series

Wood-look wall tile 11220 from the Glossy Series, 450 x 300 mm, with a bevelled block layout of four wood-grain panels, in three designs: 11220-L, 11220-HL and 11220-D. 11220-L shows the blocks in a pale, whitewashed wood grain, and 11220-D in a mid-brown wood grain with visible knots. 11220-HL keeps two pale blocks and replaces the other two with floral geometric patterns in teal, orange, pink and brown, each framed in darker wood. The tiles are listed as 100% water proof and are made for walls, with a matching floor tile available in 300 x 300 mm. Catalogue code: 11220, 11220-L, 11220-HL, 11220-D

Glazed Porcelain Tiles

Carlo Snow is a matt, stone-look glazed porcelain tile in 60x120 CM from the Carlo collection. The face is a soft warm off-white with a fine, even speckle and faint cloudy shading, giving a calm, uniform stone surface. For choosing, the key specs are slip resistance (COF) > 0.40 dry, > 0.40 wet (ISO-10545-17), surface abrasion resistance Class PEI 4 (2100 revolutions) (EN 154), water absorption < 0.05% (ISO-10545-3), breaking strength > 1800 N (ISO-10545-4) and reaction to fire Class A1 - A1 fl. Beyond 60x120 CM, the Carlo collection comes in 100x100, 120x180, 60x60, 30x60, 80x80, 80x160 and 120x120 CM, in the Soft, Smoke and Silver colours as well.

Glazed Porcelain Tiles

Aleut Bianco is a matt glazed porcelain tile with a concrete look in 80x80 cm from the Aleut collection, with 60x60 cm and 60x120 cm sizes also listed. The off-white face shows light grey clouding and fine streaks, giving a soft, bright concrete effect. Water absorption is < 0.05% (ISO-10545-3) and breaking strength > 1800 N (ISO-10545-4). Surface abrasion resistance is Class PEI 4 (2100 revolutions), stain resistance Class 5 (ISO-10545-14), and slip resistance > 0.40 dry, > 0.40 wet (ISO-10545-17). Frost resistance and thermal shock resistance are rated Pass, and reaction to fire is Class A1 - A1 fl. The Aleut collection also comes in Pearl, Beige, Grafito, Grey and Nero.

Double Row Spherical Roller Bearings

KAZI 23220 spherical roller bearing: 100 mm bore (ID), 180 mm outer diameter (OD), 60.3 mm width.

Wooden Tiles

African Wood Brown wooden tile from the African Wood collection, a 20x120 cm wood-look plank in a matt with structure finish. The face has a warm honey-brown, weathered timber look with darker grain swirls, knots and fine crack lines, and the planks lay in a staggered pattern. Key specs: water absorption < 0.05% (ISO-10545-3), breaking strength > 1800 N and modulus of rupture > 40 N/mm2 (ISO-10545-4), surface abrasion Class PEI 4 (2100 revolutions, EN 154), Mohs scratch hardness 5 (EN 101), slip resistance > 0.40 dry and <0.40 wet (ISO-10545-17), stain resistance Class 5, frost and thermal shock resistance Pass, and reaction to fire Class A1 - A1 fl.

Single Row Cylindrical Roller Bearings

KAZI NU2205 single row cylindrical roller bearing (NU type): 25 mm bore (ID), 52 mm outer diameter (OD), 18 mm width.

Infinite Series

Infinite Series 9005 is a 600 x 600 mm matt-finish porcelain tile for floors and walls in residential and commercial spaces. Its soft white surface carries cloudy, onyx-like translucent patches and fine amber-brown veins. The four faces differ in their veining, so a laid floor shows a varied stone look, with each tile's pattern changing across the grid. Each tile is approximately 9 mm thick. One box holds 4 tiles and covers 1.44 sq. mtr. Catalogue code: 9005

Brass Hooks

Kodia 904 Mayur brass hook, a single wall or door hook for hanging clothes, towels and bags. It is offered in SS, Ant. and Gold finishes. The back plate is shaped like a leaf, with deep ridged veins running out from the centre and two countersunk screw holes for fixing. A smooth round arm curves down and up from the plate and ends in a ball tip that holds items in place. The finish shown is a satin silver tone. Part numbers: 904 (MAYUR)

Marmi Onyx Aqua is a 30x120 CM onyx-look tile in a satin finish, with a flat face in soft aqua-green. Sweeping grey-green bands and fine beige and white veins cross the stone pattern, with crystalline cloudy patches near one end. The satin finish gives the pattern a gentle, even sheen. Other colours in the Marmi Onyx collection are Aqua Corte, Sky, Sky Corte, Beige and Beige Corte.

Ceramic Wall Tiles

4586 D is a plain mid-grey 60x30 CM matt ceramic wall tile with soft, cloudy concrete-like shading, part of the 4586 collection in a Texture & Decor look. The even grey face carries only gentle mottling, and the collection pairs it with 4586 H2, 4586 L and 4586 H1. The tile is listed with water absorption > 12-18% (ISO-10545-3), breaking strength > 800 N and modulus of rupture > 18 N/mm2 (ISO-10545-4), stain resistance Class 5 (ISO-10545-14), and a pass for thermal shock resistance (ISO-10545-9).

Door Hardware

Bronze-finish Victorian screen door latch set: a rim latch with lever handles for screen doors, forged from heavy-duty metal with a warm, antique bronze finish that suits traditional and modern farmhouse decor. It is built to withstand the elements while keeping its structural integrity over long use. The set comprises a latch case with lever, a second lever on a rectangular backplate and a keeper, all with raised Victorian scroll, star and leaf ornament; the case carries a small square catch button on its face. It includes the components needed for installation and operates smoothly, giving durability, security and vintage appeal to historical restorations and new builds alike. Catalogue code: GMC-SEL400108B-K

Designer Collection - Table Top

The "Shallow - 013" is an oval, boat-shaped designer table top basin with upswept ends, finished outside in a speckled silver-grey texture splashed with bold black drip-and-splatter strokes. A thin black band edges the rim, and the bowl inside is plain white, giving a sharp contrast with the dark, abstract outer decoration. It belongs to the "Designer Table Top" range of the Designer Collection.

Dies & Moulds

Plastic dies and moulds for plastic parts used in textiles, electrical & electronics and mechanical engineering.

Pull Handles

BPH-204 is a bar pull handle with a fully knurled round grip in a satin nickel-tone finish. The diamond-knurled bar ends in smooth flat caps edged with a bright polished ring, and it stands on two plain round posts with flanged feet that sit against the mounting surface. The fine knurling gives a textured hold, and the brushed silver tone suits cabinets, drawers and doors. Catalogue code: BPH-204

60x120cm PGVT

Sparten Onyx White is a 600 x 1200 mm PGVT (Polished Glazed Vitrified Tile) in a glossy finish, styled as white onyx. Soft cloudy swirls of white and pale grey run through the face, edged with thin beige and gold veins. The design comes in 5 faces, meaning 5 different print variations, so the onyx pattern shifts from tile to tile. Each box holds 2 pieces covering 1.44 sqm and weighs approx. 32 Kgs. Tile thickness is given as approx. 9.

Glossy Series

Glossy Series 11248 is a 450 x 300 mm wall tile design in pale grey and sage green, with a peacock-feather pattern tile to go with it. The L tile is a pale grey-white with fine white veining, and the D tile is sage green with the same light veining. The HL tile shows green peacock feathers with orange and blue eyes scattered across a pale ground. These are 100% water proof tiles, and a matching floor tile is available in 300 x 300 mm. Catalogue code: 11248-L, 11248-HL, 11248-D

Double Row Angular Contact Ball Bearings

KAZI 3221 double row angular contact ball bearing: 105 mm bore (ID), 190 mm outer diameter (OD), 65.1 mm width.

Bathroom Latches 100MM

Kodia 01 bathroom latch handle, 100MM, a lever handle on a backplate for bathroom and toilet doors. The 01 design pairs a slim, tapered lever with a rounded rectangular backplate with a stepped edge, all in a brushed silver finish. The plate fixes with three screw holes, one above the lever and two below. It belongs to Kodia's SS 304/zinc mortice handle line, in its bathroom latches group. Mounted on the door face, the lever turns the bathroom latch to open and close the door.