Machine Tools suppliers in India

Drilling Machine

CAPACITY 63 - 1500 Drilling [C.I.] 70 Drilling [M.S.] 60 Boring [M.S.] 80 Tapping [C.I.] M - 30 Tapping [M.S.] M - 25 Drilling Head Spindle Nose M.T.-5 Spindle Nose Outside Diameter 75 Ram Diameter 100 Travel of Spindle 300 Number of Spindle 10 Speed Min./Mix. 30 - 1500 Number of Power Feeds 2 Range of Power Feeds 0.10 + 0.20 Power Drilling Head 5 HP Two Speed Motor 1440 + 2800 Lighting of Arm 2 HP 1440 Working Range Column Diameter 345 Dist. From Spindle to base min./mix. 400 x 1400 Dist. From Column to centre min./mix. 385 x 1450 Drilling Head Travers 1050 Drilling Radius 1600 Traverse of Arm 840 Base Plate Height of Base Plate 200 Working Surface 930 x 1400 Number/Centre Dis of T Sloth Length 3 x 300 Width of Cast Side 22 mm Oerall Dimensions [ L x W x H ] 2500 x 1200 x 2500 Weight Approximate 4000

Grinding Machine

Flap Bruch Grinders (Without Wheel) MODEL NO. H.P. K.W. PHASE R.P.M. Volts APPROX WT. KG. RFBG-1 1 0.75 3 2800 440 35 RFBG-2 2 1.50 3 2800 440 55 RFBG-3 1 0.75 1 2800 230 35 RFBG-4 2 1.50 1 2800 230 55

Grinding Machine

Heavy duty bench grinder in thirteen models, RG-01 to RG-12 and RG-17: a horizontal, double-ended electric grinder for sharpening, shaping and smoothing metals and tools, running at 2800 RPM. The 3 phase models run on 440 Volts and the 1 phase models on 230 Volts. It is made for steady daily work in factories and workshops handling steel, iron and other industrial components, with tool sharpening, surface smoothing and material preparation as typical jobs. The horizontal build gives stability and keeps vibration low, and the electric drive reduces manual effort while adding to workplace safety. It is built from quality-tested materials meant to withstand intense daily grinding, and serves metalworking and repair professionals and the distributor, exporter, supplier, trader and wholesaler markets in India. Sizes run from the 0.12 H.P. RG-07 with a 100x13x19.05 mm wheel up to the 2.0 H.P. RG-06 and RG-17 with a 300x40x50.80 mm wheel. The green body sits on a pedestal base with a round front switch, and both wheels carry guards and tool rests. The grinder should be connected to the supply by a qualified professional, fixed on a stable surface and run with protective gear, keeping hands clear of rotating parts. Routine care means clearing dust and debris, checking wheels for wear or damage, inspecting wiring and connections, and lubricating moving parts as the user manual sets out. Sold from 1 piece with delivery in 1 week; samples are available, payment is by cash in advance or cheque, and it is exported to Africa, the Middle East and Asia. Part numbers: RG-01, RG-02, RG-03, RG-04, RG-05, RG-06, RG-07, RG-08, RG-09, RG-10, RG-11, RG-12, RG-17 RG-01: 0.25 H.P. / 0.18 kW, 2800 RPM, 3 phase, wheel size 100x20x19.05 mm, shaft diameter 12.70 mm, approx. 14 kg RG-02: 0.5 H.P. / 0.37 kW, 2800 RPM, 3 phase, wheel size 150x20x31.75 mm, shaft diameter 15.80 mm, approx. 22 kg RG-03: 0.5 H.P. / 0.37 kW, 2800 RPM, 3 phase, wheel size 200x20x31.75 mm, shaft diameter 15.80 mm, approx. 26 kg RG-04: 0.75 H.P. / 0.55 kW, 2800 RPM, 3 phase, wheel size 200x25x31.75 mm, shaft diameter 19.00 mm, approx. 35 kg RG-05: 1.0 H.P. / 0.75 kW, 2800 RPM, 3 phase, wheel size 250x25x31.75 mm, shaft diameter 19.00 mm, approx. 46 kg RG-06: 2.0 H.P. / 1.50 kW, 2800 RPM, 3 phase, wheel size 300x40x50.80 mm, shaft diameter 25.40 mm, approx. 69 kg RG-07: 0.12 H.P. / 0.09 kW, 2800 RPM, 1 phase, wheel size 100x13x19.05 mm, shaft diameter 12.70 mm, approx. 09 kg RG-08: 0.25 H.P. / 0.18 kW, 2800 RPM, 1 phase, wheel size 100x20x19.05 mm, shaft diameter 12.70 mm, approx. 14 kg RG-09: 0.5 H.P. / 0.37 kW, 2800 RPM, 1 phase, wheel size 150x20x31.75 mm, shaft diameter 15.80 mm, approx. 22 kg RG-10: 0.5 H.P. / 0.37 kW, 2800 RPM, 1 phase, wheel size 200x20x31.75 mm, shaft diameter 15.80 mm, approx. 26 kg RG-11: 0.75 H.P. / 0.55 kW, 2800 RPM, 1 phase, wheel size 200x25x31.75 mm, shaft diameter 19.00 mm, approx. 35 kg RG-12: 1.0 H.P. / 0.75 kW, 2800 RPM, 1 phase, wheel size 250x25x31.75 mm, shaft diameter 19.00 mm, approx. 46 kg RG-17: 2.0 H.P. / 1.50 kW, 2800 RPM, 1 phase, wheel size 300x40x50.80 mm, shaft diameter 31.80 mm, approx. 100 kg

Wood Working Machinery

Having rich industrial experience and knowledge, we have been instrumental in exporting and supplying fine grade Blade grinder. This grinder is widely used for wood cutting and finishing purpose in wood working. The offered grinder is manufactured by using quality assured components by ingenious professionals at highly advanced production unit. Keeping in mind the clients' requirements, We manufacture this grinder in different specifications. Our clients can avail this Blade grinder at the pocket friendly price from us. Features: Highly efficient Longer service life Easy to Operate

Drilling Machine

Drilling Cum Milling machine, an electric milling machine that combines drilling and milling on a single round column. The drill head carries a spoked feed lever and a handwheel, and the compound cross table has long T-slots and is moved by handwheels at both ends and at the front, so a workpiece can be positioned for milling cuts as well as drilled. The column stands on a rectangular base with T-slots, and the whole machine has a painted green finish.

Sheet Metal Machines

Roll bending machine for rolling metal sheet and plate into curved and cylindrical shapes. The electric, automatic machine has a painted finish in blue and light grey, with a long horizontal top roll between two blue end housings, a control panel on the left housing and bolted cover panels along the base. Minimum order is 1 unit with delivery in 1 week, and free samples are available within a certain price range. Payment is by cash in advance or cheque; main export markets are the Middle East, Asia and Africa.

Sheet Metal Machines

Bhaiya Cutter, a hand lever shear for cutting sheet metal. A long tubular hand lever swings a red-brown upper blade arm on a pivot against a lower blade bar bolted along the front of the frame. The plate body is painted green, a light blue-green shade, and stands on two flat feet with bolt holes for mounting. Its power source is listed as hydraulic, with manual operation. Minimum order is 1 Unit and delivery takes 1 Week. Free samples are available within a certain price range, payment is by cash in advance or cheque, and main export markets are the Middle East, Asia and Africa.

Sheet Metal Machines

Over crank shearing machine for cutting sheet metal, built in a mechanical clutch version and a pneumatic clutch version, each covering 1270 x 4mm to 4000 x 16mm. The electric, semi-automatic machine has a painted blue frame with a white front panel, a large spur gear and a V-belt pulley on one side, and horizontal rollers across the lower front. Minimum order is 1 unit with delivery in 1 week, and free samples are available within a certain price range. Payment is by cash in advance or cheque; main export markets are the Middle East, Africa and Asia.

Drilling Machine

The ALL GEAR RADIAL DRILL MACHINE is an all-gear-drive radial drill with an MT 4 spindle taper, built for drilling, tapping, boring and reaming in heavy fabrication workshops, steel plants and engineering industries. It takes a maximum drilling diameter of 40 mm to 60 mm depending on model, with variable working speeds across 8 to 12 spindle speeds. A heavy-duty cast iron frame and hardened gears give smooth, low-noise operation with high precision and consistent, repeatable accuracy, suited to continuous, heavy-duty production on large workpieces. A built-in coolant pump and centralized lubrication reduce thermal and frictional wear for longer-lasting operation in continuous use. The machine is electric and semi-automatic with manual/electrical control, rated 2-3 HP (2.2 kW approx.) on 220V/380V/415V, 50Hz, for an ambient industrial temperature range. It is painted/coated in blue and white, with a box-type work table on a T-slotted base plate, a push-button control panel, a handwheel and feed handles on the drilling head. The model is supplied as per requirement. Each machine is packed for safe transit, with FOB ports available for international shipments. Minimum order is 1 Piece. Specifications: Column Diameter 200 - 300 mm · Spindle Travel 200 - 300 mm · Arm Length 1000 - 1600 mm · Table Size 600 x 450 mm (approx.) · Base Plate Size 1200 x 800 mm (approx.) · Dimension (L*W*H) Approx. 2000x1000x2200 mm · Weight Approx. 2000 kg

Lathe Machine

Light duty lathe machine, model "Standard Light Duty", for small workshops, tool rooms, maintenance shops, startups and educational institutions, with 165 mm centre height, 315 mm swing over bed and 725 mm admitted between centres on a 1370 mm bed. It handles turning, facing, threading, drilling and knurling for one-off jobs and small to medium batches, with a machining accuracy of 0.05 mm. The compact, free-standing machine needs about 1.8 x 0.75 m of floor space; overall size is 1520 x 700 x 1200 mm (approx.) and weight about 350 kg. Conventional, hand-operated manual controls give direct tactile feedback, suit operators of varying experience and training work, and keep initial cost lower than CNC. The four-way tool post speeds tool changes. Safety comes from an emergency stop, guards on moving parts, and overload relays and fuses. It swings 190 mm over the slide and 500 mm in the gap, on a bed 235 mm wide; bed width is also listed as 165 mm, swing over bed as 250 mm to 300 mm and distance between centers as 500 mm to 750 mm. The headstock has a 40 mm hole through the spindle and an M.T.-5 taper bore, also listed as a 30 mm spindle bore with MT3 taper. Spindle nose and size read 6, T.P.I. range 62 mm x 8, with a threaded/standard spindle nose and 8 to 12 spindle speeds. A 1 H.P., 1440 rpm motor drives it by V-belt with a B-52 headstock belt; power is also given as 1 HP to 2 HP, on 220V/440V, 50 Hz. The tailstock sleeve is 38 mm in diameter with an M.T.-3 taper and 125 mm travel, also listed as MT2 taper and 100 mm quill travel. The compound slide swivels 45-0-45 degrees; the cross slide is 175 mm X 400 mm, the carriage 375 mm X 400 mm, and top slide travel 125 mm. It has a 20 mm lead screw, a 150 mm threaded/nut-mounted chuck, 0.05 - 0.2 mm/rev traverse, a 75 dB noise level and a 5C to 45C operating range. The rigid cast iron bed and body are paint coated and listed in Blue & White; the machine has a white and light grey body over a dark grey tray, with red trim on the leg panels. Lubrication and cooling are manual, with an optional coolant pump, and daily lubrication plus weekly checks of belts, spindle and guards keep it in order. Each machine comes with 3-jaw and 4-jaw chucks, centers, a tool post spanner and a gear set. Minimum order is 1 unit, delivery takes 1 week, and the main export markets are Asia, the Middle East and Africa.

Sheet Metal Machines

Mechanical press brake for bending sheet metal, offered in capacities from 20 TON to 200 TON and supplied to suit each buyer's requirement. Clients value it for longer service life, efficient operation and less maintenance, and its listed features are dimensional accuracy, high productivity, accuracy and precise design. The electric, semi-automatic machine is green with a galvanized surface treatment. It has a large housing across the top, a yellow band along the beam and a hanging control pendant on a side arm. Minimum order is 1 unit with delivery in 1 week, and free samples are available within a certain price range. Payment is by cash in advance or cheque; main export markets are the Middle East, Asia and Africa.

Grinding Machine

Extra Heavy Duty grinder in three three-phase models for grinding metal on 12" x 1.5" wheels: RHG-1 with 2 H.P. (1.5 kW), RHG-2 with 3 H.P. (2.2 kW) and RHG-3 with 5 H.P. (3.7 kW). Each runs at 1440 / 2800 RPM with a shaft diameter of 31.80, and approximate weights are 110 kg, 125 kg and 130 kg respectively. The machine is a green, double-ended grinder with a long motor housing on a footed base and a guarded wheel with tool rest at each end. It is sold from 1 Unit with delivery in 1 Week, and is exported to the Middle East, Africa and Asia. Samples are available, free within a certain price range; payment is by cash in advance or cheque. Part numbers: RHG-1, RHG-2, RHG-3

Lathe Machine

Extra H.duty Lathe 12 ft. Unit: 1 Capacity Height of center 600 mm Swing over cross slide 850 mm Swing over bed 1200 mm Swing in gap 1500 mm Admit between Center 2100 mm Length of bed 3600 mm Width of bed 650 mm Head Stock Hole through the spindle 100 mm Range of spindle speeds 15 to 300 R.P.M. Lead Screw Diameter /Threads (TPI) 50/2 Tail Stock Tail stock Sleeve travel 250 mm Top slide travel 175 mm Tail Stock RAM dia. 76.2 Tapper in Tailstock RAM MT-6 Cross Slide travel 600 mm Drive And Electrical Main Motor H.P./ R.P.M. 10 H.P./960 RPM Standard Accessories Chuck Plate Motor Pulley Tool Post Key Dead Centers -2 Nos. Center Adopter Change Gear - B.S.W-13 Change Gear - M.M.-3

Grinding Machine

Pedestal Grinders (With Starter) MODEL NO. H.P. K.W. PHASE R.P.M. WHEEL CENTER DIST. CENTER HEIGHT WHEEL SIZE APPROX WT. KG. RPG-12 2 1.5 3 2800 790 mm 945 mm 12" x 1.5" 200 RPG-14 3 2.2 3 2800 790 mm 945 mm 12" x 1.5" 215 RPG-16 5 3.7 3 2800 790 mm 945 mm 12" x 1.5" 220 Also available in 1440 RPM option.

Wood Working Machinery

Vertical band saw for woodworking: an electric machine for cutting wood into various shapes, running at 1440 RPM on a 220-380 Volt (v) supply and weighing 250 Kilograms (kg). The red machine has a tall C-shaped upper frame, a yellow-topped work table with a fence, a blade guide post with an adjusting knob, and a box base with grey vented side panels on four foot mounts. It offers corrosion resistance, user-friendly operation, less maintenance and power-efficient running, and comes in several specifications for export and supply. Warranty is 6 MONTH. Minimum order is 1 Unit, delivery takes 1 Week, and free samples are available within a certain price range. Payment terms: Cash in Advance (CID), Cheque, Cash Advance (CA).

Grinding Machine

Extra heavy polisher in two models, RHP-01 and RHP-02: a double-ended polishing machine for workshop buffing and finishing, driven by a 3 phase motor running at 2800 RPM. RHP-01 is rated 7.5 H.P. and RHP-02 is rated 10 H.P. The pale green, foot-mounted motor body has a long tapered spindle at each end for mounting polishing mops. It is sold from 1 unit with delivery in 1 week. Samples are available, and payment is by cash in advance or cheque. Part numbers: RHP-01, RHP-02 RHP-01: 7.5 H.P., 2800 RPM, 3 phase RHP-02: 10 H.P., 2800 RPM, 3 phase

Milling Machine

Vertical milling machine in blue and white for the automobile, forging, plastic and sheet metal industries. Made from optimum quality raw material, it is known for high performance, dimensional accuracy, sturdy surface construction, low energy consumption and an excellent, longer service life, and it is appreciated in international and national markets. It runs on electricity, is listed as automatic in operation and has a painted finish. A blue milling head sits on a white column above a work table with handwheel feeds, with blue panels on the base. It is offered in various shapes and capacities. Minimum order is 1 unit, delivery takes about 1 week and samples are available. Payment is by cash in advance or cheque, and the main export markets are the Middle East, Asia and Africa.

Grinding Machine

Hydraulic surface grinder in the IMT series, made in different shapes and sizes to each customer's requirements and built for a fine finish. The base gives high accuracy, the grinding wheel spindle trouble free service, the wheel head assembly dust free operation and the carriage surface finish and accuracy. Table sizes are 175 x 350 mm, 225 x 450 mm, 250 x 600 mm and 300 x 750 mm, with maximum height from table to grinding wheel of 200 mm, 275 mm, 300 mm and 300 mm. The recommended motor is 0.75 kw-1HP, or 1.5 kw-2HP for the largest table. It comes with magnetic chuck, grinding wheel and guard, electric motor, electric coolant pump, diamond tool and holder, wheel balancing stand, work light and wheel-change spanner. The green machine stands beside a separate hydraulic unit and an electrical control cabinet. Sold from 1 unit, with delivery in 1 week and samples available, for the Middle East, Africa and Asia. Part numbers: IMT-05, IMTH-06, IMT-06, IMT-08, IMT-07, IMT-09, IMT-300

Drilling Machine

CAPACITY 40 MM 38 MM 32 MM 25 MM HD 25 MM MD 25 MM LD 20 MM Drilling [C.I.] 45 38 32 25 25 25 20 Drilling [M.S.] 40 35 32 25 25 25 20 Tapping Cap. 25 20 15 20 15 15 10 Drill Head Taper Spindle M.T.-4 M.T.-4 M.T.-4 M.T.-3 M.T.-3 M.T.-3 M.T.-2 Quil Movement 240 240 250 240 175 155 120 Speed No. Range of Spindle 8 8 8 8 8 8 8 Speed min./max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 150 to 2651 80 to 3500 Feeds No. Range of Feed Manual Manual Manual Manual Manual Manual Manual Working Range Distance from Spindle Center to Cloumn Face 355 300 280 250 250 230 200 Max. Distance from Spindle to base Plate 1030 1000 1000 1000 970 1050 900 Max. Distance from Spindle to work tabel 550 530 530 530 530 680 650 Work Table Table Diameter 485 x 485 422 x 422 422 x 422 370 round 325 x 325 310 x 310 250 x 250 Base Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800 x 525 720 x 470 660 x 410 660 x 410 580 x 365 370 x 550 480 x 310 No. of 'T' Slots 2 2 2 2 2 2 2 Power Drilling Motor 2 HP 1.5 HP 1 HP 1 HP 1 HP 1 HP 0.5 HP 960 RPM 1400 RPM 1400 RPM 1400 RPM 1400 RPM 1440 RPM 1400 RPM Weight [Kgs.] Weight in K.G. 550 375 300 275 225 185 110 V-BELT B-71 B-57 B-56 B-52 B-52 B-49 A-44

Lathe Machine

Heavy duty lathe machine for workshop turning and thread cutting, with 254 mm centre height, 450 mm swing over bed and 1000 mm admitted between centres on a 2130 mm bed. It is offered in between-centre lengths of 5'-6" (500 mm), 7' (1000 mm), 9' (1600 mm), 10' (1900 mm) and 12' (2500 mm). It swings 280 mm over the slide and 760 mm in the gap, on a bed 325 mm wide. The headstock has a 54 mm hole through the spindle, an M.T.-6 taper bore, a 6 T.P.I. spindle nose and 8 spindle speeds from 30 to 500 R.P.M., driven by a 2 H.P. motor and a buss type headstock belt. It cuts metric threads of 1 to 7 mm and inch threads of 4 to 28 T.P.I. through a 38 mm lead screw with 4 T.P.I. The tailstock has a 60 mm spindle die, an M.T.-4 taper bore and 200 mm spindle travel. The compound slide swivels 45-0-45 degrees, the cross slide measures 200 mm x 500 mm with 280 mm travel, the carriage measures 450 mm x 500 mm, and the top slide travels 150 mm. Net weight is 1300 kg, total height 1300 mm and floor space 1250 x 2500. The machine is finished in light blue, with a red pulley guard and handwheel, and stands on two box-type legs. Standard accessories are a face plate, chuck plate, steady rest, follow rest, motor pulley, change gears (S. W-13 and M. M.-3), two dead centres, a centre adopter and a tool post key. Minimum order is 1 piece, delivery takes 1 week, samples are available, and the main export markets are Africa, the Middle East and Asia.

Sheet Metal Machines

Hand Folder Press for folding and bending sheet metal edges, built on a light green A-frame stand. A tan upper clamping beam with a notched top edge sits over a dark folding beam, with a short handle at the right end and a black lever frame running diagonally between the legs below. The body is painted green, with the power source listed as electricity and semi automatic operation. Minimum order is 1 Unit and delivery takes 1 Week. Free samples are available within a certain price range, payment is by cash in advance or cheque, and main export markets are the Middle East, Asia and Africa.

Drilling Machine

20MM Bench Drill Machine with a heavy duty cast iron base and pillar, made for drilling holes up to 20 mm in steel and also in aluminium, brass, plastic, wood and other engineering materials. It serves engineering workshops, machine shops, automotive workshops, tool rooms, fabrication units, maintenance units, educational institutes and small-scale industries, for production as well as repair work. The belt-driven spindle has an MT2 taper and 125 mm travel, giving 5 or more speeds across 450-2500 RPM by pulley setting, with run-out accuracy of 0.02 mm. The chuck takes 1-13 mm or 1-20 mm. The 250 mm x 250 mm table adjusts in height and angle by rack and pinion and sits 750 mm from the floor, with 600 mm maximum from spindle to base, a 63 mm column and a 300 mm x 500 mm base. Feed is by manual lever, lubrication is manual and a coolant system is optional. The cast iron frame keeps vibration low for steady, accurate drilling with low maintenance, and every machine is inspected before dispatch. Power is 0.5 HP - 1 HP (0.37-0.75 kW) on 220-240V (Single Phase), 50-60 Hz, with a noise level of 70 dB and an operating range of 5C to 45C. The paint-coated machine is green and orange, measures approx. 700 x 350 x 1200 mm and weighs 50 - 70 kg (approx.). Production capacity is 30-50 machines per month.

Drilling Machine

Radial Drill Machine in 25 MM and 40MM capacity models: a manual cast iron radial drill for drilling, boring and tapping cast iron (C.I.) and mild steel (M.S.), with drilling up to 40MM and boring up to 50MM on the larger model. The machine is green, supplied new, and manual and non-computerized. A trained technician sets it up and runs drilling, tapping and boring jobs. The radial arm and drilling head reach across large, heavy or intricate components on hard surfaces. That suits industrial workshops, manufacturing units, engineering firms, fabrication shops, tooling sections and heavy construction work. A round column carries the arm, and the drilling head has a handwheel and feed lever. A box table and the base plate both have T-slots. Each unit is packed for safe transit and dispatched across India, with export to the Middle East, Africa and Asia. Orders start at 1 piece, delivery time is 1 week, and both advance purchase and bulk supply are offered. Samples are available for evaluation, free within a certain price range. Advance and bulk orders get priority dispatch. Capacity (25 MM / 40MM): drilling [C.I.] 32 / 40; drilling [M.S.] 25 / 35; boring [M.S.] 40 / 50; tapping [C.I.] 20 / 20; tapping [M.S.] 15 / 18 Drilling head (25 MM / 40MM): spindle nose M.T.-3 / M.T.-4; spindle nose outside diameter 40 / 54; ram diameter 70 / 78; travel of spindle 190 / 220; spindle 8 step pulley / 8 step pulley; speed min./max. 130 to 2600 / 70 to 2000; feeds manual / manual Power (25 MM / 40MM): drilling head 1 HP / 1.5 HP; two speed motor 1440 / 1440; lighting of arm 0.5 HP / 0.5 HP, 1440 / 1440 Working range (25 MM / 40MM): column diameter 130 / 165; distance from spindle to base min./max. 150 x 850 / 300 x 910; distance from column to centre min./max. 380 x 650 / 350 x 900; drilling head traverse 300 / 450; drilling radius 715 / 980; traverse of arm 700 / 720 Base plate (25 MM / 40MM): height 125 / 150; working surface 500 x 710 / 590 x 800; T-slot number/centre distance 3 x 100 / 3 x 150; width of cast side 15 mm / 15 mm Overall dimensions L x W x H (25 MM / 40MM): 1100x800x1600 / 1300x900x1800; approximate weight 500 / 900 V-belt: A - 22, A - 26, B - 38, B - 46 Payment terms: Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID), Cheque

Milling Machine

VM-40 vertical milling machine for metal cutting, drilling and milling in engineering workshops, fabrication units and tool rooms, with a 1270 x 254 mm table. It handles milling, slotting, drilling and surface finishing of steel, aluminium and other metal parts with 0.02 mm accuracy, for both small-batch and large-scale, heavy-duty work. The machine has a cast iron frame and a painted finish, listed in blue; the body shows blue panels over a cream column, with a stepped belt pulley on top of the head. The 3 HP, 1440 RPM spindle motor (power rating 2.2 kW) runs on 415 V, 50 Hz, three phase, through a belt drive with 8 speeds and an ISO 40 spindle taper. Travels are 800 mm longitudinal, 350 mm cross, 400 mm vertical and 120 mm quill, with a maximum table load of 300 kg. An integrated coolant pump and automatic & manual lubrication reduce wear and keep temperature under control for continuous operation. Control is listed as manual, and operating type as automatic. Overall size is 1500 x 1700 x 2100 mm and weight is 1750 kg. It works from 5C to 45C with noise under 80 dB, and production capacity is 500 Units per Month. It comes certified for safety and quality compliance for the Indian domestic market, with main export markets in Africa, the Middle East and Asia. It is packed in a wooden box and backed by after-sales service across India for installation, training and maintenance, plus a standard manufacturer warranty. Minimum order is 1 unit, delivery takes about 1 week and samples are available.