Sunshine Metal Industries
Manufacturer, ExporterAligarh, Uttar Pradesh · since 1998
Business type
Manufacturer, Exporter
Based in
Aligarh Uttar Pradesh
Established
1998
Catalogue
119 products in 10 categories
Shop by category
All products →Their products
119 items across 10 categoriesBrass Hooks11Pull Handles14Iron Hooks13Door Knobs12Cabinet Knobs8Door Knocker11Handrail Brackets5Brass Lever on Rose10Lever Handles17Other Accessories12Other6
Brass Hooks11 products
SBH-01
SBH-01 is a double coat hook in a satin golden brass tone, from the Brass Hooks range, with a long upper arm and a deep lower hook for coats, hats and bags. The upper arm rises in a gentle curve to a round disc tip. The lower hook curls up into a broad, rounded end. An oval backplate with two screw holes fixes it to a wall or door.
Catalogue code: SBH-01
SBH-06
SBH-06 is a brass double coat hook on an oval backplate with a decorative rope-twist border. It holds coats, hats and bags on a wall or door.
A long, slender upper arm curves up to a plain rounded tip, and a short lower hook ends in a rounded knob. The backplate has four screw holes for fixing. The whole piece has a polished golden brass finish.
Catalogue code: SBH-06
SBH-03
SBH-03 is a double coat hook from the Brass Hooks range in a dark black finish, set on a round backplate. It hangs coats, hats and bags.
The upper arm rises in an S-curve to a round ball tip, and the shorter lower hook also ends in a ball. Two slotted screws sit at either side of the round backplate. The smooth, rounded profile has a matt dark tone.
Catalogue code: SBH-03
SBH-02
SBH-02 is a double coat hook from the Brass Hooks range that pairs a matte golden hook with a black mounting block. A long upper arm with a flared, squared-off tip and a deep curved lower hook give two hanging points for coats, hats or bags. The hook passes through the black block, which has chamfered corners and two screw holes for fixing to a wall or door.
Catalogue code: SBH-02
SBH-07
SBH-07 brass double coat hook with a ball-tipped upper arm in a gentle S-curve and a short, rounded lower hook, in a polished gold-tone finish. It mounts on a small scalloped-edge backplate with two screw holes.
The ball tip and the lower hook give two hanging points for coats, hats and bags.
Catalogue code: SBH-07
SBH-04
SBH-04 is a brass double coat hook on a diamond-shaped backplate, pairing a dome-capped upper arm with a broad, flat lower hook. It hangs coats, hats and bags.
The upper arm curves up to a rounded dome cap. The lower arm sweeps forward as a wide, flattened curve with rounded ends. The diamond backplate carries three screw holes for fixing. The finish is polished golden brass.
Catalogue code: SBH-04
SBH-10
Brass coat-and-hat hook SBH-10 with a polished chrome-look finish, for hanging coats, hats and bags. A long, gently curved upper arm ends in a rounded knob, and a short lower hook curls up beneath it from an oval backplate.
The backplate carries four screw holes for fixing to a wall or door. It belongs to the Brass Hooks range.
Catalogue code: SBH-10
Coat & Hat Hook
A coat and hat hook rail with five hooks on one flat wall plate, made for hanging coats and hats. The plate is long and narrow with rounded ends and a screw hole at each end for wall fixing.
Each hook sits on its own oval rose and has a tall upper arm with a lower curl, giving two hanging points per hook. The rail has a bright polished gold-tone finish. Listed under Brass Hooks.
SBH-05
SBH-05 is a brass double coat hook with a mushroom-shaped knob on the upper arm and a ball end on the lower hook, used to hang coats, hats and bags.
The upper arm rises in a gentle curve to a turned collar and a domed mushroom tip. The lower hook curls forward and finishes in a round ball. It mounts on a small shaped plate with two screw holes, one on each side. The finish is polished golden brass.
Catalogue code: SBH-05
SBH-08
SBH-08 brass hat and coat hook with a long, gently curved upper arm and a short rounded lower hook, rising from an oval backplate in a polished gold-tone finish. The backplate has four screw holes for fixing to a wall or door.
The two arms give separate hanging points, the tall arm and the lower hook together holding hats, coats and similar items.
Catalogue code: SBH-08
SBH-09
SBH-09 double coat hook, a polished chrome-look wall hook from the Brass Hooks range. It has two arms on one rectangular back plate: a long upper arm with a rounded tip and a shorter lower hook that curls up into a rounded end, the classic coat-and-hat hook shape. The back plate carries countersunk screw holes for fixing in place. It holds coats, hats and bags.
Catalogue code: SBH-09
Pull Handles14 products
Twisted Door Pull
The Twisted Door Pull is a black pull handle with a rope-twist centre bar. The spiral section runs between two plain round ends, each marked by a pair of fine rings just above a short round standoff that holds the bar out from the door.
SSPH-01
SSPH-01 is a round-bar door pull handle in a brushed satin silver-tone finish. A straight cylindrical bar runs a little past two short round standoffs at each end, and each standoff has a small screw hole at its side for fixing.
As a pull handle, it gives a hand-hold for pulling a door open, with a smooth tubular grip and a plain, modern line.
Catalogue code: SSPH-01
BPH-135
BPH-135 bow pull handle with a gently curved grip and two oval-ended footplates, in a gold-tone finish. The grip tapers toward each end, where it rises from the footplates on short necks.
The slim curved profile suits doors, drawers and cabinet fronts, where a pull handle is used to open and close them.
Catalogue code: BPH-135
BPH-143
BPH-143 ornate pull handle in an antique brass-look finish, with pointed teardrop finials at both ends and round rosettes patterned with a sunburst design. A smooth central grip runs between ringed collars, and crosshatch-textured sections lead out to each finial.
The two rosettes stand off on short posts and hold the handle clear of the mounting face. Pull handles like this are used to open and close doors.
Catalogue code: BPH-143
SSPH-02
SSPH-02 is a flat-bar door pull handle in a brushed satin silver-tone finish. The long, straight bar has a flat rectangular section with squared ends and stands on two round standoffs, each with a small screw hole at its side for fixing.
The flat face gives a clean, linear look on the door, and like any pull handle it offers a hand-hold for pulling the door open.
Catalogue code: SSPH-02
SSPH-02 BLACK
SSPH-02 BLACK is a matte black flat-bar door pull handle. Its long, straight bar has a flat rectangular section with squared ends, carried on two round black standoffs, each with a small screw hole at its side for fixing.
The flat, all-black bar gives a clean, linear look on the door, and like any pull handle it offers a hand-hold for pulling the door open.
Catalogue code: SSPH-02 BLACK
BPH-161
BPH-161 is a decorative door pull handle with a Greek-key pattern running the full length of its flat bar. The repeating key motif is cut into the face, with darker recesses setting off the antique brass-look surface. The bar stands on two round standoffs, one near each end, each with a small screw hole for fixing.
Like any pull handle, it gives a hand-hold for pulling a door open, while the patterned face adds a classic ornamental touch to the door.
Catalogue code: BPH-161
SSPH-01 BLACK
SSPH-01 BLACK is a matte black round-bar door pull handle: a straight cylindrical bar carried on two short round standoffs, one near each end. The black finish covers both the bar and the standoffs, and each standoff has a small screw hole at its side for fixing.
As a pull handle, it gives a simple hand-hold for pulling a door open, with a plain, all-black look.
Catalogue code: SSPH-01 BLACK
BPH-201
BPH-201 pull handle on round roses, with a knurled dark-tone centre grip between smooth antique brass-look end sections. Ringed collars mark each end of the knurled grip, and the bar runs slightly past both roses to stepped end caps.
Each round rose stands off on a short post and has small holes at the side; one rose carries engraved lettering. Pull handles of this kind are used to open and close doors.
Catalogue code: BPH-201
BPH-204
BPH-204 is a bar pull handle with a fully knurled round grip in a satin nickel-tone finish. The diamond-knurled bar ends in smooth flat caps edged with a bright polished ring, and it stands on two plain round posts with flanged feet that sit against the mounting surface. The fine knurling gives a textured hold, and the brushed silver tone suits cabinets, drawers and doors.
Catalogue code: BPH-204
BPH-211
Antique brass-tone pull handle BPH-211, a round bar with ornate ball finials and ringed collars at each end. It serves as a pull handle for opening doors. The straight bar has a brushed finish framed by stepped rings, and it stands off the surface on two round mounting posts with stepped feet.
Catalogue code: BPH-211
BPH-203
BPH-203 pull handle with a knurled round bar set on a flat rectangular backplate, in a satin nickel-look finish. Fine diamond knurling runs the full length of the bar for a textured grip, and two round posts hold the bar clear of the plate.
The long backplate sits flat against the door or cabinet face and frames the handle. A pull handle like this is used to open and close doors, drawers and cabinet fronts.
Catalogue code: BPH-203
Iron Turner Pull Handle
The Iron Turner Pull Handle is a black iron door pull with a twisted centre grip and turned, tapering ends. Round button finials cap the top and bottom, and a collar at each end of the twist joins the bar to a mounting arm. Each arm ends in an elongated, pointed back plate with four screw holes for fixing to the door face.
BPH TWISTER
BPH TWISTER is a door pull handle with a flat bar that turns through a single twist toward its upper end. The bar has a dark bronze-look face with lighter golden edges, and it sits on two round standoff posts, one near each end, that hold it clear of the door.
Like any pull handle, it gives a hand-hold for pulling a door open, and the twisted bar makes it a decorative feature on the door face.
Catalogue code: BPH TWISTER
Iron Hooks13 products
SIH-10
SIH-10 is a black iron screw-in hook with a ball end, made to twist straight into a surface.
A pointed threaded screw shank projects from a round collar, and the hook curves up into a single open loop finished with a round ball tip and a turned ring below it. The hook body has a matt black finish.
Catalogue code: SIH-10
SIH-03
SIH-03 is a single wall hook from the Iron Hooks range with a decorative rabbit-silhouette backplate, in black with a hammered texture. The flat rabbit-shaped plate has one screw hole near its base. A single J-hook below it takes keys, towels, bags or coats.
Catalogue code: SIH-03
SIH-05
SIH-05 is a heart-top iron wall hook in black, with the heart formed by two scrolled ends that curl in to meet at the top. Below the heart sits a single screw hole for mounting, and the stem drops into one hook finished with a pointed knob tip. It suits hanging coats, towels, keys or bags.
Catalogue code: SIH-05
SIH-04
SIH-04 is a black L-shaped wall hook from the Iron Hooks range. It is made from a flat bar that bends out into a straight arm ending in a rounded knob. Two screw holes in the upright mount it flat to a wall, and the straight peg holds coats, bags, towels or hats. It has a smooth black finish.
Catalogue code: SIH-04
SIH-09
SIH-09 is an iron wall hook with a bone-shaped top bar and a single hook below, in a black finish.
The bone-shaped bar forms a decorative head, and a flat strap drops from its centre to a single upturned hook with a rounded tip. The surface has a textured look. It suits hanging coats, bags, keys or leads.
Catalogue code: SIH-09
SIH-01
SIH-01 is a black iron wall hook, a single robe hook for hanging coats, robes, towels or bags. A teardrop-shaped backplate carries two screw holes for wall or door mounting, and the arm curves out into one hook with a rounded tip. The matt black finish shows a lightly hammered surface.
Catalogue code: SIH-01
Door 8
"Door 8" is a black double wall hook from the Iron Hooks range, with clean angular lines for hanging coats, bags and towels. A long flat upper arm angles up and out from the backplate, and a short lower hook ends in a square upturned lip, so it gives two hanging points in one fitting. The backplate has two countersunk screw holes for wall or door mounting, and the whole hook has an even black finish.
Door 7
"Door 7" is an ornate black coat hook from the Iron Hooks range, styled in a traditional scroll pattern. A long curved upper arm ends in a rounded knob head, and below it two short curled hooks branch out from a scrolled backplate, giving three hanging points for coats, hats and bags. The whole surface carries a fine raised dot texture over a black finish, and the backplate has two screw holes for fixing to a wall or door.
SIH-02
SIH-02 is a black double coat hook from the Iron Hooks range, with acorn-shaped finials on both the upper arm and the lower hook. The two arms give two hanging points for coats, hats and bags. An oval backplate with two screw holes fixes it to a wall or door, and the whole hook has a textured matte black finish.
Catalogue code: SIH-02
SIH-07
SIH-07 is an owl-figure iron wall hook in glossy black. The owl top is fully modelled, with ear tufts, large round eyes and a textured feather pattern down its body. Beneath it, a flat stem with two screw holes runs down into a single hook ending in a ball tip, ready for coats, bags, towels or keys.
Catalogue code: SIH-07
Door 39
Iron double wall hook, catalogue code Door 39, with two curled hook arms either side of a central mounting strap. The strap has two recessed screw holes for screw fixing, and each arm curves down and back up into a flattened tip.
It has a dark antique-iron finish with a rugged, hand-worked look, and suits hanging coats, bags and similar items. It belongs to the Iron Hooks range.
Catalogue code: Door 39
SIH-11
SIH-11 is a black double wall hook from the Iron Hooks range, for hanging coats, bags, towels or tools. A flat backplate with rounded ends carries two J-shaped hooks. Each hook is fixed to the plate under a round rivet head. Two screw holes at the ends of the plate mount it to a wall. The hooks are made of flat bar with small upturned tips, in a matte black finish.
Catalogue code: SIH-11
SIH-08
SIH-08 is a bird-figure iron wall hook in black, with a perched songbird sitting on top of the hook stem. The bird shows a textured feather pattern on its wings and a long tail. The stem carries two screw holes for mounting and curves into a single hook with a ball tip, for hanging coats, bags, towels or keys.
Catalogue code: SIH-08
Door Knobs12 products
Knit Door Knob
Knit Door Knob: a gold-tone door knob with a basket-weave textured face, mounted on a round rose for opening and closing doors. The round knob pairs a mirror-polished body with an inset woven pattern across its flat top. A turned neck joins it to a round stepped rose with screw holes for fixing to the door.
Linus Door Knob
Linus Door Knob: a polished chrome-look door knob with a ringed, beehive-style ball on a round rose, used to grip and turn or pull a door. The spherical knob carries fine horizontal rings around a smooth, flat crown and sits on a short collared neck. The round rose repeats the ringed pattern in concentric steps, so the mirror-bright finish runs evenly from knob to base.
Lion Door Knob
Lion Door Knob: a gold-tone door knob with an embossed lion's head on its face, mounted on a round rose for opening and closing doors. The detailed lion mask, with flowing mane and open mouth, sits inside a smooth raised border on a broad, slightly oval knob. The bright polished finish carries onto a round stepped rose with countersunk screw holes.
Egg Door Knob
An egg door knob with a smooth, plain oval head, used to pull open and close a door. It mounts on a round rose with a stepped edge, joined by a short cylindrical neck.
The surface is a bright, mirror-polished golden brass tone with clean, simple lines. Listed under Door Knobs.
Iron Oval Door Knob
Iron Oval Door Knob: a black iron door knob on an oval backplate, for opening and closing doors. The round knob has a rough, uneven textured surface and stands out from a flat oval plate with a raised stepped edge. Two screw holes, one above and one below the knob, fix the plate to the door.
Decorative Door Knob
A decorative door knob on a matching round rose, used to pull open and close a door. The knob has a broad mushroom-shaped head with a deeply embossed petal pattern around a smooth central dome, and the rose repeats the same raised floral design.
A slim waisted neck joins knob and rose, and the whole piece has a polished golden brass-tone finish. Listed under Door Knobs.
Spiro Door Knob
Spiro Door Knob: an antique brass-look door knob with a spiral-twist ball, mounted on a round rose for opening and closing doors. Deep curved grooves twist across the ball, with darker recesses set against brushed raised ridges. A plain waisted neck joins the knob to a round stepped rose with three countersunk screw holes for fixing to the door.
Octagon Door Knob
Octagon door knob with a faceted eight-sided grip set on a matching octagonal rose, for opening and closing a door. The knob rises from the rose on a short round neck, and its stepped top face and angled sides give it a crisp geometric profile.
The whole piece carries a polished golden, brass-tone finish. The rose has two countersunk screw holes for fixing it to the door face.
Iron Rectangular Door Knob
An iron door knob on a rectangular backplate, with a round knob for pulling open and closing a door. The backplate has a stepped, framed edge and four screw holes, one in each corner, for fixing to the door.
Knob and plate share a black finish with a textured, hand-forged look. Listed under Door Knobs.
Flora Door Knob
Flora Door Knob: an antique bronze-look door knob with a fluted, mushroom-shaped head on a round rose, made for opening and closing doors. Rounded ribs radiate from the centre of the crown down to a smooth collar, with darker shading in each groove. A turned neck carries the knob to a round stepped rose fixed with three countersunk screw holes.
HEXAGON PETAL DOOR KNOB
The Hexagon Petal Door Knob is a six-sided door knob with an embossed petal motif on its face, set on an ornate round rose and paired with a matching euro-profile escutcheon, all in an antique gold tone.
The knob face carries a six-petal flower around a raised round centre, framed by the hexagon's bevelled edges. The rose and the escutcheon share the same scrolling leaf relief inside a twisted rope border, and each has screw holes for fixing to the door. A beaded edge outlines the escutcheon's euro-profile keyhole, which finishes the cylinder lock opening so knob and lock plate match. The knob opens the door latch with a turn.
Rope Door Knob
A rope door knob with a twisted rope-edge border framing a smooth flat top, mounted on a matching round rose, used to pull open and close a door.
The rope trim runs around both the knob face and the edge of the rose, and a short rounded neck joins the two. The finish is a polished golden brass tone. Listed under Door Knobs.
Cabinet Knobs8 products
SBK-02 Cabinet Knob
SBK-02 cabinet knob, a T-shaped pull in a satin golden finish for cabinet doors and drawers. The bar swells gently toward each end and finishes in stepped, ringed tips, giving it a classic, decorative profile.
The bar sits on a single flared stem that widens toward the mounting base, so the knob fixes at one point. The brushed golden surface has a soft, even sheen.
Catalogue code: SBK-02
SBK-05 Cabinet Knob
SBK-05 round fluted cabinet knob in a satin golden finish, for cabinet doors and drawers. Its domed head is ribbed with deep grooves that radiate from a central point, giving a scalloped, flower-like edge.
A narrow neck joins the head to a round, stepped base that sits against the door or drawer front.
Catalogue code: SBK-05
SBK-KNURLING
Knurled round cabinet knob SBK-KNURLING in an antique brass/bronze-look finish, for cabinet doors and drawers. Its cylindrical head has a fine diamond knurl around the side and a smooth, brushed flat face, set on a narrow neck above a knurled round base rose.
The diamond knurl gives a textured grip. It belongs to the Cabinet Knobs range.
Catalogue code: SBK-KNURLING
SBK-04 Cabinet Knob
SBK-04 tapered T-bar cabinet knob in a satin golden finish, for cabinet doors and drawers. The bar is widest at the centre and narrows to slim flat ends in a spindle shape, giving a streamlined profile.
It rests on a tapered stem that widens toward the mounting base, and the brushed golden surface has a soft sheen.
Catalogue code: SBK-04
Looped-T—Knob
The Looped-T Knob is a T-bar cabinet knob that pairs a black knurled bar with a gold-tone loop and base. The cylindrical black bar has a fine diamond knurl for grip and sits in an open looped bracket on a round gold-tone stem and rose. It suits cabinet doors and drawers where a two-tone pull is wanted.
SBK-01 Cabinet Knob
SBK-01 is a round fluted cabinet knob in a brushed gold, brass-tone finish. The wide cylindrical head has a smooth flat top and fine vertical ribs around its side, set on a slim stem and a flat round base. It serves as a pull for cabinet doors, drawers and wardrobes.
Catalogue code: SBK-01
SBK-03 Cabinet Knob
SBK-03 cabinet knob in a satin golden finish: a simple T-bar with fully rounded ends, for cabinet doors and drawers. The straight, capsule-shaped bar sits on a short cylindrical stem, giving a clean, minimal look with a brushed surface.
The knob fixes at a single point through its stem.
Catalogue code: SBK-03
SBK-06 Cabinet Knob
SBK-06 black T-bar cabinet knob with a faceted bar, for cabinet doors and drawers. The bar is faceted along its full length with flat sides and flat ends, giving a crisp, geometric look in a matte black finish.
A slim round stem holds the bar at its centre and fixes the knob at a single point.
Catalogue code: SBK-06
Door Knocker11 products
SBK-05
SBK-05 is a door knocker with a classic urn-style outline in a polished gold-tone finish. A large oval back plate sits between a turned finial at the top and a bulb finial at the base, with small scrolled points around the plate. The U-shaped knocker swings from two rounded pivots beside the plate and meets in a diamond-detailed striking point near the bottom. Fixed to a front door, it gives visitors a traditional way to knock and announce their arrival.
Catalogue code: SBK-05
Lion Door Knocker
Lion door knocker in black, a lion-head knocker for front doors from the Door Knocker range. The lion's face and flowing mane are finely detailed in raised relief. Below the head, a U-shaped stirrup knocker hangs from a pivot bar on both sides and ends in a turned, ribbed knob that strikes the door. Mounted on the door face, it lets visitors announce themselves.
SBK-07
Fox head door knocker SBK-07, a novelty knocker for a front door. The design shows a fox's head with pointed ears, its long brush tail rising above as the backplate and its two front legs hanging below as the knocker.
Fine engraved lines pick out the fur across the head, tail and legs, under a bright golden, brass-tone finish. A fixing hole sits near the tip of the tail.
Catalogue code: SBK-07
SBK-02
Urn door knocker SBK-02, a traditional knocker for a front door. A smooth urn-shaped backplate with finials at the top and bottom carries a rectangular bar, from which a slim U-shaped knocker swings down.
The knocker meets a plain oval strike plate near the base. The whole piece has a polished pale-golden, brass-tone finish with clean, simple lines.
Catalogue code: SBK-02
SBK-04
SBK-04 is a slim urn-style door knocker with a tall, narrow profile and a polished gold-tone finish. Its tapering body rises to a stepped, spire-like finial and ends in a teardrop finial below. A long, narrow U-shaped knocker loop hangs from two pivots under the flat-faced head and wraps around the body down to the base. Fixed to a front door, it lets visitors knock and announce their arrival.
Catalogue code: SBK-04
SBK-08
Lion head door knocker SBK-08, a decorative knocker for a front or entrance door. A detailed lion face with a deeply lined mane forms the backplate, and a round ring hangs from pivots on either side of the muzzle, with a turned collar at its base where it strikes the door.
The piece has a bright golden, brass-tone finish, with the textured mane contrasting the smooth polished ring. Two small fixing holes sit at the sides of the backplate.
Catalogue code: SBK-08
Pin Door Knocker
Pin door knocker in a satin chrome-look finish, a slim, upright knocker for front doors from the Door Knocker range. A turned urn finial crowns the top, and a long narrow loop hinges just below it, swinging down over a tapered body that ends in a sharp point. Mounted on the door face, it lets visitors announce themselves.
SBK-03
SBK-03 is an urn-style door knocker trimmed with rope-twist detailing, in a polished light-gold finish. A rectangular bar framed by a rope-edge border crowns the rounded urn body, which is topped by a rope ring and an egg-shaped finial. The U-shaped knocker swings from pivots at both ends of the bar and carries an oval, rope-edged plate at its striking point, above a teardrop finial at the base. Fixed to a front door, it gives visitors a classic way to knock.
Catalogue code: SBK-03
Door Knocker
Door knocker for front and entrance doors, offered in three designs from the Door Knocker range. One is a polished chrome-look ring knocker: a round ring hangs from a domed pivot on a round rose and strikes a small round stud below. Another is a slim satin chrome-look knocker with a turned urn finial on top and a long loop that swings over a tapered, pointed body. The third is a black lion-head knocker with a finely detailed mane and a U-shaped stirrup knocker with a turned knob at its base. Each mounts on the door face, and lifting and dropping the knocker lets visitors announce themselves.
SBK-06
Ring door knocker SBK-06 in an antique brass-tone finish, for a front or entrance door. A teardrop-shaped stirrup ring hangs from a round mounting boss, and its lower curve carries a raised leaf and floral relief.
A round striker stud sits below the ring where it meets the door. The darker recesses around the relief set off the brushed bronze-gold highlights.
Catalogue code: SBK-06
SBK-01
Classical face door knocker SBK-01, an ornamental knocker for an entrance door. The backplate is a sculpted female face crowned with a wreath of leaves in her hair, and a curved drop knocker with leaf-carved arms hangs from pivots beside the face.
An oval plate with a beaded rim sits at the base where the knocker strikes. The piece has a polished pale-golden, brass-tone finish.
Catalogue code: SBK-01
Handrail Brackets5 products
SHB-1003
Brushed satin nickel-tone handrail bracket SHB-1003, with an angled tubular arm set between a round wall plate and a rectangular rail plate. It holds a stair or wall handrail out from the wall on a bent arm. The round wall plate has countersunk screw holes, and the narrow rail plate on top carries a screw hole at each end for fixing to the underside of the rail.
Catalogue code: SHB-1003
SHB-1004
Polished chrome-tone handrail bracket SHB-1004, with a long, sweeping curved tubular arm. It holds a handrail out from the wall. The arm rises from a round wall plate with a raised centre collar and screw holes, and ends in an oval rail plate with a screw hole at each end for fixing to the rail.
Catalogue code: SHB-1004
SHB-1005
Handrail bracket SHB-1005 on a round rose, in a matt satin chrome-tone finish, with a curved arm that broadens where it meets the rose. It holds a handrail clear of the wall. The rose has a stepped, recessed centre ring around the base of the arm, and the rectangular rail plate on top has shaped ends and a countersunk screw hole at each end.
Catalogue code: SHB-1005
SHB-1002
Satin chrome-tone handrail bracket SHB-1002, with a curved arm that flares smoothly into a round base. It supports a handrail out from the wall. The round base carries countersunk screw holes, and the rectangular rail plate on top has a screw hole at each end for fixing to the rail.
Catalogue code: SHB-1002
SHB-1001
Polished gold-tone handrail bracket SHB-1001, with a curved arm on a round base. It supports a handrail out from the wall. The round base has countersunk screw holes, and the arm meets a rectangular rail plate with a screw hole at each end for fixing to the rail.
Catalogue code: SHB-1001
Brass Lever on Rose10 products
BLR-07
BLR-07 lever on rose door handle in a black finish, from the "Brass Lever on Rose" range. A lever on rose operates a door latch, with the round rose plate set against the door face.
The lever has a square-section neck that turns at a right angle into a round grip covered in fine diamond knurling, which gives a textured hold. The rose is round with a raised, stepped centre.
Catalogue code: BLR-07
BLR-06
BLR-06 lever handle on a round rose, from the "Brass Lever on Rose" range, in a polished gold-tone brass-look finish with a finely fluted grip. Lengthwise ribs run along the cylindrical grip, set between a smooth polished collar at the neck and a smooth band at the tip. A small fixing screw sits on the rim of the round rose.
A lever on rose mounts on the face of a door and works the latch when the lever is pressed down.
Catalogue code: BLR-06
BLR-03
BLR-03 lever handle on a round rose in a polished chrome-look finish, from the "Brass Lever on Rose" range, with a deep diamond-knurled cylindrical grip. A mirror-bright collar at the neck leads into the crosshatched grip, which ends in a smooth band at the tip. A small fixing screw sits on the rim of the round rose.
A lever on rose mounts on the face of a door and works the latch when the lever is pressed down.
Catalogue code: BLR-03
BLR-08
BLR-08 is a polished gold-tone brass lever-on-rose door handle with a diamond-knurled round grip.
The stepped round rose and the square-section arm carry a bright, polished gold finish, and the cylindrical grip is covered in fine crosshatch knurling in a softer brass tone. Like any lever handle, it opens the door latch with a downward press.
Catalogue code: BLR-08
BLR-05
BLR-05 door lever handle on a square rose, from the "Brass Lever on Rose" range, with a wide flat lever in a brushed antique brass-look finish. The lever rises from the square backplate in a smooth curved neck and runs out into a broad, flat-faced grip with squared ends. Two small fixing holes sit on the edge of the rose.
A lever on rose mounts on the face of a door and works the latch when the lever is pressed down.
Catalogue code: BLR-05
BLR-02
BLR-02 lever handle on a round rose in a matte black finish, from the "Brass Lever on Rose" range, with a diamond-knurled cylindrical grip. The lever steps out from the rose on a short round neck, with a smooth collar before the knurled section and a smooth band at the tip.
A lever on rose mounts on the face of a door and works the latch when the lever is pressed down.
Catalogue code: BLR-02
BLR-04
BLR-04 is an ornate brass lever on rose door handle, with an embossed leaf and floral pattern on both the lever and the round rose. It is used to open and close a door latch.
The finish is an antique brass look, with raised highlights set against a darker stippled background. A fluted, rounded collar joins the lever to the rose, and the lever widens into a rounded, teardrop-shaped end.
Catalogue code: BLR-04
BLR-09
BLR-09 is a brass lever-on-rose door handle in a dark brushed silver tone, with a diamond-knurled round grip.
A square-section arm leaves the stepped round rose at a right angle and runs into a cylindrical grip covered in fine crosshatch knurling. The smooth arm and rose keep a clean outline. Like any lever handle, it opens the door latch with a downward press.
Catalogue code: BLR-09
BLR-01
BLR-01 lever handle on a round rose, from the "Brass Lever on Rose" range, with a diamond-knurled cylindrical grip in a brushed antique brass-look finish. A short plain collar at the neck leads into the textured grip, which ends in a smooth band at the tip. The round rose carries a small fixing hole on its edge.
A lever on rose mounts on the face of a door and works the latch when the lever is pressed down.
Catalogue code: BLR-01
BLR-10
BLR-10 is a brass lever-on-rose door handle with a tapered, angular lever in a brushed antique-bronze tone.
A square-edged neck rises from the slim round rose and turns into a faceted lever, with a sculpted ridge running along its face as it narrows toward a squared-off tip. Like any lever handle, it opens the door latch with a simple downward press.
Catalogue code: BLR-10
Lever Handles17 products
SRH-106
SRH-106 is a two-tone door lever handle on a round rose, with a gently curved lever for opening and closing a door latch. The round rose and the lever neck have a bright, mirror-polished silver finish, and the grip section has a contrasting brushed satin finish.
The lever sweeps out from a short neck and curves slightly along its length. Its tip is cut square, and the brushed grip sits in a polished cradle at the neck.
Catalogue code: SRH-106
Door 26
"Door 26" is a scroll lever door handle on a rectangular keyhole backplate, from the Lever Handles range, finished in bright polished silver tone. The lever rises from a shaped neck and runs out to a curled scroll tip. Below the lever, a keyhole cut-out suits a lever lock. The flat, square-edged backplate is fixed with four screw holes, one in each corner.
SRH-107
SRH-107 is a door lever handle on a round rose, finished all over in brushed satin silver, for opening and closing a door latch. The lever curves gently along its length from a short neck. The rose shows two fixing holes, one on each side of the neck.
The single-tone satin finish runs across the rose, the neck and the grip, and the lever ends in a square-cut tip.
Catalogue code: SRH-107
SRH-109
SRH-109 lever handle on a round rose, pairing a cream ceramic-look grip with polished chrome-look fittings. The tapered cream grip sits between a shaped chrome-look collar and a small ball finial at its tip. The domed round rose has two fixing lugs, and the neck has turned rings and a ball knuckle, giving the handle a traditional, period style. It is supplied as a single lever on rose for operating a door latch.
Catalogue code: SRH-109
SRH-101
SRH-101 lever handle on a round rose with a slim wave-shaped lever in a satin nickel-look finish. The lever leaves a stepped round rose, dips and then sweeps upward to a tapered, pointed tip, giving a sleek contemporary line. The brushed finish runs evenly over lever and rose. It is supplied as a single lever on rose for operating a door latch.
Catalogue code: SRH-101
SRH-104
SRH-104 is a door lever handle on a round rose with a twisted, wave-shaped lever in a polished chrome-look finish. The lever turns along its length and widens towards a squared tip, rising from a ribbed neck set on a stepped round rose.
As a lever on rose, it operates the door latch with a downward press.
Catalogue code: SRH-104
SRH-108
SRH-108 is a two-tone door lever handle on a round rose, pairing polished chrome-look accents with a satin chrome-look grip. A gently curved lever flares slightly at the tip, and a polished collar joins it to the stepped round rose, whose outer ring carries the same satin finish.
Like any lever on rose, it operates the door latch with a downward press.
Catalogue code: SRH-108
SRH-105
SRH-105 is a twisted door lever handle on a round rose in a two-tone finish: a bright chrome-look rose with a slightly darker, satin nickel-tone lever. The lever twists along its length to a flared, squared tip and rises from a ribbed neck on the stepped rose.
As a lever on rose, it operates the door latch with a downward press.
Catalogue code: SRH-105
SRH-111
SRH-111 is a lever handle on a round rose, paired with a matching round euro-profile escutcheon, both in a brushed silver-tone finish.
The lever has a teardrop-shaped head with a raised outline tracing its edge, flowing into a broad lever that widens slightly toward a rounded tip. Ringed detail circles the neck where it meets the stepped rose. The escutcheon carries a euro-profile keyhole cut-out and finishes the cylinder lock opening on the same door, so handle and lock plate match. The lever opens the door latch with a downward press.
Catalogue code: SRH-111
Door 25
"Door 25" is a straight lever door handle on a short rectangular backplate, from the Lever Handles range, in a bright polished silver-tone finish. The lever is plain and square-edged, running straight out from a rounded neck for a simple, classic look on a latch door. The compact plate is flat with square edges and fixes with four screw holes, one in each corner.
Door 17
"Door 17" lever handle on a round rose, with a scrolled lever in a bright, polished chrome-look finish for operating a door latch. The lever grows out of a stepped, ringed collar, runs out in a smooth curve and turns down gently at the tip, giving a classic scroll profile. A round, flat-faced rose sits against the door and covers the fixing. It is supplied as a single lever on rose.
Door 27
"Door 27" is a lever door handle on a shaped keyhole backplate, from the Lever Handles range, in a bright polished silver-tone finish. The tall backplate has arched, notched ends and a stepped moulded border, with a keyhole cut-out below the lever for use with a lever lock. The lever sweeps out in a gentle curve to a flared, slightly upturned tip, and its round boss carries a domed end cap. Three screw holes, two at the top and one at the bottom, fix the plate to the door.
SRH-102
SRH-102 is a straight round-bar lever door handle on a round rose, from the Lever Handles range, in a soft satin silver-tone finish. The tubular lever runs straight out from an angled neck, giving a clean, modern look. A small grub screw on the neck holds the lever on its spindle, and the slim circular rose sits flush against the door face.
Catalogue code: SRH-102
SRH-112
SRH-112 is a lever-on-rose door handle with a sweeping, wave-curved lever set on a round rose, in a brushed silver-tone finish.
The lever rises from a rounded, teardrop-shaped neck and runs into a long curve that dips through the middle and turns up at the tip. The stepped round rose sits against the door face and carries the lever. Like any lever handle, it opens the door latch with a simple downward press.
Catalogue code: SRH-112
SRH-103
SRH-103 is a door lever handle on a round rose with a flowing, curved scroll lever in a polished chrome-look finish. The lever swells near the neck, dips in a soft S-curve and tapers to a slim pointed tip, set on a ribbed neck over a stepped round rose.
As a lever on rose, it operates the door latch with a downward press.
Catalogue code: SRH-103
SRH-110
SRH-110 lever handle on a round rose, a door lever with a satin chrome-look finish from the Lever Handles range. The lever is a smooth round bar that curves back toward the door at its tip, the return-to-door shape that keeps the end close to the door face. A dark collar sits where the lever meets the rose. Like any lever handle, it turns to work the door's latch.
Catalogue code: SRH-110
Door 58
Door 58 is a lever handle on a long rectangular backplate with a keyhole cut-out, for doors fitted with a lock. The lever is a round bar that runs straight out and turns back towards the door at its end. The handle and backplate both have a smooth satin silver finish, with a dark ring where the lever meets the plate.
The backplate has rounded corners, and the keyhole sits in its lower half, below the lever.
Catalogue code: Door 58
Other Accessories12 products
Door 44
Black house letters with a hammered-look textured finish, catalogue code Door 44, for marking a door, gate or wall. The letters 'A' and 'Z' are bold serif capitals with a dark, rugged surface texture and slightly raised edges.
Each letter carries two screw holes for fixing flat to the surface. They sit in the Other Accessories range of builder's hardware.
Catalogue code: Door 44
Door 62
Door 62 is a black house number '2' with a hammered, textured surface, for showing a house, gate or door number. The numeral has a curled top and a flat base with an angled end. Its black finish carries an uneven, beaten texture across the face.
Two countersunk fixing holes, one in the upper curve and one in the base, let it be screwed flat to a door or wall.
Catalogue code: Door 62
TOILET PAPER HOLDER BRASS
A brass toilet paper holder that mounts on the wall to hold a toilet roll within easy reach in a bathroom or washroom. A round wall plate with three screw holes carries an angled post, and a straight horizontal arm runs from it to a round end cap, so the roll slides onto the open end.
The whole piece has a soft satin brass-tone finish with clean, simple lines. Listed under Other Accessories.
DOOR SIGNS
Door sign marked "FEMALE": an upright rectangular plate in a brushed silver-look finish, carrying a dark female pictogram, a horizontal rule and the word "FEMALE" in bold capitals. Four round fixing points sit in the corners for mounting the plate on a door. A sign of this kind marks a door for women, such as a washroom.
GENTS DOOR SIGN
Gents door sign in an antique brass-look finish, carrying the word "GENTS" in bold raised capitals on a dark, textured ground. It marks a men's washroom door.
The plate has a raised border and rounded end tabs, each with one screw hole for fixing flat to the door. It belongs to the Other Accessories range of a builder's hardware maker.
TOILET PAPER HOLDER IRON
Iron toilet paper holder in black, with a wrought-style scroll bracket and a straight arm that holds a toilet roll. The flat strap rises to a wall plate with two screw holes and a fan-shaped tip, then curls down into a spiral scroll.
The round arm projects from the scroll and ends in a flat disc cap that keeps the roll in place. It is listed under Other Accessories in the seller's builder's hardware range.
Door Sign (Male)
Door sign for a male restroom: a rectangular brushed silver-tone metal plate printed with a black male pictogram, a horizontal rule and the word "MALE". It marks a washroom or changing-room door clearly at a glance.
The plate has a fixing hole in each of its four corners for screwing flat onto a door or wall. It is listed under Other Accessories in the seller's builder's hardware range.
PUSH DOOR SIGN
Push door sign in an antique brass-look finish, with the word "PUSH" in raised letters on a dark, textured ground. It tells people which way to open a door.
The plate has a raised border and rounded end tabs, each with one screw hole for fixing to the door face. It sits under Other Accessories in the seller's builder's hardware range.
Door 45
Door 45 is a house letter 'A' in a pale, polished metallic finish, for marking a house, flat or door. The letter has a flat top, straight angled legs with flared feet and a cut-out centre.
Two countersunk fixing holes, one near the top and one in the lower left foot, let it be screwed flat to a door or wall.
Catalogue code: Door 45
Door 34
Cabin hook and eye in a satin chrome-look finish, catalogue code Door 34, for holding a door, gate or window shut or open. A long, slim hook bar swings from a ring on one rectangular plate, and its hooked end drops into an eye set on a second rectangular plate.
Each plate has two screw holes for surface fixing. It sits in the Other Accessories range of builder's hardware.
Catalogue code: Door 34
WINDOW CASEMENT STAY
Window casement stay in a polished brass-tone finish, used to hold a hinged casement window open at a chosen position. The stay arm pivots on a hinged bracket at one end and ends in a curved, spoon-shaped grip at the other.
Holes along the arm drop over upright pins set on small base plates, so the window can be held at different openings. It is listed under Other Accessories in the seller's builder's hardware range.
TOILET DOOR SIGN
Toilet door sign with the word "TOILET" in raised serif capitals on a dark, textured ground, finished in an antique brass look. It marks a washroom door.
The rectangular plate has clipped corners, a raised border and a screw hole at each end, set inside a raised ring, for fixing flat to the door. It is part of the Other Accessories range of a builder's hardware maker.
Other products6 products
Door 9
"Door 9" round escutcheon for a euro-profile cylinder lock, in a satin silver-tone finish. The flat disc has a keyhole-shaped euro-profile cut-out at its centre and two countersunk screw holes, one on each side, for fixing to the door face. It frames the lock cylinder neatly where it passes through the door and is supplied as a single plate.
Door 23
Door 23 is a gold-tone rectangular door letter plate with a raised rope-twist border running around all four edges. A recessed inner panel sits inside the border and forms the letter flap.
On a front door, a letter plate frames the letterbox opening and covers the slot.
Door 15
"Door 15" black lever handle on a rectangular backplate with wavy top and bottom edges, giving a rustic look to a door latch set. The backplate has a hammered-texture face and four screw holes near its corners. The rounded lever rises from a domed boss, runs straight out and curls back at the end into a hooked tip with a small stud. It is finished in black throughout and supplied as a single lever on backplate.
Door 16
"Door 16" black lever handle on a tall rectangular backplate with a rope-twist border, for operating a door latch. The backplate has a hammered-texture face and four screw holes, two near the top and two near the bottom. The scrolled lever carries a matching rope-twist edge along its upper side and ends in a rounded, curled tip with a small button, with a button cap at the pivot too. The whole piece has an even black finish.
Door 32
Lever door handle on a long backplate in an antique brass-look finish, catalogue code Door 32, for opening and closing a door. The tall plate has shaped, scalloped ends, a raised inner panel and four black cross-head fixing screws.
The lever rises from a round collar, carries a turned band and swells into a tapered grip with a small end knob.
Catalogue code: Door 32
Door 22
Door 22 is a plain rectangular door letter plate in a satin chrome-look finish, with clean flat edges and a recessed inner panel that forms the letter flap.
On a door, a letter plate frames the letterbox opening and covers the slot.
The company
Sunshine Metal Industries is an Aligarh-based manufacturer and exporter of builder's hardware: lever handles, pull handles, iron and brass hooks, door knobs, door knockers, brass lever on rose sets, cabinet knobs, handrail brackets and door accessories. A family-owned business in the lock city of Aligarh, Uttar Pradesh, it has supplied builder's hardware since 1998, made in Brass, Zinc, Iron, Copper and Aluminium, with 100% in-house production. Alongside builders' hardware, it also makes metal artware. The range covers 119 products. Lever handles form the largest family (17: SRH-101 to SRH-112 plus numbered Door designs 17, 25, 26, 27 and 58), followed by pull handles (14: BPH-135 to BPH-211, SSPH-01 and SSPH-02 in standard and black, the BPH Twister, a twisted door pull and an iron turner pull handle) and iron hooks (13: SIH-01 to SIH-11 plus Door 7, 8 and 39). Door knobs (12) come in designs such as Hexagon Petal, Rope, Egg, Linus, Spiro, Flora, Lion, Knit, Octagon and decorative styles, plus iron oval and iron rectangular knobs. Other accessories (12) include door signs (push, toilet and gents), a window casement stay, toilet paper holders in iron and in brass, and Door 34, 44, 45 and 62. Brass hooks (11: SBH-01 to SBH-10 plus a coat and hat hook), door knockers (11: SBK-01 to SBK-08 plus lion and pin knockers), brass lever on rose (10: BLR-01 to BLR-10), cabinet knobs (8: SBK-01 to SBK-06, a knurled knob and a looped-T knob) and handrail brackets (5: SHB-1001 to SHB-1005) complete the line, with six further numbered Door designs (9, 15, 16, 22, 23 and 32). All production is in-house: lathe, grinding, milling, drilling, tapping, lancer and power press work; sand and gravity casting; Zamac die casting; a forging machine with a variable load capacity of up to 400 tons; electroplating and anodizing with ultrasonic degreasing; electrophoretic lacquer, electrostatic spray lacquer and an electrostatic sealer; polishing with a range of coatings; powder coating; a CNC wire cut machine; and an automatic polybag packing machine. Assembly and packaging are handled as each product requires. A research and tooling department develops custom products in AutoCAD, there is a testing lab, and the design team translates architect designs into clear drawings for manufacturers and skilled workers, giving clients tailor-made solutions for their specific needs. Quality controls run at every stage of manufacture, a focus that has drawn foreign buyers, and every shipment is inspected and packed safely before dispatch. Environmental measures include an Effluent Treatment Plant (ETP), a Safety, Health and Environment Policy, and periodic forestation and rainwater harvesting campaigns. Quality standards: ISO 9001:2015; also ISO 9001:2008, ISO 14001 and ISO 18001.
| Legal name | Sunshine Metal Industries |
| Established | 1998 |
| Location | Aligarh, Uttar Pradesh, India |
| Category | Architectural Hardware |
| Custom orders | Made to the buyer's spec |
| Addresses | Factory/Work AddressD-78, Sector 1, Tala Nagri UPSIDC Industrial Area, Ramghat Road, Aligarh, Uttar Pradesh - 202002Office Address12, Bank Colony, Laxmi Bai Marg, Marris Road, Aligarh, Uttar Pradesh - 202001 |
| info@sunshinemetalindustries.com | |
| Catalogue | 119 products across 10 categories |
| Exports | Yes |
| Other phones | +91 6397155519 (Contact Numbers) |
Contact this supplier
Quality & certificates
ISO 9001:2015ISO 9001:2008ISO 14001ISO 18001
At Sunshine Metal Industries, we meticulously uphold stringent quality controls at every stage of our manufacturing process. Our relentless dedication to excellence has not only captured the attention of foreign buyers but has also solidified our esteemed reputation in the global market.
The infrastructure
| In-house facility | Lathe, grinding, milling, drilling, taping, lancer, and power press equipment; casting (sand and gravity) |
| In-house facility | Forging machine with a variable load capacity of up to 400 tons |
| In-house facility | Electrostatic Sealer |
| In-house facility | Electrophoretic Lacquer |
| In-house facility | Spray Lacquer with Electrostatic Technology |
| In-house facility | Zamac Die Casting Equipment |
| In-house facility | Plant Electroplating and Anodizing Using Ultrasonic Degreasing |
| In-house facility | polishing with a range of coatings |
| In-house facility | Computerized Numerical Control in Powder Coating Wire Cut Machine C.N.C. |
| In-house facility | Polybag Packing Machine with Automatic Function |
Other services
| Service | Note |
|---|---|
| Custom product development | Custom product development through AutoCAD software |
| Design Capability | Translate architect designs into more easily understood drawings for manufacturers and skilled laborers in the manner of their choice. |
| Process Availabilities | Depending on the needs of the product, various processes, including electro-plating, electrophoretic lacquering, polishing, as well as assembly, packaging may be required. |
| facebook.com/Sunshine22512 | |
| instagram.com/sunshine__locks | |
| linkedin.com/company/sunshine-hardware | |
| Website | sunshinemetalindustries.com |
What's verified
Shared by the seller
In their own words
119Product photographsTheir own catalogue photography.
4Certifications listedISO 9001:2015, ISO 9001:2008, ISO 14001Seller-stated
Disclaimer
Information shown here is compiled from the details provided by the seller.
Videos & social