Furniture suppliers in India

Coffee Table

Blossom coffee table set of 2 in black powder-coated brass, with a large and a small round table for a living room or lounge. Each table has a round hammered metal top with a dimpled, rippled surface and a raised edge, resting on an open wire base of stacked rings joined by crisscrossing diagonal rods. The two sizes can be grouped together or used apart, as a coffee table and a side table. The BLACK POWDER COATED finish gives both pieces a matt black look. The set is offered as a custom design. Material: BRASS. Finish: BLACK POWDER COATED. Item Size Large: 32 W X 32 L X 13"H | Item Size Small: 26 W X 26 L X 12"H Catalogue code: TB-1638(Set of 2)

Ottoman

Director style accent stool / ottoman in black leather on a polished steel X-frame, catalogue code BH-1557. A leather sling seat stretches between two pairs of crossed steel legs, giving the look of a director's chair in a compact footstool form. It serves as an accent seat, a footrest or extra seating. Material is steel and leather, with a steel polished finish. Size is 17x23.5x18. It is made as a custom design, shown as a reference piece of artisan work. Catalogue code: BH-1557

Accent Table

Beckham Nested Accent Tables, a set of two brass nesting side tables in a polished brass finish, length 41 cm, width 51 cm and height 58 cm. The smaller table slides under the larger one to save space and pulls out when extra surface is needed. Each has an oval top with rounded ends in deep green with pale veining, set in a slim gold-tone band with square corner posts. Tapered gold-tone legs finish in small dark feet. The set is a custom design, made to show the maker's artisan and manufacturing work. Material: brass. Finish: polished brass. Catalogue code: CVFNR4539

Bench

Modernist brown hide bench with metal legs, H-1207, made in steel and leather as a custom design. Its long, box-shaped seat is covered in hide patterned with brown, tan and white patches and fine speckles, joined in panels, and it stands on two U-shaped sled legs in polished steel. The bench gives seating along its full length, pairing warm brown hide with bright metal for a modern look. The finish is steel polished and the size is 60x18x17. Catalogue code: H-1207

Ottoman

Director style accent stool in brown leather on a gold plated steel X-frame, size 17x23.5x18. A brown leather sling seat with stitched edges stretches between two top rails, and the base is a crossed X-frame of square steel tube with small square end caps at the seat corners. The finish is gold plated, so the warm gold frame contrasts with the brown leather. As an ottoman or accent stool, it adds extra seating or a foot rest. All designs in this collection are custom designs. Catalogue code: ST-1463

Bench

The Hampton Bench is a long metal bench with a black powder-coated frame, sized Length -127cm, Width- 36cm, Height- 56cm. It is made as a custom design. The seat is a row of six padded cushions in soft grey and cream tones with a hair-on texture, laid across the top of the frame. The open frame is built from square-section black metal tubing, with a centre post on each long side, a low stretcher frame near the floor and small feet. Material is listed as Metal and the finish as Black, Powder Coated. It works as seating at the foot of a bed, in an entryway or along a hallway. Catalogue code: CVFNR5039

Ottoman

"HUUDSON" counter stool in tan leather on a black powder coated steel frame, size 18x20x35. The moulded bucket seat with a low curved back is covered in tan leather, finished with contrast white stitching along its edges. It sits on a slim sled-style base of black steel rod, with crossbars between the legs that also serve as a foot rest. The frame finish is black, powder coated. At counter height, it suits a counter. All designs in this collection are custom designs. Catalogue code: CH-1550

Bench

Modernist black hide bench with metal legs, H-1206, built in steel and leather as a custom design. The long, box-shaped seat is upholstered in hide with bold black-and-white patches joined in three panels, and it rests on two U-shaped sled legs in polished steel. As a bench it gives seating along its length, with a graphic, modern look from the contrast of patterned hide and bright metal. The finish is steel polished and the size is 60x18x17. Catalogue code: H-1206

Accent Table

The Bassist Accent Table is a round metal accent table, listed in metal and marble with a polished finish. It is made as a custom design. The design pairs a taller and a lower round table that nest together, the smaller one sliding under the larger to save floor space. Each has a slim gold-tone metal frame with straight legs, a ring base and a flat ring under the top. The tops are clear and glass-like with a green-tinted edge, set into the frame rim. Small dark feet sit under each leg. Overall size is listed as Length -50cm, Width- 50cm, Height- 57cm, a size suited to use beside a sofa, chair or bed. Catalogue code: CVFNR4208

Bar Stool

Finished in tan leather, the HUDSON LEATHER BAR STOOL TAN is a bar stool on a black steel frame. It is made as a custom design. Its light orange-tan leather seat is shaped as a bucket shell with a curved backrest and stitching along the edges. The slim black powder-coated steel frame stands on sled-style runner legs with a rectangular footrest bar. Materials are listed as STEEL, LEATHER, the finish as BLACK, POWDER COATED, and the size as 20x18x40. It suits a kitchen island, home bar, café or restaurant counter. Catalogue code: H-1274

Coffee Table

Troy round coffee table with a black glass top on a black powder-coated steel wire frame. The round glass top has a dark smoked tone and sits on a thin black rim. Below it, the open wire base forms a ring of pointed, star-like triangles, with rods radiating from a central hub at the bottom and small black caps on the feet. The airy frame keeps the table light in look, suited to a living room or lounge seating area. It is offered as a custom design. Material: STEEL, GLASS. Size: 36x36x17.5. Finish: BLACK POWDER COATED. Catalogue code: TB-1616

Bar Stool

In brown leather, the HUDSON LEATHER BAR STOOL BROWN is a bar stool on a black steel frame. It is made as a custom design. The seat is a rich reddish-brown leather shell with a curved backrest and contrast stitching along its edges. Below it, a slim black powder-coated steel frame runs on sled-style legs joined by a rectangular footrest bar. Materials are listed as STEEL, LEATHER, the finish as BLACK, POWDER COATED, and the size as 20x18x40. It suits a kitchen island, home bar, café or restaurant counter. Catalogue code: H-1273

Side Table

Wheat side table in a gold antique finish, catalogue code H-1190, with a round glass top resting on an iron base shaped like a tied sheaf of wheat. Slim iron blades and sculpted wheat ears fan up beneath the clear glass, then flare out again below a twisted cord-style binding at the waist to form the base. The gold antique finish gives the metal a mottled, aged gold tone. Material is iron and glass. Size is 25X25X20 INCHES. It is made as a custom design, shown as a reference piece of artisan work. Catalogue code: H-1190

Console

EMPIRE CONSOLE TABLE is a gold-plated steel console with a glass top. Its frame is a sculptural hourglass: slim square-section bars run diagonally from the corners of the rectangular base and top frames and cross at the centre in a small diamond. A clear glass panel sits flush inside the top frame, and the metal carries a soft satin sheen. Material is steel and glass, with a GOLD PLATED finish, and the size is listed as 59x16x29.75. It is a custom design, like the rest of the collection. Catalogue code: W-1333

Accent Chair

Brown leather butterfly chair with a black powder-coated steel frame, made as an accent chair for easy lounge seating. The seat and tall winged back are one sling of deep brown leather. Dark laced stitching runs around the edges, with laced seams down the middle of the back and across the seat. A black tubular frame holds the sling in the crossed butterfly shape. It is a custom design, made to show the maker's artisan and manufacturing work. Material: steel and leather. Finish: black, powder coated. Size: 16x29x36. Catalogue code: H-1079

Side Table

Gold plated hammered aluminium stool / side table, catalogue code H-1165G, the gold version of the drum-shaped hammered design. Its rounded body and flat round top with a slight lip are covered in a hammered texture that catches the light in a warm gold tone. It works as a small side table or as a low stool. Material is aluminium with a gold plated finish. Size is 16x16x18. It is made as a custom design, shown as a reference piece of artisan work. Catalogue code: H-1165G

Console

Aura Console is a brass console table with a marble top in a POLISHED BRASS finish. A long rectangular slab of white marble with soft grey veining sits on a slim, mirror-bright brass frame. Each end has straight square-section legs that meet a half-round curved foot, and a long low stretcher links the two ends. Material is brass and marble, and the size is listed as 16x64x30. It is a custom design, like the rest of the collection. Catalogue code: W-1382

Accent Table

Katherine Accent Table, a round brass side table in a polished brass finish, sized 61 cm long, 61 cm wide and 64 cm high. The round top is pale white with a translucent, crystal-like patchwork pattern and a softly rounded edge. It stands on six slender, tapered gold-tone legs joined low down by a cross stretcher, with small dark feet. The piece is a custom design, made to show the maker's artisan and manufacturing work. Material: brass. Finish: polished brass. Catalogue code: CVFNR5080

Side Table

Hammered aluminium stool / side table in a polished silver finish, catalogue code H-1165. The drum-shaped body swells gently at the middle and carries a flat round top with a slight lip, and the whole surface, top included, is covered in an even hammered texture. It works as a small side table or as a low stool. Material is aluminium with a polished finish. Size is 16x16x18. It is made as a custom design, shown as a reference piece of artisan work. Catalogue code: H-1165

Console

Deco Console is a two-tier console table in GOLD PLATED steel with marble shelves. Both the top and the lower shelf are black marble with bold white veining, each set in a gold-plated rectangular frame. The legs form an offset, stepped silhouette: square-section uprights drop past the top edge and turn into open rectangular feet at floor level. Material is steel and marble, and the size is listed as 59.1x15.7x29.9. The lower tier gives a second display surface below the top. It is a custom design, like the rest of the collection. Catalogue code: W-1357

Accent Chair

Navy blue leather butterfly chair on a black powder-coated steel frame, an accent chair for relaxed lounge seating. One sling of navy blue leather forms the seat and the winged back. Its edges are whipstitched with tan lacing, and laced seams run down the back and across the seat. The sling rests on a black tubular frame in the classic crossed butterfly shape. It is a custom design, made to show the maker's artisan and manufacturing work. Material: steel and leather. Finish: black, powder coated. Size: 16x29x36. Catalogue code: H-1002

Coffee Table

Studio Wire Coffee Table with Glass is a round coffee table in black powder-coated steel wire with a clear glass top. The open frame is drum-shaped and widest at the middle, built from stacked steel rings joined by a lattice of triangles and diamonds, so the glass top shows the geometric wirework beneath it. Material is steel and glass, with a BLACK POWDER COATED finish. The size is listed as 36x36x19. It is a custom design, like the rest of the collection. Catalogue code: TB-1639

Bar Stool

The HUDSON LEATHER BAR STOOL BLACK is a bar stool in black leather on a steel frame. It is made as a custom design. The moulded bucket seat has a curved backrest and visible stitching along its edges. It sits on a slim black powder-coated steel frame with sled-style runner legs and a rectangular footrest bar. Materials are listed as STEEL, LEATHER, the finish as BLACK, POWDER COATED, and the size as 20x18x40. It suits a kitchen island, home bar, café or restaurant counter. Catalogue code: H-1272

Accent Chair

White leather butterfly chair in the butterfly sling style, on a black powder-coated steel frame, sold as an accent seat. A low sling of white leather sits on the frame with four raised corner points, its edges whipstitched with white and tan lacing. The black tubular legs cross in an X and loop down to the floor. It is a custom design, made to show the maker's artisan and manufacturing work. Material: steel and leather. Finish: black, powder coated. Size: 16x29x36. Catalogue code: H-1147