All products

Double Charge Tiles

Albaster Crema is a cream-toned double charge tile with a polished finish and marble look, sized 60x60 CM, from the Albaster collection. Soft ivory and warm beige veins sweep diagonally across the face over a lightly speckled ground, and the pattern flows on from tile to tile once laid. The polished face reaches glossiness above 70% (gloss meter 60°). Water absorption is below 0.05% (ISO-10545-3), breaking strength is above 2200 N (ISO-10545-4) and surface abrasion resistance is Class PEI 4 (2100 revolutions, EN 154). The tile has a Mohs scratch hardness of 5 and Class 5 stain resistance, passes frost resistance (ISO-10545-12), and its reaction to fire is Class A1 - A1 fl. The collection also includes Navy, Nero, Pista, Charcol, Red, Ten and White.

WASH BASIN WITH PEDESTAL

The "STATUS" wash basin with pedestal is a wide rectangular bathroom basin with a flat rim and a stepped underside, sized 615x430x840 and offered in White and Ivory. The broad, shallow-profile basin has a flat rim all round, a single tap hole on the back deck and an overflow hole at the back of the bowl. Below the rim, a tiered step adds a layered look before the basin meets a straight rounded-square pedestal that runs to the floor. The finish is glossy. Available colours: White, Ivory.

Body Kit

RS6 front bumper body kit for the Audi A6 C7.5, the bumper-only version of the RS6 front conversion. It gives the A6 the wide honeycomb face of the RS6 in a single assembly. The bumper shell is finished in light grey with a lower splitter moulded in the same colour. A large gloss black honeycomb grille with a number-plate mount fills the centre, flanked by gloss black honeycomb side intakes. The shell carries openings for parking sensors and a tow-hook cover on the side. Fitted to a grey A6, it gives the car the RS6-style front end. Catalogue code: GA0561

Single Row Cylindrical Roller Bearings

KAZI N2211 single row cylindrical roller bearing (N type): 55 mm bore (ID), 100 mm outer diameter (OD), 25 mm width.

Single Thrust Ball Bearings

KAZI 51224 thrust ball bearing: 120 mm bore (ID), 170 mm outer diameter (OD), 39 mm width.

Miniature Ball Bearings

KAZI 601ZZ miniature ball bearing, dimensions 1.5X6X3.

Front Grill

3 Fin glossy black front grill for the Mercedes Benz S Class W221. Three broad horizontal fins sweep across the face, each edged along its top with a bright chrome-finish strip, and a black three-pointed star sits at the centre over a fine black mesh. The glossy black finish covers the whole curved grill shell, with a chrome-finish strip along its lower edge. Fitted to the S Class, the grill closes the front opening between the headlamps and lets air reach the radiator behind it. Catalogue code: GA0161

Lever Handles

SRH-105 is a twisted door lever handle on a round rose in a two-tone finish: a bright chrome-look rose with a slightly darker, satin nickel-tone lever. The lever twists along its length to a flared, squared tip and rises from a ribbed neck on the stepped rose. As a lever on rose, it operates the door latch with a downward press. Catalogue code: SRH-105

Premium Cakes

Lithop Z45 is a fireworks cake in the "Premium Cakes" range, packed in a black box with multicolour burst artwork. A fireworks cake fires a series of aerial shots from one box after a single lighting. The cube-shaped box carries red, purple and orange starburst graphics on a black ground, with the name "LITHOP" in large gold lettering across the front and an orange badge on the front corner. Catalogue code: Z45

Designer Collection - Table Top

Style X-005 table-top wash basin from the Designer Collection, a rounded rectangular bowl in blue-grey and white made to sit on top of a counter. The inside is plain glossy white. The upper part of the outer wall has a mottled blue-grey pattern with a soft floral texture, and the lower part is plain blue-grey circled by fine dark pinstripes.

Taillight

Union Jack clear taillight for the Mini Cooper R56, pairing a clear lens with red Union Jack segments. The central cross of the flag runs in clear white, red triangles fill the spaces between its arms, and a row of small light elements sits in an oval strip at the bottom, all within a black-edged housing with mounting tabs. Lit, the flag pattern glows brightly. On a green Mini hatchback, the lamp sits upright in the rear corner. As a rear lamp, it keeps the Mini visible from behind and signals braking. It is sold as an imported part. Catalogue code: GA0805

Manifolds

A set of 3 machined manifold blocks: one large block with an angled chamfered face and two small cube blocks, one brass-coloured and one silver. The large block has a recessed rectangular pocket with ports, a counterbored threaded port on top and a pattern of drilled and threaded holes across its faces. The small cubes carry threaded ports and drilled holes on several faces. Designed for pneumatic, hydraulic and other applications, these manifolds are made from Aluminium, Brass and Stainless Steel, typically in hundreds per batch, with each manifold engineered for durability and precision.

Stationery

Model 660A is a long PU leather pencil pouch with a diagonal two-tone front, one section printed with unicorns and flowers and the other in a plain matching shade, on a glossy surface. Colourways include light blue, purple, lilac, mint and navy, each boxed in clear PVC and closing with a smooth zipper along the top. The pouch holds pens, pencils and other stationery.

Plain Series

Plain Series 6042 brings a woven parquet look to a 600 x 600 mm matt porcelain tile for floors and walls in homes and commercial spaces. Diagonal wood-look planks in light oak and terracotta tones overlap one another, linked by a white band with black square accents, inside a pale wood-look border. Laid together, the tiles create an interlocking basket-weave floor pattern. Each tile is about 9 mm thick. A box holds 4 tiles and covers 1.44 sq. mtr. Catalogue code: 6042

Ambient Light

14 Pcs white universal ambient light kit for all car types, a set of separate lighting parts for adding accent light around a car interior. The set includes a control box with a four-way splitter harness, round puck lights, black inline modules with plug-in leads and bare wire ends, polished cylindrical light heads, cables ending in red-backed adhesive pads, and a coil of clear, flexible light strand. The parts end in black plug-in connectors, and a light strand like this is typically routed along trim lines to spread the glow across the cabin. Catalogue code: GA0449

Special Universal Connectors

Combination switch-I connector for the Mahindra Scorpio, 9 pole female, wired with 4mm deluxe wire 9 inches long. It connects the wiring harness to the Scorpio combination switch and offers a ready-wired pigtail for replacing a worn or broken plug. The housing is bright green, with a ribbed top, a centre latch and two rows of cavities across the face, and multicoloured wire leads run from the back. It is packed 10 pcs. Catalogue code: SH2101091

Brass Lever on Rose

BLR-05 door lever handle on a square rose, from the "Brass Lever on Rose" range, with a wide flat lever in a brushed antique brass-look finish. The lever rises from the square backplate in a smooth curved neck and runs out into a broad, flat-faced grip with squared ends. Two small fixing holes sit on the edge of the rose. A lever on rose mounts on the face of a door and works the latch when the lever is pressed down. Catalogue code: BLR-05

Parking Tiles - Punch Series

Citrine 008 is a terracotta-tone heavy duty parking tile in the Punch Collection, sized 600 x 600 mm with a 12 mm thickness, for residential, commercial, industrial and outdoor use. Warm terracotta-brown blocks make up each tile, four to a face, separated by dark joint lines. One block on every tile carries a cream patterned motif, such as a flower, star or scroll design, and its position shifts between tiles, so a laid floor shows motif squares scattered across plain terracotta. The series is made for durability and style. The tile is scratch, stain, chemical, fire, water, frost and germ resistant, with all-weather resistance, dimensional stability, low maintenance, easy installation and design flexibility.

Glossy Series

Glossy Series 11170 wall tile, 450 x 300 mm, combines an off-white linen-texture tile, a green leafy tree highlight and a matching green linen-texture tile. 11170-L has a soft off-white surface with a fine woven, fabric-like texture. 11170-HL shows slender brown stems topped with round clusters of green leaves, with teal and tan leaves along the stems on a light textured background. 11170-D brings the same woven texture in a mid green that picks up the leaf colour of the highlight. The tiles are sold as 100% water proof tiles, with a matching floor tile available in 300 x 300 mm. Catalogue code: 11170-L, 11170-HL, 11170-D

SS kitchenware

Stainless steel saucepan in 22G and 18G gauge, size 10*14, with a mirror polish finish and a lifetime guarantee. It is made for tea, coffee, soup, sauces, boiling milk or water, instant noodles and reheating food, on induction cooking and gas stoves alike. The saucepan has a deep round bowl with a rolled rim and a long twin-wire steel handle with black heat-resistant sleeves and a hanging loop, fixed to the body by a riveted bracket. It has a SAS bottom, food-safe AISI 202 grade stainless steel on the inside and an AISI 430 grade magnetic stainless steel base for induction use. It is easy to clean and weighs 2.750 kg. The saucepans are made in graduated sizes that stack together.

Single Row Cylindrical Roller Bearings

KAZI NUP320 single row cylindrical roller bearing (NUP type): 100 mm bore (ID), 215 mm outer diameter (OD), 47 mm width.

Double Charge Series

Light beige porcelain tile, design 5017 from the Double Charge Series, sized 600 x 600 mm in a matt finish for floors and walls in residential and commercial spaces. The surface carries a fine, even speckle of cream and white grains over a soft beige base. Laid together, the tiles form a uniform speckled field with thin, light joints, so the pattern reads as one continuous surface across a large area. Each tile is approx. 9 mm thick, and a box holds 4 tiles covering 1.44 sq. mtr. Catalogue code: 5017

Chemical Containers

A 20 litre narrow mouth chemical container in black, a jerrycan-style plastic can for storing and carrying liquid chemicals. Its upright rectangular body has a recessed panel moulded into the front face, and a narrow neck with a cap sits at one top corner for controlled pouring. The Chemical Containers range comes in three grades. XLPE suits the most aggressive chemicals, such as strong acids, alkalis and oxidizers; it is made by a patented process, designed for a very wide service temperature range, impact resilient and offers the highest corrosion protection. HDPE suits normal acids and general chemicals, and MDPE, made from standard PE, suits mild chemicals and food contact applications. All three are seamless; XLPE and HDPE are maintenance free with long life, and MDPE has moderate life.

Aluminium Non Stick Kadai

Aluminium non-stick kadai, also called a deep karahi or triply kadhai, 4 mm thick with 3ltr capacity, an induction base and a round bottom. It suits gas, induction, ceramic, electric and halogen cooktops for boiling vegetables, cooking sauces, steam frying or sautéing, and goes from stove to table. Made of Hindalco Aluminium with a 3-layered non-stick coating, it is PFOA free, ISI marked, stain and corrosion resistant and easy to clean, and heats fast and evenly to save fuel and time. The glossy red body has thin silver bands and two short black easy-grip handles. It comes with a tempered glass lid and a steel lid, which may vary with availability, and a 1 Year warranty against manufacturing defects (T&C apply).

Glazed Porcelain Tiles

Sandy beige and finely speckled, Town Sand is a 60x120 CM glazed porcelain tile with a concrete look and a structured matt finish (Matt with structure). Small taupe and pale flecks scatter evenly over a soft, slightly clouded beige base, part of the Town collection. Breaking strength is > 1800 N (ISO-10545-4), slip resistance > 0.40 dry, > 0.40 wet (ISO-10545-17) and stain resistance Class 5 (ISO-10545-14). Other colours in the Town collection are Crema, Pearl, Smoke, Silver and Nero. Available sizes (CM): 100x100, 120x180, 60x60, 60x120, 30x60, 80x80, 80x160, 120x120