All products

Premium Caps

Orange knitted cap with two pom-pom ties, an embroidered cartoon motif and a striped turn-up cuff. A cord at each top corner ends in a pom-pom, one lilac and one orange, and a black knot sits at the centre of the top. The front carries an embroidered cartoon figure in yellow beside a small animal, under a thin lilac and black stripe. The folded cuff is banded in yellow, dark brown and lilac stripes on orange.

Designer Collection - Flushing System

The "Dual Flush Superflow" is a flushing-system set of loose parts from the Designer Collection. Its main piece is a tall white cylindrical valve with an open slotted upper cage and a round black-and-chrome push button on top, standing on a base fitted with a dark seal ring. Alongside it come a white and translucent valve with a small cup on an angled arm, set on a clear plastic base, and two brass bolts fitted with black washers.

Wooden Tiles

Eden Blue is the blue-grey shade of the Eden Wooden Tiles collection: a 20x120 CM wood-look plank in a Carvin finish. Its face shows a weathered, whitewashed wood grain in cool blue-grey, with knots, scraped lines and pale streaks, and laid planks shift in tone from board to board. Key figures include water absorption < 0.05% (ISO-10545-3), surface scratch hardness 5 on the Mohs scale (EN 101) and stain resistance Class 5 (ISO-10545-14). Other Eden colours: Eden Grey, Eden Orange Peach, Eden Tea Green, Eden Turquiise, Eden Green, Eden Dusty Peach, Eden Cloud Grey, Eden Brown, Eden Black, Eden Apple Green

Tapered Roller Bearings

KAZI 32222 tapered roller bearing: 110 mm bore (ID), 200 mm outer diameter (OD), 56 mm width.

TABLE TOP HANDMADE ART BASIN

The BLOOM 09 is a handmade table top art basin in solid glossy black, rectangular at 490 X 370 X 130 MM, for countertop mounting. Black runs through the inside bowl and the outer walls alike, giving a single-colour look with a high-gloss surface. The basin has straight sides, rounded corners, a flat rim and a tap hole on the rear deck for a single deck-mounted tap.

Architectural Surfaces

Warm brown-taupe tones set Emperador Brown apart: a 30x120 CM architectural surface with a marble look and Carvin finish, from the Emperador collection. Its face shows a dense mosaic of rounded stone-like fragments in brown and grey, threaded with fine white veins and an orange-gold vein running across the length. The Emperador design also comes in Emperador Black, Emperador Grey and Emperador Bianco, all in 30x120 CM.

DRL

Honda WRV 2017 LED DRL, a pair of rounded black bezels with an angular C-shaped light strip around the lamp opening, lighting white as day running lights or amber. Daytime running lights make the car easier for other road users to see in daylight. The pair connects through a wiring harness with a black control box. Catalogue code: GA0062

Comets

"Red Coral" is a comet firework from Sivakasi, Tamil Nadu, sold in the "Comets" range. Its two tall packs, a square-section box and a round tube, are finished in yellow and orange with red accents, a circular burst pattern near the top and the "RED CORAL" name printed in red down the side. Catalogue code: 561 & 888

2021 Matt 60x60cm

Forest Wood Mist is a 600 x 600 mm matt GVT (glazed vitrified tile) in a pale honey-beige wood design with soft grain lines and a light knot. It sits in the "Polished Glazed Vitrified Tiles" range. The tile is germ resistant, sun and UV resistant, frost resistant and easy to clean, with a flexible body and high resistance to breaking. Each box holds 4 pieces covering 1.44 sqm and weighs approx. 28.5 Kgs. The tile thickness is approx. 9.

Single Thrust Ball Bearings

KAZI 51413 thrust ball bearing: 65 mm bore (ID), 140 mm outer diameter (OD), 56 mm width.

Electrical Components

4 pin 12V relay with fuse for 2 & 4 wheelers, suited to motorcycles, scooters, cars and SUVs. It lets a small switch current control a heavier circuit, with a plug-in fuse built into the body to protect that circuit. The black housing has four flat blade terminals inside a shrouded socket, a yellow blade fuse marked 20 seated in a slot below it, and two heavy screw terminals with black caps. Catalogue code: S2WR41211

Boxes and Packaging

Handmade gift box with compartments, designed for organized and elegant gifting. A hinged lid opens to a purple interior divided into two main compartments and a narrow side section, so several small items can sit neatly apart. The lid is lined in textured purple paper, and the outer edges are covered in cream paper with fine coloured stripes. It comes from a paper goods range crafted to serve practical and decorative needs, offering uniformity, personalisation and aesthetic appeal for business gifting.

Miniature Ball Bearings

KAZI MR84 miniature ball bearing, dimensions 4X8X2; NMB number L-840.

Brochure Products

Stock Pot With Rim (AME-012) is a wide, deep clay stock pot for simmering stocks, soups, dals and curries. A thick, flat rim runs around the open mouth, and the sides curve down to a narrower base, with faint ridges circling the upper body and a smooth red-brown terracotta finish. Cooking in clay retains natural nutrition in the food, reduces oil consumption and adds nutrients such as calcium, phosphorus, iron and magnesium, helping to stay fit and healthy. Catalogue code: AME-012

Designer Collection - Table Top

Coral X-010 table-top wash basin from the Designer Collection, an oval bowl made to sit on top of a counter. The inside of the bowl is a glossy solid black, while the outer wall is white covered in black splatter and fine streaked lines, giving a bold black-and-white abstract look. The bowl has a smooth, thin rim and a deep, rounded shape that curves in toward the base.

CY Mortice Locks

Kodia CY 110 Korindo Big mortice lock body, 45X85, a 10 Inch lock with four S.Steel bullet bolts for euro profile cylinder doors. The four round bullets act as the deadbolt, thrown by the euro cylinder, while a lever handle on the square follower works the spring latch. The case is black, with a long satin silver-finish faceplate carrying the Kodia mark and screw holes along its length. It has a brass-lined square follower, a spring-loaded latch, the four polished round bullets set one above the other, and a euro profile cylinder cut-out. Catalogue code: CY 110

Brochure Products

Clay deep fry pan / tawa in a kadai shape, with two tall handles that curve upward from the rim. The bowl is deep and rounded, with a rolled rim, in a reddish-orange terracotta colour with a matte finish. It is used for deep frying and stove-top cooking. The seller says its claypot cookware retains natural nutrition in the food, reduces oil consumption, adds nutrients (calcium, phosphorus, iron and magnesium) and helps to stay fit and healthy. Catalogue code: AME-025

Battery Accessories

Heavy-duty jumper cable set, 4 Meter (4000mm) long, for emergency jump starts and battery boost. Jumper cables carry current from a charged battery to a flat one so a stalled vehicle can be started again. The set has a red lead and a black lead, each ending in a bolt-tightened battery terminal clamp, with the red clamp marked +. Packed as 1 set.

Designer Collection - Wash Basin Pedestal

Sterling Set - 505 is a black-and-grey designer wash basin pedestal set from the "Designer Collection", with a speckled textured pattern and a broad white diagonal band. The rounded basin has a raised, scalloped rim with moulded detailing and a black bowl. A white band runs diagonally from the basin front down around the pedestal column, dotted with small dark dot clusters. Round scroll ornaments sit on either side of the column, which ends in a flared, stepped base.

Seed Processing Machinery

Copra cutter, model TP-CC, that cuts dried copra balls into small pieces ready for crushing in a coconut oil expeller, at a cutting capacity of 300 Kg / Hour. Copra is the dried kernel of the coconut: it is well dried and cleaned of unwanted particles, then cut in this machine and fed into the expeller to extract copra oil. The cutter is made and exported as part of a coconut oil mill project. The TP-CC runs on a 4 HP Motor, weighs 200 Kg, measures 60(L) x 20(W) x 50(H) inches and takes 0.60 cubic metre. The cutter comes in two versions, motor driven and expeller shaft driven. The expeller-shaft-driven version suits budget buyers and needs more labour, since each copra is fed and pushed by a lever by hand. The teal machine has a funnel hopper on top, a large spoked pulley and a belt-driven motor on a shared base.

Conversion Kit

Turn Heads with the Ultimate M5 CS Upgrade Give your BMW F10 the aggressive, performance-inspired look of the F90 M5 CS with Glenn Automotive’s precision-crafted conversion kit. Designed for enthusiasts who want top-tier aesthetics without compromising fitment, this kit delivers an OEM-style transformation that makes your F10 stand out on any road. ✅ What’s Included: - F90-style Front Bumper with M5 CS detailing - Aggressive Rear Diffuser - Sculpted Side Skirts - Performance-style Rear Spoiler (optional) - All required brackets and fittings 🚗 Key Features: - Perfect Fitment for BMW F10 5 Series - Made from high-grade ABS / PP material - Direct bolt-on installation – no cutting or welding - Supports painting to match your car’s color - Compatible with 520d, 525d, 530d, and M Sport variants 🌎 Who Is It For? BMW owners across India who want: - An affordable way to replicate the F90 M5 CS look - A complete aesthetic makeover for their F10 - Showroom-quality fit and finish 🛠 Installation Options: - Expert fitment service available in Surat (at Glenn Automotive Workshop) - Support for professional painters and garages nationwide 📦 Shipping & Availability: - PAN India shipping in 4–6 days - Carefully packaged to avoid damage in transit - Ready stock available | Cash on delivery in select cities 🔑 Why Glenn Automotive? - 1000+ premium car customizations delivered - Trusted by BMW, Audi, Mercedes enthusiasts - Real-time customer support & fitment guidance Upgrade your BMW F10 today and experience the bold, commanding presence of the M5 CS. 🔧 Order now. 🔥 Limited stock. Fitment in Surat available.

Brass Mortice Handles

ABH-1410-C brass mortice handle, a 350mm lever handle on a long plate that works a mortice lock from the door face, with a profile-cylinder cutout below the lever. The plate has a muted, brushed gold-tone finish, ornate filigree end caps with a screw hole at each end, and an oval medallion with a dark relief pattern set between the lever and the cutout. The lever sweeps out from a round boss and carries a carved, wing-like scroll along its underside. Catalogue code: 3614

Kitchen Series

Wall tile 41007 from the "Kitchen Series", 450 x 300 mm, sold as 100% water proof tiles. The set carries nine design codes, running from 41007-L through 41007-HL-1 to 41007-HL-8. Every design shares a bevelled brick pattern in a white marble look with soft grey veining. The plain tile keeps that marble brick face. The decorated designs add splash-style fruit such as lemon, orange, apple, banana, strawberry, cherries, figs, kiwi, grapes, pineapple and blueberries, with line-drawn leaf sprigs between them. Other designs switch to black-and-white motifs: coffee beans, cups, teapots, cutlery, cupcakes and leaf-pattern panels, with a few in warm colour. Catalogue code: 41007, 41007-L, 41007-HL-1, 41007-HL-2, 41007-HL-3, 41007-HL-4, 41007-HL-5, 41007-HL-6, 41007-HL-7, 41007-HL-8

2021 PGVT 60x60cm

Woven Y-shaped bands in navy, pale blue, grey, charcoal, brown and peach run over a cream floral background on 3D 8059, a 600 x 600 mm PGVT (polished glazed vitrified) tile from the 3D Series, shaded to give an interlocking three-dimensional effect. It belongs to the 2021 PGVT collection. The seller lists germ resistance, a flexible body, sun / UV resistance, easy cleaning, high resistance to breaking and frost resistance. Each box holds 4 pcs, covers 1.44 sqm and weighs approx. 28.5 Kgs; the approximate tile thickness is listed as 9. Catalogue code: 3D 8059

60x120cm PGVT

Teltos Brwon PGVT tile in a warm tan-brown, sized 600 x 1200 mm with a glossy finish, a polished glazed vitrified tile. Thin white and darker brown veins cut diagonally across the caramel-toned ground for a stone look. Teltos Brwon comes in 4 faces, so the veining differs from tile to tile. Each box holds 2 pieces, covers 1.44 sqm and weighs approximately 32 Kgs. Tile thickness (approx.): 9.