Arme Locks

Manufacturer, ExporterAligarh, Uttar Pradesh

Business type

Manufacturer, Exporter

Based in

Aligarh Uttar Pradesh

Catalogue

138 products in 6 categories

Shop by category

All products →

Brass Mortice Handles40 products

SS Mortice Handles19 products

Iron Mortice Handles21 products

Mortice Locks19 products

Door Locks17 products

Mortice Cylinders22 products

Their products

138 items across 6 categories

Brass Mortice Handles40 SS Mortice Handles19 Iron Mortice Handles21 Mortice Locks19 Door Locks17 Mortice Cylinders22

Brass Mortice Handles40 products

ABH-1071

Brass mortice handle ABH-1071 brings a straight, angular lever to a long rectangular backplate, made to pair with a mortice lock on a door. The size is listed as 250mm. The square-section lever is finished in brushed silver tone with thin gold-tone inlay lines along its length, set on a square gold-tone base. The plate is brushed silver tone with polished gold-tone side edges. A keyhole-shaped cutout for a lock cylinder sits in the lower half, and four screw holes, two at each end, fix the plate to the door. Catalogue code: 3628

ABH-1409

Brass mortice handle ABH-1409 comes in the 350mm size from the Regular Range, as a lever set for mortice lock doors. The plate ends in shaped, pierced scrollwork at top and bottom, with raised palmette and scroll motifs standing out from a dark, hammered-look ground in an antique brass finish. The lever has a textured face and ends in a heart-shaped scroll tip with a small palmette. A profile-cylinder keyhole sits below the central motif, with screw holes near each end. Catalogue code: 37434

ABH-703

ABH-703 brass mortice handle in 175mm, a two-tone lever handle on a plate with arched, shaped ends and a keyhole for a mortice lock. A polished gold-tone border frames a brushed silver-tone centre panel, with a screw hole near the top and bottom. The slim, curving lever rises from a gold-tone rose and shifts from silver-tone at its base to gold-tone along the arm. Catalogue code: 3605

ABH 1090

ABH 1090 is a two-tone brass mortice handle from the Regular Range: a lever handle on a long backplate for doors fitted with a mortice lock. The plate pairs a brushed gold-tone face with black textured inlay in a flowing wave pattern, and it ends in shaped tips at top and bottom, each with a screw hole. Below the lever sits a profile-cylinder keyhole cut-out. The curved lever widens to a rounded end and carries black engraved scrollwork around an oval motif, with a small star emblem at its base. Catalogue code: 37498

ABH-1410-C

ABH-1410-C brass mortice handle, a 350mm lever handle on a long plate that works a mortice lock from the door face, with a profile-cylinder cutout below the lever. The plate has a muted, brushed gold-tone finish, ornate filigree end caps with a screw hole at each end, and an oval medallion with a dark relief pattern set between the lever and the cutout. The lever sweeps out from a round boss and carries a carved, wing-like scroll along its underside. Catalogue code: 3614

ABH-832

ABH-832 brass mortice handle in 200mm, a two-tone lever handle on a plate with a profile-cylinder cutout for a cylinder mortice lock. The plate has scalloped ends and a polished gold-tone border around a brushed silver-tone centre panel, with a screw hole near the top and bottom. The curved lever, silver-tone at the base and gold-tone along the arm, rises from a gold-tone rose. Catalogue code: 3612

ABP-03

ABP-03 is a brass mortice door handle from the "Premium Range" with a raised shield emblem, made in 125mm, 250mm and 350mm sizes. As a mortice handle set, it mounts on a door over a mortice lock and works the latch. A dark brown frame surrounds a hammered gold-tone face, and the plate tapers to pointed ends. A polished shield with a key-pattern border sits above a dark lever, which has a patterned gold-tone collar and end cap. A euro-profile cylinder cut-out sits low on the long plate. The design also comes as a shield-shaped short lever plate and a matching shield-shaped cylinder plate. Catalogue code: 37427

ABH-1298

Peacock-pattern brass mortice handle ABH-1298 is the 250mm size in the Regular Range, for doors with a mortice lock. The rectangular plate carries a raised peacock with a long feathered tail and flowers below it, set on a dark textured ground inside an antique brass border. The curved lever repeats the peacock-feather pattern along its length. A profile-cylinder keyhole is set within the tail, and screw holes sit in each corner. Catalogue code: 3616

ABH-1251

Plain-faced brass mortice handle ABH-1251 comes in a 300mm size from the Regular Range, as a lever set for mortice lock doors. Its rectangular plate has a stepped edge that flares slightly at the top and bottom, in a brushed antique brass finish. The straight lever is fluted along its length and turns on a round boss with a rosette cap. A profile-cylinder keyhole sits low on the plate, and two screw holes at each end fix it to the door. Catalogue code: 3617

ABH-714

ABH-714 is a two-tone 175mm brass mortice door handle from the Regular Range, a lever handle on a keyhole plate for doors fitted with a mortice lock. Turning the lever draws back the lock's latch, and the keyhole below gives the key access to the lock. The backplate has a polished gold-tone frame with shaped, cut-in ends around a brushed silver-tone centre panel set with two gold-tone curl motifs. The gold-tone lever carries a silver-tone inlay along its top and ends in a rounded knob. One screw hole at the top and one at the bottom fix the plate to the door. Catalogue code: 3604

ABH-1139

ABH-1139 is a 275mm brass mortice handle from the Regular Range, covered in a dense grid of small four-petal flowers on a darkened antique ground. It is a lever handle on a long backplate for doors fitted with a mortice lock. The rectangular plate has rounded ends and stepped edges, with flowing scroll motifs at top and bottom and two screw holes at each end. A profile-cylinder keyhole cut-out sits below the lever. The flat lever carries a matching inset panel of the same flower grid flanked by scrolls. Catalogue code: 37068

ABH-1411

ABH-1411 brass mortice handle, 350mm size, Regular Range, with a richly cast backplate covered in scrollwork and leaf motifs. It mounts on a door over a mortice lock, with the lever working the latch. The tapered, fluted lever ends in a domed tip and turns from a decorative round rose framed by more scrolls. Below it, a narrow central panel with finely beaded edges carries a cylinder-shaped keyhole cutout. The whole piece has an antique-brass-tone finish, and screw holes sit within the ornamented top and bottom ends. Catalogue code: 37104

ABP-05

ABP-05 is a brass mortice door handle from the "Premium Range", with an arched, pointed top and a scroll lever, available in 200mm and 250mm. It goes on a door over a mortice lock, the ordinary role of a mortice handle set. The satin gold-tone backplate has dark edges and engraved lines that run down from the arched top to a cluster of dot motifs at the base. The curved lever opens with a scroll at the rose and carries dark leaf-like grooves toward its tip. A euro-profile cylinder cut-out sits below the lever, with screw holes at the top and bottom of the plate. Catalogue code: 37431

ABP-02

ABP-02 is a brass mortice door handle in the "Premium Range" with a curved backplate and heart motif, offered in 125mm, 250mm and 350mm. It fits a door over a mortice lock, the ordinary job of a mortice handle set, with a lever to work the latch. The brushed gold-tone backplate has a thin copper-red edge line, a brick-pattern crest with a shield emblem at the top and an engraved heart at the bottom. The lever repeats the brick-pattern collar and ends in a heart-shaped tip. A euro-profile cylinder cut-out sits below the lever. The design also comes as a short lever plate and a short cylinder plate with dark edges and the same heart engraving. Catalogue code: 37428

ABH-862

ABH-862 is a 200mm brass mortice door handle from the Regular Range in an all silver-tone finish, with a straight, squared lever on a keyhole plate for doors fitted with a mortice lock. The lever turns to draw back the lock's latch, and the keyhole in the lower plate lets the key reach the lock. The rectangular backplate has a brushed silver-tone face with a stepped rim. The square-section lever is brushed to match and carries fine grooved lines along its sides, rising from a square base. Four screw holes, two at each end, secure the plate to the door. Catalogue code: 3610

ABP-04

ABP-04 is an ornate brass mortice door handle in the "Premium Range", covered in filigree scrollwork and sold in two sizes, 125mm and 300mm. It mounts on a door over a mortice lock, the ordinary use of a mortice handle set. The long plate is bronze-brown with gold-tone filigree crests at both ends, an engraved lever with a filigree collar, and a euro-profile cylinder cut-out. The short lever plate and the matching short cylinder plate come in gold-tone with dark engraved scrolls and florals. Their teardrop lever is engraved with flowers and vines along its length. Catalogue code: 37429

ABH-861

ABH-861 is a 200mm two-tone brass mortice door handle from the Regular Range, with a squared, angular lever on a keyhole plate for doors fitted with a mortice lock. Turning the lever draws back the lock's latch, and the keyhole below gives the key access to the lock. The rectangular backplate pairs a brushed silver-tone face with polished gold-tone edges. The straight, square-section lever, brushed silver-tone with gold-tone edging and a gently waved underside, sits on a square rose. Four screw holes, two at each end, fix the plate to the door. Catalogue code: 3611

ABH-1081

Brass mortice handle ABH-1081 pairs a curved gold-tone lever with a ribbed two-tone grip, mounted on a long backplate for use with a mortice lock on a door. The size is listed as 250mm. The grip is brushed silver tone, banded with raised gold-tone rings and finished with a rounded gold-tone end. The backplate has angled corners and a brushed silver-tone centre panel framed by a polished gold-tone rim with a dotted bead edge. A keyhole-shaped cutout for a lock cylinder sits in the lower half, with one screw hole at the top and one at the bottom. Catalogue code: 3631

ABH-705

Oval-plate ABH-705 brass mortice handle in 175mm, a two-tone lever handle with a keyhole for working a mortice lock. The elongated oval plate has a polished gold-tone rim around a brushed silver-tone inner panel, with a screw hole at each end. The curved lever ends in a rounded tip, silver-tone at the neck and gold-tone along the arm, set on a gold-tone rose. Catalogue code: 3606

ABH-1409C

The ABH-1409C is a decorative brass mortice handle in a 350mm size, a lever handle on a long carved-look backplate for fitting with a mortice lock on a door. Its antique bronze-tone plate has a textured background with raised scrollwork, fan and leaf motifs, and openwork scrolls at the top and bottom ends. The curved lever carries a matching fan motif and ends in scrolled tips. A euro-profile cylinder keyhole cut-out sits below the lever, with screw holes near each end of the plate. Catalogue code: 37060

Showing 20 of 40 in Brass Mortice Handles

Show 20 more

SS Mortice Handles19 products

ASH-821

ASH-821 is an SS mortice handle with a round tubular lever, size 200mm, from the Regular Range of mortice handles. It operates the latch of a mortice lock on a door. The long rectangular backplate has a raised bevelled edge, four screw holes (two at each end) and a profile cylinder cut-out below the lever. The lever rises from a round rose, and the plate and lever share an antique-tone brushed finish in a dark gold shade. Catalogue code: 37213

ASH-833

ASH-833 is a 200mm SS mortice handle with a straight round-bar lever and a traditional keyhole, part of the Regular Range, for working the latch of a mortice lock on a door. The tubular lever runs straight out from a round rose and finishes in a bright polished end cap, with a matching bright ring at the rose. The long backplate carries a brushed satin finish, a raised edge border and four screw holes, two at each end. The keyhole below the lever takes a lock key. Catalogue code: 37207

ASH-832

ASH-832 is a 200mm SS mortice handle with a curved lever on a long backplate, from the Regular Range, for operating the latch of a mortice lock on a door. The lever sweeps outward in a gentle curve from a round rose, with bright polished faces set against the brushed satin finish of the plate. The backplate has a stepped, raised border and four screw holes, two at each end. A cylinder-profile cut-out below the lever takes a mortice cylinder. Catalogue code: 37208

ASR-53

ASR-53 is an SS rose handle whose square-section lever is cranked, with an angled bend just above the rose, for working the latch of a mortice lock. It belongs to the SS Mortice Handles rose range. The bent lever rises from a square neck and then runs straight, set on a rounded-square rose. The whole handle carries a brushed satin steel finish, with a small grub screw hole on the side of the rose. Catalogue code: 37328 Part numbers: ASR-53

ASH-P01

ASH-P01 is an SS mortice door handle from the "Premium Range" with a thick, square-cut block lever in a brushed satin steel finish, used to work the latch of a mortice lock. It is offered in 125mm, 200mm and 250mm sizes. The chunky box-section lever sits on a slim rectangular backplate with crisp straight edges. It comes on a plate with a standard lever keyhole and four screw holes, on a plate with a cylinder (euro-profile) cutout and a clean, screw-free face, and on a shorter plate with a plain face. Catalogue code: 37305

ASH-801

ASH-801 is a 200mm SS mortice door handle from the "Regular Range", pairing a round tubular lever with a long backplate cut for a cylinder (euro-profile) lock. It works the latch of a mortice lock. The handle has a two-tone look: a bright polished plate with a stepped edge, and a satin-finish lever with polished ring grooves near its tip and a polished band along its length. The lever curves down into a rounded rose on the plate, which fixes with four screws. Catalogue code: 37211

ASR-54

ASR-54 is an SS rose handle with a round-bar lever, from the SS Mortice Handles rose range, used to turn the latch of a mortice lock. A straight tubular lever with rounded ends sits on a cylindrical neck marked by fine grooved rings, mounted on a rounded-square rose. Lever and rose have a brushed satin steel finish, and a small grub screw on the edge of the rose holds the handle in place. Catalogue code: 37329 Part numbers: ASR-54

ASH-822

ASH-822 is an SS mortice handle with a straight square-section lever, size 200mm, from the Regular Range of mortice handles. It operates the latch of a mortice lock on a door. A satin silver-tone backplate with a stepped edge carries a brighter lever on a square rose, with a profile cylinder cut-out below and four screw holes, two at each end. Catalogue code: 37212

ASH-823

ASH-823 is an SS mortice handle offered in three sizes, 125mm, 175mm and 200mm, from the Regular Range of mortice handles. It operates the latch of a mortice lock on a door. Its flat lever curves gently downward from a square rose. The long rectangular backplate has four screw holes, two at each end, and a profile cylinder cut-out below the lever, all in an antique-tone brushed finish in a dark gold shade. Catalogue code: 37215

ASH-020

ASH-020 is an SS mortice door handle from the "Premium Range", with a solid flat rectangular lever on a long rectangular backplate, used to work the latch of a mortice lock. It comes in 125mm, 200mm and 250mm sizes. The lever is a plain block with softly rounded corners, set on a square-edged plate fixed with four screws. It is offered on a plate with a standard lever keyhole, on a plate with a cylinder (euro-profile) cutout, and on a shorter plate with a plain face. Finishes include bright polished silver and a brushed antique-brass tone. Catalogue code: 37312

ASR-52

ASR-52 is an SS rose handle with a straight square-section lever, part of the SS Mortice Handles range, for operating a mortice lock's latch. The flat-sided lever runs straight out from a square neck set on a rounded-square rose. Lever and rose share a brushed satin steel finish, and a small grub screw hole sits on the edge of the rose for fixing. Catalogue code: 37324 Part numbers: ASR-52

ASH-824

ASH-824 is a mirror-bright SS mortice handle with a square-section lever, size 200mm, from the Regular Range of mortice handles. It operates the latch of a mortice lock on a door. The highly polished silver-tone backplate is framed by a darker satin rim, and the lever angles out from a block-shaped rose. A profile cylinder cut-out sits below the lever, with four screw holes, two at each end. Catalogue code: 37209

ASH-851

ASH-851 is a 200mm SS mortice handle whose round lever rises from the plate on an angled, sloping neck, from the Regular Range, for operating a mortice lock on a door. The lever and neck form one smooth tubular piece in brushed satin, matching the flat backplate with its bevelled edges. Four screw holes, two at each end, fix the plate to the door, and a slim keyhole sits below the lever. Catalogue code: 37205

ASH-852

ASH-852 is a 200mm SS mortice handle with a square-section lever on a square neck, part of the Regular Range, for working a mortice lock on a door. The lever has crisp, straight edges and runs out at a right angle from its block-shaped neck, all in a brushed satin finish that matches the flat backplate. The plate has bevelled edges and four screw holes, two at each end, with a keyhole below the lever. Catalogue code: 37204

ASH-854

ASH-854 is a 200mm SS mortice handle on a long backplate, from the Regular Range, for doors fitted with a mortice lock. The lever turns to work the lock's latch, and the keyhole cut-out in the plate takes the lock's key. The handle has a brushed satin steel finish. A straight round-bar lever rises from a round collar near the top of a long rectangular plate, and the plate fixes to the door through four countersunk screw holes, two at each end. Catalogue code: 37122 Part numbers: ASH-854

ASH-831

ASH-831 is an SS mortice handle with a keyhole cut-out and an angled flat lever, size 200mm, from the Regular Range of mortice handles. It operates the latch of a mortice lock on a door. A bright flat lever bends out from a round satin rose on a satin silver-tone backplate with a stepped edge. The traditional keyhole sits below the lever, with four screw holes, two at each end. Catalogue code: 37210

ASH-021

ASH-021 is an SS mortice door handle from the "Premium Range" whose flat lever carries a long open rectangular window, mounted on a rectangular backplate to work the latch of a mortice lock. Sizes are 125mm, 200mm and 250mm. The open-frame lever gives a light, modern look against the square-edged plate, which fixes with four screws. It is offered on a plate with a standard lever keyhole, on a plate with a cylinder (euro-profile) cutout, and on a shorter plate with a plain face. Finishes include bright polished silver, a brushed antique-brass tone and brushed satin silver. Catalogue code: 37322

ASH-022

ASH-022 is an SS mortice door handle from the "Premium Range" with a flat lever pierced by two square cut-outs side by side, set on a rectangular backplate to work the latch of a mortice lock. It comes in 125mm, 200mm and 250mm sizes. The handle has a bright polished silver finish throughout, with a square-edged plate fixed by four screws. It is offered on a plate with a standard lever keyhole, on a plate with a cylinder (euro-profile) cutout, and on a shorter plate with a plain face. Catalogue code: 37323

ASH-853

ASH-853 is a 200mm SS mortice handle with a faceted lever and chamfered edges, from the Regular Range, for operating a mortice lock on a door. The lever has a multi-sided profile with bevelled corners, and its angled neck carries bright polished facets that contrast with the brushed satin of the lever and backplate. The flat plate has bevelled edges and four screw holes, two at each end, with a keyhole below the lever. Catalogue code: 37203

Iron Mortice Handles21 products

AIH-04

AIH-04 is a 175mm iron mortice handle with a curved lever and a cylinder-profile keyhole, from the Regular Range for fitting on a door over a mortice lock. The rectangular backplate has bevelled edges and a sweeping curved panel running its full length, set off by three short horizontal grooves beside the lever. The lever arcs outward from a round collar and turns the lock's latch, while the keyhole cut-out suits a cylinder lock. Two screw holes at each end fix the plate to the door. The whole piece carries a brushed, bronze-toned finish. Catalogue code: 37154

AIH-119

AIH-119 iron mortice handle with a straight, flat-bar lever that curls into a rounded neck, from the Regular Range in 125mm and 200mm sizes. A mortice handle fits on the door face over a mortice lock set into the door and works its latch. It comes in two brushed finishes, a satin silver tone and an antique-brass-look tone. The long backplate carries a euro-profile cylinder cut-out below the lever, the shorter backplate has a plain face, and a square rose version pairs with a matching square escutcheon cut for a euro-profile cylinder. Both backplates have rounded corners and four screw holes. Catalogue code: 37391

AIH-120

AIH-120 two-tone iron mortice handle in black and satin silver, with a slim, flat blade lever on a round boss, from the Regular Range in 125mm and 200mm sizes. A mortice handle fits on the door face over a mortice lock set into the door and works its latch. On the long backplate, curved black sections frame a satin silver centre, with a black round boss and a keyhole below the lever. The shorter backplate is all satin silver with curved line detailing, and the square rose version sets a satin disc and lever on a black square rose, paired with a black square escutcheon cut for a euro-profile cylinder. Both backplates have rounded corners and four screw holes. Catalogue code: 37370

AIH-10

AIH-10 iron mortice handle from the Regular Range: a lever handle on a long backplate for doors fitted with a mortice lock. The plate has rounded ends, a raised polished rim and a traditional keyhole cut-out below the lever, with two screw holes at the top and two at the bottom. A flat, slim lever rises from a round rose, and the whole set carries a brushed silver-tone finish. Pressing the lever turns the lock's latch to open the door. Catalogue code: 37462

AIH-02

AIH-02 is a 175mm iron mortice door handle in an all-over brushed satin-nickel tone, from the "Regular Range". A mortice handle works the latch of a mortice lock set into the door. Its straight rectangular backplate has a stepped, bevelled edge, a keyhole, and two screw holes at each end. The lever rises from a short round collar and widens gently toward a softly rounded tip. Part numbers: AIH-02 Catalogue code: 37160

AIH-112-P

AIH-112-P is an iron mortice door handle from the "Premium Range", made in 125mm and 200mm sizes, with three long inset grooves running down the face of its squared lever. A mortice handle works the latch of a mortice lock set into the door. The design comes in three styles: a long black backplate with a bright bevelled edge, a keyhole, four screw holes and a satin nickel-tone lever with dark inlaid grooves; a shorter brushed antique-brass-tone plate with four screw holes; and a satin silver-tone square rose with a matching square escutcheon cut for a profile cylinder. Part numbers: AIH-112-P Catalogue code: 37388

AIH-07

AIH-07 is a 175mm iron mortice handle with a scrolled, wave-topped lever on a round-ended backplate, from the Regular Range for doors with a mortice lock. The lever has a raised ridge and curls down at its tip, rising from a ringed round collar to work the lock's latch. The backplate has fully rounded ends and a raised border, with a traditional keyhole in the lower half and two screw holes at each end for fixing. The finish is a brushed, bronze-toned surface throughout. Catalogue code: 37151

AIH-08

AIH-08 is a 175mm iron mortice handle with an angular, block-ended lever and framed backplate, part of the Regular Range for doors fitted with a mortice lock. The straight square-section lever ends in a stepped block and turns the lock's latch. The rectangular backplate has bright polished edges and separately framed panels at the top and bottom, each with two screw holes for fixing to the door. A traditional keyhole sits in the brushed silver-coloured centre. Catalogue code: 37369

AIH-111

AIH-111 iron mortice handle in the Regular Range, offered in 125mm, 200mm and 250mm sizes for doors with a mortice lock. The tall rectangular backplate has softly rounded corners, a cut-out shaped for a profile cylinder and two screw holes at each end. Its lever starts from a pointed, faceted boss and tapers into a gently curved grip, all in a brushed antique-brass tone. Pressing the lever turns the lock's latch to open the door. Catalogue code: 37152

AIH-116

AIH-116 iron mortice handle in a 175mm size from the Regular Range, with a lever handle on a long backplate and a keyhole for a mortice lock. A mortice handle fits on the door face over a mortice lock set into the door and works its latch. This model has a brushed antique-brass-look finish. The rectangular backplate has rounded corners and four screw holes, two at each end. The angular lever comes off a squared neck near the top of the plate, and the keyhole sits below it. Catalogue code: 37387

AIH-114

AIH-114 iron mortice handle with a rounded, softly tapered lever, available in 125mm, 200mm and 250mm as part of the Regular Range. The lever ends in a gently curved tip and sits on a long backplate with rounded corners, all in a brushed antique-brass tone. Below the lever the plate has a profile-cylinder cut-out, with two screw holes at each end. Fitted over a mortice lock, the lever operates the latch for everyday door opening. Catalogue code: 37150

AIH-112

AIH-112 iron mortice handle from the Regular Range, sized 125mm and 200mm, for doors with a mortice lock. A flat, squared lever with a down-turned tip sits on a backplate with rounded corners and four screw holes, finished in a brushed antique-brass tone. It comes as a long plate with a keyhole cut-out below the lever, and as a shorter plate carrying the lever alone. Pressing the lever turns the lock's latch to open the door. Catalogue code: 37383

AIH-117

AIH-117 iron mortice handle from the Regular Range, offered in 125mm and 200mm sizes, with a brushed satin silver-tone finish and a squared lever that flares slightly toward its tip. A mortice handle fits on the door face over a mortice lock set into the door and works its latch. The design comes in three forms: a long backplate with a keyhole below the lever, a shorter backplate with a plain face, and a square rose with a matching square escutcheon cut for a euro-profile cylinder. Both backplates have rounded corners and four screw holes. Catalogue code: 37390

AIH-06

AIH-06 is a 175mm iron mortice handle with a shaped, shouldered backplate and a straight square-edged lever, part of the Regular Range for doors fitted with a mortice lock. The backplate has rounded, stepped ends and a dark, polished outer border around a brushed silver-coloured face. The lever runs straight out from a dark collar and drops slightly at the tip, turning the lock's latch. A traditional keyhole sits in the lower half, and two screw holes at each end hold the plate to the door. Catalogue code: 37157

AIH-01

AIH-01 is a 175mm iron mortice door handle on a long keyhole backplate with shaped, scalloped ends, from the "Regular Range". A mortice handle works the latch of a mortice lock set into the door. The plate pairs a glossy black-nickel outer frame with a brushed satin-nickel inner panel, and it fixes with one screw at the top and one at the bottom. A gracefully curved lever with a satin top sweeps out from a dark round collar. Part numbers: AIH-01 Catalogue code: 37158

AIH-118

AIH-118 iron mortice handle with a rounded, paddle-shaped lever on a round neck, from the Regular Range in 125mm and 200mm sizes. A mortice handle fits on the door face over a mortice lock set into the door and works its latch. The finish is a brushed satin silver tone, with a bright chrome-look ring where the lever meets its neck. The design comes as a long backplate with a keyhole below the lever, a shorter backplate with a raised square boss behind the lever, and a square rose with a matching square escutcheon cut for a euro-profile cylinder. Both backplates have rounded corners and four screw holes. Catalogue code: 37380

AIH-03

AIH-03 is a 175mm iron mortice door handle with a straight, squared lever, from the "Regular Range". A mortice handle works the latch of a mortice lock set into the door. The long backplate has rounded shoulders at both ends, a glossy dark chrome-tone rim around a brushed satin face, a keyhole, and two screw holes at each end. The lever stands out on a dark round collar and keeps a clean rectangular profile to the tip. Part numbers: AIH-03 Catalogue code: 37159

AIH-113

AIH-113 iron mortice handle with a sweeping, upward-curved lever, made in 125mm, 200mm and 250mm sizes in the Regular Range for doors fitted with a mortice lock. The lever rises from a squared neck on a long, slim backplate in a brushed silver tone with polished edges. The plate carries a cut-out for a profile cylinder and two screw holes at each end. Pressing the lever draws the lock's latch to open the door. Catalogue code: 37153

AIH-05

AIH-05 is a two-tone 175mm iron mortice handle from the Regular Range, pairing a dark gunmetal-coloured frame with a brushed silver-coloured centre panel, for use on a door fitted with a mortice lock. The straight lever widens toward a flat, flared tip and rises from a polished dark collar to operate the lock's latch. Below it, a traditional keyhole cut-out takes a lever lock key. The rectangular backplate fixes to the door through two screw holes at each end. Catalogue code: 37155

AIH-112-D2

AIH-112-D2 is an iron mortice door handle from the "Premium Range", made in 125mm and 200mm sizes, with a flowing floral vine pattern in a light metallic tone running along the lever and the plate. A mortice handle works the latch of a mortice lock set into the door. The design comes in three styles: a long matte-black backplate with a keyhole and four screw holes; a shorter antique-brass-tone plate with four screw holes; and a black square rose with a matching square escutcheon cut for a profile cylinder. Each carries the same flat, squared lever that turns down at the tip. Part numbers: AIH-112-D2 Catalogue code: 37385

Showing 20 of 21 in Iron Mortice Handles

Show 1 more

Mortice Locks19 products

AML-05 HSS

AML-05 HSS mortice lock in the Small KY range, pairing a brushed silver-tone case and forend with a brass-finish latch and deadbolt. It fits into a pocket cut in the edge of a door: the handle works the spring latch through a square follower, and the key throws the deadbolt. The case has rounded corners and a keyhole near its lower edge, and the forend has a fixing hole at each end. Three bit-style keys on a ring go with the lock. Catalogue code: 37450

AML-03

AML-03 mortice lock from the Small KY range. It fits into a pocket cut in the edge of a door, with a spring latch worked by the door handle through a square follower and a key-operated deadbolt below it. The case is black with rounded corners and sits behind a brushed silver-tone forend that has a fixing hole at each end. The latch and deadbolt have a bright chrome-tone finish, the follower is brass-coloured, and the keyhole sits in the lower part of the case. Catalogue code: 37453

CY-03-D

CY-03-D mortice lock with a triple deadbolt of three square bolts, from the Small CY range of mortice locks. The lock body sits in a pocket cut into the door edge and throws all three bolts into the frame to secure the door. The lock case is finished in red and has a keyhole-shaped cut-out for a lock cylinder. The three square bolts project in a row through a long, brushed silver-tone faceplate with fixing holes at each end. Catalogue code: 37171

CY-14 B

CY-14 B mortice lock from the Big CY range, finished in satin nickel tones on a black case, with four round deadbolts and a profile cylinder cut-out. The brushed cylindrical deadbolts and a satin sprung latch bolt throw from a long brushed silver forend, so the door locks at several points along its edge. A brass-coloured follower hub takes the handle spindle, and the keyhole-shaped cut-out takes the cylinder. Screw holes at each end of the forend fix the lock into the door edge. Catalogue code: 37458

CY-01-S

CY-01-S mortice lock combining a spring latch with a single deadbolt, from the Small CY range of mortice locks. Fitted into a pocket in the door edge, the angled spring latch holds the door closed while the square deadbolt locks it into the frame. The lock case is black, with a brass-coloured splined hub that takes the handle spindle and a keyhole-shaped cut-out for a lock cylinder. The latch spring is visible inside the case. Both bolts project through a long, brushed silver-tone faceplate with fixing holes at each end. Catalogue code: 37164

CY-01

CY-01 mortice lock body from the Big CY line, with a spring latch, a wide rectangular deadbolt and a keyhole-shaped cutout for a profile cylinder. The cylinder throws the deadbolt to lock the door, and the handle works the latch. The black body case carries a brass-coloured splined follower for the handle spindle. Latch and deadbolt have a polished silver finish and project through a brushed silver-tone faceplate drilled for fixing screws. It belongs to the Mortice Locks range. Catalogue code: 37161

CY-01 3S

CY-01 3S mortice lock from the Small CY range, a compact lock body with a silver-finish case and a profile cylinder cut-out, made to set into the edge of a door. A brass-coloured sprung latch bolt and a single wide brass-coloured deadbolt throw from a silver-finish forend. The latch works from the handle through a brass-coloured follower hub, while the deadbolt is worked by the cylinder fitted in the keyhole-shaped cut-out. Screw holes at each end of the forend fix it to the door. Catalogue code: 37455

CY-04-BH

CY-04-BH mortice lock from the Big CY range, with four round deadbolts, a black case and a profile cylinder cut-out, made to set into the edge of a door. The four cylindrical silver deadbolts and a sprung latch bolt throw from a long silver-finish forend, locking the door at several points along its edge. A brass-coloured follower hub takes the handle spindle, and the keyhole-shaped cut-out takes the cylinder. Screw holes at each end of the forend fix it to the door. Catalogue code: 37172

CY-03-S

CY-03-S mortice lock pairing a spring latch with three square deadbolts, from the Small CY range of mortice locks. Fitted into a pocket in the door edge, the angled latch holds the door closed and the three bolts lock it into the frame. The lock case is finished in red, with a brass-coloured splined hub for the handle spindle and a keyhole-shaped cut-out for a lock cylinder. The satin latch, with its spring visible inside the case, and the three square bolts project through a long, brushed silver-tone faceplate with fixing holes at each end. Catalogue code: 37201

CY-04-B

CY-04-B mortice lock body with four round deadbolt pins, a spring latch and a keyhole-shaped cutout for a profile cylinder. The four pins sit in a row below the latch bolt and extend into the door frame when the lock is turned, while the latch holds the door closed in everyday use. The body case is black, with a brushed silver-tone faceplate drilled for fixing screws. A brass-coloured splined follower takes the handle spindle, and the latch bolt has a polished chrome-look finish. It belongs to the Mortice Locks range. Catalogue code: 37199

ABL-02

ABL-02 baby latch: a compact mortice latch with a red body case and a square follower for the door handle spindle. Its spring-loaded latch bolt projects through a brushed silver-tone faceplate with two fixing-screw holes, keeping the door shut until the handle is turned. It sits in the Baby Latch line of the Mortice Locks range. Catalogue code: 37443

ABL-03

ABL-03 baby latch is a compact mortice latch in a black body case, fitted with a brass-coloured splined follower for the handle spindle. A polished spring latch bolt projects through a brushed silver-tone faceplate drilled for fixing screws; it holds the door closed and releases when the handle turns. Part of the Baby Latch line in the Mortice Locks range. Catalogue code: 37451

CY-04

CY-04 four-bolt mortice lock from the Big CY range, with a red case and a profile cylinder cut-out, made to set into the edge of a door. Four square deadbolts and a sprung latch bolt throw from a long silver-finish forend, spreading the lock across four points along the door edge. A brass-coloured follower hub takes the handle spindle, and the keyhole-shaped cut-out takes the cylinder that works the deadbolts. Screw holes at each end of the forend fix it to the door. Catalogue code: 37173

CY-03

CY-03 mortice lock from the Big CY range: a three-bolt lock body that sets into the edge of a door and takes a profile cylinder. A sprung latch bolt and three square deadbolts throw from a long silver-finish forend, so the door locks at several points along its edge. The case is black, with a brass-coloured follower hub for the handle spindle and a keyhole-shaped cut-out for the cylinder. Screw holes at each end of the forend fix the lock to the door. Catalogue code: 37165

CY-01-D

CY-01-D mortice lock with a single wide deadbolt, from the Small CY range of mortice locks. A mortice lock body sits in a pocket cut into the edge of a door and throws its bolt into the frame to secure the door. The lock case is finished in red and has a keyhole-shaped cut-out for a lock cylinder. A long, brushed silver-tone faceplate carries the rectangular deadbolt, with fixing holes at each end for screwing it to the door edge. Catalogue code: 37163

AML-01

AML-01 mortice lock from the Small KY range, set apart by a black case with angled, cut-off corners. Like other mortice locks, it fits into a pocket in the edge of a door, with a spring latch worked by the handle and a deadbolt thrown by the key. The latch and deadbolt have a satin brass-tone finish against a brushed silver-tone forend with a fixing hole at each end. The follower is silver-tone with a square hole, two brass-tone screws hold the case, and the keyhole sits near the lower corner. Catalogue code: 37452

AML-05

AML-05 mortice lock in the Small KY range, made to sit in a pocket in the edge of a door, with a handle-operated spring latch above a key-thrown deadbolt. Its black case has rounded corners and is held to a brushed silver-tone forend by two screws, with a further fixing hole at each end of the forend. The latch and deadbolt carry a bright chrome-tone finish, the square follower is brass-coloured, and the keyhole sits low in the case. Catalogue code: 37454

CY-01 BSS

CY-01 BSS mortice lock body in the Big CY line, pairing a brushed silver-tone case and faceplate with a brass-tone latch and deadbolt. It combines a spring latch with a wide rectangular deadbolt and a keyhole-shaped cutout for a profile cylinder, so the cylinder locks the door while the handle works the latch. A brass-coloured splined follower takes the handle spindle, and the faceplate is drilled for fixing screws. It belongs to the Mortice Locks range. Catalogue code: 37460

CY-03-BS

CY-03-BS mortice lock with three round pin deadbolts and a spring latch, from the Small CY range of mortice locks. Set into a pocket in the door edge, the angled spring latch keeps the door closed and the three cylindrical bolts lock it into the frame. The lock case is black, with a brass-coloured splined hub for the handle spindle and a keyhole-shaped cut-out for a lock cylinder. The latch and the row of round bolts project through a long, brushed silver-tone faceplate with fixing holes at each end. Catalogue code: 37169

Door Locks17 products

ADL-04-B-Latch

ADL-04-B-Latch is a Bullet door lock with three round chrome bolts, part of the Regular DL door lock range. The bolts throw from a chrome front plate on a black rectangular case with a central keyhole and two brass-toned screws, and a chrome plunger sits on the lower edge. A black box keeper with two screw holes and a ring of three keys come with the lock. Catalogue code: 37113

ADL-04-Solid

ADL-04-Solid door lock, a Solid model with a single large square bolt for securing a door. It belongs to the Regular DL door lock range. It is in the "Antq." finish; the unit itself has a black case with rounded corners and a bright chrome-look bolt and faceplate. A keyhole sits on the face of the case, and a separate black keeper with screw holes receives the bolt. Three keys come on a ring. Catalogue code: 37111

ADL-04-S-Latch

ADL-04-S-Latch door lock, an S Latch model with two square bolts for securing a door. It sits in the Regular DL door lock range. The black case has rounded corners and a keyhole on its face, held by brass-coloured screws. Two square chrome-look bolts project from a bright metal faceplate, and a chrome-look knob sits on the lower edge of the case. A separate black keeper with screw holes receives the bolts. Three keys come on a ring. Catalogue code: 37114

ATB-1CK

ATB-1CK tri bolt door lock with three round bolts, which throw together into the door frame for a three-point lock. The case has a brushed antique-brass tone, a rounded end and an embossed rectangular badge on the cover. The three cylindrical bolts have a bright chrome-look finish and project from a side forend. A large round knob sits on the top corner of the case. Catalogue code: 37214

ADL-05-S-Latch

ADL-05-S-Latch door lock, an S Latch with silver-tone bolts and forend set against a black case. It is part of the Regular DL door lock range and works with a key through the keyhole in the cover. The silver-tone forend holds a large square deadbolt above a smaller latch bolt, with a silver-tone turned knob below the case. The black cover has a rounded end and four screws. A black box keeper for the door frame and three keys on a ring come with it. Catalogue code: 37121

ADL-03-Bullet

ADL-03-Bullet is a Bullet door lock from the Regular DL range, with two round chrome bolts that throw from a chrome front plate. The black rectangular case has a central keyhole, two brass-toned screws and corner fixing holes. A black box keeper with two screw holes and a ring of four keys come with the lock. The finish is listed as Antq.; the unit itself has a black case with a chrome front plate and bolts. Catalogue code: 37120

ADL-03-Solid

ADL-03-Solid is a door lock with a single solid square bolt, part of the Regular DL door lock range. The chrome bolt throws from a chrome front plate on a black rectangular case with a central keyhole, two brass-toned screws and corner fixing holes. A black U-shaped keeper with four screw holes and a ring of four keys come with the lock. Catalogue code: 37115

ADL-04-Bullet

ADL-04-Bullet door lock with two round bullet-style bolts, a keyed lock for securing a door. It belongs to the Regular DL range of door locks. The case is black with rounded corners, a keyhole on the face and two brass-coloured screws. Two cylindrical chrome-look bolts project from a bright metal faceplate. A separate black keeper with screw holes receives the bolts. The lock comes with three keys on a ring. Catalogue code: 37117

ADL-04-Heavy

ADL-04-Heavy door lock in a Nikil finish, a keyed lock with two square bolts for securing a door. It is part of the Regular DL door lock range. The silver-toned case has shaped mounting lugs with screw holes around its edge and a keyhole on the face. Two square brass-coloured bolts project from a brass-coloured faceplate, and a small brass-coloured knob sits on the lower edge. A separate silver-toned keeper with screw holes takes the bolts. Three keys come on a ring. Catalogue code: 37116

AVB-1CK Verti Bolt

The AVB-1CK Verti Bolt is a surface-mounted vertical bolt door lock with a brushed satin silver-tone finish and a rounded D-shaped case. A vertical bolt lock secures a door by dropping its bolts down into an interlocking keeper, here a keeper with two loops along the straight edge of the case. A wave-edged thumb-turn knob on the case face works the lock, and four countersunk screw holes fix the case to the door. Part numbers: AVB-1CK Catalogue code: 37301

ATB-2C

ATB-2C tri bolt door lock with a key cylinder, offered in Antq. and SS finishes. Its three round bolts throw together into the door frame, locking the door at three points. The antique-tone version has a brushed case with a rounded end, an embossed rectangular badge and three bright chrome-look cylindrical bolts on a side forend. A round key cylinder with a keyway sits on the top corner of the case, framed by two fixing holes. Catalogue code: 37216

AHB-2CK Hepta Bolt

AHB-2CK Hepta Bolt door lock, a multi-bolt lock with seven round chrome-finish bolts along one edge that the key throws into the door frame. The body has an antique brass-tone finish with a brushed silver-tone front panel outlined by an engraved line. The key cylinder sits in a raised oval boss with a brass-tone keyway, and screw holes around the rim of the body take the fixings. Catalogue code: 37300

ADL-05-Antq

ADL-05-Antq door lock in the Antq. (antique) finish, a key-operated box-case lock from the Regular DL door lock range. The cover plate has a brushed antique-brass tone with a central keyhole and four corner screws, and the case has a rounded end. Two square bolts project from a brass-tone forend: a large deadbolt and a smaller latch bolt. A small turned knob sits on the underside of the case. Catalogue code: 37110

ADL-05-Brass-Latch

ADL-05-Brass-Latch door lock, an S Latch, pairing a black case with brass-tone bolts. It belongs to the Regular DL door lock range and is key-operated through a keyhole in the cover. A brass-tone forend carries a large square deadbolt and a smaller latch bolt, and a brass-tone turned knob sits beneath the case. The black cover has a rounded end and four screws. It comes with a matching black box keeper that receives the bolts and three keys on a ring. Catalogue code: 37109

ADL-04-Antq

ADL-04-Antq is the "Premium Slim" door lock in an Antq. finish, part of the Regular DL range. A wide square upper bolt and a narrower lower bolt, both gold-toned, throw from a gold-toned front plate. The antique-toned case carries a central keyhole, four screws and lobed corner fixing lugs, with a small gold-toned knob on its lower edge. A matching box keeper and a ring of three keys come with the lock. Catalogue code: 37119

ADL-04-Slim

ADL-04-Slim door lock in a Nikil finish, a keyed lock with one large square bolt above a slimmer lower bolt. It is from the Regular DL door lock range. The silver-toned case has shaped mounting lugs with screw holes and a keyhole on the face. The brass-coloured bolts project from a brass-coloured faceplate, and a small brass-coloured knob sits on the lower edge. A separate silver-toned keeper with screw holes takes the bolt. Three keys come on a ring. Catalogue code: 37112

ADL-04 Heavy Antq

ADL-04 Heavy Antq is the "Premium Heavy" door lock in an Antq. finish, from the Regular DL range. Two solid square gold-toned bolts throw from a gold-toned front plate, set against an antique-toned case with a central keyhole, four corner screws and lobed fixing lugs. A small gold-toned knob sits on the lower edge. A matching antique-finish box keeper and a ring of three keys come with the lock. Catalogue code: 37118

Mortice Cylinders22 products

AZH-05

AZH-05 mortice handle, size 200mm, listed under mortice cylinders, with a broad angular lever that bends gently downward toward its end and a profile cylinder cutout below it. The wide, flat lever has a brushed satin finish, and its base is wrapped by a squared collar in a polished bright finish. The backplate has rounded ends, a brushed satin face, a polished bright border and a polished bright cap at the bottom end, with four screw holes near the corners. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the cutout takes a profile cylinder for locking with a key. Catalogue code: 37479

ASZH-083

ASZH-083 is a mortice lever handle in size 200mm with a straight, two-tone cylindrical lever: polished silver-tone ends around a darker brushed grip. It sits on a long backplate with rounded ends, a raised border and a keyhole cut-out below the lever, in a brushed satin silver-tone finish. Four screw holes, two at each end, fix the plate to the door. Part numbers: ASZH-083 Catalogue code: 37395

OSK-60mm Premium Knob

This zinc-range "OSK-60mm Premium Knob" is a 60mm mortice cylinder in a brushed silver-toned finish, with a key on one side and a broad rounded thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The profile-shaped body carries a black central cam and a threaded fixing-screw hole. The wide, flat-faced knob turns the lock from inside, and the keyway at the opposite end works it from outside. Catalogue code: 37526

AZH-11

The AZH-11 is a door lever handle on a 200mm backplate, with a keyhole cut-out for a mortice lock key. The long rectangular plate has a satin, brushed silver-tone face framed by a bright polished raised border, and fixes with four screws, two at the top and two at the bottom. The lever is square in section with a brushed finish and flares out towards its tip. It is held on a square neck with a small side grub screw. Catalogue code: 37473 Part numbers: AZH-11

AZH-07

AZH-07 is a door lever handle with a slim, tapering lever that sweeps out from a polished chrome neck, set on a keyhole backplate and offered in the Mortice Cylinders range in size 200mm. The lever works the door latch, and the keyhole below it takes the lock's key. The plate has a brushed silver face framed by a raised polished chrome border with rounded corners. Four screw holes fix it to the door. Catalogue code: 37491

ASZH-082

ASZH-082 is a mortice lever handle in size 200mm with a scroll-tipped curved lever, set on a long backplate with shaped, arched ends and a keyhole cut-out below the lever. The brushed satin silver-tone plate has a raised border, and polished highlights run along the lever and its rose. Four screw holes, two at each end, fix the plate to the door. Part numbers: ASZH-082 Catalogue code: 37394

OSK-60mm Premium Knob

The "OSK-60mm Premium Knob" is a 60mm brass-range mortice cylinder with a key on one side and a thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Brass Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a polished gold-toned finish and a profile-shaped body with a black central cam and a fixing-screw hole below it. A rounded, flat-faced knob sits at one end, and a keyway at the other end lets the door lock from either side. Catalogue code: 37523

AZH-06

AZH-06 is a door lever handle on a long rectangular keyhole backplate, offered in the Mortice Cylinders range in size 200mm. The flat lever curves gently out from a square base block to work the door latch, and the keyhole below it takes the lock's key. The plate and lever have a brushed silver finish, with bright polished caps at both ends of the plate. Four screw holes, two at the top and two at the bottom, fix the plate to the door face. Catalogue code: 37492

AZH-10

AZH-10 is a two-tone door lever handle, pairing a brushed antique-bronze tone backplate and lever inset with polished chrome on the lever frame and its round rose. It is offered in the Mortice Cylinders range in size 200mm. The flat, square-cornered plate has a cylinder-profile cut-out below the lever to take a profile lock cylinder, while the lever works the door latch. Four screw holes fix the plate to the door. Catalogue code: 37480

AZH-01

AZH-01 mortice handle, size 200mm, listed under mortice cylinders: a lever handle on a tall rectangular backplate with a profile cylinder cutout below the lever. The lever is a tapered bar that flares toward its end and rises from a ball-shaped boss with two round openings, all in a polished bright finish. The backplate has a brushed satin face with a polished bright strip along one long edge and four screw holes, one at each corner. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the cutout takes a profile cylinder for locking with a key. Catalogue code: 37475

AZH-03

AZH-03 mortice handle, size 200mm, listed under mortice cylinders, with a square block boss and a classic key-shaped keyhole below the lever. The straight, flat lever has a brushed satin finish and tapers slightly toward a rounded end; it springs from a cube-shaped boss in a polished bright finish. The tall rectangular backplate has a brushed satin face and four screw holes, one at each corner. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the keyhole takes the lock's key. Catalogue code: 37477

ASZH-081

ASZH-081 is a mortice lever handle in size 200mm with a gently curved lever rising from a polished rose, set on a long backplate with shaped, arched ends. A keyhole cut-out sits below the lever for the key of the mortice lock it fits over. The plate has a brushed satin silver-tone finish with a raised border, and four screw holes, two at each end, fix it to the door. Part numbers: ASZH-081 Catalogue code: 37393

AZH-08

AZH-08 is a door lever handle with a straight, square-section lever in brushed silver that rises from a polished chrome collar on a keyhole backplate. It is offered in the Mortice Cylinders range in size 200mm. The lever works the door latch, and the keyhole below it takes the lock's key. The plate has a brushed face with a polished chrome edge and gently curved top and bottom ends. Four screw holes fix it to the door. Catalogue code: 37482

ASZH-084

ASZH-084 is a mortice lever handle in size 200mm with a slim, tapering lever and a brushed satin silver-tone finish throughout. The long backplate has rounded ends, a raised border and a keyhole cut-out below the lever, and four screw holes, two at each end, fix it to the door. Part numbers: ASZH-084 Catalogue code: 37396

BSK-60mm

The "BSK-60mm" is a 60mm zinc-range mortice cylinder for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a brushed silver-toned finish and a profile-shaped body, with a black central cam that works the lock bolt and a fixing-screw hole below it. Catalogue code: 37524

OSK-60mm Normal Knob

The OSK-60mm Normal Knob is a 60mm brass euro-profile mortice cylinder with a thumb-turn knob on one side and a key on the other. The knob lets the door be locked and unlocked by hand from the inside, while the keyway serves the outer face. It has a polished gold-tone brass finish, a flat oval knob, a black centre cam and a fixing-screw hole in the lower body. It belongs to a brass range of cylinders sized 60mm to 100mm. Catalogue code: 37522 Part numbers: OSK-60mm

OSK-60mm Normal Knob

The "OSK-60mm Normal Knob" is a 60mm zinc-range mortice cylinder with a key on one side and a slim thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a brushed silver-toned finish and a profile-shaped body with a black central cam and a threaded fixing-screw hole. The narrow, flat thumb-turn locks the door from inside, while the keyway at the other end serves the outside. Catalogue code: 37525

AZH-12

The AZH-12 is a door lever handle on a 200mm backplate, with a euro-profile cylinder cut-out for a mortice cylinder lock. The plate has a satin silver-tone face inside a bright polished raised border and fixes with four screws, two at the top and two at the bottom. The lever is mirror-polished, with a rounded, leaf-like swell at the rose that tapers into a slim, gently curved arm. Catalogue code: 37478 Part numbers: AZH-12

BSK-60mm

The BSK-60mm is a 60mm brass euro-profile mortice cylinder, the key-operated locking core fitted into a mortice door lock. It has a polished gold-tone brass finish, a black centre cam that turns to work the lock bolt, and a fixing-screw hole in the lower body. The front face carries a round keyway plug. It belongs to a brass range of cylinders sized 60mm to 100mm. Catalogue code: 37521 Part numbers: BSK-60mm

AZH-09

AZH-09 is a door lever handle on a flat, square-cornered backplate with a cylinder-profile cut-out, offered in the Mortice Cylinders range in size 200mm. The cut-out below the lever takes a profile lock cylinder, and the lever works the door latch. The brushed silver lever carries a polished chrome inset along its top face, and the plain brushed silver plate is fixed to the door with four screw holes. Catalogue code: 37481

Showing 20 of 22 in Mortice Cylinders

Show 2 more

Disclaimer

Information shown here is compiled from the details provided by the seller.

Legal name	Arme Locks
Location	Aligarh, Uttar Pradesh, India
Category	Locks & Builder's Hardware
Speciality	Mortice Handles, Mortice Cylinders, Mortice Locks, Door Locks
Address	C-233,234,Sec-2,Tala Nagari, Ramghat Road
Website	www.armelocks.com
Email	info@armelocks.com
Catalogue	138 products across 6 categories
Exports	Yes
Quality	We are using high quality material at every stage. Our plant is equipped with ultra modern machines along with research & development department to keep a continuous tab on high-grade quality.
Brands	TAWRI, ARME
Parent manufacturer	Gupta Industries
Export markets	Middle East, South East Asia & North America
Other phones	+91 89586 09582 (Alternative Inquiry Line)
facebook	facebook.com/arme.locks

Arme Locks

Shop by category

Their products

The company

What's verified

In their own words