All products

Packaging Machinery

Model FXA 6050 is a carton sealing machine that tapes the top and bottom of a carton at the same time. It has a white frame on castors, roller conveyor sections on both sides, a top tape head with a tape roll, a vertical yellow scale on the column and a front switch panel. It seals cartons from 140 x 150 mm to 500 x 600 mm (W x H), uses 36 mm, 48 mm or 60 mm tape and handles approximately 1000 standard cases per hour, for carton packing in electrical appliances, textiles, foodstuffs, general merchandise, medicines and chemicals.

Double Row Angular Contact Ball Bearings

KAZI 3209 double row angular contact ball bearing: 45 mm bore (ID), 85 mm outer diameter (OD), 30.2 mm width.

Designer Collection - Table Top

Jio X-004 is a ceramic table top wash basin from the Designer Collection with a bright red glossy inside and a cream outer wall wrapped in a red floral and leaf pattern. The thick, rounded rim carries thin red lines, and the bowl is square with softly rounded corners. This classic Table Top blends style and practicality and is designed to complement any bathroom decor. Its elegant contours and smooth finish give it a timeless appeal. It is made from premium-grade ceramic that resists stains and scratches, for long-lasting beauty.

Door Hardware

Compact solid brass rim lock privacy set for screen doors and bathroom doors, finished in polished brass, and also suited to interior cabinets. The set comprises the rim lock case with a square spindle opening, a keyhole and a projecting bolt, a matching brass keeper, a rectangular keyhole escutcheon and two skeleton keys. The finish resists corrosion and wear, and the lock gives smooth operation and reliable latching through frequent use. It installs easily and brings a traditional brass look to small doors. Catalogue code: GMC-1400MRL-K

Conversion Kit

Legender conversion kit with tail light, compatible for Toyota Fortuner 2017 - 2020, restyling the Fortuner of those model years with the Legender front and rear. The kit holds a two-piece black front bumper, a black grille with a wave-pattern mesh and a round centre surround, a pair of slim headlights with gloss black upper trim, and a pair of red split tail lights. Fog lamps, a black lower garnish strip, side trim mouldings, mounting brackets, wiring connectors and a bag of fixing clips come with it. Catalogue code: GA0347

600x1200 GVT 2021

Matrix Carbon is a 600 x 1200 mm GVT tile in a matt finish, with a deep charcoal stone look traced by pale cream-white veins and fine cracks. It belongs to the "Polished Glazed Vitrified Tiles" 600x1200 mm range and comes in 7 faces, so the pattern varies from tile to tile. Tile thickness is approx. 9. Each box holds 2 pcs, weighs approx. 32 Kgs and covers 1.44 sqm.

Elevation Series

Elevation Series 61075 is a 450 x 300 mm wall tile with a multi-coloured brick design mixing cream, grey, tan-orange and deep maroon-brown bricks. The rough-textured bricks are laid in a running bond with light mortar lines, and the varied tones create a patchwork, reclaimed-brick look. The tile is sold as 100% water proof and comes in matt and glossy finishes. Catalogue code: 61075

Stainless Steel Mortice 200MM

Kodia Otis 1606 mortice handle, offered in KY & CY versions and in SS and Antique finishes, from the Stainless Steel Mortice 200MM range for doors fitted with a mortice lock. The satin stainless steel unit has a broad, gently curved lever on a square boss, mounted on a rectangular backplate with a keyhole cut-out, four screw holes at the corners and the Kodia logo. The lever works the latch of the mortice lock. Catalogue code: 1606 KY & CY (Otis 1606)

Men's T-shirt

Coral men's polo T-shirt in a soft heathered shade, with a left chest patch pocket. A flat collar, two-button placket with tonal buttons and banded short sleeves complete the shape, and a small light logo sits on the pocket.

MTechnics bash plate for the Royal Enfield Classic 350 and Reborn 350. It protects the engine and underbody from rocks, debris and road hazards on rough terrain and long-distance rides, while keeping ground clearance and engine airflow. It is made from 2mm heavy-gauge steel sheet, reinforced with 4mm clamps for strength and stability, and finished in corrosion-resistant matte black powder coat. The angled front panel bolts on at the top, and the lower tray has vent slots along its sides that allow air circulation and easy maintenance access. Product weight is listed as 1.987 gm; dimensions are 48 x 27.5 x 17.5.

Wooden Tiles

Amazon Choco is a weathered, distressed wood-look plank tile in a matt finish, sized 20x120 CM, from the Amazon collection of Wooden Tiles. The face recreates aged timber in brown tones, with darker patches, worn and flaked areas, scratches and crack lines across the surface for a rustic, reclaimed-plank character. The Amazon collection pairs this colour with Amazon White. It is rated for water absorption of < 0.05% (ISO-10545-3), breaking strength of > 1800 N (ISO-10545-4) and surface abrasion resistance of Class PEI 4 (2100 revolutions) (EN 154). Mohs scratch hardness is 5 (EN 101), stain resistance is Class 5 (ISO-10545-14), frost resistance is a Pass (ISO-10545-12), and reaction to fire is Class A1 - A1 fl.

TABLE TOP BASIN

The "FRANCO" is a rectangular table top basin sized 500 X 400 X 130 mm, designed to rest on a bathroom or washroom counter. Its sides flare outward from a narrower base to a wide, squared rim, and the bowl slopes down to a round drain at the centre, giving a crisp, angular look. The glossy basin is offered in White and Ivory.

Ceramic Wall Tiles

4592 H2 is a 60x30 CM matt ceramic wall tile in the 4592 collection, with an even all-over grid of faceted triangles in a single warm greige tone, lightly speckled and outlined in fine darker lines. It is part of the Texture & Decor look, alongside 4592 H1, 4592 L and 4592 D. The figures that matter for choosing: water absorption > 12-18% (ISO-10545-3), breaking strength > 800 N and modulus of rupture > 18 N/mm2 (ISO-10545-4), stain resistance Class 5 (ISO-10545-14), and a Pass for both frost resistance (ISO-10545-12) and thermal shock resistance (ISO-10545-9). Catalogue code: 4592 H2

Elevation Series

Stone-cladding-look wall tile, Elevation Series design 61138, in the 450 x 300 mm size. Rough, split-stone style blocks in slate blue-grey, rust orange, sand and ash grey are laid in a staggered brick bond with wide grey joints, giving a rustic natural-stone wall effect. The tile is 100% water proof and is offered in both matt and glossy finishes. Catalogue code: 61138

Designer Collection - Table Top

Shallow - 105 is a designer table top basin from the Designer Collection, decorated as amber-orange wooden staves with etched tribal patterns. The outside is divided into upright panels in honey and amber tones; several panels carry fine line patterns of zigzags, waves, triangles and crossed lines in dark brown. A band around the rim shows small dot marks at each panel joint, like studs on a wooden tub. The boat-shaped bowl has upswept ends and a tapered base, with a glossy amber interior edged by a dark brown rim line.

Special Universal Connectors

Ashok Leyland 7 pole female connector, round in form, supplied with 4mm deluxe wire 9 inches long for joining into an Ashok Leyland wiring harness. A pre-wired connector like this replaces a damaged plug end, with the circuit restored by splicing the new leads in. The round black housing has a ribbed outer collar and seven round socket cavities, six arranged around one in the centre. Packed 10 pieces. Catalogue code: SH2100791

Oil Mill Machinery

Oil neutralizer that removes free fatty acids (FFA) from oil, compulsory for cottonseed oil and castor oil treatment, offered as the TPN1 and TPN2 batch models. Cottonseed oil has higher FFA, which the neutralizer removes. Removing the acid as soon as possible stops a bad odour developing over time, which would otherwise call for a complete refinery plant, an expensive and capital intensive project. Oil heating is part of the neutralising process, by steam or by electric heaters, so two types are supplied: one works with a boiler, the other heats electrically and runs boiler-free. Castor oil treatment calls for a boiler. Depending on the oil to be processed, the neutralizer is equipped with a spraying system, open steam system, hot water injection system and agitation system. When ordering, state the capacity needed and whether a boiler is on site. The vessel is a teal vertical tank with a conical bottom on angled legs and a motor drive on the top cover; one variant carries a panel on its front. Models (capacity / net weight / volume in cubic meter): TPN1 500 liters / batch, 300 kg, 1.5 · TPN2 1000 liters / batch, 600 kg, 3.5

Single Thrust Ball Bearings

KAZI 51111 thrust ball bearing: 55 mm bore (ID), 78 mm outer diameter (OD), 16 mm width.

WALL MOUNTED CLOSET

"DIEGO" wall mounted closet, a wall-hung toilet (WC) with a rounded oval bowl, sized L-490, w-330, H-450mm and available in White and Ivory. Fixed to the wall above the floor, it keeps the floor clear for easy cleaning. The bowl has smooth, curved sides that taper towards a rounded base, with a domed oval seat and lid on top. A small metal fitting sits on the side of the bowl.

Single Thrust Ball Bearings

KAZI 51244 thrust ball bearing: 220 mm bore (ID), 300 mm outer diameter (OD), 63 mm width.

Brass Mortice Handles

Kodia 215 Falcon 250mm GS brass mortice handle, a lever handle on a long backplate for doors fitted with a mortice lock. The GS version has a two-tone finish: polished gold-tone edges, rose and collar set against a satin silver-tone plate and lever grip. The backplate has a scalloped top and bottom, four screw holes and a cut-out for a profile cylinder below the lever. The lever curves out from a round rose into a tapered, shaped grip ending in a small round knob. Catalogue code: 215

Door Hardware

6-inch Colonial bean strap hinges, a compact pair of forged heavy-duty wrought iron T-hinges for antique furniture restoration, cabinetry, farmhouse doors and gate projects. The classic bean-end design brings colonial character to DIY restorations and professional carpentry work alike. Each hinge has a straight fixing leaf, a knuckle and a short tapered strap ending in a broad round bean end with a hand-hammered texture, fixed with slotted dome-head screws. The black finish resists corrosion and keeps its aged appearance through daily wear. Each set includes a pair of hinges for a uniform look across an installation. Catalogue code: GMC-CBSH6-K

Dead Lock & Sliding Locks

Kodia 1176 brass dead lock with D/T SS keys, also known as 1176 (BRASS), a key-operated door dead lock offered in 2", 2½" and 3" sizes. Its brass case is stamped "BRASS BODY" and carries a square brass bolt, set against a satin silver faceplate with two countersunk screw holes. A keyhole on the case face takes the key, which throws the bolt to hold the door locked.

Wooden Tiles

Brama Brown wooden tiles in a matt finish, a 20x120 CM plank size with a wood look. The face shows warm honey-brown grain with flowing arched figure and a small dark knot. For choosing: surface abrasion resistance is Class PEI 4 (2100 revolutions) (EN 154), water absorption < 0.05% (ISO-10545-3), breaking strength > 1800 N (ISO-10545-4) and frost resistance Pass (ISO-10545-12). The Brama collection also comes in Brama Ivory.

Suspension Components

Rod Links for suspension assemblies, machined as black-finished blocks in two designs. One is a plain rectangular block with a small and a large round bore on top, marked with a curved two-way arrow reading "hard" and "Soft". The other carries a raised diamond-shaped flange with two small holes over its bore, next to a large round bore. Both have a threaded port on the side face. They sit in the seller's suspension components group, together with shock absorbers, struts and screw caps, aimed at ride stability, handling and control on the road. The range is made in aluminium, brass, SS, MS and plastic.