All products

LED Bulbs

LED indicator bulbs with 22 SMD COB LED chips, a set of 4 for front and back turn signals on motorcycles and cars, listed for the MT 15 and R15 V4. Each bulb draws 4W and gives super bright 6000K light that keeps the vehicle clearly visible to other drivers, with an immediate response on every blink. A built-in intelligent IC driver regulates voltage and protects against current fluctuations, for stable blinking and an extended lifespan. Power use is significantly lower than a traditional halogen bulb. Each bulb has a silver metal bayonet base and a flat round face packed with SMD chips. The set installs easily in front and rear turn signal housings across a broad mix of motorcycles and cars.

Side Tables

Narrow rectangle teak table top, W140x D28 x H24 Cm., a low outdoor side table for garden and modular sofa seating. It is listed as a table with a teak wood base and powder coated aluminium legs, in metal and teak wood. Teak slats laid crosswise form a long top with rounded ends, set on two flat black metal panel legs. Part of a luxury outdoor furniture range, it is made by skilled craftsmen for long-lasting outdoor durability and comes with 5 years of warranty* for manufacturing defects. Metal frame colours: Black Textured, Dark Brown Textured, Dark Grey Textured, Honey Textured, Light Grey Textured, White Textured Catalogue code: LCO/013/045 (collection LCO-013)

Exhaust

Red Rooster RRP Rumbler Ace (Polish) exhaust for the Royal Enfield Classic 350 (2024-2026), a direct bolt-on silencer also made for the RE Classic 350/500, Standard 350/500 and Thunderbird 350/500. The Rumbler Unibody is a jointless single-piece SS304 stainless steel body for strength, long life and corrosion resistance. Its free-flow design improves gas flow for better throttle response, pickup, torque and horsepower, with the deep Royal Enfield thump. Ceramic wool packing handles heat and noise, and a removable DB killer switches between a refined city note and a bold highway roar. The polished silencer has a tapered body and slash-cut tip, and comes with a link pipe, brackets, nuts and bolts. Fits: BULLET STANDARD, CLASSIC 350, RE HUNTER 350

Sofa Double Seaters / Love Seats

Wide center module with cushion, a double-seater love seat for outdoor garden modular sofas, W120 x D100 x H81 Cm. Hand-woven synthetic wicker covers its powder coated aluminium frame for lasting outdoor durability. Cushions pair Agora 100% solution dyed acrylic fabric from Spain with high density foam, under removable washable covers. A 10-year warranty* covers manufacturing defects. Catalogue code: LCO/006/006 (collection LCO-006) Wicker colours: Java Brown, Java Brown STR, Golden Bronze, Luke Golden, Ebony Golden STR, Ebony Silver STR, Natural Honey, Camel Brown STR, Coffee Brown STR, Khaki STR, Silver Grey, Ash Grey STR, Ivory, Off White, Pearl White, Vanilla White Cushion colours: Blanco, Avena, Toffee, Basalto, Amarillo, Mostaza, Azafran, Rojo, Brasserie, Terracota, Verde Claro, Verde, Turkis, Indigo, Azul

Turbocharger

Garrett turbocharger for the Tata Tiago, part number 825088-0001, also numbered 570714510101. The brand is also listed as TEL, and the unit's Garrett label reads GTX P/N 825088-5001S. It forces more air into the engine for better combustion, raising power and improving acceleration and responsiveness, while the extra power comes with little rise in fuel use, so overall fuel efficiency improves. Designed specifically for the Tiago's engine, it installs with minimal modifications and suits both replacing a worn-out turbocharger and lifting performance. The silver cast housing carries a round wastegate actuator fed by a blue hose, a curved compressor outlet with a beaded end and a flanged exhaust inlet. Part numbers: 825088-0001, 825088, 570714510101

Riding Jacket

Axor Falcon riding jacket, a textile motorcycle jacket in MaxTec 600-D with Soft-shell Dublan 2500-D at the stretchable panels and Cordura at the impact zones. An additional rain liner comes with it for wet-weather rides. It is off-white and black with red accents, black mesh panels on the chest and back, grey reflective bands on the sleeves and the AXOR mark on the chest and back. 3M Scotchlite Traditional Polarization Reflectors (TPR) sit at 8 technically located reflective points for low-light visibility, and double stitching adds durability. It also has 2 waterproof pockets, a neoprene collar and cuffs, auto lock zips, girth adjusters at sleeve and waist for a snug fit, and a jacket-to-trouser zipper integration system.

Full Face Helmet

Orange colourway of the KYT TT-Revo Combustion full face helmet, built for sport touring riders. It comes with ECE 22.06 and ISI certification. The shell is made in three sizes (M & L) from ADT-advanced thermoplastic, a mix of thermoplastic resins with high resistance to crashes, and ventilation channels are formed in the polystyrene. Bright orange and amber shards with white and grey accents cover a black and smoke-grey shell, with large KYT lettering on the sides and TT-REVO printed in orange at the rear. A dark tinted visor, top and chin vents, rear exhaust vents under a built-in rear spoiler and red neck lining complete the helmet.

Hooks

The "Nemuel" Black Antique iron hook is a three-arm cast iron coat hook in a black powder coated finish, for hanging coats, bags and similar items on a door or wall. A long upright arm rises above two short curved arms that spread to either side, all with rounded tips, and two screw holes sit side by side in the body. The hook is supplied as one piece with matching screws, is made in India, is packed in U P, India, and carries a 2 year warranty. Catalogue code: SH-NEM-HOK-039-IR

Shelf Brackets

The "Maaz" Black Antique Iron Shelf Bracket is a cast iron shelf bracket, 203mm x 203mm x 6mm, with a smooth curved brace between its arms. Holes are 134mm apart on each arm and 31mm apart at the corner. The Black Powder Coated finish gives an anti-rustic or vintage look. It gives a shelf strength and beauty and suits kitchens, garages, corners, utility closets, workshops and backyards, in styles from sleek and modern to farmhouse. Self-installation is easy on home wooden shelves, a floor corner or an altar; it fits large boards of 10.5" inch length or more. Matching screws are included. It is supplied as one piece, made in India, with a 2 year warranty, and also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered. Catalogue code: SH-MAA-SBKT-024-IR

Turbocharger

Petrol (gasoline) turbocharger by IHI for the Audi A3, A4 and A5 1.8L TFSI, listed under part number 06K14654A. It cross-references the RHF4 family and the 06L145701 and 06L145654 letter series below. The seller states it raises horsepower and torque for better acceleration, optimises exhaust gas flow for improved fuel economy and lower emissions, is made from durable materials to withstand high temperatures and pressures, and installs easily on Audi A3, A4 and A5 models. The unit is a silver cast turbocharger with an exhaust inlet on a four-bolt mounting flange, a round flanged outlet, and an actuator with rod linkage on the side. Sold per piece. Part numbers: JHJ, 2101600, F41CEG-SR029B, F41CEGSR029B, 9VA07RS, T916664, 9VA06K, 9VA06RS, 06L145654G, 06L145654F, 06L145654E, 06L145654D, 06L145654C, 06L145654A, 06L145654, 06L145701L06L145701K, 06L145701J, 06L145701H, 06L145701G, 06L145701F, 06L145701E, 06L145701D, 06L145701C, 06L145701B, 06L145701A, 06L145701, 2101604, 06L145654CV, 06L145654DX, 06L145654GX, 06L145701AX, 06L145701DX, 06L145701EX, 06L145701FX, 06L145701GX, 06L145701HX, 06L145701JX, 06L145701KX, 06L145701LX, 06L145654AX/06L145654CX, 06L145654FX, 06L145701CX, 06L145654EX, 06L145701BX, 06L145701EV, 06L145701FV, 06L145701GV, 06L145701HV, 06L145701JV, 06L145701KV, 06L145701LV, 9VA08RS, 06K145701E, 06K145713J, 06L145721C OEM numbers: 9VA24, F51CEF-SR052B, 06K145713F, 06K145713E, 06K145713EV, 06K145713EX, 06K145713FV, 06K145713FX, 06K145713G

Hooks

The "Swan" Black Antique iron hook is a decorative cast iron wall hook in a black powder coated finish, shaped as a long-necked bird, for hanging coats, bags or towels. The bird stands on one slender leg with the other folded, and its wings carry finely detailed raised feathers. The standing leg runs down into a curved hook at the base. A matching screw is included. It is supplied as one piece, made in India, and carries a 2 year warranty. Catalogue code: SH-SWA-DKN-024-IR

Bell Push

"Eglaim" decorative brass bell push, a rectangular doorbell plate with bold palmette ornament. It is made of solid brass and supplied as one piece. The finish displayed is listed as Antique Brass, and the available finish as Antique Copper. Raised palmette and cross motifs on a dark textured ground surround a ring of geometric pattern, with a domed push button at the centre. A raised edge frames the plate, and two screw holes sit at the top and bottom. Matching screws come with it. Made in India, with a 5 year warranty. Catalogue code: SH-EGL-BEL-007-BR

This small visor with clamp is made for the Yamaha XSR 155 and is listed under the XSR 155 in the bike menu. It is a sleek GTR PITSTOP bike visor that adds style and wind protection over the headlamp for a smooth ride. The visor is a compact rounded screen that bolts above the round headlamp. It comes in dark black, smoke and clear tints. The fitting kit holds two black slotted brackets, four bolts, four nuts, four washers and four rubber grommets.

LATCH ALDROP

The Q-Seven Wave Latch Aldrop is a sturdy door aldrop in PU Silver Satin Finish, made from White Metal and sold in 8 inch (200MM) and 10 inch (250mm) lengths on a 12MM rod. It is easy to install and blends traditional design with modern durability, adding security and elegance to home or office doors. It suits securing entrances or giving interior doors a refined touch, and its rust-resistant finish gives lasting performance. The brushed silver hasp has a wavy edge across its front, and three brackets sit on screw-fixed feet. Packed weight is 0.65 kg for 8 inch and 0.7 kg for 10 inch. Made in India, with nationwide delivery. Catalogue code: 0H-BCXW-WN3O 8" (8 inch) · 0H-BCXW-WN3O 10" (10 inch)

Turbocharger

Garrett turbocharger for the Mercedes-Benz C-Class W203, Garrett part number 727461-0007, Mercedes OEM number A6460900080. It suits the C 200 CDI and the Coupe (L203), and the W204 C-Class as well. The turbo lifts horsepower and torque for smoother, more responsive acceleration. Garrett makes it from durable materials that withstand high temperatures and pressures for long service, and it is made to OEM standards so it fits in place of the original with little installation hassle. It has a cast Garrett housing with two large round openings, one showing the compressor wheel, a nameplate on the housing, and an actuator linkage rod running along the mounting bracket. Part numbers: 727461-5001RS, 727461-0001, 727461-0002, 727461-0003, 727461-0004, 727461-0005, 727461-0006, 727461-1, 727461-2, 727461-3, 727461-4, 727461-5, 727461-5001S, 727461-5002S, 727461-5003S, 727461-5004S, 727461-5005S, 727461-5006S, 727461-5007S, 727461-9007S OEM numbers: 6460900080, A6460960099, 6460960099, 646096009928, 646096009980

Full Face Helmet

Vega Bolt Speed X full-face motorcycle helmet in dull black and grey, carrying the ISI mark to IS:4151 and a DOT mark. Its graphic of an eagle symbolises speed, laid out in white, grey and olive tones across the shell, for riders who enjoy the freedom of the open road. It has a clear visor, crown vents, a chin vent and a rear spoiler, with "VEGA" and "BOLT" lettering on the sides and "SPEEDX" on the back. The rear label reads "TWO WHEELER HELMET" with CM/L 1650145.

Pashmina Kani Shawls & Stoles

Kani art Pashmina shawl, 80x200cm, made of finest Pashmina from Kashmir with a traditional kani design border woven by hand using sticks. It is hand-spun and hand-woven, and each kani border is unique. The soft grey-green ground carries rows of paisley motifs in rose, olive and fawn along the border, and the ends finish in a twisted fringe. It drapes over the shoulders as a shawl or knots at the neck as a scarf, and weighs 0.08 kg. Catalogue code: KT 080

Olla Irrigation pots

Olla pots from Ajay Pots are brown clay olla irrigation pots for pitcher irrigation on farms and in gardens. A falling water table and rising salinity, caused by heavy use of chemical fertilizers and pesticides, have made water conservation essential for farmers. Pitcher irrigation is cost effective, farmer-friendly and easy to install, unlike present-day sprinkler and drip irrigation. This olla has a rounded teardrop body, a narrow neck and a green top. The minimum order is listed as 1000 pieces and as 100 cartons. Production capacity is 1,00,000 per month, with delivery in 30 - 45 days from Tuticorin or Chennai port. Payment is by T/T (bank transfer), with export packing, multi color packing or bulk packing. Catalogue code: CHO004

Lathe Machine

Mini bench lathe machine, model "Mini Lathe 7x12/7x14", for precision turning, facing, threading, boring and drilling of small metal parts in tool rooms, workshops, maintenance departments, laboratories, training institutes and hobby use. Electronic variable speed control runs the spindle from 100 to 2500 RPM, and a 550W (0.75 HP) motor drives it through a belt. At 700 mm x 300 mm x 380 mm (approx.) and about 40 kg, it is portable and fits benches where space is limited, suiting single-piece or small-batch production and prototyping. A heavy-duty cast iron bed gives stability and vibration resistance, and the machine is built for sturdy, durable construction, smooth and reliable operation, easy operation and low maintenance, long service life and an accuracy of 0.05 mm. Semi-automatic and manual modes are set with simple toggle and rotary switches, using precision lathe technology. It swings 180 mm over the bed, takes 300 mm between centers on a 100 mm bed, and has a 20 mm spindle bore, MT2 tailstock taper, a 0.5-2.5 mm thread pitch range and 50 mm cross slide and compound slide travel. It runs on 220V, 50/60 Hz, within a 5C - 45C operating range. Lubrication is manual, cooling is manual with an optional oil pump, and the finish is paint coated or powder coated in Blue & Grey. The headstock carries a digital display and a red emergency stop, with a chuck guard over the 3-jaw self-centering chuck and a four-way tool post on the carriage. It comes with a tool box, gears, adjustment tools, an oil can and centers, and suits a workshop bench or cabinet top. Different specifications are available as per customer requirements, with customer support; minimum order is 1 piece.

Side Tables

Teakwood side table with an HPL top for outdoor garden dining and cafe seating, sized W50 x D50 x H60 Cm. Part of a luxury outdoor range, it combines teak wood with powder-coated aluminium framing, and its four slender legs meet in a black cross stretcher. Made for long-lasting outdoor durability, it comes with 05 years of warranty* for manufacturing defects. Catalogue code: LCO/029/011 (collection LCO-029) HPL top colours: AFRICAN WALNUT, AMERICAN WALNUT, BLACK SILVER, BRIGHT WHITE, BROWN DUGLAS, EMPERADOR, GRANVILLE, OXFORD CHERRY, PERLATO, QUARTZ IVORY, ROYAL TEAK Metal frame colours: Black Textured, Dark Brown Textured, Dark Grey Textured, Honey Textured, Light Grey Textured, White Textured

Front fender number plate clamp holder in black for the BAJAJ Dominar and Duke range, covering the Dominar 250, Dominar 400 and Duke 125, 200, 250 and 390. It holds the front number plate above the front mudguard. The holder is a U-shaped black tubular bracket. A flat plate with two holes across the top carries the number plate, and each leg has two drilled tabs that bolt to the fork area beside the wheel. Fits: DOMINAR 250, DOMINAR 400, Duke 125, Duke 200, Duke 250, Duke 390

Door Pulls

The "Benzoheth" Black Antique Iron Door Pull With Back Plate (Right Hand) is a cast iron door handle, its curved grip set on the right side of a fleur-de-lis back plate. It comes as one piece in a black powder coated finish with matching screws. The pull measures 178mm x 12.5mm (56mm height) and the back plate 254mm x 48mm x 5mm. Screw holes sit 148mm apart lengthwise and 27mm apart at each end. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-BEN-DOP-035-IR

Lentils

Marwadi Moong (400 GM) is a fried moong namkeen, a mix of whole green moong and golden split pieces with a light glossy coating. It comes in a 400 GM pack and has a shelf life of 60 days. Delivery takes 2-3 days within Rajasthan, 3-5 days across UP, Uttarakhand, HP, Delhi, Punjab and Haryana, and 3-5 days to the rest of India.

Door Bells

The "Irice" Brass Decorative Manual Old Fashioned Door Bell-PT-2 comes in a Black Powder Coated finish over solid brass, with a smooth domed bell and a tall rectangular key plate. Turning the lever key on the plate rings the bell. It is supplied as one piece with matching screws. The bell sits on an ornate scrolled base with screw holes at top and bottom, and the plate is cast with leaf motifs at each end and column details beside the key. The bell measures 150mm x 97mm x 37mm, with 106mm hole to hole; the plate measures 108mm x 49mm, with a 29mm height and 57mm hole to hole. Made in India, with a 5 year warranty. Catalogue code: SH-IRI-DBL-015-BR

Ashok Leyland Dost

crank oil seal Ashok Leyland dost