Shristy Hardware
Manufacturer, Wholesaler, RetailerAligarh, Uttar Pradesh
Business type
Manufacturer, Wholesaler, Retailer
Based in
Aligarh Uttar Pradesh
Catalogue
695 products in 34 categories
Shop by category
All products →Their products
695 items across 34 categoriesAldrops9Door Bolts22Door Knocker92Door Handles20Door Pulls70Door Knobs8Hooks45Letters And Numerals74Letter Plates And Mail Slots11Push Plates11Bell Push17Door Bells18Cylinder Pull2Door Studs And Nails Domes15Handrail Brackets4Door Stoppers2Key Hole Covers Escutcheons4Hinges84Sign Plates14Iron Door Grills2Castors2Cabinet Pulls18Drawer Pull26Drop Pulls13Cabinet Knobs19Corners7Gate Latches14Hasp Staples8Shelf Brackets30Floor Registers6Bath Hardware2Cabin Hooks17Casement Stay6Window Fasteners3
Aldrops9 products
12" "Ohel" Black Antique Iron Aldrop
₹1,465/piece
12" "Ohel" black antique iron aldrop with a floral-engraved hasp and housing: a door bolt in Black Powder Coated finish for bedroom, kitchen and drawing room doors, 12" overall. Its 13mm thick rod runs through three guides on two-hole plates, and the label reads 409mm = 12 inch across.
Made of wrought iron & iron, it is also described as cast iron. "Ohel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area; the design is meant to enhance the beauty of a home.
Supplied as one piece with matching screws, it is made in India with a 2 year warranty.
Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
Catalogue code: SH-12"-OHE-ALDP-002-IR
10" "Ophel" Black Antique Iron Aldrop
₹970/piece
The 10" "Ophel" Black Antique Iron Aldrop is a wrought-iron door aldrop, also described as cast iron, in a black powder-coated finish for bedroom, kitchen and drawing-room doors. It is made to enhance the beauty of a home, and its name comes from the Bible, probably meaning fortified hill or risen area.
The plain black rod runs through three oval brackets, and a smooth curved hasp ends in a raised loop. It measures 254mm = 10 inch long and 148mm = 5.8 inch high, with a 16mm rod and 49mm hole to hole.
Supplied as one piece with matching screws, it is made in India with a 2 year warranty.
Catalogue code: SH-10"-OPH-ALDP-005-IR
14" "Ohel" Black Antique Iron Aldrop
₹1,789/piece
The 14" "Ohel" Black Antique Iron Aldrop is a wrought-iron door aldrop, also described as cast iron, in a black powder-coated finish for bedroom, kitchen and drawing-room doors. It is made to enhance the beauty of a home, and its name comes from the Bible, probably meaning fortified hill or risen area.
The rod, 356mm = 14 inch long, runs through three brackets, and the hasp carries an embossed floral pattern and a raised loop.
Supplied as one piece with matching screws, it is made in India with a 2 year warranty. Other finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-14"-OHE-ALDP-003-IR
12" "Ophel" Black Antique Iron Aldrop
₹1,455/piece
12" "Ophel" black antique iron aldrop: a smooth door bolt in Black Powder Coated finish for bedroom, kitchen and drawing room doors. Spanning 304mm = 12 inch, its 16mm thick rod runs through three guides on oval two-hole plates, and it stands 148mm = 5.8 inch tall.
It is listed as wrought iron and also described as cast iron. "Ophel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area; the design is meant to enhance the beauty of a home.
Supplied as one piece with matching screws, it is made in India with a 2 year warranty.
Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
Catalogue code: SH-12"-OPH-ALDP-001-IR
12" "Ohel" Brass Aldrop
₹3,265/piece
12" "Ohel" brass aldrop: a solid brass door bolt with a 12" rod of 16mm diameter, for bedroom, kitchen and drawing room doors. It measures 305mm = 12 inch across; the rod runs through three engraved guides, and the 125mm = 4.9 inch slotted hasp closes over a square staple plate.
"Ohel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area; the design is meant to enhance the beauty of a home.
Supplied as one piece with matching screws in Polished Lacquered (listed as Polish Lacquered), from a choice of finishes, with a 5 year warranty.
Catalogue code: SH-12"-OHE-ALDP-002-BR
14" "Ohel" Brass Aldrop
₹3,805/piece
14" "Ohel" brass aldrop: a solid brass door bolt with a 14" rod of 16mm diameter, for bedroom, kitchen and drawing room doors. It measures 356mm = 14 inch across; the rod runs through three engraved guides, and the 125mm = 4.9 inch slotted hasp closes over a square staple plate.
"Ohel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area; the design is meant to enhance the beauty of a home.
Supplied as one piece with matching screws in Polished Lacquered (listed as Polish Lacquered), from a choice of finishes, with a 5 year warranty.
Catalogue code: SH-14"-OHE-ALDP-003-BR
10" "Ohel" Brass Aldrop
₹2,125/piece
10" "Ohel" brass aldrop: a solid brass door bolt with a 10" rod of 13mm diameter, for bedroom, kitchen and drawing room doors. The rod runs through three guides, and the slotted hasp closes over a square staple plate.
"Ohel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area. Also described as a 12″ design, it is meant to enhance the beauty of a home.
The finish is Polished Lacquered (listed as Polish Lacquered), from a choice of finishes, with a floral-engraved hasp. Supplied as one piece with matching screws, it is made in India with a 5 year warranty.
Catalogue code: SH-10"-OHE-ALDP-001-BR
16" "Ohel" Black Antique Iron Aldrop
₹2,178/piece
The 16" "Ohel" Black Antique Iron Aldrop is a wrought-iron door aldrop, also described as cast iron, finished in black powder coat for bedroom, kitchen and drawing-room doors. It is made to enhance the beauty of a home; the name comes from the Bible, probably meaning fortified hill or risen area.
Its rod, 409 mm = 16 inch long, runs through three brackets, and the 4mm thick hasp carries an embossed floral pattern and a raised loop.
Supplied as one piece with matching screws, it is made in India with a 2 year warranty. Other finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-16"-OHE-ALDP-004-IR
16" "Ohel" Brass Aldrop
₹4,500/piece
16" "Ohel" brass aldrop: a solid brass door bolt with a 16" rod of 16mm diameter, for bedroom, kitchen and drawing room doors. It measures 406mm = 16 inch across; the rod runs through three engraved guides, and the 125mm = 4.9 inch slotted hasp closes over a square staple plate.
"Ohel" is a biblical name apparently given to a raised part of a settlement, probably meaning fortified hill or risen area. Also described as a 14" design, it is meant to enhance the beauty of a home.
Supplied as one piece with matching screws in Polished Lacquered (listed as Polish Lacquered), from a choice of finishes, with a 5 year warranty.
Catalogue code: listed as SH-14"-OHE-ALDP-003-BRSH-16"-OHE-ALDP-004-BR; the label reads SH-16"-OHE-ALDP-004-BR
Door Bolts22 products
3.5" Amaziah Brass Tower Bolt
₹1,465/piece
At 93mm x 75mm x 21mm, the 3.5" Amaziah Brass Tower Bolt is a solid-brass door tower bolt in a Polished Lacquered finish. Moved by its angled knob, the round bolt slides from a shaped six-hole backplate into a separate four-hole keeper, 20mm wide, to hold a door shut. The label printed with it names a 2 Inch "Amaziah" Brass Tower Bolt.
It comes as one piece with a matching screw, is made in India and carries a 5 year warranty. Other finishes are Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass and Satin Nickel.
Catalogue code: SH-3.5"-AMA-TBL-002-BR; the label reads SH-2Inch-AMA-TBL-001-BR
5" "Caiphas" Black Antique Iron Door Bolt
₹615/piece
5" "Caiphas" Black Antique Iron Door Bolt in wrought iron, a hammered-texture slide bolt with a curled handle that holds a door shut by sliding into its box keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated.
The overall size is listed as 5"; the printed label names it the 126mm "Caiphas" Iron Door Bolt, with 144mm overall length, a 126mm backplate and 43mm width.
Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-CAI-BLT-009-IR
"Barachias" Black Antique Iron Door Bolt
₹564/piece
"Barachias" Black Antique Iron Door Bolt made of wrought iron in a black powder-coated finish, for holding a door shut by sliding the bolt into its keeper.
The waisted backplate has a notched lower edge and a hammered texture, and carries four screw holes. The bolt runs through two guide straps and ends in a teardrop-shaped grip, and a separate two-hole keeper fixes to the frame.
Overall dimensions are 165mm x 42mm x 31mm: 165mm = 6.5 inch long and 42mm = 1.6 inch wide, and 180mm = 7.10 inch with the keeper. Hole-to-hole spacing is 31mm on the keeper, 143mm along the plate and 26mm across its lower end. Supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-BAR-BLT-006-IR
4" Abishur Iron Barrel Bolt
₹119/piece
4" Abishur Iron Barrel Bolt, a slide bolt that keeps a door shut by sliding its round bolt into a cranked keep. It is made of iron and comes as one piece with matching screws; the finish displayed is Black Powder Coated, with a silver-tone bolt and knob handle.
Backplate and keep each carry four screw holes. Overall dimensions are listed as 142mm x 62mm x 23mm; the printed size chart reads 94mm Length and 40mm Width, with 65mm hole to hole.
Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-ABI-BLT-005-IR
6 inch "Elishua" Black Antique Iron Door Bolt
₹578/piece
6 inch "Elishua" black antique iron door bolt in wrought iron with a black powder-coated finish. A sliding bolt with a round knob handle runs along a hammered-texture plate and shoots into a separate keeper to hold a door shut.
The plate carries four screw holes and the keeper two, and matching screws are the listed accessory. Overall dimensions are listed as 6". The marked drawings give 156mm = 6 inch for the plate and 176mm = 6.9 inch from keeper top to plate base, with 38mm across the keeper, a 20mm keeper, 46mm height, 4mm thickness, 30mm hole to hole on the keeper and 126mm hole to hole on the plate. Supplied as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-6"-ELI-BLT-015-IR
6.5 Inch "Abishur" Iron Barrel Bolt
₹255/piece
6.5 inch "Abishur" iron barrel bolt in black powder-coated iron. Its silver-tone bolt and knob handle slide in a black barrel fixed to a smooth flat plate, shooting into a separate keeper to hold a door shut.
Six screw holes sit on the plate and four on the keeper, and a notched slot near the base takes the handle; matching screws are the listed accessory. Overall dimensions are 6.5". Supplied as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-ABI-BLT-011-IR
5" Bedaiah Black Antique Iron Door Bolt
₹430/piece
5" Bedaiah Black Antique Iron Door Bolt in wrought iron, a slide bolt that secures a door by sliding its square bolt into an arched keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated.
The shaped backplate has a hammered texture, flared ends and four screw holes. Overall dimensions are 121mm x 40mm x 25mm; the backplate is 108mm long, and the keep is 29mm hole to hole.
Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-BAD-BLT-007-IR
24 inch "Elishua" Black Antique Iron Door Bolt
₹1,999/piece
The 24 inch "Elishua" Black Antique Iron Door Bolt is a long wrought iron bolt for securing a door, listed at 24" overall. It is supplied as one piece in a black powder coated finish with matching screw, made in India and backed by a 2 year warranty.
The narrow textured plate carries paired screw holes along its length, with a round knob handle at the foot of the bolt and a separate keep at the top. Marked sizes are 610mm = 24 inch long, 41mm = 1.6 inch wide, 55mm height and 5mm thickness, with holes 30mm, 189mm and 567mm apart. The label also marks 509mm = 24 inch, 24mm and 21mm.
Catalogue code: SH-24"-ELI-BLT-017-IR
8" Bedan Black Antique Iron Door Bolt
₹765/piece
8" Bedan Black Antique Iron Door Bolt in wrought iron with a black powder-coated finish, made for holding a door shut with a sliding bolt and keeper.
Its hammered-texture backplate has rounded lobes at the lower end and six screw holes. The bolt slides through two guide straps and turns down into a T-shaped toe grip, and a separate arched keeper with three screw holes fixes to the frame.
Overall dimensions are 198mm x 52mm x 30mm, with 182mm for the plate and a 20mm height at the upper strap. Hole-to-hole spacing is 38mm on the keeper, 68mm and 151mm along the plate, and 33mm across its lower end. Supplied as one piece with matching screw, made in India, with a 2 year warranty.
Catalogue code: SH-BED-BLT-008-IR
4.5" "Dibzahab" Black Antique Iron Door Bolt
₹335/piece
4.5" "Dibzahab" Black Antique Iron Door Bolt in wrought iron, a slide bolt with a round knob handle and a hammered texture that holds a door shut by sliding into its two-hole keep. It comes as one piece with matching screws and is finished in Black Powder Coated, the finish available.
The overall size is listed as 4.5"; the printed label names it 4" "Dibzahab" and marks 116mm = 4.5 inch overall, a 104mm = 4 inch backplate, 37mm = 1.4 inch width and 76mm Hole to Hole.
Made in India, with a 2 year warranty.
Catalogue code: SH-DIB-BLT-013-IR
12" "Elishua" Brass Tower Bolt
₹2,467/piece
The 12" "Elishua" brass tower bolt is a long solid brass barrel bolt for securing a door, with an L-shaped handle ending in a round knob that slides the bolt up into the keeper at its top end. Its rustic, textured surface carries a bright gold-tone Polished Lacquered finish, and the narrow backplate is drilled for screws along its length. Supplied as one piece with matching screws, made in India, with a 5 year warranty.
Available finish: Polish Lacquered
Catalogue code: SH-12"-ELI-BLT-003-IR
6" "Abraam" Black Antique Iron Door Bolt
₹675/piece
The 6" "Abraam" black antique iron door bolt is a wrought iron slide bolt with a curled ring handle at its foot, made to hold a door shut by sliding the square bolt into its keeper. Overall dimensions are 152mm x 36mm x 37mm.
The narrow backplate has a textured black surface in a Black Powder Coated finish and four screw holes set 135mm Hole To Hole, while the keeper's two holes sit 22mm apart. With the keeper in place the bolt reaches 155mm = 6.10 inch. Supplied as one piece with matching screws, made in India, with a 2 year warranty.
Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
Catalogue code: SH-ABR-BLT-001-IR
6" Abraham Black Antique Iron Necked Bolt
₹675/piece
The 6" Abraham Black Antique Iron Necked Bolt is a wrought-iron door bolt in a black powder-coated finish, measuring 6" overall. Its flat bar runs through two guides on a textured, hammered-look backplate, with a round knob at one end and a cranked neck at the other that slides into a separate square keeper to hold a door closed. The backplate has six screw holes and the keeper two.
It comes as one piece with a matching screw, is made in India and carries a 2 year warranty. Other finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-ABR-BLT-002-IR
4" Adrian Antique Iron Door Bolt
₹336/piece
4" Adrian Antique Iron Door Bolt in wrought iron, a slide bolt that holds a door shut by sliding into its keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated.
The hammered backplate carries a raised scroll pattern, with a ring-shaped pull at its base, four screw holes and a separate two-hole keep. Overall dimensions are 102mm x 30mm x 32mm; the backplate is 87mm long, with 72mm hole to hole.
Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-ADR-BLT-003-IR
12 inch "Elishua" Black Antique Iron Door Bolt
₹1,072/piece
12 inch "Elishua" black antique iron door bolt, made of wrought iron and finished in black powder coat. Its long, hammered-texture plate guides a sliding bolt with a round knob handle into a separate keeper, holding a door shut.
Pairs of screw holes run along the plate, the keeper takes two screws, and matching screws are the listed accessory. Overall dimensions are 12". Supplied as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-12"-ELI-BLT-016-IR
5 Inch "Abishur" Iron Barrel Bolt
₹213/piece
5 inch "Abishur" iron barrel bolt with a black powder-coated finish. A bright silver-tone bolt with a knob handle slides through a black barrel on a flat, smooth plate and shoots into a separate keeper to hold a door shut.
The plate has six screw holes and the keeper four, with a notched slot for the handle near the base; matching screws are the listed accessory. Overall dimensions are 5". Supplied as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-ABI-BLT-010-IR
"Achzib" Decorative Brass Door Bolt
₹765/piece
The "Achzib" decorative brass door bolt is a solid brass slide bolt in an Antique Copper finish, made to hold a door shut. Its rectangular backplate has a textured, antique-look surface with six screw holes, the square bolt runs through two guide straps with raised decorative motifs, and a curled ring handle at the foot slides it into the two-hole keeper at the top. Supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-ACH-DBL-001-BR
8 inch "Elishua" Black Antique Iron Door Bolt
₹772/piece
The 8 inch "Elishua" door bolt is a black, antique-style wrought iron bolt that slides into its keep to hold a door shut, with an overall length of 8". Its Black Powder Coated finish covers a textured, hammered-look surface.
A long flat backplate with a raised central channel carries the sliding bolt, which ends in a round knob. Screw holes run along both edges of the backplate and the separate keep. Made of wrought iron in India, it is supplied as one piece with matching screws and carries a 2 year warranty.
Catalogue code: SH-8"-ELI-BLT-018-IR
2" Amaziah Brass Tower Bolt
₹1,065/piece
The 2" Amaziah Brass Tower Bolt is a solid-brass door tower bolt in a Polished Lacquered finish, measuring 56mm x 46mm x 14mm overall. A round bolt slides along a shaped backplate with six countersunk screw holes and, moved by its angled knob, enters a separate keeper plate to hold a door shut. The keeper is 12mm wide with holes 44mm = 1.7 inch apart.
It comes as one piece with a matching screw, is made in India and carries a 5 year warranty. Other finishes are Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass and Satin Nickel.
Catalogue code: SH-2 inch-AMA-TBL-001-BR; the label reads SH-2Inch-AMA-TBL-001-BR
"Cappadocia" Black Antique Iron Door Bolt
₹655/piece
"Cappadocia" Black Antique Iron Door Bolt, a long wrought iron slide bolt for securing a door, with a curled hook-shaped handle and a box keep. It comes as one piece with matching screws and is finished in Black Powder Coated, the finish available.
Overall dimensions are 163mm x 38mm x 47mm, or 6.4 inch long by 1.4 inch wide. The narrow backplate, 143mm = 5.6 inch long, carries raised scroll lines, with 140mm and 120mm Hole to Hole spacing.
Made in India, with a 2 year warranty.
Catalogue code: SH-CAP-BLT-012-IR
Showing 20 of 22 in Door Bolts
Show 2 moreDoor Knocker92 products
"Owl Fly" Decorative Iron Door Knocker
₹895/piece
The "Owl Fly" Decorative Iron Door Knocker is a wrought iron door knocker in the form of an owl with spread wings, with a scrolled drop knocker hanging from its talons. The finish displayed is Antique Brass, with darker shading in the feathers; Antique Copper and Black Powder Coated are also offered.
It is supplied as one piece with matching screws and mounts through three screw holes, one in each wing and one in the lower plate. The wing holes sit 111mm (4.3 inch) apart, with 86mm (3.3 inch) down to the lower hole. Overall dimensions are 178mm (7 inch) x 139mm (5.4 inch) x 20mm. Made in India, it carries a 2 year warranty.
Catalogue code: SH-OWL-DKN-016-IR
"Butterfly" Black Antique Iron Door Knocker
₹867/piece
The "Butterfly" door knocker is a black antique cast iron knocker shaped as a butterfly, for a main door, gate or interior door, measuring 145mm x 114mm x 46mm overall. The butterfly swings from a hinged top bar and taps with a curved tip below; its wings carry finely detailed vein and dotted patterns.
It is handmade from cast iron and finished in black powder coating, an anti-rust finish that makes it a sturdy, long-lasting knocker for indoor and outdoor use, on front doors, gates and entrance, office, living room, study and bedroom doors. It comes with a 100% customer satisfaction guarantee.
Besides Black Powder Coated, it is offered in Natural Iron Lacquered, Natural Iron Unlacquered, Matt Buff Lacquered and Natural Rust Lacquered. The back plate is 123mm (4.8 inch) long with 2 screw holes on the back side, 74mm hole to hole, and matching screws are included. The wings span 105mm (4.1 inch) in height, the top bar is 25mm wide and the striker tip 8mm.
Catalogue code: SH-BUT-DKN-033-IR
"Horse" Black Antique Iron Door Knocker
₹1,295/piece
Shaped as a slender horse's head, the "Horse" Black Antique Iron Door Knocker is a wrought iron knocker for front and entrance doors. A textured forelock rises between two upright ears, and the long face carries eyes and a nose, finished in black powder coat.
It is supplied as one piece with a matching screw. Overall dimensions are 135mm x 72mm x 57mm, about 5.3 inch tall and 2.8 inch wide. Made in India, it comes with a 2 year warranty.
Catalogue code: SH-HOR-DKN-018-IR
"Dragonfly" Decorative Iron Door Knocker
₹727/piece
The "Dragonfly" Decorative Iron Door Knocker, also written "Dragon Fly", is a handmade door knocker cast from wrought iron in an Antique Brass finish. Its long segmented body hangs from a small leaf-shaped top mount, with four veined wings spread wide and a round strike button set below the tail.
It is made as a decorative accent for the main door or gate of a house, and it suits entrance, bedroom or office doors as well, both indoors and outdoors. Its simple structure fits exterior or interior decoration such as living rooms, study rooms and bedrooms. Crafted to be sturdy and long lasting, it is highly detailed and styled for both traditional and contemporary settings, with an exclusive Antique Brass finish made to last for many years. Material is listed as wrought iron with an Antique Brass finish; the knocker is also described as solid brass with a Satin Nickel finish.
Overall dimensions are 120mm x 155mm x 26mm, about 4.7 inch by 6.1 inch. The round strike button measures 33mm across and 14mm in height. The back plate has 2 screw holes, and the pack holds 1 piece and 2 matching screws.
Catalogue code: SH-DGF-DKN-002-IR
"Large Owl" Brass Door Knocker
₹1,589/piece
"Large Owl" Brass Door Knocker in a silver Matt Chrome finish: a cast solid brass owl perched on a branch, made for a front door, main gate or interior door.
The owl is modelled in full relief, with textured feathers, large patterned eyes and a carved branch under its feet. It is handmade from cast solid brass and works both indoors and outdoors, on an entrance, bedroom, study, living room or office door. The finish is made to last for many years and adds an antique look to a front door. The styling suits both traditional and contemporary interiors, and it comes with a 100% customer satisfaction guarantee.
Overall dimensions are listed as 132mm 78mm x 52mm. The back plate has 2 screw holes, hole to hole, and the pack holds 1 piece and 4 matching screws.
Available finishes: Matt Chrome, Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Black Powder Coated, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass, Satin Nickel
Catalogue code: SH-OWL-DKN-012-BR
"Squirrel" Decorative Iron Door Knocker
₹929/piece
The "Squirrel" Decorative Iron Door Knocker is a wrought iron door knocker shaped as a crouching squirrel, in an Antique Brass finish, catalogue code SH-SQU-DKN-013-IR.
The squirrel stretches along an oval back plate, with a curled, finely grooved bushy tail and dark shading across the brass tone. Two fixing holes sit 26mm Hole to Hole in the base, and it is supplied as one piece with matching screws.
Overall dimensions are 155mm x 51mm x 63mm (155mm = 6.1 inch long, 51mm = 2 inch wide, 63mm Height). It is made in India, carries a 2 year warranty and is also offered in Antique Copper and Black Powder Coated.
Catalogue code: SH-SQU-DKN-013-IR
"Jasher" Black Antique Iron Door Knocker
₹896/piece
The "Jasher" black antique iron door knocker is a round ring knocker in wrought iron for a front door or entrance. Its hammered-texture ring hangs from a round textured backplate, carries a ribbed collar at its base, and swings onto a separate round striker plate.
The finish is Black Powder Coated, and it comes as One Piece with a Matching Screw. Overall dimensions are 120mm x 101mm x 40mm (4.7 inch tall, 3.9 inch wide, 40mm Height at the mount). The ring opening measures 74mm, and the striker is 49.7mm across with 17mm Height. It is made in India and carries a 2 year warranty.
Catalogue code: SH-JAS-DKN-008-IR
"Fox" Decorative Brass Door Knocker
₹3,760/piece
The "Fox" decorative brass door knocker is a fox-head front-door knocker made of solid brass in an Antique Brass finish. It is supplied as one piece with matching screws.
The fox's head, with pointed ears and a detailed face, is the knocker itself: it lifts on a hinge and drops onto a small strike stud. Above it rises a long, finely grooved pointed plate, and two grooved legs run below, with screw holes in the top plate and beside the head for fixing. The dark antique tone sets off the raised detail. Made in India, with a 5 year warranty.
Catalogue code: SH-FOX-DKN-023-BR
"Key" Black Antique Iron Door Knocker
₹765/piece
Shaped like an old skeleton key, the "Key" black antique iron door knocker is made of wrought iron for a front door or entrance. The key, with an oval bow, a turned and ringed shank and a square bit, is mounted on a long backplate with a spear-point top and two screw holes.
It has a Black Powder Coated finish and is supplied as One Piece with a Matching Screw. Overall dimensions are 198mm x 58mm x 40mm (7.7 inch long). Marked sizes show 55mm across the bow, 58mm across the bit, 40mm Height, and 60mm between the two screw holes. It is made in India and carries a 2 year warranty.
Catalogue code: SH-KEY-DKN-010-IR
"Bee Ring" Black Antique Iron Door Knocker
₹998/piece
"Bee Ring" Black Antique Iron Door Knocker in wrought iron: a round knocker ring hung from a round back plate, with a textured bee with spread wings at its base, in a Black Powder Coated finish for front doors.
It is supplied as one piece with a matching screw and measures 140mm x 110mm x 33mm overall (5.5 inch tall, 4.3 inch wide); the bee itself is 60mm = 2.3 inch tall. The back plate has screw holes, and the knocker fixes with a threaded bolt and strikes a round button. Made in India, it carries a 2 year warranty.
Catalogue code: SH-BER-DKN-025-IR
"Segub" Black Antique Iron Door Knocker
₹1,875/piece
"Segub" black antique iron door knocker with a teardrop-shaped loop, made of cast iron in a black powder-coated finish, 198mm x 102mm x 24mm overall (198mm = 7.8 inch long, 102mm = 4 inch wide, 24mm Thickness). The loop has a heavily textured, scale-like surface and hangs from a round backplate with a fixing hole. Below it sits a round strike button, 46mm across, with matching texture, where the loop lands.
It is supplied as one piece with matching screws, made in India, and comes with a 2 year warranty.
Catalogue code: SH-SEG-DKN-030-IR
"Geshur" Black Antique Iron Door Knocker
₹845/piece
The "Geshur" Black Antique Iron Door Knocker is a wrought iron door knocker cast as a foliate face with a leafy mane, with a stirrup-shaped knocker bar hinged under the chin that falls onto a round strike stud. Fixed to a front door, it is lifted and dropped to announce a visitor.
It is supplied as one piece in a black powder coated finish with matching screws, made in India and backed by a 2 year warranty. The fittings are three threaded bolts and the strike stud. Overall dimensions are 203mm x 117mm x 64mm, that is 8 inch tall and 4.6 inch wide. The knocker bar spans 114mm = 4.4 inch, and the strike stud is marked 45mm and 16mm.
Catalogue code: SH-GES-DKN-026-IR
"Large Lion" Decorative Brass Door Knocker
₹2,150/piece
The "Large Lion" decorative brass door knocker is a cast solid brass lion-head knocker in an antique copper finish for a front door, main gate, entrance, bedroom or office door. A detailed lion face sits inside a round wreath ring wrapped with crossed bands, with a flower rosette at the top and a second one at the base, all set on a round back plate.
Handmade in solid brass, it is made for indoor and outdoor use and for a sturdy, long-lasting knocker that suits traditional and contemporary doors and interior or exterior settings such as living rooms, study rooms and bedrooms. The colour is listed as Brown and the finish as Antique Copper, while the finish on offer is listed as Antique Brass.
It measures 153mm x 134mm x 43mm overall (6 x 5.2 inch), with 4 screw holes in the back plate, and comes as a pack of 1 piece and 4 screws, with matching screws. To fit it, mark the height, drill straight through the door at the mark, hold the knocker against the outside and fix it with the screws provided. It carries a 100% customer satisfaction guarantee.
Catalogue code: SH-LLO-DKN-007-BR
Available finishes: Antique Brass
"Bethemek" Black Antique Iron Door Knocker
₹956/piece
"Bethemek" black antique cast iron door knocker with an anti-rust black powder-coated finish, made for a main door, a gate or any door in the home. Its fluted drop knocker carries leaf and scroll casting under a shell-like crest, in a simple design that sits well in both traditional and contemporary settings.
The knocker is handmade from cast iron, and the rust-resistant black powder coat adds to its strength and look and keeps it lasting for many years. That makes it sturdy and durable, and it can be used both indoors and outdoors. It works as a decorative accent on a front door or entrance, or on bedroom, study, living room or office doors.
The overall dimensions are listed as 175mm x 101mm x 40mm. The size label reads 190mm = 7 inch tall and 134mm = 5.2 inch wide, with a 47mm Height. On the back side are 2 screw holes, 119mm = 4.6 inch apart. The pack includes 1 piece and 2 pin tops, with matching screws. The colour is black. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It comes with a 100% customer satisfaction guarantee.
Catalogue code: SH-BET-DKN-028-IR
"Owl Ring" Decorative Iron Door Knocker
₹1,267/piece
"Owl Ring" Decorative Iron Door Knocker in wrought iron, shaped as a perched owl with a round knocker ring below its feet and a round strike button, for front doors. The owl's eyes and leaf-like feathers are finely textured in an Antique Brass finish.
It is supplied as one piece with matching screws. Overall dimensions are 230mm x 92mm x 32mm (9 inch long); the owl body is 78mm wide and the 92mm measure spans the ring. The fixing holes sit 174mm = 6.8 inch apart, and the strike button is 26mm across. Antique Brass is the available finish. Made in India, it carries a 2 year warranty.
Catalogue code: SH-OWR-DKN-022-IR
"Hand" Brass Door Knocker
₹635/piece
The "Hand" Brass Door Knocker is a solid brass door knocker with a hinged hand-shaped striker and ribbed cuff, set on a shaped backplate that fixes through two screw holes. It is supplied as one piece with matching screw, measures 125mm x 48mm x 42mm, is made in India and carries a 5 year warranty.
The finish displayed is Polished Lacquered, a bright warm golden polish. It is also offered as Polish Lacquered, Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass, Satin Nickel and Zinc Plated. Marked sizes add 110mm = 4.3 inch hole to hole and a 4mm plate height.
Catalogue code: SH-HAN-DKN-004-BR
"Semachiah" Black Antique Iron Door Knocker
₹865/piece
"Semachiah" black antique iron ring door knocker, made of cast iron in a black powder-coated finish, 146mm x 122mm x 29mm overall (146 mm = 5.7 inch high, 122mm = 4.8 inch wide, 29mm Height). A shell-shaped crest tops a scrolled backplate with two screw holes. The plate holds a hinged ring of two textured, curving arms that meet at a central boss. Below it sits a round strike button, 45 mm across and 16mm high.
It is supplied as one piece with matching screws, made in India, and comes with a 2 year warranty. Finishes: Black Powder Coated, Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered.
Catalogue code: SH-SEM-DKN-031-IR
"Abasalom" Heavy Duty Black Antique Iron Door Knocker
₹2,165/piece
The "Abasalom" heavy duty door knocker is a black antique cast iron ring knocker for a main door, gate or interior door, measuring 268mm x 141mm x 22mm overall. A thick, hand-textured ring hangs from a pointed fleur-de-lis style top mount and strikes a matching cross-shaped plate below.
It is handmade from cast iron and finished in black powder coating, an anti-rust finish that makes it a sturdy, long-lasting knocker for indoor and outdoor use. It suits front doors, gates and entrance, office, living room, study and bedroom doors, and comes with a 100% customer satisfaction guarantee.
The ring measures 144mm (5.6 in), the top mount 80mm by 64mm, and the strike plate 71mm with a 14mm height. It fixes through 3 screw holes on the back side, with matching screws. Package includes: Pack of 1 Pieces and 3 Pin Top.
Catalogue code: SH-ABA-HVY-DKN-032-IR (the label reads SH-ABA-HVY-DKN-025-IR)
"Dove" Black Antique Iron Door Knocker
₹1,056/piece
"Dove" black antique iron door knocker, cast in the form of a bird perched on a slim mounting plate, made of cast iron with a black powder-coated finish. Feather lines run down the wings, the fan-shaped tail is ribbed, and the head has a carved eye and a pointed beak. The plate has a screw hole at the top and bottom for fixing with the matching screws. It is also labelled "Small Woodpecker" Black Antique Iron Door Knocker.
The overall size is 152mm x 56mm x 66mm. It is supplied as one piece in Black Powder Coated, made in India, and comes with a 2 year warranty.
Catalogue code: SH-DOV-DKN-029-IR; label code SH-SMA-WPKR-DKN-029-IR
"Small Dear" Decorative Iron Door Knocker
₹1,255/piece
A stag head with branching antlers tops the "Small Dear" Decorative Iron Door Knocker, a wrought iron deer door knocker with a ring knocker hanging below the head and a round strike button beneath the ring. The finish displayed is Antique Brass; Black Powder Coated and Antique Copper are also offered.
The head plate mounts through three screw holes: two set 40mm (1.5 inch) apart and a third 18mm (0.7 inch) lower. The ring is 108mm (4.2 inch) wide with a 96mm (3.7 inch) drop, and overall dimensions are 172mm (6.7 inch) x 174mm (6.8 inch) x 75mm. It is supplied as one piece with matching screws, is made in India and carries a 2 year warranty.
Catalogue code: SH-SMA-DEA-DKN-019-IR
Showing 20 of 92 in Door Knocker
Show 20 moreDoor Handles20 products
"Pekahiah" Black Iron Door Handle With Plate
₹975/piece
The "Pekahiah" black iron door handle with plate is a wrought iron lever handle on a back plate, supplied as one pair with spindle and screws.
Each scrolled lever sits on a hammered-texture back plate with a fleur-de-lis top, a keyhole cut-out and fixing holes at both ends, all in black powder coated finish.
The back plate measures 170mm x 48mm x 4mm and the handle 105mm x 36mm x 56mm, with an overall width of 121mm. Fixing holes sit 32mm apart across the top, 31mm across the bottom, and 130mm and 131mm top to bottom; the keyhole is 22mm. Made in India, with a 2 year warranty.
Catalogue code: SH-PEK-HNDP-009-IR
"Philip" Black Iron Door Handle With Plate
₹1,278/piece
The "Philip" black iron door handle with plate is a pair of wrought iron lever handles on rectangular back plates with wavy top and bottom edges, used to open and close a door latch. Each plate has a hammered-texture surface, four screw holes and a round rose carrying a scroll lever with a rounded end, all in a black powder coated finish.
The back plate measures 154mm x 54mm x 4mm and the handle 100mm x 60mm. The set is supplied as one pair with spindle and screws. It is made in India and comes with a 2 year warranty.
Catalogue code: SH-PHI-HNDP-008-IR
"Abiathar" Zinc Door Handle with SS Plate
₹735/piece
The "Abiathar" Zinc Door Handle with SS Plate is a flat-lever handle set for doors, made of an SS plate and a zinc handle in a Satin Nickel finish. It comes as one pair, with matching screws.
The lever is a broad, flat bar with a rounded tip that folds back into a rounded collar where it meets the plate. It is set on a long back plate with rounded ends, with a keyhole cut-out below the lever, round at the top with a long slot beneath, and four countersunk screw holes, two at each end. Made in India, it carries a 2 year warranty.
Catalogue code: SH-ABI-HNDP-002-SS
Gath SS Door Handle with SS Plate
₹789/piece
The Gath SS Door Handle with SS Plate is a lever handle set for doors in a Satin Nickel finish, made of an SS plate and a zinc handle. It is supplied as one pair, with matching screws.
The lever has a softly curved, rounded grip and sits on a tall back plate with rounded ends. A keyhole cut-out sits below the lever, and four screw holes, two at each end, fix the plate to the door. Made in India, it carries a 2 year warranty.
Catalogue code: SH-GAT-HNDP-013-SS
"Salathiel" Black Antique Iron Door Handle With Plate
₹1,372/piece
"Salathiel" black antique iron door handle with plate: a pair of wrought iron lever handles in a black powder-coated finish on short back plates. Each plate has a fleur-de-lis top, a rounded three-lobed foot and an all-over hammered texture, and fixes with four screw holes, two at each end. The smooth lever sweeps out from a teardrop rose into a wide curl with a flicked tail.
The back plate measures 169mm x 49mm x 5mm and the handle 121mm x 55mm x 56mm, with a 137mm overall width. The fixing holes sit 32 hole to hole across, and 129 and 130 hole to hole lengthwise. Matching screws come with the pair. Made in India, with a 2 year warranty.
Catalogue code: SH-SAL-HNDP-015-IR
"Abishalom" Zinc Door Handle with SS Plate
₹912/piece
The "Abishalom" Zinc Door Handle with SS Plate is a Satin Nickel lever handle set for doors, with a 178mm x 110mm back plate and a 102mm x 18mm handle, made of an SS plate and a zinc handle. It comes as one pair, with matching screws.
The rounded lever runs straight out from the plate and measures 102mm (4 inch) long with a 45mm height. The back plate, 178mm (7 inch) tall and 110mm (4.3 inch) across, has a raised border, a 22mm (Ky) keyhole below the lever and a pair of screw holes at each end, spaced 13mm hole to hole across and 143mm hole to hole from top to bottom. Made in India, it carries a 2 year warranty.
Catalogue code: SH-ABI-HNDP-003-SS
"Sepharad" Black Iron Door Handle With Plate
₹1,178/piece
"Sepharad" black iron door handle with plate: a pair of wrought iron scroll-lever handles on tall back plates, black powder coated. Fleur-de-lis points finish both ends of each plate, which has a raised beaded border, a diagonal panel pattern, a screw hole at top and bottom and a keyhole cut-out. The lever rises from a patterned rose and ends in a tight scroll.
The back plate measures 251mm x 43mm x 5mm and the handle 127mm x 35mm x 61mm, with a 134mm overall width, a 35mm keyhole and 211mm hole to hole. Spindle and screws are included. Made in India, with a 2 year warranty.
Catalogue code: SH-SHE-HNDP-016-IR
"Abiezer" SS Door Handle with SS Plate
₹915/piece
"Abiezer" SS door handle with SS plate: a pair of satin nickel lever handles that pair an SS back plate with a zinc handle. The plain rectangular plate has softly rounded corners, two screw holes at each end and a cylindrical key hole, and the lever is straight with squared edges.
The plate is 203mm = 8 inch long and 49mm = 1.9 inch wide, with a 109mm = 4.2 inch handle, a 34mm cylindrical key hole, 179mm hole to hole lengthwise and 26mm hole to hole across. Matching screws come with the pair. Made in India, with a 2 year warranty.
Catalogue code: SH-ABI-HNDP-001-SS
"Amos" Black Iron Door Handle With Plate
₹997/piece
"Amos" Black Iron Door Handle With Plate is a pair of wrought iron lever handles on backplates in Black Powder Coated finish, for operating a door latch. Each rectangular backplate has a hammered texture, wavy top and bottom edges and four screw holes, and the two handles are mirrored for both sides of the door.
The handles are also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, the pair carries a 2 year warranty and comes with matching screws.
Backplate dimensions are 110mm x 49mm x 4mm, with screw holes 32mm and 83mm hole to hole. Handle dimensions are 93mm x 105mm x 65mm, and the lever projects 3.6 inch.
Catalogue code: SH-AMO-HNDP-001-IR
"Bahurim" Black Iron Door Handle With Plate
₹1,147/piece
"Bahurim" Black Iron Door Handle With Plate: a pair of wrought iron lever handles, each on a rectangular back plate with a keyhole, in a Black Powder Coated finish for doors.
It is supplied as one pair with matching screws and spindle. Each back plate is listed as 131mm x 40mm x 10mm, and its depth is also given as 8mm Height. The handle measures 102mm x 18mm x 58mm, reaching 4 inch from the plate. The keyhole is 23mm, and the four fixing holes on each plate sit 25mm = 0.9 inch apart across and 116mm = 4.5 inch apart top to bottom. Made in India, it carries a 2 year warranty.
Catalogue code: SH-BAH-HNDP-003-IR
"Rehob" Black Iron Door Handle With Plate
₹1,243/piece
"Rehob" black iron door handle with plate: a pair of straight-lever wrought iron handles on narrow rectangular back plates, finished in black powder coat. The plates end in V-notched points top and bottom, with a hammered texture, a screw hole at each end and a keyhole cut-out below the lever. The flat lever flares toward its tip and carries an embossed dash pattern, with a cross motif at the rose.
The back plate measures 258mm x 46mm x 34mm and the handle 126mm x 28mm. The set spans 132mm in width, with a 56mm height, a 34mm keyhole and 216mm hole to hole. Spindle and screws are included. Made in India, with a 2 year warranty.
Catalogue code: SH-REH-HNDP-014-IR
"Cyrus" Black Iron Door Handle With Plate
₹1,338/piece
"Cyrus" Black Iron Door Handle With Plate pairs a scrolled lever with a long hammered-texture backplate that ends in fleur-de-lis style points at top and bottom. It is made of wrought iron in a black powder coated finish, and each pointed end of the plate carries two screw holes.
The back plate measures 196mm x 53mm x 3mm, and the handle 92mm x 53mm x 50mm, with a 92mm lever and 50mm height. Fixing holes are 31mm apart across and 140mm apart from top to bottom.
Supplied as one pair with matching screws. Made in India, with a 2 year warranty.
Catalogue code: SH-CYR-HNDP-004-IR
"Rahab" Black Iron Door Handle With Plate
₹1,185/piece
"Rahab" black iron door handle with plate: a pair of wrought iron lever handles on long back plates in a black powder-coated finish. Each back plate rises to a pointed, flared crest and has an ornate rosette at the lever's base, a beaded collar, a hammered-texture lower section with a keyhole cut-out, and a screw hole at each end. The lever has a leaf-textured top and curls into an open scroll.
The back plate measures 247mm x 52mm x 5mm and the handle 118mm x 47mm x 60mm, with an overall width of 134mm, a 36mm keyhole and 218mm hole to hole. Spindle and screws come with the pair. Made in India, with a 2 year warranty.
Catalogue code: SH-RAH-HNDP-013-IR
"Azmon" Black Iron Door Handle With Plate
₹1,897/piece
"Azmon" Black Iron Door Handle With Plate is a pair of wrought iron lever handles on long keyhole backplates in Black Powder Coated finish, for a door with a keyed lock. Each ornate backplate has trefoil cut-outs, curled ends at the top and bottom, a hammered texture and a 20mm keyhole below the curved lever, and the two handles are mirrored for both sides of the door.
Made in India, the pair carries a 2 year warranty and comes with matching screws.
Back plate dimensions are 235mm x 49mm x 4mm and handle dimensions 98mm x 112mm x 56mm, with a handle that measures 27mm at the tip. Screw holes are spaced 145mm, 72mm and 30mm hole to hole.
Catalogue code: SH-AZM-HNDP-002-IR
"Eunice" Black Iron Door Handle With Plate
₹1,389/piece
"Eunice" Black Iron Door Handle With Plate sets a grooved lever on a narrow hammered-texture backplate with wavy top and bottom edges. It is made of wrought iron in a black powder coated finish, with two screw holes at each end of the plate.
The back plate measures 152mm x 40mm x 5mm, and the handle 97mm x 18mm x 60mm, with a 97mm lever and 60mm height; plate and lever together span 108mm in width. Fixing holes are 23mm apart across and 124mm apart from top to bottom.
Supplied as one pair with matching screws. Made in India, with a 2 year warranty.
Catalogue code: SH-EUN-HNDP-005-IR
"Raguel" Black Iron Door Handle With Plate
₹977/piece
The "Raguel" black iron door handle with plate pairs a scrolled lever with a tall back plate tipped in fleur-de-lis at both ends. Made of wrought iron in black powder coated finish, it is supplied as one pair with spindle and screws.
The hammered-texture plate has a keyhole cut-out and two fixing holes at each end. It measures 196mm x 54mm x 4mm, and the handle 88mm x 25mm x 54mm, with an overall width of 102mm. Fixing holes sit 31mm apart across the top, 32mm across the bottom, and 141mm and 140mm top to bottom; the keyhole is 21mm. Made in India, with a 2 year warranty.
Catalogue code: SH-RAG-HNDP-012-IR
"Pethahiah" Black Iron Door Handle With Plate
₹1,342/piece
The "Pethahiah" black iron door handle with plate is a pair of wrought iron lever handles on long back plates with fleur-de-lis shapes at both ends and a keyhole below the lever, for use with a door lock. Each scroll lever turns on a round rose set on a hammered-texture plate, finished in black powder coat.
The back plate measures 198mm x 53mm x 5mm (7.8 inch long) and the handle 103mm x 22mm x 57mm (4.0 inch). The overall width is 114mm = 4.4 inch, the fixing holes are 127mm = 5 inch apart from top to bottom, and the keyhole is 21mm = 0.8 inch. The set is supplied as one pair with spindle and screws, made in India, with a 2 year warranty.
Catalogue code: SH-PET-HNDP-010-IR
"Nicodemus" Black Iron Door Handle With Plate
₹955/piece
"Nicodemus" Black Iron Door Handle With Plate is a short-plate lever door handle: a straight wrought iron lever on a compact rectangular backplate with a screw hole in each corner, in a black powder coated finish.
The plate is 80mm long and 44mm wide, with an 8mm height marked at the plate. The lever reaches 101mm = 3.9 inch, with 59mm height. Hole spacing is marked as 25mm = 0.9 inch across and 116mm = 4.5 inch down.
Supplied as one pair with matching screws. Made in India, with a 2 year warranty.
Catalogue code: SH-NIC-HNDP-007-IR
"Rachab" Black Iron Door Handle With Plate
₹1,247/piece
The "Rachab" black iron door handle with plate is a pair of wrought iron lever handles with straight, square-section levers on plain rectangular back plates, used to open and close a door latch. Each lever rises from a faceted, pyramid-shaped boss, and each plate has four corner screw holes, all in a black powder coated finish.
The back plate measures 151mm x 40mm x 7mm and the handle 127mm x 23mm x 52mm, with an overall width of 134mm. The fixing holes are 26mm apart across the top and bottom and 136mm apart from top to bottom. The set is supplied as one pair with spindle and screws, made in India, with a 2 year warranty.
Catalogue code: SH-RAC-HNDP-011-IR
"Gabriela" Black Iron Door Handle With Plate
₹1,678/piece
"Gabriela" Black Iron Door Handle With Plate combines a scrolled lever with a curled tip and a rectangular keyhole backplate edged with a rope-twist border. It is made of wrought iron in a black powder coated finish, with two screw holes at each end of the plate.
The back plate measures 154mm x 53mm x 8mm, and the handle 98mm x 18mm x 65mm, with a 98mm = 3.8 inch lever and 65mm height. Fixing holes are 23mm = 0.9 inch apart across and 123mm = 4.8 inch apart down the plate, and the key hole is 19mm.
Supplied as one pair with matching screws. Made in India, with a 2 year warranty.
Catalogue code: SH-GAB-HNDP-006-IR
Door Pulls70 products
"Accho" Black Antique Iron Door Pull
₹678/piece
The "Accho" Black Antique Iron Door Pull is a cast iron door and cabinet pull with clover-shaped end plates, each drilled with three screw holes, six in all. Its curved grip has a granular cast texture with banded detail near each end, and it is supplied as one piece with matching screws.
Overall dimensions are 226mm x 49mm x 49mm; the size label reads 226mm = 8.8 inch long, 49mm wide and 49mm height, with the screw holes marked 118mm = 4.6 inch apart. The finish is listed as Black Powder Coated, the one finish offered, while the pull itself looks dark brown. Made in India, with a 2 year warranty.
Catalogue code: SH-ACC-DOP-032-IR
"Ahlab" Brass Cabinet Pull
₹305/piece
Compact and gently bowed, the "Ahlab" Brass Cabinet Pull is a solid brass pull handle for cabinets in a Polished Lacquered finish. Its slim grip joins two rounded, teardrop-shaped end plates, each with a single countersunk screw hole, and the polished surface has a bright gold tone.
The pull is offered in Polish Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-AHL-DOP-002-BR
"Amoke" Black Antique Iron Door Pull
₹456/piece
The "Amoke" black antique iron door pull is a cast iron handle in a black powder coated finish, with a curved grip set between two pointed, shield-shaped backplates.
Each textured backplate has three screw holes. Overall dimensions are listed as 212mm x 52mm x 40mm; the marked measurements read 209mm length, 49mm and 46mm plate widths and 38mm height. Screw holes sit 174mm apart from end to end, 119mm and 116mm apart between the side holes, and 36mm and 33mm apart across each plate.
The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-AMO-DOP-001-IR
"Aidan" Black Antique Iron Door And Cabinet Pull
₹263/piece
The "Aidan" black antique iron door and cabinet pull is a cast iron handle with round end plates, a gently bowed grip and a black powder coated finish.
Each round backplate takes two screws. Overall dimensions are 145mm x 37mm x 36mm. Screw holes sit 20mm apart on each plate, with 92mm and 126mm between holes from end to end.
The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-AID-DOP-002-IR
9 inch "Pontius" Black Antique Iron Door Pull
₹305/piece
The 9 inch "Pontius" black antique iron door pull is a one-piece cast iron door handle with a deep, bowed grip and pointed, cross-shaped end plates, each with one screw hole. Its overall size is listed as 228mm x 33mm x 40mm and marked as 228.6mm = 9 inch long, 33.2mm = 1.3 inch wide and 40.8mm Height; the screw holes sit 177.8mm = 7 inch apart. The surface has a hammered-look texture.
Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty.
Catalogue code: SH-PON-DOP-028-IR
"Aadan" Black Antique Iron Door And Cabinet Pull
₹189/piece
The "Aadan" black antique iron door and cabinet pull is a slim cast iron handle with spear-pointed ends, a curved grip and a black powder coated finish.
Each pointed end carries one screw hole. Overall dimensions are 159mm x 15mm x 22mm. The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-AAD-DOP-003-IR
"Chelluh" Black Antique Iron Door Pull
₹645/piece
The "Chelluh" Black Antique Iron Door Pull is a cast iron pull handle for doors with openwork ends. Its slim, gently curved grip splits into a V-shaped cut-out near each end, then turns down into rounded mounting feet, each drilled for a screw. The finish is black powder coated.
It is supplied as one piece with matching screws, made in India and carries a 2 year warranty.
Catalogue code: SH-CHE-DOP-041-IR
7 Inch "Salmon" Black Antique Iron Door Pull
₹205/piece
The 7 Inch "Salmon" Black Antique Iron Door Pull is a smooth, matte black cast iron door handle with swept, scroll-like ends. A subtle twisted ridge runs along the grip, and each rounded foot has a small fixing hole in its base. It is supplied as one piece with matching screws.
The finish displayed is Black Powder Coated; Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered are also offered. Made in India, with a 2 year warranty.
Catalogue code: SH-7inch-SAL-DOP-029-IR
10" Upharsin Black Antique Iron Hand Forged Door And Cabinet Pull
₹435/piece
The 10" Upharsin Black Antique Iron Hand Forged Door And Cabinet Pull is a hand-forged iron handle with a twisted centre grip, supplied as one piece in a black powder coated finish with matching screws.
Its grip bends out between two spade-shaped end plates with three screw holes each. Overall dimensions are 256mm x 49mm x 44mm; the holes sit 236mm = 9.3 inch apart at the outer pair and 180mm = 7.1 inch apart at the inner pair.
Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-10"-UPA-DOP-023-IR
6 Inch "Calah" Black Antique Iron Cabinet Pull
₹415/piece
The 6 Inch "Calah" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a faceted, tapering grip set between two square backplates. Each backplate has one screw hole and a raised pyramid-style centre, and the black surface carries a hammered texture.
The finish displayed is Black Powder Coated. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and a fifth option listed as "415". Overall dimensions are listed as 156mm x 32mm x 56mm, a length of 6.1 inch; the height is also marked as 54mm. A 142mm (5.5 inch) span is marked along the grip. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-6inch-CAL-CAB-054-IR; also printed as SH-6inch-CAL-CAB-042-IR
"Achim" Black Antique Iron Door Pull With Back Plate
₹1,178/piece
The "Achim" black antique iron door pull with back plate is a cast iron pull handle on a long back plate, supplied as one piece with matching screws.
Fleur-de-lis tips with fixing holes finish both ends of the flat plate, and the shaped grip stands off on two arms. It comes in black powder coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered or Natural Rust Lacquered finish.
The pull measures 135mm x 48mm x 53mm, its height also marked 53.2mm; the back plate measures 254mm x 47mm x 5mm, its width also marked 47.5mm = 1.8 inch. Fixing holes sit 152mm apart top to bottom and 25mm side to side. Made in India, with a 2 year warranty.
Catalogue code: SH-ACH-DOP-015-IR
10" Uriah Black Antique Iron Hand Forged Door And Cabinet Pull
₹435/piece
Round end plates mark the 10" Uriah Black Antique Iron Hand Forged Door And Cabinet Pull, a hand-forged iron handle with a twisted centre grip, supplied as one piece in a black powder coated finish with matching screws.
Each plate carries three screw holes. Overall dimensions are 249mm x 50mm x 44mm (249mm = 9.8 inch); the holes sit 241mm = 9.5 inch apart at the outer pair and 180mm = 7.1 inch apart at the inner pair.
Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-10"-URI-DOP-024-IR
"Lachish" Black Antique Iron Door Pull With Back Plate
₹665/piece
The "Lachish" black antique iron door pull with back plate is a one-piece cast iron unit that pairs a curved grip with a round-ended plate. The door pull measures 177mm x 22mm x 44mm (6.9 inch, 0.8 inch, 44mm Height) and the back plate 251mm x 50mm x 6mm (9.8 inch); the grip height is marked as 50mm Height. Grip and plate carry a hammered-look texture, and the plate has two screw holes at each end, 31mm = 1.2 inch across and 221mm = 8.7 inch lengthwise.
Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty.
Catalogue code: SH-LAC-DOP-063-IR
8 inch "Pontius" Black Antique Iron Door Pull
₹265/piece
The 8 inch "Pontius" Black Antique Iron Door Pull is a cast iron D-shaped door handle, supplied as one piece in a black powder coated finish with matching screws. Its curved, textured grip runs between two pointed end plates, each with one screw hole.
Overall dimensions are listed as 203mm x 33mm x 40mm; the printed measurements read 33.2mm = 1.3 inch across and 40.8mm height, with 155mm = 6.1 inch between the screw holes.
Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-8"-PON-DOP-033-IR
7 inch "Baalim" Black Antique Iron Door Pull
₹285/piece
The 7 inch "Baalim" Black Antique Iron Door Pull is a cast iron pull handle for doors, finished in Black Powder Coated. It has a straight, flat-faced grip that steps down to square mounting feet at each end.
Overall dimensions are 188mm x 23mm x 42mm. The pull measures 7.4 inch long, with 165mm hole to hole and 11.5 mm thickness. It is supplied as one piece with matching screws, made in India, and comes with a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BAA-DOP-034-IR
8 Inch "Ithran" Black Antique Iron Door And Cabinet Pull
₹312/piece
The 8 Inch "Ithran" Black Antique Iron Door And Cabinet Pull is a straight cast iron bar handle for doors and cabinets. Its flat bar has an angled, faceted face that narrows toward the centre and stands on two round mounting posts.
Overall dimensions are 222mm x 31mm x 32mm, a length of 8.7 inch, and the posts sit 171mm = 6.7 inch apart. The finish displayed is Black Powder Coated; it is also offered in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-8inch-ITH-DOP-064-IR
"Hazor" Black Antique Iron Door And Cabinet Pull
₹195/piece
The "Hazor" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets with a rounded, curved grip and flat rectangular end plates, each pierced with two screw holes. The black surface has a hammered texture.
The finish displayed is Black Powder Coated, and the pull also comes in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-HAZ-DOP-055-IR
7 inch "Delilah" Black Antique Iron Door Pull
₹179/piece
The 7 inch "Delilah" Black Antique Iron Door Pull is a slim cast iron door and cabinet pull with a smooth, rounded bar arching between two narrow oval end plates. Each plate has two screw holes, four in all, and the pull is supplied as one piece with matching screws.
The finish displayed is a silver Zinc Plated finish; the available finishes are listed as Nickel Plated and Black Powder Coated. Overall dimensions are 182mm x 14mm x 38mm. The size label reads 182mm = 7.1 inch long, 14mm wide and 38mm height, with the inner screw holes marked 133mm = 5.2 inch apart and the outer ones 158mm = 6.2 inch. Made in India, with a 2 year warranty.
Catalogue code: SH-7inch-DEL-DOP-031-IR
"Helam" Black Antique Iron Door And Cabinet Pull
₹215/piece
The "Helam" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets with a long, gently bowed grip rising from two rectangular backplates. Each backplate has one screw hole and an angled face where the grip meets it, and the black surface carries a hammered texture.
The finish displayed is Black Powder Coated, and the pull also comes in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-HEL-DOP-056-IR
"Leaf" Black Antique Iron Door And Cabinet Pull
₹251/piece
The "Leaf" black antique iron door and cabinet pull is a one-piece cast iron handle shaped as a long leaf, 175mm x 53mm x 39mm overall (175mm = 6.8 inch). Raised veins and a beaded midrib run along the curved grip, which tapers to a pointed tip with one screw hole and widens into a flared base with two holes and a small curled hook. Fixing holes are marked 127mm = 5 inch and 126mm = 4.9 inch apart, with the base holes 35mm apart.
Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty.
Catalogue code: SH-LEA-DOP-038-IR
Showing 20 of 70 in Door Pulls
Show 20 moreDoor Knobs8 products
"Camon" Black Antique Iron Door Knob
₹245/piece
The "Camon" Black Antique Iron Door Knob is a one-piece wrought iron knob for doors, finished in black powder coat. It gives a grip to pull or open a door.
The knob has a smooth oval top on a short stem that flares into a round base. Overall dimensions are 65mm = 2.5 inch across and 44mm = 1.7 inch high, with a 36mm = 1.4 inch base. It comes with a matching screw, is made in India and carries a 2 year warranty.
Catalogue code: SH-CAM-DKR-007-IR
"Agabus" Iron Door Knob With Rose
₹698/piece
The "Agabus" iron door knob with rose has a faceted octagonal knob topped with a flat round cap, set on an octagonal rose, made of wrought iron in a black powder coated finish, 60mm x 80mm overall. It gives a door a handle to grip when pulling it open or closed.
Knob, neck and rose all carry a deep hammered texture, and the rose measures 66mm across. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-AGA-DKR-003-IR
"Cabbon" Iron Door Knob With Rose
₹719/piece
The "Cabbon" iron door knob with rose has a tapered, eight-sided knob with a flat cap on a wide octagonal rose, made of wrought iron in a black powder coated finish, 71mm x 78mm overall. It gives a door a handle to grip when pulling it open or closed.
The knob measures 57mm across, and the rose carries a hammered texture with screw holes around its edge. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-CAB-DKR-006-IR
"Aquila" Brass Door Knob
₹1,575/piece
The "Aquila" Brass Door Knob is a solid brass knob for doors, 125mm (4.9 inch) in diameter and shaped as a many-petalled flower. Each pointed petal carries deep grooves and a textured surface around a raised central boss. The knob stands 35mm high and fixes on two posts set 62mm hole to hole.
The Antique Copper finish shows dark recesses with copper-toned highlights. It is offered in 11 finishes: Antique Copper, Antique Brass, Antique Brushed Nickel, Black Nickel, Black Powder Coated, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass and Satin Nickel.
Supplied as one piece with a matching screw, it is made in India, packed in Uttar Pradesh, and carries a 5 year warranty.
Catalogue code: SH-AQU-DKR-001-BR
"Bamah" Iron Door Knob With Rose
₹567/piece
The "Bamah" iron door knob with rose pairs a fluted, melon-shaped knob with a square rose with notched edges, made of wrought iron in a black powder coated finish, 60mm x 77mm overall. It gives a door a handle to grip when pulling it open or closed.
The ribbed knob measures 50mm across and has a textured top. The rose has a hammered texture and four screw holes set 35mm apart. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BAM-DKR-004-IR
"Adalia" Iron Door Knob With Rose
₹589/piece
The "Adalia" iron door knob with rose sets an oval knob on a round rose, made of wrought iron in a black powder coated finish, 60mm x 60mm x 65mm overall. It gives a door a handle to grip when pulling it open or closed.
The oval head measures 55mm across and sits on a short neck above a round rose with a hammered texture and three screw holes. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-ADA-DKR-002-IR
"Bealoth" Iron Door Knob With Rose
₹876/piece
The "Bealoth" iron door knob with rose, 55mm x 70mm overall, has a rounded, softly faceted knob on an octagonal rose. It is made of wrought iron in a black powder coated finish and gives a door a handle to grip when pulling it open or closed.
The knob measures 52mm across, and the knob and rose show a hammered surface. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BEO-DKR-005-IR
"Abihail" Iron Door Knob With Rose
₹945/piece
The "Abihail" Iron Door Knob With Rose is a wrought iron door knob with a faceted, hammered-texture head on a short stem above an octagonal rose plate. The finish is black powder coated.
Overall dimensions are listed as 88mm x 147mm; the marked dimensions read 61mm Width and 63mm Length.
It is supplied as one piece with a matching screw, made in India, packed in Uttar Pradesh, and carries a 2 year warranty.
Catalogue code: SH-ABI-DKR-001-IR
Hooks45 products
"Kibzaim" Black Antique Iron Hook
₹98/piece
The "Kibzaim" Black Antique Iron Hook is a tall cast iron double hook for hanging coats, hats and bags on a wall or door. Its long upper arm ends in a turned, ringed knob, and the lower hook curves up to a round knob end. The hourglass-shaped backplate has four screw holes and a raised studded centre strip.
It has a Black Powder Coated finish and measures 168mm x 42mm x 74mm overall. The hook is supplied as one piece with matching screws, is made in India and carries a 2 year warranty.
Catalogue code: SH-KIB-HOK-033-IR
"Keziz" Black Antique Iron Hook
₹88/piece
The "Keziz" Black Antique Iron Hook is a single-arm cast iron wall hook whose long, low arm reaches out and rises to a round knob at the tip, suited to hanging coats, towels and bags. The arm meets a rectangular backplate at a knuckle joint, and the plate carries two screw holes set 42mm hole to hole.
Overall dimensions are 105mm 61mm x 20mm: 4.1 inch in reach and 2.4 inch for the plate. It has a Black Powder Coated finish and is supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-KEZ-HOK-032-IR
"Manaen" Brass Hook
₹535/piece
The "Manaen" Brass Hook is a tall ornamental double coat hook in solid brass with an antique copper finish, measuring 146mm x 85mm x 70mm overall. Its long upper arm and curled lower hook take two items, such as a coat and a hat, from one fixing.
Both arms finish in scrolled, curled tips with moulded detail, and the hook mounts on a shaped decorative back plate with two screw holes. The copper tone is shaded darker along the edges for an aged look. It is supplied as one piece with a matching screw, made in India, and carries a 5 year warranty.
Catalogue code: SH-MAN-HOK-004-BR
"Tap" Black Antique heavy Iron hook
₹213/piece
Shaped like an old-style water tap, the "Tap" Black Antique heavy Iron hook is a cast iron wall hook for hanging towels, clothes or bags. A T-handle and spout sit on a round backplate, and a single curved hook with a ball tip hangs below.
The backplate fixes with two screw holes, and the hook comes as one piece with a matching screw. It is cast iron in a black powder coated finish, made in India, and carries a 2 year warranty.
Catalogue code: SH-TAP-HOK-028-IR
"Lamech" Black Antique iron hook
₹78/piece
The "Lamech" Black Antique iron hook is a double-arm cast iron coat hook in a black powder coated finish, for hanging coats, bags and similar items on a door or wall.
Two curved arms with rounded tips sweep out to either side of a ribbed, shield-shaped backplate, which fixes in place through three screw holes. Overall dimensions are 78mm x 42mm x 36mm. The hook is supplied as one piece with matching screw, is made in India and carries a 2 year warranty.
Catalogue code: SH-LAM-HOK-035-IR
"Lion" Black Antique Iron Hook
₹148/piece
"Lion" Black Antique Iron Hook is a cast iron double wall hook with a sculpted lion-head back plate, made for hanging items on a door or wall. It has a black powder-coated finish, and its two curved arms with rounded tips spread out from a twisted stem below the lion head.
The back plate carries two screw holes, and matching screws come with the hook. It is supplied as one piece, made in India and packed in Uttar Pradesh, with a 2 year warranty.
Catalogue code: SH-LIO-HOK-005-IR
"Judah" Black Antique Iron Hook
₹155/piece
The "Judah" Black Antique Iron Hook is a two-arm cast iron wall hook in a black powder coated finish, for hanging coats, hats and bags. Its long, gently curved upper arm ends in a rounded teardrop tip, and a short lower hook curls up to a knob end.
Both arms rise from an oval backplate with two screw holes, and a matching screw is included. The black surface has a lightly textured look. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-JUD-HOK-022-IR
"Judas" Black Antique Iron Hook
₹167/piece
The "Judas" Black Antique Iron Hook is a tall two-arm wall hook in cast iron with a black powder coated finish, for hanging coats, hats and bags. A long upswept upper arm ends in a flat, squared tip, while a short J-shaped lower hook sits just below the mounting plate.
The narrow rectangular backplate has two screw holes, and a matching screw is included. The finish has a glossy black look. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-JUD-HOK-021-IR
"Ethan" Black Antique Iron Hook
₹165/piece
The "Ethan" Black Antique Iron Hook is a compact single-arm iron wall hook with a turned knob tip, in a Black Powder Coated finish, for hanging coats, hats or bags.
A curved arm rises from a tapered, textured backplate with two screw holes and ends in a ringed, mushroom-shaped knob. It measures 76mm x 45mm x 75mm overall (2.9 inch tall, 1.7 inch across the knob, with the last figure marked as the height), with 31mm (1.2 inch) marked across the backplate.
It is supplied as one piece with a matching screw, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-ETH-HOK-002-IR
"Micah" Black Antique Iron Hook
₹143/piece
"Micah" Black Antique Iron Hook is a two-prong cast iron wall hook, 134mm (5.2 inch) tall, in a black powder-coated finish. A long upper arm and a short lower arm each end in a turned acorn-style finial, and both rise from an oval back plate.
Overall dimensions are 134mm x 31mm x 82mm. The upper arm reaches an 82mm height, the plate is 31mm wide, and its two screw holes sit 18mm apart. Matching screws are included. It is supplied as one piece, made in India and packed in Uttar Pradesh, with a 2 year warranty.
Catalogue code: SH-MIC-HOK-006-IR
"Leah" Black Antique Iron Hook
₹65/piece
The "Leah" Black Antique Iron Hook is a compact cast iron double hook with two curved arms spreading left and right, for hanging keys, towels, bags or light coats on a wall or door. Each arm ends in a rounded tip.
The arms meet at a pointed, fluted centre plate with two screw holes. It comes as one piece in a black powder coated finish and is supplied with a matching screw. Overall dimensions are 85mm x 52mm x 37mm. Made in India, it carries a 2 year warranty.
Catalogue code: SH-LEA-HOK-013-IR
"Isaiah" Black Antique Iron Hook
₹105/piece
The "Isaiah" Black Antique Iron Hook is a cast iron S-scroll wall hook in a Black Powder Coated finish, for hanging coats, hats, bags or towels.
Its arm sweeps up into a curled top and down into a deep, rounded lower hook, with an embossed, textured pattern along its length. It mounts on a square backplate with two screw holes.
It is supplied as one piece with a matching screw, made in India, and carries a 2 year warranty.
Catalogue code: SH-ISA-HOK-003-IR
"Habor" Black Antique Iron Hook
₹75/piece
The "Habor" Black Antique Iron Hook is a small cast iron wall hook on a heart-shaped backplate, for hanging keys, towels, robes or bags. A single curved arm projects from the plate and ends in a round ball tip with a ringed collar.
The backplate carries two screw holes, one either side of the arm. The hook comes as one piece in a black powder coated finish and is supplied with a matching screw. Overall dimensions are 50mm x 42mm x 49mm. Made in India, it carries a 2 year warranty.
Catalogue code: SH-HAB-HOK-014-IR
"Athaliah" Black Antique Hand Forged Iron Hook
₹765/piece
The "Athaliah" Black Antique Hand Forged Iron Hook is a wall-mounted iron hook rail with four U-shaped hooks on a hammered-texture flat bar, finished in Black Powder Coated, for hanging coats, bags, towels or keys.
Each hook is riveted to the bar, and the bar ends carry screw holes for fixing. It measures 262mm x 75mm x 62mm overall. The screw holes sit 248mm apart along the bar and 26mm apart at the end, and the hooks are 70mm long and 9mm thick.
It is supplied as one piece with a matching screw, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-ATH-HOK-001-IR (label: SH-ATH-HOK-01-IR)
"Dear" Black Antique heavy Iron hook
₹109/piece
The "Dear" Black Antique heavy Iron hook is a cast iron wall hook shaped as a deer head, made for hanging coats, bags and keys. The head carries branching antlers and detailed ears above a single upturned hook with a rounded tip, and a mounting plate on each side of the neck holds a screw hole.
It comes in a Black Powder Coated finish and measures 130mm x 93mm x 42mm overall. The hook is supplied as one piece with matching screws, is made in India and carries a 2 year warranty.
Catalogue code: SH-DEA-HOK-030-IR
"Ishiah" Brass Hook
₹205/piece
The "Ishiah" Brass Hook is a double-arm coat hook in solid brass with an antique copper finish. Its long upper arm and shorter lower hook let it hold two items, such as a coat and a bag, from one fixing.
Both arms end in acorn-style knobs with cross-hatched detail, and the arms rise from a shaped back plate with screw holes. The copper tone is darkened in the recesses for an aged look. Supplied as one piece, it measures 70mm x 28mm x 85mm overall. It comes with a matching screw, is made in India and carries a 5 year warranty.
Catalogue code: SH-ISH-HOK-002-BR
"Nethaniah" Brass Hook
₹612/piece
The "Nethaniah" Brass Hook is a solid brass double wall hook in an Antique Copper finish, for hanging coats, hats and bags on doors and walls.
A tall swan-neck upper arm ends in a round ball tip, and a short curled lower hook sits beneath it. Both rise from a shaped backplate with screw holes for fixing, and the copper-toned finish shades darker in the recesses. It measures 126mm x 31mm x 81mm overall, which is 4.9 inch by 1.2 inch, with the last figure marked as the height.
It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-NET-HOK-005-BR
"Jacob" Black Antique Iron Hook
₹114/piece
The "Jacob" Black Antique Iron Hook is a cast iron double wall hook in a Black Powder Coated finish, with a long upper arm and a short lower hook for hanging coats, hats or bags.
Both arms end in rounded teardrop tips and rise from an oval backplate with screw holes. Overall dimensions are listed as 118mm x 30mm 78mm: the first equal to 4.6 inch, the second across the top tip and the third marked as the height. The backplate screw holes sit 28mm and 18mm apart.
It is supplied as one piece with a matching screw, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-JAC-HOK-004-IR
"Nethaniah" Black Antique Iron Hook
₹209/piece
"Nethaniah" Black Antique Iron Hook is a double hook for a door, made of wrought iron with a black powder-coated finish. A long upper arm ends in a rolled scroll, a shorter lower hook curls up beneath it, and a pierced openwork bracket joins both to a shaped backplate with four screw holes.
It is supplied as one piece with matching screws. Overall dimensions are 126mm x 81mm x 31mm; the dimension marks read 126mm = 4.9 inch, 81mm height and 31mm =1.2 inch. The screw holes sit 47mm apart top to bottom and 21mm apart side to side. Made in India, it carries a 2 year warranty.
Catalogue code: SH-NET-HOK-041-IR
"Anchor" Black Antique iron hook
₹109/piece
The "Anchor" Black Antique iron hook is a cast iron wall or door hook shaped like a ship's anchor, for hanging clothes, bags, towels or keys. Its two upturned flukes give two hanging points below a round top ring and crossbar.
The hook has a black powder coated finish. Overall dimensions are 115mm x 88mm x 35mm, about 4.5 inch tall and 3.4 inch wide, with the 35mm marking the hook height. It fixes through a hole in the top ring and a hole at the base, 82mm hole to hole, and comes as one piece with matching screws. Made in India, it carries a 2 year warranty.
Catalogue code: SH-ANC-DKN-025-IR
Showing 20 of 45 in Hooks
Show 20 moreLetters And Numerals74 products
3" Thin Brass Letter-B
₹215/piece
Letter B in 3" thin brass is a door and house address letter made of solid brass with a polished lacquered finish (also listed as Polish Lacquered). The capital B has a serif stem and two open bowls, with one countersunk screw hole at the top of the stem and one on the lower bowl for flat mounting.
It arrives as one piece with matching screws for easy self-installation, and it pairs with other brass letters and numerals to spell out a house name or address on a door. The solid brass piece is durable and weatherproof, measures 3" overall and carries a 5 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-3"-THI-LET-B-BR
4" Iron Letter-F
₹155/piece
Letter F, a 4" iron letter made of wrought iron with a black powder-coated finish, for door lettering, house names and signs. It is supplied as one piece with matching screws and fixes through two screw holes, one at the top right corner and one at the foot of the stem.
Listed at 4" overall; the marked size is 75mm = 2.9 inch high and 49mm = 1.9 inch wide, with 5mm thickness and 62mm = 2.4 inch vertical spacing between the screw holes. The face has a textured black surface. Made in India, with a 2 year warranty.
Catalogue code: SH-4"-LETR-F-IR
6" Iron Numerals (1) Heavy Duty
₹450/piece
House number 1 in heavy-duty wrought iron, 6 inches tall with a Black Powder Coated finish, for marking a home's address on the door. The slim black figure has a flagged top, a hammered antique wrought-iron surface and two screw holes for easy self-installation, and matching screws come with it.
Listed as wrought iron, it is made by the cast iron method and finished in a rust-resistant black powder coat, which makes the piece durable and weatherproof. It measures 154mm = 6 inch tall and 5mm thick, 50mm = 1.9 inch across the base and 36mm = 1.4 inch across the top, with 84mm hole to hole. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-6"-HVY-NUM-1-IR
2" Broad Brass Numerals-0
₹155/piece
Brass house number 0, a 2" broad numeral in solid brass with a polished lacquered finish, made for marking a home address on a door. The zero has bevelled edges and two countersunk screw holes, and it comes with matching screws for easy self-installation.
Supplied as one piece, it brings style and function together and makes numbering a home simple while giving the door a smart look. It is durable and weatherproof. Country of origin is India, and it is packed in Uttar Pradesh. It carries a 5 year warranty.
Catalogue code: SH-2"-BRD-NUM-0-BR
6" Iron Numerals (4) Heavy Duty
₹450/piece
House number 4 in heavy-duty wrought iron, 6 inches tall and finished in Black Powder Coated, for putting an address on a home's door. The angular black figure has a hammered, antique wrought-iron surface and two screw holes for easy self-installation, with matching screws included.
Listed as wrought iron, it is made by the cast iron method and given a rust-resistant black powder coat, which makes the piece durable and weatherproof. It measures 154mm = 6 inch tall, 102mm = 4 inch wide and 5mm thick, with 93mm hole to hole. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-6"-HVY-NUM-4-IR
4" Iron Letter-J
₹167/piece
The 4" Iron Letter J is a wrought iron letter in black powder coat, shaped as a straight upright ending in a rounded hook, for house names and signs on a door, gate or wall. It is supplied as one piece with matching screws; one recessed screw hole sits at the top of the upright and the other in the curve of the hook. The black surface has a lightly textured look.
Its overall dimension is listed as 4"; the letter measures 77mm = 3 inch tall, 46mm = 1.8 inch wide and 5mm thick, with the fixing holes 61mm = 2.4 inch apart. Made in India, it carries a 2 year warranty.
Catalogue code: SH-4"-LETR-J-IR
6" Brass Numerals-3
₹712/piece
Numeral 3 house number in solid brass, 6 inch tall, with a Polished Lacquered finish for a door address. It measures 153mm = 6 inch high and 64mm = 2.5 inch wide, with 5mm thickness and two countersunk screw holes 135mm hole to hole.
The solid brass build is durable and weatherproof, and the simple mounting style gives an easy self install with matching screws. It joins style and function for numbering a home's door. Supplied as one piece, made in India, with a 5 year warranty.
Catalogue code: SH-6"-NUM-9-BR; label reads SH-6"-NUM-3-BR
3" Thin Brass Letter-H
₹215/piece
Letter H in 3" thin brass, a door and house address letter made of solid brass with a polished lacquered finish (also listed as Polish Lacquered). The capital H has flared serif ends on both uprights and a straight crossbar, with two countersunk screw holes set at opposite corners for flat mounting.
Supplied as one piece with matching screws, it installs easily and spells out a house name or address on a door with other brass letters and numerals. The solid brass piece is durable and weatherproof, has an overall dimension of 3" and carries a 5 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-3"-THI-LET-H-BR
6" Iron Numerals (2) Heavy Duty
₹450/piece
House number 2 in heavy-duty wrought iron, standing 6 inches tall in a Black Powder Coated finish, made for numbering a home's door. The black figure has a curled top, a hammered antique wrought-iron surface and two screw holes for easy self-installation, with matching screws included.
Listed as wrought iron, it is made by the cast iron method and given a rust-resistant black powder coat, which makes the piece durable and weatherproof. It measures 154mm = 6 inch tall, 82mm = 3.2 inch wide and 5mm thick, with 90mm hole to hole. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-6"-HVY-NUM-2-IR
3" Thin Brass Letter-T
₹215/piece
Brass house letter T, 3" overall, made of solid brass for names, initials and address plaques on a door. The T has a wide crossbar with curved, downturned ends, a flared foot and a polished lacquered finish. One screw hole sits at the centre of the crossbar and one at the foot of the stem, so the matching screws supplied fix it in place for easy self-installation.
The 3" Thin Brass Letter-T is supplied as one piece and is durable and weatherproof. Made in India, with a 5 year warranty.
Catalogue code: SH-3"-THI-LET-T-BR
3" Thin Brass Letter-V
₹215/piece
Letter V in solid brass, 3" overall, from the 3" Thin Brass Letter range for house names, initials and address plaques on a door. This serif V has a polished lacquered finish and two screw holes, one near the top of the left arm and one just above the point, for the matching screws supplied, and is easy to self-install.
It comes as one piece and is durable and weatherproof. Made in India, with a 5 year warranty.
Catalogue code: SH-3"-THI-LET-V-BR
2" Broad Brass Numerals-8
₹155/piece
Numeral 8 in solid brass: a 2" broad address number with a polished lacquered finish, made to mark a house door or plaque. It comes as one piece with matching screws and mounts through two countersunk holes set diagonally, one at the upper left and one at the lower right, so it is easy to self-install.
The solid brass build is durable and weatherproof, and the rounded, flat-faced figure combines style and function for a simple, good-looking house number on a door. Made in India and packed in U P, India, it carries a 5 year warranty.
Catalogue code: SH-2"-BRD-NUM-8-BR
6" Brass Numerals-5
₹712/piece
Numeral 5 in a 6 inch solid brass house number set, a door address number with a Polished Lacquered finish. It measures 153mm = 6 inch tall and 63mm = 2.4 inch wide, with 5mm thickness and two countersunk screw holes set 134mm hole to hole.
Made from solid brass, this numeral is durable and weatherproof. The simple mounting style makes it an easy self install, and it comes with matching screws. It brings style and function together for numbering a home's door. Supplied as one piece, made in India, with a 5 year warranty.
Catalogue code: SH-6"-NUM-5-BR
4" Iron Letter-T
₹167/piece
A capital T in wrought iron, the 4" Iron Letter-T is made for door lettering and carries a black powder coated finish. It is supplied as one piece with matching screws.
Two countersunk screw holes sit in line, one at the centre of the crossbar and one at the foot of the stem. The black surface has a textured, hammered look.
Overall dimensions are listed as 4". The printed measurements read 77mm = 3 inch tall and 56mm = 2.2 inch wide, with 5mm thickness, and the holes are 60mm = 2.3 inch apart. It is made in India, packed in U P, India, and backed by a 2 year warranty.
Catalogue code: SH-4"-LETR-T-IR
6" Iron Numerals (8) Heavy Duty
₹450/piece
Black iron house number 8, 6-inch "Heavy Duty", in an antique wrought iron style for doors and address plaques. The figure 8 has two open loops, a hammered black texture and two screw holes, and comes with matching screws for easy self-install.
It is made of wrought iron, produced by a cast iron method, with a rust-resistant Black Powder Coated finish that keeps it durable and weatherproof. Style and function come together in a simple, good-looking way to number a home. It measures 154mm = 6 inch tall and 84mm = 3.3 inch wide, with 5mm thickness and 85mm hole to hole. It is supplied as one piece, made in India and carries a 2 year warranty.
Catalogue code: SH-6"-HVY-NUM-8-IR
3" Thin Brass Letter-O
₹215/piece
A 3-inch thin brass letter O for door lettering, house names and address plaques, made of solid brass and given a polished lacquered finish. The O is a smooth oval ring with two countersunk screw holes set opposite each other at mid-height, and it comes with matching screws for easy self-installation on a door.
The piece is durable and weatherproof. It is supplied as one piece with an overall dimension of 3". The finish displayed is Polished Lacquered, offered as Polish Lacquered. Country of origin is India, it is packed in U P, India, and it carries a 5 year warranty.
Catalogue code: SH-3"-THI-LET-O-BR
4" Iron Letter-Y
₹167/piece
4" Iron Letter Y in wrought iron with a black powder coated finish, a house letter for a name or address on a door. It comes as one piece with matching screws and fixes through three recessed screw holes, one at the tip of each arm and one at the foot of the stem.
The Y has a block-letter shape with a textured matt black surface. Overall dimensions are listed as 4"; the dimension drawing reads 77mm = 3 inch tall and 61mm = 2.4 inch wide, with 38mm = 1.4 inch between the two upper holes, 61mm = 2.4 inch from upper to lower hole, and 5mm Thickness. Made in India and backed by a 2 year warranty.
Catalogue code: SH-4"-LETR-Y-IR
6" Iron Numerals (0) Heavy Duty
₹450/piece
The 6" Iron Numerals (0) Heavy Duty is a black powder-coated wrought iron house number, the numeral 0, for numbering a home's front door. It is made by the cast iron method and finished in a rust-resistant black powder coat, so it is durable and weatherproof, and its wrought iron antique style brings style and function together for a good-looking door.
The numeral has a hammered, textured face and two screw holes. It comes with matching screws and is easy to self-install. Overall size is 6": 154mm (6 inch) high, 89mm (3.5 inch) wide and 5mm thick, with 97mm hole to hole. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-6"-HVY-NUM-0-IR
2" Broad Brass Numerals-4
₹155/piece
Brass house number "4" in a 2" broad style, a solid brass door numeral for showing a home address on a door or address plaque. This one piece has an open-triangle 4 shape in a polished lacquered finish, with two countersunk screw holes, one near the top of the upright and one in its foot.
The solid brass build is durable and weatherproof, and matching screws are included for easy self-install. Overall dimensions are 2". Country of origin is India; it is packed in U P, India, and backed by a 5 year warranty.
Catalogue code: SH-2"-BRD-NUM-4-BR
3" Thin Brass Letter-X
₹215/piece
Solid brass letter X, 3" thin style, a polished lacquered address letter for spelling out house names and door signs. The serif X has two countersunk screw holes placed diagonally, at the top left and bottom right, and it comes with matching screws for easy self-installation.
Supplied as one piece, it brings style and function together and makes marking a home simple while giving the door a smart look. It is durable and weatherproof. Country of origin is India, and it is packed in Uttar Pradesh. It carries a 5 year warranty.
Catalogue code: SH-3"-THI-LET-X-BR
Showing 20 of 74 in Letters And Numerals
Show 20 moreLetter Plates And Mail Slots11 products
"Magbish" Georgian Black Antique Iron Letter Plate
₹1,747/piece
The "Magbish" Georgian Black Antique Iron Letter Plate is a rectangular wrought iron letter plate edged with a rope-twist border, displayed in a Black Powder Coated finish. It comes as one piece with matching screws. A recessed flap 209mm (8.2 inch) long sits in the face, and the back carries a coiled spring with fixing holes 209mm (8.2 inch) apart.
Overall dimensions are listed as 182mm x 97mm x 8mm; the length is also given as 282mm (11.1 inch).
It is offered in Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, it carries a 2 year warranty.
Catalogue code: SH-MAG-GEO-LTP-005-IR
"Lydia" Black Antique Iron Letter Plate
₹865/piece
The "Lydia" black antique iron letter plate is a hinged wrought iron flap for a door mail slot, finished in Black Powder Coated and textured with a hammered pattern across its whole face.
The flap hangs from two separate hinge brackets at its top corners, each bracket with two screw holes. It measures 250mm x 80mm x 12mm overall, with the length given as 250mm = 9.8 inch and the 12mm marked as its height.
It is supplied as one piece with matching screws and comes with a 2 year warranty. Country of origin is India, and it is packed in U P, India. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-LYD-LTP-003-IR
"Cherethims" Decorative Brass Letter Plate
₹1,832/piece
The "Cherethims" Decorative Brass Letter Plate is a solid brass door letter plate in antique copper, with "LETTERS" in raised ornamental capitals inside a rounded recessed centre. Pointed ends and engraved bands of leaves and scrolls give the plate its decorative outline, and a matching open frame carries two screw holes set 149mm hole to hole.
It measures 202mm x 84mm x 3mm, that is 7.9 inch long and 3.3 inch high. The recessed centre is 124mm (4.8 inch) wide, and both the centre and the frame opening are 39mm (1.5 inch) high. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-CHE-LTP-004-BR
"Bethsaida" Black Antique Iron Letter Plate
₹1,481/piece
The "Bethsaida" black antique iron letter plate is a plain rectangular wrought iron cover for a door mail slot, finished in Black Powder Coated and measuring 255mm x 77mm x 5mm overall (10 inch long).
A pitted, hammered texture runs across the straight-edged frame and the recessed flap, which measures 195mm = 7.6 inch by 42mm = 1.6 inch.
It is supplied as one piece with matching screws and comes with a 2 year warranty. Country of origin is India, and it is packed in U P, India. Other finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BET-LTP-002-IR
10 inch "Bethsaida" Black Antique Iron Letter Plate
₹1,278/piece
The 10 inch "Bethsaida" Black Antique Iron Letter Plate is a wrought iron letter plate for a door mail slot, measuring 255mm x 77mm x 5mm overall. Its front has a hammered, textured surface, with a raised border around a recessed flap panel.
On the back, the inner flap hangs from a rod fitted with a coiled spring, and two round fixing bosses sit at the sides. The finish displayed is black powder coated. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BET-LTP-008-IR
"Mail" Decorative Brass Letter Plate
₹3,775/piece
The "Mail" Decorative Brass Letter Plate is a solid brass door letter plate, 269 x 95mm, with the word "MAIL" raised in bold serif capitals across its recessed centre. The front plate has stepped, rounded ends and an engraved border of lattice, heart and scroll patterns in an antique brass tone, and it pairs with a matching open-centred frame in the same pattern.
It is listed as supplied as one piece, with matching screws. The available finish is Antique Brass; the finish displayed is listed as Black Powder Coated. Made in India, it carries a 5 year warranty.
Catalogue code: SH-MAI-LTP-002-BR
"Bartholomew" Decorative Brass Letter Plate
₹3,175/piece
The "Bartholomew" Decorative Brass Letter Plate is a solid brass door letter plate in antique brass, with "LETTERS" cast in raised capitals across its recessed centre. Curled scroll ends and leaf crests at the top and bottom shape the plate, and a matching open frame follows the same outline, with two screw holes set 228mm hole to hole.
It measures 257 x 86mm x 3mm, that is 10.11 inch long and 3.3 inch high; its dimension label reads 3.3mm Thickness. The recessed centre is 181mm (7.15 inch) by 38mm (1.4 inch). It is listed as supplied as one piece, with matching screws, made in India, with a 5 year warranty.
Catalogue code: SH-BAR-LTP-003-BR
"Naarah" Black Antique Iron Letter Plate
₹1,439/piece
The "Naarah" black antique iron letter plate is a wide rectangular wrought iron mail slot cover for a door, measuring 257mm x 105mm x 5mm overall (10.1 inch long) and finished in Black Powder Coated.
A deep hammered texture covers the whole face, including the recessed flap, which measures 198mm = 7.7 inch by 45mm = 1.7 inch.
It is supplied as one piece with matching screws and comes with a 2 year warranty. Country of origin is India, and it is packed in U P, India. Alternative finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-NAA-LTP-006-IR
"Beeroth" Decorative Iron Letter Plate
₹1,597/piece
The "Beeroth" Decorative Iron Letter Plate is a wrought iron door letter plate with fleur-de-lis shaped ends, displayed in a Black Powder Coated finish. It comes as one piece with matching screws.
The face has a textured, hammered-look surface framing a recessed flap 199mm (7.8 inch) long, with a coiled spring on the back. Overall dimensions are 350mm x 90mm x 4mm, and the fixing holes sit 275mm (10.8 inch) apart.
It is offered in Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, it carries a 2 year warranty.
Catalogue code: SH-BEE-DEC-LTP-001-IR
"Letters" Black Antique Iron Letter Plate
₹1,145/piece
The "Letters" Black Antique Iron Letter Plate is a wrought iron letter plate that frames a door mail slot. A recessed central panel carries the word LETTERS in raised capitals, set inside a flat rectangular border.
The finish displayed is black powder coated, and the plate is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are listed as 317mm x 101mm x 6mm; the marked dimensions read 318mm = 12.5 inch long, 106 mm high and 9mm Thickness. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-LET-LTP-007-IR
"Alammelech" Decorative Brass Letter Plate
₹3,575/piece
The "Alammelech" Decorative Brass Letter Plate is a solid brass letter plate for a front door, framing the slot that letters and post pass through, at 280mm x 75mm. Its long rectangular plate carries a raised border of repeating loop-and-drop motifs around a recessed centre panel cast with interlaced scrolls and leaves, in a deep copper tone.
The available finish is Antique Copper; the finish displayed is listed as Black Powder Coated. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-ALA-LTP-001-BR
Push Plates11 products
“Malachi” Black Antique Iron Push Plate
₹745/piece
“Malachi” Black Antique Iron Push Plate is a 345mm x 75mm x 3mm wrought iron door push plate with a pointed decorative finial at each end, in a Black Powder Coated finish. A push plate guards the door face where hands push it open.
The body has gently curved sides and a hammered texture, and each finial carries a round cut-out. Four screw holes, two at each end, sit 52mm = 2 inch apart across and 237mm = 9.3 inch apart lengthwise; the overall length is 345mm = 13.5 inch. It is supplied as one piece with matching screws. Made in India, with a 2 year warranty.
Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
Catalogue code: SH-MAL-PSP-002-IR
"Nahash" Decorative Brass Push Plate
₹2,875/piece
The "Nahash" Decorative Brass Push Plate is an ornate solid brass door push plate with a shell-and-scroll crest topped by a finial and a matching pendant at the base. A plain central panel, framed by a rope-twist border, takes the push of the hand and guards the door's surface.
Four screw holes sit in the decorative bands above and below the panel, spaced 192mm = 7.5 inch apart lengthwise and 50mm = 1.9 inch across. Overall dimensions are listed as 240mm x 74mm x 8mm; the marked length reads 340mm = 13.3 inch. The finish displayed is polished lacquered, offered as Polish Lacquered. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 5 year warranty.
Catalogue code: SH-NAH-DEC-PSP-004-IR
Quartus Decorative Iron Push Plate
₹1,395/piece
The Quartus Decorative Iron Push Plate is a one-piece cast iron push plate in black, with pointed leaf-scroll ends that each carry two fixing holes. Based on an original vintage design, it is very popular for offices, restaurants and homes, and its rope border and ornate detailing make it one of the most elegant push plates available today.
It measures 381mm x 75mm x 4mm. It is also described as cast in brass. The displayed finish is Antique Copper and the available finish is Black Powder Coated; it is offered in a choice of 11 finishes. It comes with matching screws and a 2 year warranty, and is made in India.
Catalogue code: SH-QUA-DEC-PSP-011-BR
"Pedaiah" Decorative Brass Push Plate
₹2,075/piece
The "Pedaiah" Decorative Brass Push Plate is a one-piece solid brass push plate embossed with flowering vines, two sunflower-style rosettes and a perched bird, with a fixing hole at each corner. Based on an original Decorative Push Plate design, it is very popular for offices, restaurants and homes, and its rope border and ornate detailing make it one of the most elegant push plates available today.
It measures 261mm x 77mm x 3mm, with holes 58mm and 249mm apart. The displayed finish is Polished Lacquered; it is offered in a choice of 11 finishes, with Polish Lacquered listed. It comes with matching screws and a 5 year warranty, and is made in India.
Catalogue code: SH-PED-PSP-009-BR
"Lebonah" Black Antique Iron Push Plate
₹765/piece
"Lebonah" Black Antique Iron Push Plate is a flat rectangular wrought iron door push plate, 300mm x 76mm x 5mm, in a Black Powder Coated finish. A push plate guards the door face where hands push it open.
Its face has a hammered texture, and it fixes through six screw holes: two at each end and two at mid-length. The holes sit 58mm = 2.2 inch apart across, 280mm = 11 inch apart end to end and 140mm = 5.5 inch from mid-length to the end; the overall length is 300mm = 11.8 inch. It is supplied as one piece with matching screws. Made in India, with a 2 year warranty.
Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
Catalogue code: SH-LEB-PSP-001-IR
"Quartus" Decorative Brass Push Plate
₹2,933/piece
The "Quartus" Decorative Brass Push Plate is a one-piece solid brass push plate based on an original vintage design, displayed in Antique Copper. Very popular for offices, restaurants and homes, its rope border and ornate detailing make it one of the most elegant push plates available today.
Dimensions are 381mm x 74mm x 5mm, also given as 6mm thickness, with holes 23mm and 122mm apart. It comes with matching screws and a 5 year warranty, and is made in India.
Of its 11 finishes, ten are listed: Antique Copper, Antique Brass, Antique Brushed Nickel, Black Nickel, Matt Chrome, Polish Lacquered, Polished Chrome, Polished Nickel, Satin Brass and Satin Nickel.
Catalogue code: SH-QUA-DEC-PSP-010-BR
"Obil" Decorative Brass Push Plate
₹2,589/piece
The "Obil" Decorative Brass Push Plate is a solid brass door push plate with fleur-de-lis scrollwork at both ends, a beaded edge and a smooth central panel that guards the door where hands push it open.
Screw holes sit in the scrolled ends, spaced 240mm = 9.4 inch apart lengthwise and 39mm = 1.5 inch across. Overall dimensions are listed as 322mm x 74mm x 8mm, marked as 12.6 inch by 2.9 inch; the marked thickness reads 7mm Height. The finish displayed is polished lacquered, offered as Polish Lacquered. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 5 year warranty.
Catalogue code: SH-OBI-DEC-PSP-006-IR
"Perga" Black Antique Iron Push Plate
₹615/piece
"Perga" black antique iron push plate with a hammered, textured face, made of wrought iron and sized 305mm x 64mm x 5mm. Mounted on the push side of a door, it keeps hand marks off the door surface. Each end has notched corner tabs carrying two screw holes; the holes sit 288mm (11.3 inch) apart lengthwise and 45mm (1.7 inch) across, and the overall length reads 305mm = 12 inch.
The finish displayed is black powder coated, with natural iron lacquered, natural iron unlacquered, matte buff lacquered and natural rust lacquered also offered. It comes as one piece with matching screws, is made in India and has a 2 year warranty.
Catalogue code: SH-PER-PSP-008-IR
"Marsena" Georgian Black Antique Iron Push Plate
₹835/piece
"Marsena" Georgian black antique iron push plate in wrought iron, a door push plate measuring 302mm x 74mm x 7mm. Fixed to the push side of a door, it keeps hand marks off the door surface. The plate is a plain rectangle framed by a twisted rope border, with two screw holes at each end, spaced 263mm (10.3 inch) apart lengthwise and 34mm (1.3 inch) across. The overall length reads 302mm = 13.3 inch.
The finish displayed is black powder coated; it is also offered in natural iron lacquered, natural iron unlacquered, matte buff lacquered and natural rust lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-MAR-PSP-003-IR
"Nathanael" Georgian Brass Push Plate
₹2,535/piece
The "Nathanael" Georgian Brass Push Plate is a solid brass door push plate, or finger plate, that guards a door's surface where hands push it open. It is a long, narrow plate with canted ends, a rope-twist edge and four screw holes, one near each corner.
Overall dimensions are 270mm x 65mm x 7mm, with the length marked as 10.6 inch. The screw holes sit 221mm = 8.7 inch apart lengthwise and 35mm = 1.3 inch apart across. The finish displayed is polished lacquered, offered as Polish Lacquered. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 5 year warranty.
Catalogue code: SH-NAT-GEO-PSP-005-IR
"Ohel" Decorative Brass Push Plate
₹2,933/piece
"Ohel" Decorative Brass Push Plate is a solid brass door push plate measuring 380mm x 78mm x 7mm, supplied as one piece with matching screws. A push plate guards the door face where hands push it open.
The plate is cast with scrolled ornament at the top and bottom, framing a long oval recessed centre, and it fixes through four screw holes, two at each end. The holes sit 40mm = 1.5 inch apart across and 280mm = 11 inch apart lengthwise, and the overall length reads 380mm = 13.3 inch. The finish is listed as Polished Lacquered, the one finish offered, while the plate itself carries a copper tone with darkened relief. Made in India, with a 5 year warranty.
Catalogue code: SH-OHE-DEC-PSP-007-IR
Bell Push17 products
"Belshazzar" Decorative Brass Bell Push
₹3,760/piece
"Belshazzar" Decorative Brass Bell Push is a round, solid brass doorbell push in Antique Copper, measuring 122mm x 122mm (4.8 inch) across. A carved flower rosette surrounds the domed centre button, framed by scrollwork and a jagged, sunburst-style edge. Its height is 50mm, and the screw holes around the rim sit 85mm and 62mm apart, hole to hole. The back carries a white base with two brass screw terminals for the bell wiring. Supplied as one piece with matching screws, it is made in India with a 5 year warranty.
Catalogue code: SH-BEL-BEL-012-BR
"Baasha" Decorative Iron Bell Push
₹435/piece
"Baasha" Decorative Iron Bell Push, a cast iron doorbell push button on a rectangular plate cast with raised foliate scrollwork at top and bottom and a pillar motif either side of the button. Pressing the brass-coloured button with its knurled collar rings the connected doorbell.
The finish is black powder coated, with a fixing hole above and below the button, 57mm apart. Overall dimensions are 109mm x 50mm x 16mm, with the length also given as 4.30 inch and a 16mm height.
It is supplied as one piece with matching screws and a 2 year warranty. Further finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Country of origin is India; packed in U P, India.
Catalogue code: SH-BAA-BEL-004-IR (the label reads SH-ARA-BEL-004-IR)
"Anim" Brass Georgian Bell Push Or Push Button
₹456/piece
"Anim" Georgian bell push, or push button, in solid brass, sized 74mm x 33mm x 15mm, for ringing a doorbell. The rectangular back plate has a twisted rope border and a round button set in a knurled collar, with one screw hole above and one below, 47mm (1.8 inch) apart. The plate reads 5.4mm thick, the button stands 15mm high, and the length reads 74mm = 2.9 inch.
The finish displayed is polished lacquered, a bright gold-toned brass. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-ANI-BEL-001-BR (the product label reads H-ANI-BEL-001-BR)
3.5 Inch "Chemarims" Decorative Brass Bell Push
₹1,190/piece
The 3.5 Inch "Chemarims" Decorative Brass Bell Push is a solid brass doorbell button with a raised floral and leaf border framing a smooth, recessed centre panel. A domed round push button sits in the middle, with one screw hole above it and one below. The finish displayed is listed as Antique Brass, while the available finish is listed as Antique Copper; the plate itself has a dark, copper-toned look. Supplied as one piece with matching screws, it is made in India and comes with a 5 year warranty.
Catalogue code: SH-CHE-BEL-009-BR
"Floral" Decorative Iron Bell Push
₹234/piece
"Floral" Decorative Iron Bell Push, a cast iron doorbell push button shaped as an eight-pointed flower with ribbed petals radiating from a central brass-coloured button. Pressing the button rings the connected doorbell.
The plate comes in a black powder coated finish, with fixing holes in the top and bottom points. Overall dimensions are 119mm x 119mm x 14mm, with the width and length each also given as 4.6 inch and a 14mm height.
It is supplied as one piece with matching screws and a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-FLO-BEL-005-IR
"Baara" Black Antique Iron Bell Push
₹469/piece
"Baara" Black Antique Iron Bell Push, a cast iron doorbell push button on a plate with arched top and bottom ends and a raised rectangular centre panel. Pressing the brass-coloured button with its knurled collar rings the connected doorbell.
The finish is black powder coated, with a fixing hole in each arched end, 69mm (2.7 inch) apart. Overall dimensions are listed as 99mm x 52mm x 9.5mm; the label gives the length as 99.2mm = 3.9 inch, the width as 52mm = 2.04 inch, a 9.5mm plate thickness and a 32mm height including the rear terminal.
It is supplied as one piece with matching screws and a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-BAA-BEL-006-IR
"Judah" Decorative Brass Bell Push
₹1,780/piece
"Judah" Decorative Brass Bell Push is a solid brass doorbell push cast as a lion's head, with the round bell button set in the lion's mouth. The mane, whiskers and beard stand out in deep relief, and a fixing hole sits on each side of the mane. Finished in Antique Copper, a dark tone with copper highlights on the raised detail, it is supplied as one piece with matching screws. Made in India, it carries a 5 year warranty.
Catalogue code: SH-JUD-BEL-010-BR
"Chemarims" Decorative Brass Bell Push
₹1,075/piece
"Chemarims" decorative brass bell push in Antique Brass, a doorbell push plate framed by a raised floral scroll border. It is made of solid brass, supplied as one piece, and measures 109mm x 48mm x 14mm overall (4.2 x 1.8 inch).
A smooth brushed centre panel sits inside the ornate border, with dark recesses setting off the raised flowers and leaves. A domed push button with a stepped collar fills the middle, and two screw holes sit 73mm hole to hole. The plate is 4mm thick and the button stands 14mm high. Matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-CHE-BEL-004-BR (the product label reads SH-BAA-BEL-004-BR)
"Lion Face" Decorative Brass Bell Push Or Push Button
₹1,578/piece
"Lion Face" decorative bell push, or push button, in solid brass, shaped as a sculpted lion's head with the round button set in the mane below the chin; it measures 108mm x 68mm x 42mm. Pressing the button rings a doorbell. Two screw holes sit either side of the face, 58mm hole to hole, and the size reads 108mm = 4.2 inch long by 68mm = 2.6 inch wide, standing 42mm high.
The finish displayed is listed as Antique Brass, and the finish offered as Antique Copper; the lion comes in both a dark copper tone and an antique brass tone. It is supplied as one piece with matching screws, made in India, with a 5 year warranty.
Catalogue code: SH-LIO-BEL-002-BR
"Derbe" Decorative Brass Bell Push
₹1,190/piece
"Derbe" decorative brass bell push in Antique Copper, a scalloped four-lobed doorbell plate. It is made of solid brass and supplied as one piece.
Raised leaf and scroll ornament on a dark ground fills the shaped plate and frames a round, dished centre, where a small push button stands in a ribbed collar. Four screw holes, one in each lobe, fix it to the wall, and matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-DER-BEL-006-BR
"Baasha" Decorative Brass Bell Push
₹980/piece
"Baasha" decorative brass bell push in an Antique Copper finish, a push-button plate for ringing a doorbell. It is made of solid brass, supplied as one piece, and measures 108mm x 49mm x 15mm overall (4.2 x 1.9 inch).
The upright rectangular plate carries raised leaf-and-scroll ornament on a dark textured ground at the top and bottom, slender column motifs down each side, and a domed round push button at the centre. Two screw holes sit 57mm hole to hole, the plate is 4mm thick and the button stands 15mm high. Matching screws come with it. Made in India, with a 2 year warranty.
Catalogue code: SH-BAA-BEL-003-BR
"Elohi" Decorative Brass Bell Push
₹1,230/piece
"Elohi" Decorative Brass Bell Push is a solid brass doorbell push with a hammered, pebble-textured rectangular plate in Antique Copper. A large round, stepped boss in the middle holds the domed push button, with a screw hole above and below it. Straight, smooth edges frame the textured face. It is supplied as one piece with matching screws, made in India and backed by a 5 year warranty.
Catalogue code: SH-ELO-BEL-011-BR
"Anim" Iron Georgian Bell Push
₹398/piece
"Anim" Iron Georgian Bell Push, a compact cast iron doorbell push button whose black powder coated plate is framed by a rope-twist border. It is also named the "Anim" Antique Iron Georgian Bell Push or Push Button. Pressing the brass-coloured button with its knurled collar rings the connected doorbell.
The rectangular plate has a fixing hole above and below the button, 47mm (1.8 inch) apart. Overall dimensions are 74mm x 33mm x 15mm, with the length also given as 2.9 inch and a 15mm height.
It is supplied as one piece with matching screws and a 2 year warranty. Further finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Country of origin is India; packed in U P, India.
Catalogue code: SH-ANI-BEL-002-IR
"Eber" Decorative Brass Bell Push
₹1,245/piece
"Eber" Decorative Brass Bell Push is a solid brass doorbell push button in an Antique Copper finish, made to sit beside a door and ring the bell when pressed. The tall rectangular plate is cast with a dense geometric pattern of arrow motifs, hexagon bands and scrolls, with a domed round button at its centre and a screw hole in each corner. It is supplied as one piece with matching screws, made in India and carries a 5 year warranty.
Catalogue code: SH-EBE-BEL-008-BR
"Chimham" Decorative Brass Bell Push
₹975/piece
"Chimham" decorative brass bell push in Antique Copper, a plain, clean-lined doorbell push plate. It is made of solid brass and supplied as one piece, with overall dimensions of 110mm x 45mm x 5mm (4.3 x 1.7 inch).
The smooth rectangular plate has a brushed dark copper tone and a rounded push button set in a ringed collar at the centre. Two screw holes sit 57mm hole to hole. The plate is 5mm thick, and the push button rises to a 16mm height. Matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-CHI-BEL-005-BR
"Arah" Decorative Iron Bell Push
₹395/piece
The "Arah" Decorative Iron Bell Push is a cast iron push button for ringing a door bell, displayed in a black powder coated finish. A round brass-coloured button sits centrally on a textured plate with pointed, scroll-cut ends. It also carries the name "Arah" Antique Iron Bell Push.
Overall dimensions are 125mm x 32mm x 15mm, with 89mm (3.5 inch) between the fixing holes. Supplied as one piece with matching screws. Available finishes are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-ARA-BEL-003-IR
"Eglaim" Decorative Brass Bell Push
₹1,085/piece
"Eglaim" decorative brass bell push, a rectangular doorbell plate with bold palmette ornament. It is made of solid brass and supplied as one piece. The finish displayed is listed as Antique Brass, and the available finish as Antique Copper.
Raised palmette and cross motifs on a dark textured ground surround a ring of geometric pattern, with a domed push button at the centre. A raised edge frames the plate, and two screw holes sit at the top and bottom. Matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-EGL-BEL-007-BR
Door Bells18 products
"Elijah" Brass Decorative Manual Old Fashioned Door Bell
₹4,560/piece
"Elijah" Brass Decorative Manual Old Fashioned Door Bell is a solid brass turn-lever door bell in an Antique Copper finish, with the word "TURN" cast into its rectangular plate. Supplied as one piece, it combines a domed bell decorated with petal and flower motifs on a scaled ground around a polished central boss, fitted with pierced fixing lugs at top and bottom, and a plate with a lever handle and four corner screw holes for ringing the bell by hand.
The bell measures 140mm x 97mm x 63mm and the plate 112mm x 49mm x 37mm. Matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-ELI-DBL-017-BR
"Elohim" Brass Decorative Manual Old Fashioned Door Bell - PT-2
₹3,999/piece
The "Elohim" Brass Decorative Manual Old Fashioned Door Bell - PT-2 is a solid brass mechanical door bell in Satin Brass, with a smooth domed bell and a rectangular key plate cast with the word "TURN". Turning the lever key on the plate rings the bell. It is supplied as one piece with matching screws.
The bell sits on a scrolled ornamental base, and the plate carries a raised scroll pattern with a screw hole in each corner. The bell measures 150mm x 97mm x 37mm, with 106mm hole to hole; the plate measures 89mm x 47 mm x 35mm, with 30mm and 74mm hole to hole. Made in India, with a 5 year warranty.
Catalogue code: SH-ELO-DBL-013-BR-PT-2 (the product label reads "Door Bell-PT-1", SH-ELO-DBL-008-BR-PT-1)
"Elshaddai" Brass Decorative Manual Old Fashioned Door Bell With Lion Key Plate
₹4,500/piece
With an embossed leaf-pattern dome in Antique Copper, the "Elshaddai" is a manual, old-fashioned brass decorative door bell with a lion key plate. Turning the key on the lion plate rings the bell.
Made of solid brass and supplied as one piece with matching screws, it has scrolled mounting flanges and a sculpted lion head. It also comes in Polish Lacquered, Antique Brass, Satin Nickel and Matt Black.
The bell measures 140mm x 97mm x 63mm and the plate 108mm x 68 mm x 58mm, with mounting holes 102mm apart on the bell and 58mm apart on the plate. Made in India, it carries a 5 year warranty.
Catalogue code: SH-ELS-DBL-012-BR
"Elohim" Brass Decorative Manual Old Fashioned Door Bell
₹3,999/piece
The "Elohim" is a solid brass manual door bell with a smooth, plain dome, an old-fashioned decorative design set on an ornate scrolled base and paired with a key plate marked "TURN"; turning the lever rings the bell.
It is supplied as one piece with matching screws, made in India and packed in U P, India, with a 5 year warranty. Polished Lacquered is listed as the displayed finish, while the bell itself has a silver-toned satin look. Satin Nickel, Antique Brass, Antique Copper and Matt Black are also offered.
The bell measures 140mm x 97mm x 63mm and the plate 89mm x 47 mm x 35mm. Hole-to-hole spacing is 106mm on the bell and 30mm by 74mm on the plate.
Catalogue code: SH-ELO-DBL-008-BR
"Sarah" Brass Decorative Manual Old Fashioned Door Bell
₹3,290/piece
The "Sarah" Brass Decorative Manual Old Fashioned Door Bell is a solid brass twist door bell in polished lacquered finish. Turning the lever on its "TURN" plate rings the domed bell through a spindle. The bell carries a raised four-point star and leaf scrollwork.
The bell is listed at 132mm x 95mm x 43mm and marked 140mm x 97mm (5.5 x 3.8 inch), 63mm high, 106mm hole to hole. The plate is 89mm x 47mm, 35mm high, with holes 30mm and 74mm apart. Supplied as one piece with matching screws; finishes are Polished Lacquered, Antique Brass, Antique Copper, Matt Black and Satin Nickel. Made in India, with a 5 year warranty.
Catalogue code: SH-SAR-DBL-005-BR
"Sarah" Brass Decorative Manual Old Fashioned Door Bell With Lion Key Plate
₹4,500/piece
The "Sarah" is a solid brass manual door bell with a lion key plate: a lion-head plate whose lever rings an old-fashioned decorative bell engraved with a star motif and leafy scrolls. The bell sits on a scrolled base with mounting holes at top and bottom.
It is supplied as one piece with matching screws, made in India, with a 5 year warranty. The displayed finish is Satin Nickel; Antique Brass, Antique Copper, Matt Black and Polished Lacquered are also offered.
The bell measures 140mm x 97mm x 63mm, with 102mm hole-to-hole spacing. The lion plate measures 108mm x 68 mm x 58mm, with 58mm hole-to-hole spacing.
Catalogue code: SH-SAR-DBL-009-BR
"Irice" Brass Decorative Manual Old Fashioned Door Bell
₹2,999/piece
The "Irice" manual, old-fashioned brass door bell pairs a smooth decorative dome with a rectangular lever plate trimmed in embossed foliage and column motifs. Turning the lever rings the bell.
Made of solid brass and supplied as one piece with matching screws, it is shown in Antique Copper, with scrolled mounting flanges, and is offered in Polish Lacquered.
The bell measures 140mm x 97mm x 63mm and the plate 108mm x 49mm, with mounting holes 106mm apart on the bell and 57mm apart on the plate. Made in India, it carries a 5 year warranty.
Catalogue code: SH-IRI-DBL-014-BR
"Hezekiah" Brass Decorative Manual Old Fashioned Door Bell
₹3,299/piece
In satin nickel, the "Hezekiah" Brass Decorative Manual Old Fashioned Door Bell is a solid brass twist door bell with a silver-tone patterned dome. Turning the lever on its "TURN" plate rings the bell through a spindle.
The bell is listed at 132mm x 95mm x 43mm and marked 140mm x 97mm (5.5 x 3.8 inch), 63mm high, 106mm hole to hole. The plate is listed at 89mm x 47 mm x 35mm and marked 37mm high, with holes 30mm and 74mm apart. Supplied as one piece with matching screws; finishes are Satin Nickel, Antique Brass, Antique Copper, Matt Black and Polish Lacquered. Made in India, with a 5 year warranty.
Catalogue code: SH-HEZ-DAR-006-BR
"Elohim" Brass Decorative Manual Old Fashioned Door Bell With Lion Key Plate
₹4,500/piece
The "Elohim" brass decorative door bell is a manual, old-fashioned bell with a lion key plate. Turning the key on the lion plate rings the bell.
Made of solid brass and supplied as one piece with matching screws, it is shown in Satin Nickel, with a smooth dome, scrolled mounting flanges and a sculpted lion head. It also comes in Antique Brass, Antique Copper, Matt Black and Polished Lacquered.
The bell measures 140mm x 97mm x 63mm and the plate 108mm x 68 mm x 58mm, with mounting holes 102mm apart on the bell and 58mm apart on the plate. Made in India, it carries a 5 year warranty.
Catalogue code: SH-ELO-DBL-011-BR
"Sarah" Brass Decorative Manual Old Fashioned Door Bell-PT-2
₹4,500/piece
"Sarah" Brass Decorative Manual Old Fashioned Door Bell-PT-2 is a solid brass mechanical door bell in an Antique Copper finish. Supplied as one piece, it pairs a domed bell, cast with a four-point star and scrolling leaf pattern and fitted with pierced fixing lugs at top and bottom, with a rectangular embossed plate carrying a lever handle for ringing the bell by hand.
The bell measures 140mm x 97mm x 63mm (5.5 inch tall, 3.8 inch wide), and the plate 108mm x 49mm (4.2 inch by 1.9 inch) with a 29mm height. Fixing holes sit 106mm apart on the bell and 57mm apart on the plate. Matching screws come with it. Made in India, with a 5 year warranty.
Catalogue code: SH-SAR-DBL-016-BR (also labelled SH-BAR-DBL-016-BR)
"Sharon" Brass Decorative Manual Old Fashioned Door Bell
₹3,999/piece
The "Sharon" is a solid brass decorative manual door bell in an old-fashioned style, with a leaf-and-scroll embossed dome set on an ornate backplate with a screw hole at the top and bottom. A fan-shaped turn handle on a separate decorative plate drives a long square spindle through the door to ring the bell mounted on the inside.
The bell measures 140mm x 97mm x 63mm and the plate 112mm x 49mm x 37mm. The displayed finish is listed as Antique Brass, while the unit itself carries a black finish. Available finishes are Matt Black, Antique Copper, Antique Brass, Polished Lacquered and Satin Nickel. It is supplied as one piece with matching screws, made in India, with a 5 year warranty.
Catalogue code: SH-SHA-DBL-007-BR
"Esther" Brass Decorative Manual Old Fashioned Door Bell
₹3,290/piece
The "Esther" Brass Decorative Manual Old Fashioned Door Bell is a solid brass twist door bell in polished lacquered finish. Turning the lever on its flower-bordered plate rings the floral-relief dome through a spindle.
The bell is listed at 132mm x 95mm x 43mm and marked 140mm x 97mm (5.5 x 3.8 inch), 63mm high, 106mm hole to hole. The plate is listed as 109mm x 47mm 4mm and marked 109mm (4.2 inch) by 47mm, 35mm high, with holes 48mm apart. Supplied as one piece with matching screws; finishes are Polished Lacquered, Antique Brass, Antique Copper, Matt Black and Satin Nickel. Made in India, with a 5 year warranty.
Catalogue code: SH-EST-DBL-002-BR; also marked SH-EST-DAR-002-BR
"Elshaddai" Brass Decorative Manual Old Fashioned Door Bell
₹3,299/piece
The "Elshaddai" is a solid brass manual door bell in Antique Copper, an old-fashioned decorative bell worked by a fan-shaped turn knob on a long engraved key plate. Its dome is covered in raised leaf and bead patterns around a central nut, over a ribbed skirt and scrolled base, and a rod links the knob to the bell.
It is supplied as one piece with matching screws, made in India, with a 5 year warranty. Antique Copper is the displayed finish; Antique Brass, Matt Black, Polished Lacquered and Satin Nickel are also offered.
The bell measures 140mm x 97mm x 63mm. The plate measures 114mm x 47mm, marked 35mm height at the knob. Hole-to-hole spacing is 106mm on the bell and 70mm on the plate.
Catalogue code: SH-ELS-DBL-003-BR
"Bartimeus" Brass Decorative Manual Old Fashioned Door Bell
₹3,299/piece
The "Bartimeus" Brass Decorative Manual Old Fashioned Door Bell is a solid brass twist door bell, displayed in antique copper. Turning the lever on its "TURN" plate rings the bell, whose dome carries a raised petal pattern.
The bell is listed at 132mm x 95mm x 43mm and marked 140mm x 97mm (5.5 x 3.8 inch), 63mm high, 106mm hole to hole. The plate is listed at 89mm x 47 mm x 35mm and marked 37mm high, with holes 30mm and 74mm apart. Supplied as one piece with matching screws; finishes are Antique Copper, Satin Nickel, Matt Black, Polished Lacquered and Antique Brass. Made in India, with a 5 year warranty.
Catalogue code: SH-BAR-DBL-001-BR
"Hosanna" Brass Decorative Manual Old Fashioned Door Bell
₹3,290/piece
The "Hosanna" is a solid brass decorative manual old-fashioned door bell, its name taken from the Holy Bible and meaning "blessed is he who comes in the name of the Lord".
Described as a golden finish with an antique look, with the displayed finish listed as Antique Copper, it goes well with most doors, works smoothly and rings very loud, heard from a long distance. Antique Brass, Polished Lacquered, Matt Black and Satin Nickel finishes let it match the door colour.
The bell measures 140mm x 97mm x 63mm with 106mm hole to hole; the turn-handle plate measures 112mm x 49mm x 37mm with 43mm hole to hole. It is supplied as one piece with matching screws, made in India, with a 5 year warranty.
Catalogue code: SH-HOS-DBL-004-BR
"Sanna" Hand Forged Iron Hanging Bell
₹2,199/piece
"Sanna" Hand Forged Iron Hanging Bell is a wrought iron antique-style door bell in a Black Powder Coated finish, made to hang indoors or outdoors. It is made from hand forged iron with a rust-resistant coating, which makes it durable and weatherproof, and it is easy to self-install.
A sun-like spiral bracket with curled scroll rays holds a cone-shaped bell with a hammered texture, hung from a forged loop, with a white braided rope pull below. As a calling hand bell for the home, it brings style and function together.
Supplied as one piece with matching screws. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-SAN-HBL-001-IR
"Sharon" Brass Decorative Manual Old Fashioned Door Bell With Lion Key Plate
₹4,500/piece
The "Sharon" pairs a lion-head key plate with a solid brass manual door bell, its dome engraved with radiating leaf and scroll panels around a central nut in an old-fashioned decorative design on a scrolled base. Turning the lever below the lion's head rings the bell.
It is supplied as one piece with matching screws, made in India, with a 5 year warranty. The displayed finish is Satin Nickel; Antique Brass, Antique Copper, Matt Black and Polished Lacquered are also offered.
The bell measures 140mm x 97mm x 63mm, with 102mm hole-to-hole spacing. The lion plate measures 108mm x 68 mm x 58mm, with 58mm hole-to-hole spacing.
Catalogue code: SH-SHA-DBL-010-BR; the product marking reads SH-SHA-DBL-007-BR
"Irice" Brass Decorative Manual Old Fashioned Door Bell-PT-2
₹3,999/piece
The "Irice" Brass Decorative Manual Old Fashioned Door Bell-PT-2 comes in a Black Powder Coated finish over solid brass, with a smooth domed bell and a tall rectangular key plate. Turning the lever key on the plate rings the bell. It is supplied as one piece with matching screws.
The bell sits on an ornate scrolled base with screw holes at top and bottom, and the plate is cast with leaf motifs at each end and column details beside the key. The bell measures 150mm x 97mm x 37mm, with 106mm hole to hole; the plate measures 108mm x 49mm, with a 29mm height and 57mm hole to hole. Made in India, with a 5 year warranty.
Catalogue code: SH-IRI-DBL-015-BR
Cylinder Pull2 products
“Abijam” Iron Cylinder Pull
₹365/piece
The "Abijam" iron cylinder pull is an antique-style cast iron piece that combines a door pull with a swivelling cover for a cylinder lock, topped by a fleur-de-lis crest.
Supplied as one piece with matching screws, it is shown in Black Powder Coated with a hammered texture, and also comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Overall dimensions are 133mm x 60mm x 17mm, with fixing holes 66mm apart lengthwise and 40mm apart across. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-ABI-CYL-001-IR
"Berachiah" Antique Cast Iron Cylinder Pull
₹155/piece
"Berachiah" Antique Cast Iron Cylinder Pull is a rectangular cast iron cylinder pull in a Black Powder Coated finish. A cylinder pull surrounds a door's cylinder lock and gives a finger grip for pulling the door.
The plate has an all-over hammered texture, a large round cylinder opening, four corner screw holes and a curved pull lip along the lower edge. Supplied as one piece with matching screws. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-BER-CYL-002-IR
Door Studs And Nails Domes15 products
"Cross" Black Antique Iron Door Stud
₹103/piece
The "Cross" Black Antique Iron Door Stud is a wrought iron decorative stud shaped as a cross, made for adding an ornamental accent to doors. Three arms end in rounded, domed caps, and the long fourth arm tapers to a sharp point that fixes into the door.
The finish is black powder coated. Each stud is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India.
Catalogue code: SH-CRO-STU-007-IR
19mm Amalek Brass Round Stud
₹50/piece
19mm “Amalek” Brass Round Stud in a Satin Brass finish: a compact solid brass decorative door stud. Domed studs like this are fixed to doors to give them a classic studded look.
The round dome head has a brushed, matt golden surface and stands on a single flat, tapered spike. Overall dimensions are 19mm x 28mm. It is supplied as one piece with matching screws and carries a 5 year warranty. Country of origin is India.
Catalogue code: SH-AMA-STU-007-IR
25mm “Amalek” Brass Round Stud
₹55/piece
25mm “Amalek” Brass Round Stud: a solid brass decorative door stud with a 25mm round dome head. Domed studs like this are fixed to doors to give them a classic studded look.
The golden, hollow dome head sits on a single tapered, pointed spike. The finish is Polished Lacquered, offered as the Polish Lacquered finish. Overall dimensions are 25mm x 31mm, which is 1 inch across the head and 1.22 inch tall. It is supplied as one piece with matching screws and carries a 5 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-AMA-STU-003-IR
31mm "Umbrella" Black Antique Iron Door Stud
₹156/piece
This 31mm "Umbrella" Black Antique Iron Door Stud has a rounded, umbrella-like dome head with soft ribbed segments, cast in iron to decorate doors with a classic studded pattern.
The dome is 31mm across and 19mm deep and sits on a 28mm threaded screw shank, giving overall dimensions of 42mm x 31mm, with the overall length marked 42mm = 1.6 Inch. The finish is black powder coated. Each stud is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-BAR-STU-002-IR
"Small Cross Sign" Black Antique Iron Door Stud
₹99/piece
Smaller in form, the "Small Cross Sign" Black Antique Iron Door Stud is a wrought iron stud in the shape of a cross, for decorating doors. Its three short arms end in rounded, domed caps, and the lower arm tapers to a point that fixes into the door.
The finish is black powder coated. Each stud is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-SCS-STU-008-IR
22mm "Barak" Black Antique Iron Door Stud
₹84/piece
The 22mm "Barak" Black Antique Iron Door Stud is a cast iron decorative stud for doors. Its square pyramid head has a hammered, dimpled texture and sits on a threaded screw shank, fixing into the door face for a traditional studded look.
The finish is black powder coated, and the stud is also offered in Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered. Overall dimensions are 22mm x 32mm: a 22mm head, 13mm deep, on an 18mm shank, for a 32mm overall length. Each stud is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-BAR-STU-001-IR
38mm “Amalek” Brass Round Stud
₹109/piece
Measuring 38mm across its round dome, the 38mm “Amalek” Brass Round Stud is a solid brass decorative door stud. Domed studs like this are fixed to doors to give them a classic studded look.
A golden, hollow dome head sits on a single tapered, pointed spike, finished in Polished Lacquered (offered as Polish Lacquered). Overall dimensions are 38mm x 35mm, which is 1.50Inch across the head and 1.38 Inch tall. The stud is supplied as one piece with matching screws and carries a 5 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-AMA-STU-005-IR
30mm "Bashemath" Black Antique Iron Door Stud
₹80/piece
The 30mm "Bashemath" Black Antique Iron Door Stud is a cast iron decorative door stud with a square, four-sided pyramid head and a pin shank, finished in matte-look black powder coat.
Overall dimensions are 30mm x 30mm (30mm = 1.1 inch per side). The head has a 12mm thickness, and the stud measures 38mm = 1.4 inch from the peak of the head to the pin tip. It is supplied as one piece with a matching screw and carries a 2 year warranty. Made in India.
Catalogue code: SH-BAS-STU-013-IR
"Chenani" Decorative Black Iron Door Stud
₹450/piece
The "Chenani" Decorative Black Iron Door Stud is a large cast iron door ornament shaped as a four-armed cross, each arm built from rounded lobes that end in a point. The front has a hammered, textured face in black powder coated finish, and the flat back has a single central hole.
Overall dimensions are 144mm x 144mm (144mm = 5.6 inch each way), with a 16mm height. It is supplied as one piece with matching screws and carries a 2 year warranty. Made in India.
Catalogue code: SH-CHE-DEC-STU-014-IR
"Careah" Black Antique Iron Door Stud
₹55/piece
The "Careah" Black Antique Iron Door Stud is a cast iron decorative stud for doors, with a round, domed head in black powder coated finish. The head has a hammered, faceted texture and sits on a single pointed nail shank.
Overall dimensions are 32mm x 30mm x 9mm: the head measures 30mm = 1.1 inch across and 9mm in height, and the stud stands 32mm = 1.2 inch tall including the shank. It is supplied as one piece with matching screws and carries a 2 year warranty. Made in India and packed in Uttar Pradesh.
Catalogue code: SH-CAR-STU-010-IR
20mm "Cornelius " Black Antique Iron Door Stud
₹45/piece
The 20mm "Cornelius" Black Antique Iron Door Stud is a cast iron decorative door stud with a faceted, geometric block head and a threaded screw shank, finished in black powder coat.
Overall dimensions are 20mm x 20mm. The head measures 20mm = 0.7 inch across, and the stud measures 34mm = 1.3 inch overall including the screw shank. It is supplied as one piece with matching screws and carries a 2 year warranty. Made in India and packed in Uttar Pradesh.
Catalogue code: SH-COR-STU-011-IR
32mm “Amalek” Brass Round Stud
₹75/piece
32mm “Amalek” Brass Round Stud is a solid brass decorative door stud with a 32mm round dome head. Domed studs like this are fixed to doors to give them a classic studded look.
Its golden, hollow dome head is set on a single tapered, pointed spike, in a Polished Lacquered finish (offered as Polish Lacquered). Overall dimensions are 32mm x 38mm, which is 1.25 Inch across the head and 1.50 Inch tall. Supplied as one piece with matching screws, it carries a 5 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-AMA-STU-004-IR
50mm "Amalek" Brass Round Stud
₹205/piece
With a broad 50mm round dome head, the 50mm “Amalek” Brass Round Stud is a solid brass decorative door stud. Domed studs like this are fixed to doors to give them a classic studded look.
Its golden, hollow dome head sits on a single tapered, pointed spike, in a Polished Lacquered finish (offered as Polish Lacquered). Overall dimensions are 50mm x 48mm, which is 2 Inch across the head and 1.88 Inch tall. It is listed as the 50mm size; its printed product label reads 38mm “Amalek” Brass Round Stud with the same code. Supplied as one piece with matching screws, it carries a 5 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-AMA-STU-006-IR
38mm "Chilion" Black Antique Iron Door Stud
₹89/piece
The 38mm "Chilion" Black Antique Iron Door Stud is a cast iron decorative door stud with a square head shaped into a cross by curved notches on all four sides, a raised square centre and a pin shank. The black powder coated finish has a smooth, glossy look.
Overall dimensions are 38mm x 38mm (38mm = 1.4 Inch per side), and it measures 32mm = 1.2 inch from the face of the head to the pin tip. It is supplied as one piece with a matching screw and carries a 2 year warranty. Made in India and packed in Uttar Pradesh.
Catalogue code: SH-CHI-STU-012-IR
38mm "Bashemath" Black Antique Iron Door Stud
₹232/piece
The 38mm "Bashemath" Black Antique Iron Door Stud has a large square pyramid head with clean, smooth facets, cast in iron for a bold studded pattern on doors. A slim nail pin under the head fixes it into the door.
The head measures 38mm x 38mm, marked 38mm = 1.4 inch, and the stud is 50mm = 1.9 inch overall including the pin. The finish is black powder coated, and the stud is also offered in Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered. Each stud is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-BAS-STU-009-IR
Handrail Brackets4 products
"Nahaliel" Cast Iron Handrail Bracket
₹530/piece
"Nahaliel" Cast Iron Handrail Bracket in black powder coat, a one-piece cast iron bracket that holds a handrail off the wall. Overall dimensions are 79mm x 55mm x 81mm.
A curved round arm, 10mm thick, rises from a round wall plate with three countersunk screw holes to a rectangular rail plate with two. The rail plate measures 49mm by 20mm with holes 31mm apart, and the wall plate is 55mm across with holes 33mm apart.
It comes with matching screws and a 2 year warranty, made in India.
Catalogue code: SH-NAH-BRA-004-IR
"Mary" Heavy Cast Iron Handrail Bracket
₹438/piece
"Mary" Heavy Cast Iron Handrail Bracket with a textured black powder-coated finish, a one-piece bracket for fixing a handrail to a wall. It is named as cast iron, and its material is listed as wrought iron.
A thick tapered arm joins a round wall plate with three countersunk screw holes to a rectangular rail plate with two. Overall dimensions are 67mm x 59mm x 78mm: the rail plate is 59mm wide, the bracket measures 67mm along its length and 78mm in height.
It comes with matching screws and a 2 year warranty, made in India and packed in U P, India. Finishes offered: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-MAR-HVY-BRA-003-IR
"Martha" MS Handrail Bracket
₹205/piece
"Martha" MS Handrail Bracket in black powder-coated iron, a one-piece wall bracket for holding a stair or wall handrail. Overall dimensions are 78mm x 61mm x 48mm.
A bent round-rod arm, 10mm thick, links a round wall plate with three screw holes to a flat, rounded rail plate drilled for screws. The rail plate measures 61mm across, the wall plate 60mm, and the screw holes sit 35mm apart on both plates. The arm gives a 48mm reach between the plates.
It comes with matching screws and a 2 year warranty, made in India and packed in U P, India. Finishes offered: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered and White Powder Coated.
Catalogue code: SH-MAR-BRA-001-IR
"Maranatha" MS Handrail Bracket
₹229/piece
"Maranatha" MS Handrail Bracket in white powder-coated iron, a one-piece wall bracket that carries a stair or wall handrail. Overall dimensions are 61mm x 78mm.
A smooth white curved arm, 10mm thick, joins a round wall plate with three screw holes to a flat oblong rail plate with two screw holes. The rail plate is 61mm wide and the wall plate 61mm across, with screw holes 35mm apart. The reach between the plates is marked 48mm = 2.3 inch.
Matching screws and a 2 year warranty come with it; it is made in India and packed in U P, India. Finishes offered: White Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered and Black Powder Coated.
Catalogue code: SH-MAR-BRA-002-IR
Door Stoppers2 products
"Segub" Iron Door Stopper
₹634/piece
The "Segub" door stopper is a satin nickel finish door stop that holds a door open. It is named as an iron door stopper and listed as made of solid brass.
It has a triangular mounting plate with three screw holes, a hinged arm and a black tip at the foot. Supplied as one piece with matching screws, it carries a 5 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-SAG-DSTP-002-IR
"Salmon" Brass Door Stopper
₹615/piece
"Salmon" Brass Door Stopper in solid brass with a satin nickel finish, a one-piece stopper for holding a door open.
A slim angled arm runs from a screw-on mounting plate with four screw holes, joined at a rounded knuckle, down to a rounded foot capped with a black tip. The satin nickel surface has a soft brushed sheen.
It comes with matching screws and a 5 year warranty, made in India and packed in U P, India.
Catalogue code: SH-SAL-DSTP-001-BR
Key Hole Covers Escutcheons4 products
"Felix" Iron Escutcheon
₹95/piece
Round with a rope-twist border, the "Felix" iron escutcheon is a cast iron keyhole cover in a black powder coated finish that finishes the keyhole of a door lock.
A raised inner ring frames the keyhole cut-out, with a screw hole on each side. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-FEL-ESC-004-IR
"Ehi" Iron Escutcheons
₹75/piece
A cast iron keyhole escutcheon with an oval cover, the "Ehi" Iron Escutcheons comes in a black powder coated finish and covers and finishes the keyhole of a door lock.
The textured rectangular plate has a keyhole slot with a screw hole on each side, and the hammered oval cover sits above the keyhole. Overall dimensions are 45mm x 30mm x 12mm. The oval cover measures 40mm across, the keyhole 20mm, and the screw holes sit 18mm apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-EHI-ESC-002-IR
"Eber" Iron Escutcheon
₹65/piece
The "Eber" iron escutcheon is an oval cast iron keyhole cover in a black powder coated finish that frames and finishes the keyhole of a door lock.
The plate has a hammered, textured face, a keyhole cut-out and two recessed screw holes. Overall dimensions are 49mm x 33mm x 3.5mm, with 35mm hole to hole and a 22mm key hole. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-EBE-ESC-001-IR
"Elath" Iron Escutcheon
₹165/piece
Rectangular with four corner screw holes, the "Elath" iron escutcheon is a cast iron keyhole plate in a black powder coated finish that frames the keyhole of a door lock.
The hammered, textured plate has a large cut-out with a round top and a long rounded slot below. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; packed in U P, India.
Catalogue code: SH-ELA-ESC-003-IR
Hinges84 products
5.7 inch"Abdias" Black Antique Iron False Hinge
₹99/piece
5.7 inch"Abdias" Black Antique Iron False Hinge: a cast iron decorative strap that gives a door, cabinet or gate the look of a strap hinge. It is supplied as one piece in a black powder-coated finish, with matching screws.
Overall dimensions are listed as 146mm 42mm x 5mm. The hammered strap has a flared end 39mm wide with two screw holes, a centre hole and a spear tip 42mm across with one more hole. Hole spacing is 21mm across the end, 68mm to the centre hole and 114mm to the tip hole.
Made in India, with a 2 year warranty.
Catalogue code: SH-ABD-HNG-076-IR
"Ibri" Black Antique Iron False Hinge Front
₹213/piece
The 12" "Ibri" Black Antique Iron False Hinge Front is a cast iron false hinge for dressing the face of a door, finished in Black Powder Coated. Fixed to the front of a door, it gives the look of a traditional strap hinge. The "Ibri" pairs a narrow straight strap with a flared T-shaped end and a pointed spade tip, all in a hammered black texture with three screw holes. It is supplied as one piece with matching screws, is made in India and carries a 2 year warranty.
Catalogue code: SH-IBR-HNG-039-IR
"Leshem" Black Antique Iron False Hinge Front
₹1,076/piece
"Leshem" Black Antique Iron False Hinge Front is a cast iron decorative T-strap that gives a door, cabinet or gate the look of a traditional strap hinge. Its wide end is cut into two curled, flame-like scrolls, and the strap ends in a barbed spear point, with six screw holes in all.
It is cast in one piece in a black powder coated finish and comes with matching screws. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-LES-HNG-049-IR
"Lemuel" Black Antique Iron Butterfly Cabinet Hinge
₹109/piece
A compact wrought iron butterfly hinge for cabinet doors, the "Lemuel" Black Antique Iron Butterfly Cabinet Hinge measures 72mm x 45mm x 9mm overall and is supplied as one piece with matching screws.
Its two wavy, scalloped leaves end in pointed tips, carry a textured surface and have four screw holes each around a central knuckle. Marked spacings are 28mm hole to hole across the leaves, and 53mm and 18mm hole to hole along each leaf.
The finish displayed is Black Powder Coated, with Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered also offered. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-LEM-HNG-013-IR
14 inch "Luhith" Black Antique Iron False Hinge Front
₹526/piece
The 14 inch "Luhith" Black Antique Iron False Hinge Front is the 14" cast iron version of this decorative door strap-hinge front, in Black Powder Coated. A false hinge front fixes to the face of a door or cabinet for the look of a traditional strap hinge.
It measures 355mm = 14 inch long and 5mm thick. The T-shaped end is marked 87mm Width on one drawing and 88mm on another. The hammered-texture strap tapers to a diamond spear tip 52mm wide, with four screw holes: two in the end, 39mm apart, and two along the strap 156mm = 6.1 inch apart.
It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-LUH-HNG-053-IR
"Jaazaniah" Black Antique Iron Dummy Corner Door Strap/L-Bracket
₹745/piece
The "Jaazaniah" dummy corner door strap is a black antique cast iron L-bracket, a decorative corner piece for doors with curled scrolls along both arms. Finished in black powder coat with a textured, antique-look surface, it has paired scroll curls on each arm, a large scroll at the outer corner, lobed tips and screw holes along both arms.
It is supplied as one piece with matching screws. Overall dimensions are 210mm x 212mm x 5mm (8.2in x 8.3in), with marked spacings of 145mm, 101mm, 98mm and 148mm between screw holes. Country of origin is India, and it comes with a 2 year warranty.
Catalogue code: SH-JAA-HNG-057-IR
"Tobias" Black Antique Iron Tee Hinge
₹325/piece
The "Tobias" Black Antique Iron Tee Hinge is a wrought iron T-hinge for hanging doors, supplied as one piece with matching screws. It measures 150mm x 58mm x 11mm overall (5.9 inch long).
A lobed leaf beside an exposed knuckle leads into a strap ending in a spear-shaped tip with a raised teardrop, in a textured antique surface. Screw holes are spaced 108mm, 68mm and 33mm apart.
The finish displayed is black powder coated; Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered are also offered. It is made in India, packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-TOB-HNG-014-IR
4x4 inch "Bethel" Black Antique Iron Decorative Hinge
₹505/piece
The 4x4 inch "Bethel" Black Antique Iron Decorative Hinge is a wrought iron hinge with two square leaves, embossed with leafy scrollwork on a cross-hatched ground. Its decorated knuckle ends in steeple-shaped finials top and bottom, and each leaf has three screw holes.
Overall dimensions are 175mm x 102mm x 13mm, with 89mm between the outer screw holes on each leaf. It is supplied as one piece with matching screws, made in India and backed by a 2 year warranty. The finish shown is Black Powder Coated; it is also offered in Natural Iron Lacquered, Natural Iron Unlacquered, Matt Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BET-HNG-071-IR
"Kirioth" Black Antique Iron Butterfly Cabinet Hinge
₹125/piece
The "Kirioth" black antique iron butterfly cabinet hinge is made of wrought iron in a Black Powder Coated finish and measures 89mm x 59mm x 10mm overall (89mm = 3.5 inch length). It lets a cabinet or cupboard door swing open and shut on a central knuckle.
Each leaf has a scrolled, curling outline with a hammered texture and four screw holes. The holes sit 33mm apart across the two leaves at top and bottom; on each leaf the inner holes are 23mm apart and the outer holes 71mm apart. The hinge is supplied as one piece with matching screws, made in India, packed in U P, India, and backed by a 2 year warranty.
Catalogue code: SH-KIR-HNG-047-IR
3 Inch "Bethel" Black Antique Iron Decorative Hinge
₹406/piece
The 3 Inch "Bethel" Black Antique Iron Decorative Hinge is a wrought iron cabinet hinge in Black Powder Coated finish. Raised scrollwork on a crosshatched ground covers both leaves, each with three screw holes, and the patterned knuckle ends in steeple finials.
It comes as one piece with matching screws and a 2 year warranty, and is made in India. Overall dimensions are listed as 150mm x 83mm x 13mm; the dimension marks read 105mm = 5.9 inch overall height and 85mm = 3.3 inch leaf height.
Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BET-HNG-017-IR
"Mishael" Black Antique Iron Butterfly Cabinet Hinge
₹245/piece
The "Mishael" Black Antique Iron Butterfly Cabinet Hinge is a cast iron butterfly hinge for cabinet doors, finished in black powder coat. Each wing has a scalloped outline with pointed side tips, a hammered texture and five screw holes, set either side of a central knuckle and pin.
Overall dimensions are 111mm x 75mm x 13mm, with a 4mm plate thickness and screw holes spaced 58mm and 44mm apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Made in India and packed in Uttar Pradesh, India. Available finish: Black Powder Coated.
Catalogue code: SH-MIS-HNG-064-IR
"Jahaziah" Black Antique Iron Dummy Corner Door StrapL-Bracket
₹745/piece
The "Jahaziah" dummy corner door strap is a black antique cast iron L-bracket whose arms carry flame-like, trident-style points, a decorative corner piece for doors. It is finished in black powder coat with a textured surface, and has a curled scroll at the outer corner, lobed tips and screw holes along both arms.
It is supplied as one piece with matching screws and measures 210mm x 212mm x 5mm overall. Country of origin is India, and it comes with a 2 year warranty.
Catalogue code: SH-JAH-HNG-058-IR
18 inch "Jakim" Black Antique Iron False Hinge Front
₹947/piece
The 18 inch "Jakim" Black Antique Iron False Hinge Front is a long wrought iron false hinge for the face of a door, shown in Black Powder Coated. Fixed to the front of a door, it adds the look of a traditional strap hinge. Its tapering strap ends in a spear tip with two scroll curls at one end and a pair of scroll curls at the base, in a matt black textured finish. It measures 18" overall (457mm = 18 inch) and 91mm across the scrolls. It is also offered in Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-18inch-JAK-HNG-040-IR
"Hazeroth" Black Antique False Hinge
₹615/piece
The "Hazeroth" Black Antique False Hinge, also called the "Hazeroth" Black Antique Iron Hinge, is a decorative wrought iron strap hinge front that gives a door a traditional ironwork look. It comes as one piece with matching screws.
A spear-shaped head tops a tapering hammered-texture strap that ends in two curled arms over a squared foot, with three screw holes. It measures 300mm x 135mm x 6mm overall (300mm = 11.8 inch), with holes spaced 113mm = 4.4 inch and 226mm = 8.8 inch from the top hole.
Finish displayed: Black Powder Coated. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-HAZ-HNG-32-IR
"Jetheth" Black Antique Iron Front False Hinge
₹275/piece
The "Jetheth" Black Antique Iron Front False Hinge is a compact 6.5" cast iron false hinge for the face of a door, shown in Black Powder Coated. Fixed to the front of a door, it gives the look of a traditional strap hinge. A tapered strap widens to a square end and finishes in a fleur-de-lis tip with two curved arms, in a hammered black texture with five screw holes. It measures 165mm = 6.5inch long, 39mm across the square end and 66mm across the arms, with a section marked 5.8mm. It is also offered in Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-JAT-HNG-042-IR
12inch "Eliah" Black Antique Iron Tee Hinge
₹875/piece
12inch "Eliah" Black Antique Iron Tee Hinge, a long cast iron T-hinge with a spear-tipped strap and a lobed, flower-like leaf for hanging a door or gate. It is supplied as one piece in black powder coated finish with matching screws, and carries a 2 year warranty.
The surface has a pebbled, hammered texture. Overall dimensions are 332mm X 134mm X 12mm (332mm = 13 inch; 12mm height), and the spear tip measures 50mm across. Marked hole spacings include 249mm = 9.8 inch, 124mm = 4.8 inch, 95mm and 32mm. Country of origin India; packed in U P, India.
Catalogue code: SH-12inch-ELI-HNG-035-IR
"Eliphaz" Black Antique Iron Tee Hinge
₹539/piece
The "Eliphaz" Black Antique Iron Tee Hinge is a cast iron T hinge for doors with a rectangular leaf and a spade-shaped strap end, 235mm x 101mm x 13mm overall. It is supplied as one piece with matching screws.
The finish displayed is black powder coated over a textured surface. The strap is 4mm in thickness, and the leaf's outer screw holes sit 73mm = 2.8 inch apart.
It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Country of origin is India, and it carries a 2 year warranty.
Catalogue code: SH-ELI-HNG-004-IR
4.5 Inch "Rapha" Black Antique Iron H Cabinet Hinge
₹287/piece
The 4.5 inch "Rapha" black antique iron H cabinet hinge is a cast iron H-pattern hinge for hanging cabinet doors, catalogue code SH-RAP-HNG-068-IR.
Two tall, flared leaves meet at a central knuckle, and each leaf carries three countersunk screw holes. The hammered, textured surface has a black powder coated finish. It is supplied as one piece with matching screws, made in India and backed by a 2 year warranty.
Overall dimensions are listed as 155mm x 56mm x 10mm; the dimension drawing reads 115mm = 4.5 inch long, 56mm = 2.2 inch wide and 10mm Height. The drawing also marks 86mm Hole to Hole, 43mm Hole to Hole, 22mm across one leaf and 4.5 Thickness.
Catalogue code: SH-RAP-HNG-068-IR
"Jehezekel" Black Antique Iron Dummy Corner Door Strap/L-Bracket
₹745/piece
The "Jehezekel" dummy corner door strap is a black antique cast iron L-bracket that pairs flame-shaped points near each tip with curled scrolls closer to the corner, a decorative corner piece for doors. Finished in black powder coat with a textured surface, it has a large scroll at the outer corner, lobed tips and screw holes along both arms.
It is supplied as one piece with matching screws. Overall dimensions are 210mm x 212mm x 5mm (8.2in x 8.3in), with marked spacings of 145mm, 101mm, 98mm and 148mm between screw holes. Country of origin is India, and it comes with a 2 year warranty.
Catalogue code: SH-JAH-HNG-059-IR
4x4 inch "Carmel" Black Antique Iron Decorative Hinge
₹505/piece
The 4x4 inch "Carmel" Black Antique Iron Decorative Hinge is a wrought iron hinge whose square leaves carry swirling scroll relief on a textured ground. A patterned knuckle runs between them, capped with steeple-shaped finials at each end, and each leaf has corner and inner screw holes.
Overall dimensions are 166mm x 102mm x 13mm, with a 4.5 mm leaf thickness and 84mm hole-to-hole spacing. It is supplied as one piece with matching screws, made in India and carries a 2 year warranty. Available finish: Black Powder Coated.
Catalogue code: SH-CAR-HNG-073-IR
Showing 20 of 84 in Hinges
Show 20 moreSign Plates14 products
"Jesus Cross" Brass Door Sign
₹965/piece
"Jesus Cross" brass door sign in a polished lacquered gold finish, cast in solid brass and measuring 249mm x 170mm x 4mm (249mm = 9.8 inch tall, 170mm = 6.69 inch wide). It adds a nice touch to a community and suits homes, church, altar, offices, shops or restaurants. The cross has rounded trefoil-style ends and a smooth, bright surface, with two mounting holes, one at the top and one at the foot, 212mm = 8.34 inch apart; each arm end is 34mm across.
Its vintage antique design is authentic, durable and sturdy, and it suits mounting on doors. It is supplied as one piece with matching brass screws for wooden and wall surfaces; metal surfaces need other suitable screws. To fit, mark and drill pilot holes to suit the screws, add a few drops of oil to the thread and tighten with care, since over-torquing may break the screw. The finish is listed as Polished Lacquered and also as Polish Lacquered. Made in India, with a 5 year warranty.
Catalogue code: SH-JES-CRO-SGH-010-BR (the label reads SH-JES-CRO-SGH-009-BR)
"Private" Brass Door Sign
₹855/piece
"Private" brass door sign in Satin Nickel, a solid brass plate that marks a door as private. The word PRIVATE stands out in raised capitals against a textured silver-tone background, framed by a border with notched corners and a rounded screw-hole tab at either end.
Supplied as one piece with matching screws, it measures 191mm x 64mm overall (7.5 inch x 2.5 inch) and is 5mm thick, with 160mm hole to hole for fixing. Country of origin is India, and it carries a 5 year warranty.
Catalogue code: SH-PVT-SGN-004-BR
"Beware" Of The Dog Brass Door sign
₹955/piece
"Beware" Of The Dog brass door sign in a satin nickel finish, measuring 191mm x 64mm x 5mm, made to warn visitors at a door that a dog is on the premises. Raised "BEWARE OF THE DOG" lettering in two lines stands out on a darkened, stippled centre panel, framed by a plain bright border with a rounded tab at each end holding one screw hole.
Cast in solid brass, it is supplied as one piece with matching screws, made in India and backed by a 5 year warranty.
Catalogue code: SH-BOTD-SGN-011-BR
"No Smoking" Brass Door sign
₹1,780/piece
"No Smoking" brass door sign for marking a smoke-free room or area, made of solid brass in an Antique Copper finish. The raised serif letters "NO SMOKING" sit on a dark textured background inside a plain rectangular border, with a small screw hole near each end for fixing. It measures 241mm x 42mm x 5mm overall, is supplied as one piece with matching screws, and is made in India with a 5 year warranty.
Catalogue code: SH-NOS-SGN-014-BR
"Push" Brass Door sign
₹855/piece
"Push" brass door sign in Antique Brass, an upright solid brass plate that marks the push side of a door. Raised capitals spell PUSH from top to bottom over a textured background, set inside a framed border with a rounded screw-hole tab at each end.
The sign comes as one piece with matching screws. It measures 191mm x 64mm overall, standing 7.5 inch tall and 2.5 inch wide, with a 5mm thickness and 160mm hole to hole. Country of origin is India, and a 5 year warranty applies.
Catalogue code: SH-PUS-SGN-006-BR
"Toilet" Brass Door Sign
₹885/piece
"Toilet" brass door sign in an Antique Brass finish, a solid brass plate for marking a toilet or washroom door. Raised capital letters spell TOILET across a textured background inside a framed border, and a rounded tab with a screw hole sits at each end.
The sign is supplied as one piece with matching screws. It measures 191mm x 64mm overall (7.5 inch x 2.5 inch), is 5mm thick and has 160mm hole to hole for fixing. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 5 year warranty.
Catalogue code: SH-TLT-SGN-002-BR
"Large Bathroom" Decorative Brass Sign Plate
₹2,975/piece
"Large Bathroom" decorative brass sign plate for bathroom doors, cast in solid brass in an antique copper finish and measuring 293mm x 64mm x 7mm (293mm = 11.5 inch long, 64mm = 2.52 inch high). Copper-toned raised "BATHROOM" lettering stands out on a dark textured panel framed by scrolled, pointed ends, an antique design that adds a nice touch to homes and offices.
Durable and sturdy, the plate has an authentic vintage look in a brown finish and suits doors at residences, offices, shops or restaurants. Four mounting holes are set 203mm hole to hole along the length and 30mm hole to hole across. Thickness is listed as 7mm; the label reads 6.8mm Thickness.
It comes as one piece with matching screws for wooden surfaces; metal surfaces need other suitable screws. On wood, mark and drill pilot holes to suit the screws, put a few drops of oil on the thread, then tighten with care, since over-torquing may break the screw. Made in India, with a 5 year warranty.
Catalogue code: SH-BAT-SGN-009-BR
"Pull" Brass Door Sign
₹855/piece
"Pull" brass door sign in Antique Copper, a vertical solid brass plate that tells people which way to open a door. The letters P-U-L-L run top to bottom in raised capitals on a pebbled background inside a framed border, with a rounded screw-hole tab at the top and bottom.
It is supplied as one piece with matching screws. Overall dimensions are 191mm x 64mm: 7.5 inch tall and 2.5 inch wide, 5mm thick, with 160mm hole to hole. Country of origin is India, and it carries a 5 year warranty.
Catalogue code: SH-PUL-SGN-005-BR
"Dog Please Closed The Gate" Brass Door Sign
₹2,650/piece
"Dog Please Closed The Gate" brass door sign, a solid brass gate plate in a Satin Nickel finish that reminds visitors to close the gate. The plate itself reads "DOGS PLEASE CLOSE THE GATE" in two lines of raised capital letters on a textured background within a framed border, with a rounded tab and screw hole at each end. Overall dimensions are 279mm x 56mm x 5mm. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Catalogue code: SH-DPCG-SGN-013-BR
"Ladies" Brass Door Sign
₹855/piece
"Ladies" brass door sign in a silver-tone nickel finish, made of solid brass for marking a ladies' toilet or room door. The finish is listed as Antique Brushed Nickel, and the available finish is Satin Nickel. Raised capital letters spell LADIES over a textured background within a framed border, with a rounded screw-hole tab at each end.
It comes as one piece with matching screws and measures 191mm x 64mm overall (7.5 inch x 2.5 inch), 5mm thick, with 160mm hole to hole. Country of origin is India, and it is packed in Uttar Pradesh, India. A 5 year warranty applies.
Catalogue code: SH-LAD-SGN-003-BR
"Gents" Brass Door sign
₹955/piece
"Gents" brass door sign for marking a men's washroom or restroom door, made of solid brass in an Antique Brass finish. The raised capital letters "GENTS" stand out against a textured background inside a framed border, and a rounded tab at each end carries a screw hole for fixing. It measures 191mm x 64mm x 5mm overall, is supplied as one piece with matching screws, and is made in India with a 5 year warranty.
Catalogue code: SH-GEN-SGN-012-BR
"Large Toilet" Decorative Brass Sign Plate
₹2,975/piece
"Large Toilet" decorative brass sign plate for toilet doors, cast in solid brass in an antique brass finish and measuring 293mm x 64mm x 7mm (293mm = 11.5 inch long, 64mm = 2.52 inch high). Raised "TOILET" lettering sits on a dark textured panel between scrolled, pointed ends, in an antique design that adds a nice touch to homes and offices.
Durable and sturdy, the plate has an authentic vintage look in a brown finish and suits doors at residences, offices, shops or restaurants. Four mounting holes are set 203mm hole to hole along the length and 30mm hole to hole across. Thickness is listed as 7mm; the label reads 6.8mm Thickness.
It comes as one piece with matching screws for wooden surfaces; metal surfaces need other suitable screws. On wood, mark and drill pilot holes to suit the screws, put a few drops of oil on the thread, then tighten with care, since over-torquing may break the screw. Made in India, with a 5 year warranty.
Catalogue code: SH-TOI-SGN-008-BR
Merry Christmas Decorative Door Sign Plate
₹2,265/piece
Merry Christmas decorative door sign plate in solid brass with an antique copper finish, measuring 16" overall. Raised "MERRY CHRISTMAS" lettering runs across a textured centre panel, framed by cast scrollwork, leaf motifs and pointed shell-style ends, giving a front door an ornate, festive accent for the Christmas season.
The plate is supplied as one piece with matching screws, made in India and backed by a 5 year warranty.
Catalogue code: SH-MER-SGN-007-BR
"Please Shut The Gate" Brass Door Sign
₹885/piece
The "Please Shut The Gate" Brass Door Sign is a solid brass plaque that reminds visitors to close a gate, measuring 191mm x 64mm (7.5 inch by 2.5 inch). The words PLEASE SHUT THE GATE stand out in raised letters against a dark textured background inside a raised border.
The finish is antique brass. Rounded end tabs each carry a screw hole for wall, door or gate fixing, marked 160mm hole to hole, and the plate is 5mm thick. It is supplied as one piece with matching screws, made in India, with a 5 year warranty.
Catalogue code: SH-STG-SGN-001-BR
Iron Door Grills2 products
"Alemeth" Black Antique Iron Door Grill
₹1,145/piece
"Alemeth" black antique iron door grill: a wrought iron speakeasy grill for doors and gates, 160mm x 163mm x 35mm. Alemeth is a Hebrew name taken from the Bible. Fixed on a door, it gives a grand antique look and ventilation for a bathroom, kitchen or bedroom, styled to match the door or architectural design. On an interior privacy door, these heavy duty units help assure personal safety.
Its four clover-shaped corner tabs carry screw holes 139mm and 138mm apart, around a hammered grid of crossed bars. Black Powder Coated for durability, it also comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-ALE-DGR-001-IR
12" Alemeth Black Antique Iron Door Grill
₹5,259/piece
The 12" Alemeth Black Antique Iron Door Grill is a heavy duty wrought iron speakeasy grill for doors and gates, 305mm x 305mm x 54mm overall. Alemeth is a Hebrew name taken from the Holy Bible.
Fixed on a door, it lets air into a bathroom, kitchen or bedroom, suits interior privacy doors and helps assure personal safety, its antique style matching the door or architectural design.
It comes as one piece with matching screws, made in India with a 2 year warranty. The black powder coat adds durability; Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes are also offered.
Catalogue code: SH-ALE-DGR-002-IR
Castors2 products
38mm Round Brass Castor
₹705/piece
This 38mm round brass castor is a stem castor with a round cup socket, made for small furniture wheels in solid brass with a polished lacquered finish. It serves as a replacement for cabinets, tables, plants, chairs and luggage.
High-hardness brass gives strong corrosion resistance and holds its shape, while the wheel rolls quietly and helps protect the floor.
Sold as one piece with matching screws, it is made in India, packed in U P, India, and comes with a 5 Year Warranty and "100% Risk-Free Shopping". It also comes in Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass, Satin Nickel and Zinc Plated.
Catalogue code: SH-RND-CST-002-BR
25mm Open Brass Castor
₹375/piece
This 25mm open brass stem castor is a furniture wheel in solid brass with a polished lacquered finish, made as a replacement for cabinets, tables, plants, chairs and luggage.
High-hardness brass gives strong corrosion resistance and holds its shape, while the wheel rolls quietly and helps protect the floor.
Sold as one piece with matching screws, it is made in India, packed in U P, India, and comes with a 5 Year Warranty and "100% Risk-Free Shopping". It also comes in Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass, Satin Nickel and Zinc Plated.
Catalogue code: SH-OPE-SCR-CST-02-BR
Cabinet Pulls18 products
5" "Bezek" Black Antique Iron Cabinet Pull
₹167/piece
The 5" "Bezek" Black Antique Iron Cabinet Pull is a cabinet handle with a twisted, rope-style grip between two spade-shaped end plates, each with one screw hole. It is cast iron, black powder coated, with a textured surface.
Overall dimensions are 133mm x 29mm x 35mm; the label reads 133mm = 5.2 inch, with 108mm = 4.2 inch between screw holes. The label names it the 4inch "Bezek" Black Antique Iron Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered.
Catalogue code: SH-5"-BEZ-CAB-006-IR; the label reads SH-4inch-BEZ-CAB-040-IR
4" Chuza Black Antique Iron Cabinet Pull
₹131/piece
The 4" Chuza Black Antique Iron Cabinet Pull is a bow-shaped cabinet handle with fleur-de-lis style end plates, each with one screw hole. It is cast iron, black powder coated, with a hammered-texture surface.
Overall dimensions are 93mm x 31mm x 24mm; the label reads 93mm = 3.6 inch, with 75mm = 2.9 inch between screw holes. The label names it the 4inch "Chebar" Black Antique Iron Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered.
Catalogue code: SH-4inch-CHU-CAB-009-IR; the label reads SH-4inch-CHE-CAB-044-IR
4 Inch "Tahpenes" Black Antique Iron Cabinet Pull
₹72/piece
The 4 Inch "Tahpenes" Black Antique Iron Cabinet Pull is a plain bow-shaped wrought iron handle for cabinet doors and drawers. Its smooth D-shaped grip ends in two flat, rounded tabs, each with one screw hole.
It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 104mm x 14mm x 26mm (length x width x height), with 83mm hole to hole. Country of origin is India, and it carries a 2 year warranty.
Catalogue code: SH-4" -TAH-CAB-015-IR
"Calno" Black Antique Iron Cabinet Pull
₹176/piece
The "Calno" Black Antique Iron Cabinet Pull is a bar handle for cabinet doors and drawers, with a grip banded by raised rings on two rounded mounting posts. It is made of cast iron in a black powder coated finish with a lightly textured surface.
Overall dimensions are 111mm x 17mm x 38mm; the label reads 111mm = 4.3 inch. The label names it the "Calno" Black Antique Iron Door And Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered.
Catalogue code: SH-CAL-DOP-008-IR; the label reads SH-CAL-DOP-043-IR
4" "Abinoam" Black Antique Iron Cabinet Pull
₹102/piece
The 4" "Abinoam" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with fleur-de-lis style ends, for pulling open cabinet doors and drawers. A curved, hammered-texture grip runs between two flared, pointed end plates, each with one screw hole, shown in a black powder-coated finish.
Overall dimensions are 103mm x 32mm x 19mm: 103mm = 4 inch long, 32mm wide and 19mm in height, with 81mm = 3.1 inch between the two screw holes. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-4"-ABI-CAB-004-IR; the product label reads SH-4inch-ABI-CAB-034-IR
8 inch "Ebenezer" Black Antique Iron Cabinet Pull
₹213/piece
8 inch "Ebenezer" Black Antique Iron Cabinet Pull is a curved cast iron bow handle with a fluted face, for cabinet doors and drawers. Parallel ribs run the length of the gently curved grip, which flares out at each end. The back carries two round fixing points for the matching screws supplied.
It has a black powder coated finish and is supplied as one piece. Country of origin is India, and it carries a 2 year warranty.
Catalogue code: SH-EBE-CAB-015-IR
6 inch "Uzai" Black Antique Iron Cabinet Pull
₹205/piece
6 inch "Uzai" Black Antique Iron Cabinet Pull is a cast iron handle with a dimpled, hammered-look grip, made for cabinet doors and drawers. The grip steps out on offset legs to two round end plates, each with one screw hole.
It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 153mm x 23mm x 39mm, with 128mm = 5 inch between the fixing holes. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty.
Catalogue code: SH-UZA-CAB-014-IR
"Jaakobah" Black Antique Iron Cabinet Pull
₹185/piece
The "Jaakobah" Black Antique Iron Cabinet Pull is a 6 inch wrought iron handle for cabinet doors and drawers. Its turned grip swells gently through the middle and sits on two round posts with ringed collars at each end.
It is made of wrought iron with a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 153mm x 23mm x 86mm, with 132mm hole to hole and 19mm thickness at the grip. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty.
Catalogue code: SH-JAA-CAB-013-IR
"Aeneas" Brass Cabinet Pull
₹485/piece
The "Aeneas" brass cabinet pull is an ornate solid brass handle for cabinet doors and drawers, displayed in a satin nickel finish. Its bow-shaped grip has a fine beaded edge and ends in pierced scrollwork backplates with screw holes at each end, giving furniture a decorative, classic look.
It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Available finishes: Satin Nickel, Antique Brass, Antique Copper, Matt Black, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass
Catalogue code: SH-AEN-CBNP-001-BR
"Calah" Black Antique Iron Cabinet Pull
₹228/piece
The "Calah" Black Antique Iron Cabinet Pull is a wrought iron handle for cabinet doors and drawers, shaped as an offset grip with a faceted centre ridge set between two square, bevelled foot plates. Each plate has a screw hole at its outer edge, and the textured surface carries a black powder coated finish.
It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India.
Catalogue code: SH-CAL-CAB-012-IR
"Iturea" Black Antique Iron Door And Cabinet Pull
₹126/piece
The "Iturea" Black Antique Iron Door And Cabinet Pull is a cast iron D-shaped handle for doors and cabinets. Each end sits on a squared foot plate with a screw hole, and the grip has a lightly textured black powder coated surface. The pull also comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Overall dimensions are listed as 121mm x 21mm x 28mm; the product label marks 120mm = 4.7 in long, 22mm = 0.8 in wide and 31mm Height, with 103mm = 4 in Hole to Hole. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India.
Catalogue code: SH-ITU-DOP-010-IR
"Achab" Black Antique Iron Cabinet Pull
₹199/piece
The "Achab" Black Antique Iron Cabinet Pull is a cast iron door and cabinet pull for pulling open cabinet doors, drawers and room doors. Its grip is a ribbed, spiral-twisted bar set between two curved legs that end in round mounting feet, shown in a black powder-coated finish.
Overall dimensions are 109mm x 18mm x 36mm: 109mm = 4.2 inch long, 18mm wide and 36mm in height. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Besides Black Powder Coated, it comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-ACH-DOP-003-IR
4" "Bethany" Black Antique Iron Cabinet Pull
₹105/piece
The 4" "Bethany" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a smooth, rounded bow grip and fleur-de-lis end plates, for pulling open cabinet doors and drawers. Each pointed end plate has one screw hole, and the pull is shown in a black powder-coated finish.
Overall dimensions are 105mm x 27mm x 25mm, with 27mm width and 25mm height. Its length is given as 105mm = 8.3 inch, and the screw holes sit 79mm = 3.1 inch apart. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-4"-BET-CAB-005-IR (label: SH-4inch-BET-CAB-005-IR)
"Jahaziel" Black Antique Iron Cabinet Pull
₹79/piece
The "Jahaziel" Black Antique Iron Cabinet Pull is a cast iron handle for cabinet doors and drawers, with a slim, gently curved flat grip running between spear-tipped fleur-de-lis ends, each with a screw hole. It comes in a black powder coated finish.
Overall dimensions are 172mm x 32mm x 71mm: the label marks 172mm = 6.7 inch long, 32mm across the ends and 71mm Height, with 121mm = 4.7 inch between the screw holes. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India.
Catalogue code: SH-JAH-DOP-011-IR
"James" Black Antique Iron Cabinet Pull
₹145/piece
"James" Black Antique Iron Cabinet Pull is an ornamental 4.8 inch wrought iron handle for cabinet doors and drawers. The arched grip is decorated with scrolling leaf and floral work, with a raised oval at the centre and one screw hole in each ornate end.
It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 124mm x 28mm x 23mm, with 59mm hole to hole. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty.
Catalogue code: SH-JAM-CAB-014-IR
4" "Tahpenes" Brass Cabinet Pull
₹285/piece
The 4" "Tahpenes" brass cabinet pull is a plain D-shaped solid brass handle for cabinet doors and drawers, displayed in an antique copper finish. Sold as a 4" pull, its overall dimension is listed as 3.89".
The smooth curved grip rises from two flat, round-ended feet, each with a single screw hole, and the copper finish shows darker shaded tones for an aged look.
It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
Available finishes: Antique Copper, Antique Brass, Matt Black, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass, Satin Nickel
Catalogue code: SH-4"-TAH-CBNP-002-BR
4" Talmai Black Antique Iron Hand Forged Cabinet Pull
₹195/piece
The 4" "Talmai" Black Antique Iron Hand Forged Cabinet Pull is a bow-shaped handle for cabinet doors and drawers. Made of cast iron in a black powder coated finish, it has a hammered-texture surface and a round screw-hole plate at each end.
Overall dimensions are 106mm x 32mm x 37mm; the printed label reads 106mm = 4.1 inch long, 31mm wide, 36mm height and 83mm = 3.2 inch between screw holes. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered.
Catalogue code: SH-4"-TAL-DOP-001-IR; the label reads SH-4inch-TAL-DOP- 001-IR
5" "Ben" Black Antique Iron Cabinet Pull
₹122/piece
The 5" "Ben" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a wide, hammered-texture bow grip and fleur-de-lis end plates, for pulling open cabinet doors and drawers. Each pointed end plate has one screw hole, and the pull is shown in a black powder-coated finish.
Overall dimensions are 126mm x 29mm x 27mm: 126mm = 4.9 inch long, 29mm wide and 27mm in height, with 96mm = 3.7 inch between the screw holes. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-4"-BEN-CAB-007-IR; the product label reads SH-5inch-BEN-CAB-041-IR
Drawer Pull26 products
"Ithai" Brass Drawer Pull
₹455/piece
The "Ithai" Brass Drawer Pull pairs solid brass with an Antique Brushed Nickel finish, giving a silver-grey cup pull for drawers and cabinets. An oval front panel carries a raised scrolling vine pattern over a darker textured ground, and each curved end has a screw hole, the two set 87mm = 3.4 inch apart.
Overall dimensions are 102mm x 42mm x 23mm, with 102mm = 4 inch long, 42mm = 1.6 inch wide and 23mm height. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty.
Catalogue code: SH-ITH-DRWP-008-BR
"Eluzai" Black Antique Iron Drawer Pull
₹169/piece
A half-moon cup pull with a ribbed shell-style bowl, the "Eluzai" black antique iron drawer pull is cast iron in a black powder coated finish. It measures 94mm (3.7 inch) x 47mm (1.8 inch) x 21mm overall. The textured rim fixes through three screw holes, two at the lower ends set 83mm (3.2 inch) apart and one at the top, 33mm (1.2 inch) above them.
It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India.
Catalogue code: SH-ELU-DRWP-007-IR
"Sarah" Black Antique Iron Drawer Pull
₹178/piece
The "Sarah" Black Antique Iron Drawer Pull is a cast iron cup pull for cabinet drawers, with a hooded bowl decorated in raised leaf scrolls and a small round bead at the centre of its lower edge. Rounded ears at each end carry a screw hole, and the bowl gives the fingers a grip to open the drawer.
It is listed at 47mm x 123mm x 26mm overall; the size marks read 123mm = 3.7 inch long, 40mm tall and 30mm Height, with the screw holes 107mm = 4.2 inch apart. The finish is black powder coated. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty.
Catalogue code: SH-SAR-DRWP-002-IR
"Elam" Black Antique Iron Cabinet Pull And Drawer Handle
₹167/piece
The "Elam" Black Antique Iron Cabinet Pull And Drawer Handle is an iron pull for cabinets and drawers, built as a flat plate with a D-shaped round-bar handle held in a raised channel across its middle. Four screw holes, two above the channel and two below, fix it to the door or drawer front, and the bar gives the hand a grip to pull it open.
The finish is black powder coated. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty.
Catalogue code: SH-ELA-DRWP-005-IR
"Festus" Brass Drawer Pull
₹455/piece
The "Festus" Brass Drawer Pull is an ornate solid brass pull in an Antique Copper finish for drawers and cabinets. Its raised front carries an embossed scroll and leaf pattern under a peaked crest, copper-toned with darker recesses, and each end has a square screw mount.
Overall dimensions are 118mm x 45mm x 77mm, with 118mm = 4.6 inch long and 45mm = 1.7 inch wide. The 77mm figure is marked both as the height and as the 77mm = 3 inch spacing between the two screw holes. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty.
Catalogue code: SH-FES-DRWP-007-BR
"Ezer" Black Antique Iron Cabinet Pull And Drawer Handle
₹876/piece
The "Ezer" black antique iron cabinet pull and drawer handle is a wrought iron bail pull for cabinet doors and drawers, finished in black powder coat. A curved bail handle hangs from two hinged knuckles on a long, flat back plate with rounded ends, which fixes through a screw hole at each end and one at the centre.
The plate is 206mm = 8.1 inch long and 54.2mm across, with 180mm = 7.1 inch between the end screw holes, 116mm = 4.7 inch across the handle and an 18.2mm height. It comes as one piece with matching screws, is made in India and carries a 2 year warranty.
Catalogue code: SH-EZE-DRWP-021-IR
"Abez" Brass Drawer Pull
₹305/piece
The "Abez" Brass Drawer Pull is a solid brass cup-style pull for drawers and cabinet fronts. Its half-moon cup carries a fluted shell pattern in a bright brass tone, framed by a brushed rim, and it mounts through three screw holes: one at the top and one at each end.
The finish is Polished Lacquered, offered as Polish Lacquered. Overall dimensions are 102mm x 52mm x 22mm, that is 102mm = 4 Inch long, 52mm width and 22mm height. It is supplied as one piece with matching screws, made in India and covered by a 5 year warranty.
Catalogue code: SH-ABE-DRWP-001-BR
"Dibri" Black Antique Iron Drawer Pull
₹97/piece
The "Dibri" Black Antique Iron Drawer Pull is a cast iron cup pull for cabinet drawers, with a fluted, ribbed hood rising to a small bead at the top and a smooth arched lower edge. Rounded ears at each end carry a screw hole, and the hood gives the fingers a grip to open the drawer.
It measures 115mm x 40mm x 29mm overall (115mm = 4.5 inch long), with the screw holes 113mm = 4.4 inch apart, and has a black powder-coated finish. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty.
Catalogue code: SH-DIB-DRWP-004-IR
"Abez" Black Antique Iron Drawer Pull
₹178/piece
The "Abez" Black Antique Iron Drawer Pull is a half-moon cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. The cup is fluted like a shell, its ribs ending in a scalloped lower edge, inside a flat textured flange.
It measures 102mm x 52mm x 22mm overall and fixes with three screws through holes in raised lugs, one at the top and one at each lower corner. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-ABE-DRWP-020-IR
"Gog" Black Antique Iron Drawer Pull
₹178/piece
The "Gog" Black Antique Iron Drawer Pull is a half-moon cast iron cup pull for drawers, cabinets and cupboards, finished in black powder coat. A scrolled border and a ribbed inner rim frame the deep cup, which carries a raised floral relief, and a screw hole sits in each rounded end.
It measures 93mm x 46mm x 25mm overall: 93mm (3.6 inch) long, 46mm (1.8 inch) tall and 25mm in height. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-GOG-DRWP-013-IR
"Iconium" Brass Drawer Pull
₹356/piece
The "Iconium" Brass Drawer Pull is a solid brass cup pull in an Antique Copper finish for drawers and cabinets. The rectangular cup has a beaded border around a dense embossed leaf pattern, copper-toned with darker recesses, and a screw hole at each end, the two set 82mm = 3.2 inch apart.
Overall dimensions are 91mm x 29mm x 21mm, with 91mm = 3.5 inch long. It is supplied as one piece with matching screws, made in India, packed in U P, India, and covered by a 2 year warranty.
Catalogue code: SH-ICO-DRWP-010-IR (label reads SH-ICO-DRWP-010-BR)
"Harim" Black Antique Iron Drawer Pull
₹376/piece
The "Harim" Black Antique Iron Drawer Pull is a cup-style pull for drawers and cabinets. It is listed as made of solid brass in an Antique Copper finish, and its product label reads "Harim" Brass Drawer Pull. The finish is copper-toned with darker recesses.
A rectangular front panel carries an embossed arch-and-scroll pattern, and each rounded end has a screw hole, the two set 88mm = 3.4 inch apart. Overall dimensions are listed as 106mm x25mm x 18mm, with 106mm = 4.1 inch long. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty.
Catalogue code: SH-HAR-DRWP-009-IR (label reads SH-HAR-DRWP-009-BR)
"Jemuel" Black Antique Iron Drawer Pull
₹175/piece
The "Jemuel" Black Antique Iron Drawer Pull is a half-round cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. Its whole surface has a dimpled, hammered texture, with a rolled lip along the lower edge of the cup.
It measures 99mm x 37mm x 19mm overall (3.8 inch wide, 1.4 inch tall). Two screw holes at the lower ends sit 82mm = 3.2 inch apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-JEM-DRWP-019-IR
"Galal" Black Antique Iron Drawer Pull
₹117/piece
The "Galal" Black Antique Iron Drawer Pull is a plain cast iron cup pull for drawers, cabinets and cupboards in black powder-coated finish. Its half-oval cup has a hammered texture framed by a smooth raised rim, with a screw hole in each end tab.
Overall dimensions are listed as 28mm x 87mm x 17mm: 87mm (3.4 inch) long, 28mm tall and 17mm in height, with 73mm (2.8 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-GAL-DRWP-012-IR
"Festus" Black Antique Iron Drawer Pull
₹179/piece
The "Festus" black antique iron drawer pull is a decorative bin-style pull in cast iron with a black powder coated finish, shaped with pointed end tabs and a raised, peaked centre covered in embossed scroll work. It measures 118mm (4.6 inch) x 45mm (1.7 inch) x 77mm overall, with the 77mm given as height. Two screw holes sit in square bosses on the end tabs, set 77mm (3 inch) apart.
It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India.
Catalogue code: SH-FES-DRWP-010-IR
"Ithai" Black Antique Iron Drawer Pull
₹227/piece
The "Ithai" Black Antique Iron Drawer Pull is an oval cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. The oval face is cast with a raised scrolling floral relief on a fine textured ground, set between two rounded end tabs.
It measures 102mm x 42mm x 23mm overall (4 inch wide, 1.6 inch tall). A screw hole in each end tab gives 87mm = 3.4 inch spacing. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India.
Catalogue code: SH-ITH-DRWP-018-IR
"Eglaim" Black Antique Iron Drawer Pull
₹157/piece
With a deep fluted shell bowl, the "Eglaim" black antique iron drawer pull is a half-moon cup pull in cast iron with a black powder coated finish. It measures 95mm (3.7 inch) x 45mm (1.7 inch) x 25mm overall. Three screw holes fix it in place, two at the lower ends set 84mm (3.3 inch) apart and one at the top, 28mm (1.1 inch) above them.
It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India.
Catalogue code: SH-EGL-DRWP-009-IR
"Gezer" Black Antique Iron Drawer Pull
₹115/piece
The "Gezer" Black Antique Iron Drawer Pull is a cast iron cup pull for opening drawers, cabinets and cupboards, finished in black powder coat. Its hooded cup carries a raised scrolling leaf pattern and comes to a soft point along the lower edge. Each rounded end tab has one screw hole.
It measures 105mm x 40mm x 21mm overall: 105mm (4.1 inch) long, 40mm (1.5 inch) tall and 21mm in height, with 91mm (3.5 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-GEZ-DRWP-011-IR
"Emmor" Black Antique Iron Drawer Pull
₹156/piece
The "Emmor" black antique iron drawer pull is a rectangular bin-style pull in cast iron with a black powder coated finish, its backplate and raised front covered in an embossed foliage pattern. It measures 88mm (3.4 inch) x 35mm (1.3 inch) x 18mm overall. Two screw holes, one at each end, are set 76mm (2.9 inch) apart.
It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India.
Catalogue code: SH-EMM-DRWP-008-IR
"Harim" Black Antique Iron Drawer Pull
₹145/piece
The "Harim" Black Antique Iron Drawer Pull is a rectangular cast iron bin pull for drawers, cabinets and cupboards in black powder-coated finish. Its flat front plate carries a scrolled centre motif above a band of rounded lobes, between flared end tabs that each hold one screw hole.
It measures 106mm x 25mm x 18mm overall: 106mm (4.1 inch) long, 25mm tall and 18mm in height, with 88mm (3.4 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty.
Catalogue code: SH-HAR-DRWP-014-IR
Showing 20 of 26 in Drawer Pull
Show 6 moreDrop Pulls13 products
"Havilah" Black Antique Iron Ring/Drop Pull
₹226/piece
The "Havilah" Black Antique Iron Ring/Drop Pull is an iron ring pull for cabinets and drawers, with a twisted, rope-style round ring. The ring hangs from a square block on a scalloped, flower-shaped backplate with four screw holes, finished in glossy Black Powder Coated.
Supplied as one piece with matching screws, it is also offered in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are 98mm x 71mm x 38mm, with the 98mm length marked as 3.85 inch. The ring is 8mm thick and the screw holes sit 53mm hole to hole each way. Country of origin is India, with a 2 year warranty.
Catalogue code: SH-HAV-DRPP-003-IR
"Elohim" Black Antique Iron Ring/Drop Pull
₹635/piece
The "Elohim" Black Antique Iron Ring/Drop Pull is a cast iron drop pull for front doors, cabinets, drawers and kitchen drawers. Elohim is a common name of God in the Hebrew Bible. A hammered-texture round backplate with four screw holes carries a pear-shaped drop with a scalloped lower edge, giving furniture, home doors and window fittings a distinctive look.
It comes as one piece with matching screws in Black Powder Coated, and also in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are 123mm x 88mm x 46mm; the drop is marked 89mm wide. The screw holes sit 51mm hole to hole each way, and the drop is 15.7mm thick. Made in India, with a 2 year warranty.
Catalogue code: SH-ELO-DRPP-005-IR
"Cana" Decorative Brass Drop Pull
₹325/piece
The "Cana" decorative brass drop pull is a solid brass pendant pull for drawers and cabinet doors, finished in Polished Lacquered brass with a bright gold shine. A tapered, gently curved drop swings from a hinge knuckle set on a round rosette ringed with bands of fine textured pattern.
It is listed as 56mm x 34mm x 16mm overall, with a 33.9mm rosette, a 44.2mm drop and a 16.4mm height. Each pull comes as one piece with matching screws, is made in India and carries a 5 year warranty. Other finishes are Antique Copper, Antique Brass, Antique Brushed Nickel, Satin Nickel and Satin Brass.
Catalogue code: SH-CAN-DRPP-005-BR
"Ring" Brass Drop Pull
₹432/piece
The "Ring" brass drop pull is a solid brass ring pull for drawers and cabinet doors, shown in a satin nickel finish. A round ring hangs from a square mounting block with a pyramid-shaped top, and the brushed metal surface has a soft grey sheen.
Overall size is 62mm x 59mm x 15mm, with an 18mm square block and a 57mm ring. It is supplied as one piece with matching screws, made in India and backed by a 5 Year Warranty. Besides Satin Nickel, it comes in Antique Brass, Antique Brushed Nickel, Antique Copper, Polish Lacquered and Satin Brass.
Catalogue code: SH-RIN-DRPP-002-BR
"Hadoram" Black Antique Iron Drop Pull
₹116/piece
The "Hadoram" black antique iron drop pull is a hand-forged iron ring pull for drawers and cabinet doors, finished in black powder coat. A round ring hangs from a knob on a back plate with pointed, spade-shaped ends, each carrying a screw hole, and the hammered, textured surface gives it a rustic forged look.
Overall size is 81mm x 37mm x 23mm, with 56mm hole to hole, a 38mm length and a 5mm thickness. It comes as one piece with matching screws, is made in India and carries a 2 year warranty. It is also offered in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-HAD-DRPP-001-IR
3.4" Ring Iron Drop Pull
₹407/piece
3.4" ring iron drop pull for cabinet doors and drawers: a plain, smooth round ring hanging from a 21mm square mounting block with a pyramid-faceted top. It is made of wrought iron in a black powder coated finish with a matte look.
Overall dimensions are 87mm x 81mm x 15mm (3.4 x 3.1 inch, 15mm height). Matching screws are included. Sold as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-RIN-DRPP-009-IR
"Gamaliel" Black Antique Iron Drop Pull
₹615/piece
"Gamaliel" black antique iron drop pull for cabinet doors and drawers, pairing a twisted ring with a pointed, cross-shaped backplate that has a screw hole at each of its four points. It is made of wrought iron in a black powder coated finish over a hammered texture.
The screw holes sit on a 37mm x 37mm spacing, and matching screws are included. Overall dimensions are 95mm x 61mm x 34mm (3.7 x 2.4 inch, 34mm height); the ring spans 72mm (2.8 inch) and is 10.6mm thick. Sold as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-GAM-DRPP-011-IR
"Elymas" Antique Cast Iron Ring/Drop Pull
₹716/piece
"Elymas" antique cast iron ring drop pull for cabinet doors and drawers, with a twisted ring hanging from a square knuckle on a notched, castellated backplate. It is named as cast iron and listed as made of wrought iron, finished in black powder coat.
The hammered-texture plate fixes through four screw holes on a 37mm x 37mm spacing, and matching screws are included. Overall dimensions are 95mm x 61mm x 34mm (3.7 x 2.4 inch, 34mm height); the ring spans 72mm (2.8 inch) and is 10.6mm thick. Sold as one piece, made in India, with a 2 year warranty.
Catalogue code: SH-ELY-DRPP-008-IR
"Ring" Iron Drop Pull
₹305/piece
The "Ring" Iron Drop Pull is a wrought iron drop pull for cabinets and drawers, with a plain round ring hung from a square block with a pyramid-shaped top. It has a matte Black Powder Coated finish and is supplied as one piece with matching screws.
Overall dimensions are 62mm x 59mm x 15mm, marked as 62mm = 2.4 inch long, 59mm = 2.3 inch wide and 15mm in height. The square block is 18mm across and the ring is 7.7mm thick. Country of origin is India, with a 2 year warranty.
Catalogue code: SH-RIN-DRPP-006-IR
"Cat Ring" Black Antique Iron Drop Pull
₹195/piece
"Cat Ring" black antique iron drop pull for cabinet doors and drawers, shaped as a detailed cat's head with ears, eyes and whiskers, and a ring hanging beneath it that carries a small face at its base. It is made of wrought iron in a black powder coated finish.
Overall dimensions are 116mm x 52mm x 27mm (116mm = 4.5 inch long, 52mm width, 27mm height). The cat head section measures 67mm (2.6 inch) and the ring section 64mm (2.5 inch). Matching screws are included. Sold as one piece, made in India, with a 2 Year Warranty.
Catalogue code: SH-CAR-DRPP-010-IR
"Chelub" Decorative Brass Drop Pull
₹531/piece
The "Chelub" decorative brass drop pull is a solid brass ring pull for drawers and cabinet doors, shown in Antique Brass, with dark recesses setting off the raised brass detail. A ring hinged at the top on a ribbed knuckle lies over a back plate with ribbed, fan-like side edges, framing a centre rosette of radiating petals circled by a row of beads.
Overall size is 116mm x 52mm x 27mm. It is supplied as one piece with matching screws, made in India and carries a 5 Year Warranty. Further finishes are Antique Brushed Nickel, Satin Brass, Satin Nickel, Polish Lacquered and Antique Copper.
Catalogue code: SH-CHE-DRPP-003-BR
"Ibzan" Oval Ring Iron Drop Pull
₹226/piece
The "Ibzan" Oval Ring Iron Drop Pull is a wrought iron drop pull for cabinets and drawers, built around an oval, twisted rope-style ring. The ring hangs from a square block on a scalloped, flower-shaped backplate with four screw holes, finished in glossy Black Powder Coated.
It is supplied as one piece with matching screws and also comes in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are 95mm x 71mm x 38mm. Country of origin is India, and it carries a 2 Year Warranty.
Catalogue code: SH-IBZ-DRPP-004-IR
"Etham" Black Antique Iron Ring/Drop Pull
₹224/piece
The "Etham" Black Antique Iron Ring/Drop Pull is an iron drop pull for cabinets and drawers, with a smooth round ring on a scalloped, flower-shaped backplate. The ring hangs from a square block, and the plate fixes through four screw holes.
It is supplied as one piece with matching screws in Black Powder Coated. Overall dimensions are 70mm x 69mm x 36mm; the ring is 8mm thick and the screw holes sit 55mm apart each way. Country of origin is India, with a 2 year warranty.
Catalogue code: SH-ETH-DRPP-007-IR; the product label reads SH-ETH-DRPP-006-IR
Cabinet Knobs19 products
"Baalim" Antique Iron Cabinet Knob
₹188/piece
The "Baalim" Antique Iron Cabinet Knob is a cast iron knob with a hammered, dimpled top inside a raised rim, for cabinet doors, drawers and cupboards. The finish displayed is Black Powder Coated, and the knob also appears in a grey iron tone with a textured cast surface, on a short stem and round foot.
Overall dimensions are 40mm x 30mm x 30mm; it measures 40mm = 1.5 inch across and 30mm = 1.1 inch high, with a 16mm = 0.6 inch foot. It is supplied as one piece with matching screws, carries a 2 year warranty, and its country of origin is India. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BAA-SCK-004-IR
"Bathsheba" Black Antique Iron Cabinet Knob
₹165/piece
The "Bathsheba" Black Antique Iron Cabinet Knob is a cast iron mushroom knob with a hammered, dimpled head in a black powder coated finish, for cabinet doors and drawers. Its wide, gently domed head carries an even hammered dimple pattern across the face and sits on a straight round stem.
Overall dimensions are 41mm x 31mm x 31mm; it measures 41mm = 1.61in across and 31mm = 1.2in high, with a 20mm stem. It is supplied as one piece with matching screws, carries a 2 year warranty, and its country of origin is India.
Catalogue code: SH-BAT-BCK-003-IR
"Dabareh" Black Antique Iron Cabinet Knob
₹135/piece
The "Dabareh" Black Antique Iron Cabinet Knob is a cast iron knob for cabinet doors and drawers, with a recessed flat face framed by a raised beaded rim. The round head rests on a waisted stem that flares out again at the mounting end.
It is finished in black powder coat and supplied as one piece with matching screws. Overall dimensions are listed as 33mm x 36mm x 19mm; the marked measurements give 36mm = 1.4 inch across the head, 33mm = 1.2 inch in height and 18.5mm across the base. Country of origin is India; it is packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-DAB-BCK-008-IR
"Addin" Brass Cabinet Knob
₹185/piece
The "Addin" Brass Cabinet Knob is a square solid brass knob for cabinet doors and drawers, in an Antique Brass finish. Its flat, brushed square top sits on a round stem.
Overall dimensions are 26mm x 38mm x 10.6mm; the label reads 26mm = 1.02 inch high, 38mm = 1.4 inch across the top and a 10.6mm stem. It comes as one piece with matching screws, made in India, packed in U P, India, with a 5 year warranty. Other finishes: Antique Brushed Nickel, Antique Copper, Black Nickel, Black Powder Coated, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass, Satin Nickel.
Catalogue code: SH-ADI-BCK-002-BR
"Anamim" Brass Cabinet Knob
₹215/piece
The "Anamim" Brass Cabinet Knob is a solid brass knob for cabinet doors and drawers, finished in Antique Copper. Its domed head is shaped as a layered sunflower of pointed, textured petals around a raised floral centre, set on a slim round stem.
Overall dimensions are 29mm x 48mm x 11mm, with the head 48mm = 1.8 inch across. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
It is also offered in Antique Brass, Antique Brushed Nickel, Black Nickel, Black Powder Coated, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass and Satin Nickel.
Catalogue code: SH-ADI-BCK-003-BR (the product label reads SH-ADI-BCK-002-BR)
"Athaiah" Brass Kabinet Knob
₹167/piece
The "Athaiah" Brass Kabinet Knob is a compact solid brass cabinet knob finished in Antique Brass, with a flat round head on a tapered stem. The plain head suits cabinet doors and drawers.
Overall dimensions are 21mm x 26mm x 10mm, with the head 26mm = 1.02 inch across. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty.
It is also offered in Antique Brushed Nickel, Antique Copper, Black Nickel, Black Powder Coated, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass and Satin Nickel.
Catalogue code: SH-ADI-BCK-004-BR (the product label reads SH-ADI-BCK-003-BR)
"Abida" Black Antique Iron Cabinet Knob
₹118/piece
The "Abida" Black Antique Iron Cabinet Knob is a cast iron oval knob in a black powder coated finish, for cabinet doors, drawers and cupboards. An egg-shaped grip sits on a short stem above a round backplate with a hammered, textured rim.
Overall dimensions are 31mm x 33mm; it measures 31mm = 1.1 inch high and 33mm = 1.5 inch across. It is supplied as one piece with matching screws, carries a 2 year warranty, and its country of origin is India. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-ABI-BCK-001-IR
"Diblaim" Black Antique Iron Cabinet Knob
₹109/piece
The "Diblaim" Black Antique Iron Cabinet Knob is a chunky cast iron star knob for cabinet doors and drawers, with five short, broad points and a bubbled, dimpled surface. The Black Powder Coated finish covers the whole star and its short round stem.
It is supplied as one piece with matching screws, made in India and backed by a 2 year warranty.
Catalogue code: SH-DIB-BCK-011-IR
"Bekah" Black Antique Iron Cabinet Knob
₹105/piece
The "Bekah" Black Antique Iron Cabinet Knob is a cast iron pull knob for cabinet doors and drawers, with a domed head covered in raised scrollwork. A band of raised pattern rings the edge of the head, which sits on a tapered round stem.
It is finished in black powder coat and supplied as one piece with matching screws. Overall dimensions are listed as 33mm x 27mm x 27mm; the marked measurements give 33mm = 1.2in across, 27mm = 1.06in high and a 15mm stem, with a second 33mm = 1.2in mark along the head. Country of origin is India; it is packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BEK-BCK-005-IR
"Dalaiah" Black Antique Iron Cabinet Knob
₹109/piece
The "Dalaiah" Black Antique Iron Cabinet Knob is a shield-shaped cast iron knob for cabinet doors and drawers. Its pebbled face carries a raised border and a raised ornamental motif in the centre, set on a short round stem.
It is finished in black powder coat and supplied as one piece with matching screws. Country of origin is India, and it carries a 2 year warranty.
Catalogue code: SH-DAL-BCK-008-IR
"Careah" Antique Iron Cabinet Knob
₹45/piece
The "Careah" Antique Iron Cabinet Knob is a plain round cast iron knob for cabinet doors and drawers, with a smooth flat face and a slightly bevelled edge. Its disc-shaped head sits on a straight cylindrical stem.
It is finished in black powder coat and supplied as one piece with matching screws. Country of origin is India; it is packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-CAR-BCK-007-IR
"Star" Black Antique Iron Cabinet Knob
₹85/piece
The "Star" Black Antique Iron Cabinet Knob is a slim, five-armed starfish knob in cast iron for cabinet doors and drawers, measuring 74mm x 70mm overall. Its long, tapering arms are ribbed along the edges, with a trail of small ring dots running out from the centre, all in a Black Powder Coated finish over a short round stem.
It is supplied as one piece with matching screws, made in India and backed by a 2 year warranty.
Catalogue code: SH-STA-BCK-010-IR
"Adoni" Brass Cabinet Knob
₹165/piece
"Adoni" solid brass cabinet knob for cabinet doors and drawers, with a square, pyramid-shaped top set on a short round stem. The finish is listed as polished lacquered and offered as "Polish Lacquered", giving a warm golden brass tone with a fine brushed sheen.
Matching screws are included. Sold as one piece, made in India, with a 5 year warranty.
Catalogue code: SH-ADO-BCK-001-BR
"Debir" Black Antique Iron Cabinet Knob
₹75/piece
The "Debir" Black Antique Iron Cabinet Knob is a starfish-shaped cast iron knob for cabinet doors and drawers, in a Black Powder Coated finish. Its five plump arms carry a raised, beaded texture with a ridge down the middle of each, and the knob sits on a short round stem.
Overall dimensions are 36mm x 34mm, and the product code is 36mm x 34mm x 30mm. It is supplied as one piece with matching screws, made in India and backed by a 2 year warranty.
"Barnabas" Brass Cabinet Knob
₹250/piece
"Barnabas" Brass Cabinet Knob is a round 32mm solid brass knob for cabinet doors and drawers, catalogue code SH-BAR-BCK-005-BR, shown in an Antique Copper finish. It brings a textured, woven-look grip to cupboards and drawers.
Its round face carries a raised lattice of crossing bars with lighter brushed highlights against a dark recessed ground, set on a short flared stem. The diameter is 32mm (32mm = 1.2 Inch), with a marked height of 26mm = 1 inch. It is supplied as one piece with matching screws and carries a 5 year warranty.
Available finishes: Antique Brass, Antique Copper, Matt Black, Polished Lacquered, Satin Brass, Satin Nickel
Catalogue code: SH-BAR-BCK-005-BR
"Cabbon" Black Antique Iron Cabinet Knob
₹89/piece
The "Cabbon" Black Antique Iron Cabinet Knob is a cast iron knob for cabinet doors and drawers, its round head cast with a raised many-petalled flower. The flower fills the face around a raised centre, and the head sits on a short, straight round stem.
It comes in black powder coat, supplied as one piece with matching screws. Overall dimensions are listed as 30mm x 28mm x 28mm; the marked measurements give 30mm = 1.18in across, 27.7mm = 1.09in high and an 11mm stem, with a second 30mm = 1.18in mark along the head. Country of origin is India; it is packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-CAB-BCK-006-IR
"Bozez" Brass Cabinet Knob
₹390/piece
"Bozez" Brass Cabinet Knob is an oval solid brass knob for cabinet doors and drawers, catalogue code SH-BOZ-BCK-006-BR, shown in an Antique Copper finish. Its long, ornate head gives a broad decorative grip for cupboards and drawers.
The oval head is worked in mirrored scrolls and leaf curls around a smooth round centre boss, with dark recesses behind copper-toned highlights, on a round stem. Overall dimensions are listed as 61mm x 28mm x 32mm; the product label marks 61mm = 2.4 inch, 28mm = 1.1 inch and 30mm = 1.1 inch. It is supplied as one piece with matching screws and carries a 5 year warranty.
Available finishes: Antique Copper, Antique Brass, Matt Chrome, Satin Brass, Satin Nickel, Polished Lacquered
Catalogue code: SH-BOZ-BCK-006-BR
"Adbeel" Black Antique Iron Cabinet Knob
₹152/piece
The "Adbeel" Black Antique Iron Cabinet Knob is a round cast iron knob with a ringed, domed top in a black powder coated finish, for cabinet doors and drawers. Its wide rounded head steps up through fine grooved rings to a centre dome and stands on a flared round foot.
Overall dimensions are 31mm x 38mm: 31mm = 1.2 inch high and 38mm = 1.4 inch across, with a 23mm = 0.9 inch foot. It is supplied as one piece with matching screws, carries a 2 year warranty, and its country of origin is India. It comes in Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-ADB-BCK-002-IR
"Cedron" brass cabinet knob
₹325/piece
The "Cedron" brass cabinet knob is a 40mm diameter knob made of solid brass in a satin nickel finish, for cabinet doors, drawers and cupboards. It has a rounded mushroom-style head on a slim tapered stem, with a brushed silver-tone surface.
It measures 40mm = 1.5 inch across and 30mm = 1.1 inch high, with a 19mm stem. Each knob is supplied as one piece with matching screws and carries a 5 year warranty.
Catalogue code: SH-CED-BCK-007-BR
Corners7 products
"Bochim" Black Antique Cast Iron L-Corner
₹197/piece
The "Bochim" Black Antique Cast Iron L-Corner is a wrap-around cabinet corner guard with a scalloped, fan-shell top. The ribbed fan face has a smooth black powder-coated finish, the inside is hammered, and the folded sides carry screw holes for the matching screws supplied.
The overall size is listed as 73mm x 73mm x 31mm; each side is also marked 73.4mm = 2.8 inch, with a 31.5mm height, a 4mm thickness and 34mm = 1.3 Inch between screw holes. It is supplied as one piece, made in India and packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BOC-COR-005-IR
"Cabbon" Black Antique Cast Iron L-Corner
₹167/piece
The "Cabbon" Black Antique Cast Iron L-Corner is a flat L-shaped corner plate for cabinets, measuring 104mm x 104mm x 5mm (104mm = 4.09 inch per arm). Each arm ends in a pointed spear tip, and the surface carries a dotted hammered texture, a raised border line and small raised studs under a black powder-coated finish.
Three screw holes sit at the two tips and the inner corner, 71mm hole to hole along each arm, and the tips are 25mm wide. Matching screws come with it. It is supplied as one piece, made in India and packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-CAB-COR-006-IR
“Abiud" Black Antique Iron Corner
₹135/piece
The "Abiud" Black Antique Iron Corner is a flat cast iron corner plate that decorates and guards the corner of a cabinet. Its surface is hammered and dimpled under a black powder-coated finish, with a stepped, irregular outer edge, two raised round studs and four screw holes, and it comes with matching screws.
It is supplied as one piece, made in India and packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-ABI-COR-002-IR
"Darah" Black Antique Cast Iron L-Corner
₹435/piece
The "Darah" Black Antique Cast Iron L-Corner is a large flat L-shaped corner plate for cabinets, measuring 153mm x 153mm x 5mm (153mm = 6 inch per arm). Both arms end in fleur-de-lis tips, and the whole plate has a hammered texture under a black powder-coated finish.
Four screw holes, two on each arm, sit 66mm hole to hole, and each fleur-de-lis tip is 48mm wide. Matching screws come with it. It is supplied as one piece, made in India, and carries a 2 year warranty.
Catalogue code: SH-DAR-COR-007-IR
"Abimelech" Black Antique Iron Corner
₹389/piece
The "Abimelech" Black Antique Iron Corner is a cast iron angle corner measuring 135mm x 135mm (135mm = 5.3 inch each way), made to wrap the corners of cabinets. Its two arms meet at a right angle and end in arrow-shaped tips, and each arm is 31mm deep at the corner with a lightly hammered surface.
Each arm has two screw holes 69mm = 2.7 inch apart, and matching screws are included. The finish displayed is Black Powder Coated. It is supplied as one piece, made in India, packed in U P, India, and backed by a 2 year warranty.
Catalogue code: SH-ABI-COR-003-IR
"Agee" Black Antique Iron L-Corner
₹335/piece
The "Agee" Black Antique Iron L-Corner is a flat cast iron corner plate, 105mm x105mm x 3mm (105mm = 4.1 inch on each arm), for dressing the corners of cabinet doors. Each arm ends in a spear-tipped fleur-de-lis, and the surface has a hammered texture.
The plate has four screw holes, two per arm, set 55mm = 2.1 inch apart, and it comes with matching screws. The finish displayed is Black Powder Coated; it is also offered in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece, made in India, packed in UP, India, and backed by a 2 Year Warranty.
Catalogue code: SH-AGE-COR-001-IR
"Baalath" Black Antique Cast Iron L-Corner
₹156/piece
The "Baalath" Black Antique Cast Iron L-Corner is a compact wrap-around corner guard for cabinets. Its top face sweeps inward in a concave curve between two straight edges and carries a hammered texture under a black powder-coated finish. The sides fold down to cover the edge, with countersunk screw holes for the matching screws supplied.
The overall size is listed as 65mm x 65mm x 34mm; each side is also marked 65.3mm = 2.5 inch, with a 34mm height. It is supplied as one piece, made in India and packed in U P, India, and carries a 2 year warranty.
Catalogue code: SH-BAL-COR-004-IR
Gate Latches14 products
"Jochebed" Black Antique Iron Gate Latch
₹529/piece
The "Jochebed" Black Antique Iron Gate Latch is a 7.5" cast iron latch and lever for manually opening and closing gates, doors, garages, barns, sheds and more.
Both decorative and useful, it includes mounting hardware with matching screws for easy installation and gives door sheds a unique, wonderful look. The black powder-coat finish doubles its strength and makes it rust resistant and durable, and this barn door lock latch is built of sturdy cast iron.
Supplied as one piece with a 2 year warranty, it is made in India and packed in U P, India. Finishes: Black Powder Coated (displayed), Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-JOC-GFLCH-001-IR
"Uzal" Suffolk Iron Hand Forged Latch
₹845/piece
The "Uzal" Suffolk Iron Hand Forged Latch, also called a Suffolk Round Iron Hand Forged Latch, is a hand-forged iron thumb latch with round end plates for gates and doors, 218mm x 160mm x 60mm, supplied as one piece. The thumb lever lifts the bar from its keeper to open the gate.
The set has a curved handle, thumb lever, hooked latch bar, pointed catch, U-shaped staple and strap plate with bridge keeper, all black powder-coated, plus matching screws. Finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered (also Matt Buff Lacquered) and Natural Rust Lacquered. 2 year warranty; made in India, packed in UP.
Catalogue code: SH-UZA-SUF-GLCH-007-IR (also marked SH-SUF-GLCH-007-IR)
"Shilom" Black Antique Iron Gate Latch
₹1,552/piece
The "Shilom" Black Antique Iron Gate Latch, also named the "Shilom" Heavy Duty Black Antique Iron Gate Latch, is a wrought iron flip latch with twisted ring handles, simple to use and quick to install.
Its rust-resistant black powder coated finish suits indoor or outdoor use, and the set includes 12 matching black powder-coated screws. It mounts on wood, drywall, concrete and other suitable walls once both door and wall are checked as suitable, and proper mounting ensures smooth operation. To install, close the gate, align the flip latch bar straight and screw both latch parts on the same side.
It suits cupboards, cabinets, shutters and garage doors, and its rustic, vintage look fits outdoor settings such as barn doors, pool houses, garden sheds and summer houses.
Overall dimensions are 185mm x 112mm x 58mm; the product label marks 285mm = 11.2 inch in length. Supplied as one piece, it is made in India, packed in U P, India, and carries a 2 year warranty. Finishes: Black Powder Coated (displayed), Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-SHI-GFLCH-010-IR
"Titus" Black Antique Iron Gate Latch
₹721/piece
The "Titus" Black Antique Iron Gate Latch is a decorative cast iron latch and lever, 197mm x 112mm x 32mm, for opening and closing gates, doors, garages, barns and sheds by hand. This sturdy wrought iron barn door lock latch has an exclusive black powder-coat finish that doubles its strength and makes it rust resistant and durable.
Its hammered bar ends in a spear tip and carries a round knob between fleur-de-lis end plates. The label reads 197mm = 7.75 inch, 112mm = 4.40 inch and a 31.49mm height. Supplied as one piece with matching screws for easy installation. Finishes: Black Powder Coated, Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered. Made in India, packed in UP; 2 year warranty.
Catalogue code: SH-TIT-GFLCH-012-IR
"Tiberius" Black Antique Plain Iron Gate Latch
₹1,208/piece
The "Tiberius" Black Antique Plain Iron Gate Latch is a cast iron latch for holding a gate shut. It has two twisted ring handles on textured backplates and a bar with a round knob that runs through a guide into a keeper.
It is supplied as one piece with matching screws, in a Black Powder Coated finish, measuring 193mm x 87mm x 47mm overall; the twisted rings span 72mm = 2.8 inch. It is also offered in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-TIB-GFLCH-013-IR; the product label reads SH-TIB-GFLCH-012-IR
"Uphaz" Black Antique Plain Iron Gate Latch
₹1,678/piece
The "Uphaz" is a heavy duty black antique wrought iron gate latch, 17" overall, for farm house gates, main doors, garage doors, shutters, cupboards and more. It is designed to be simple to use and quick to install, and the set includes 12 screws, each in a black powder-coated finish that matches the latch.
The heavy duty iron and black finish give durability and reliability, and the rust-resistant Black Powder Coated finish suits indoor or outdoor use. Its rustic, vintage look makes it a fit for outdoor settings such as barn doors, pool houses, garden sheds and summer houses. It mounts on wood, drywall, concrete and other suitable walls; check that both door and wall are suitable, and mount it properly for smooth operation. To fit it, close the gate, align the flip latch bar straight and install the two latch parts on the same side using screws.
The latch has a hammered-texture lever bar on a round backplate with a trefoil-shaped ring handle, a second ring handle on its own round plate, and two shaped keeper plates. Supplied as one piece with matching screws, made in India.
Finishes: Black Powder Coated
Catalogue code: SH-UPH-GFLCH-014-IR
"Kerioth" Twist Iron Gate Latch
₹678/piece
"Kerioth" twist iron gate latch in black powder coat, fitted with rope-twist ring handles for both faces of a gate. Turning either ring lifts the bar, so the gate opens from either side.
Supplied as one piece in iron with matching screws, it combines a flat bar, staple keeper and catch with scalloped, flower-shaped rosettes joined by a square spindle. Overall dimensions are listed as 154mm x 78mm x 35mm; the marked sizes read 177mm length and 79mm height, with 3.5mm thickness, 98mm height at the ring end and a 71mm ring. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-KER-GFLCH-004-IR
"Karkaa" Oval Ring Iron Gate Latch
₹678/piece
"Karkaa" oval ring iron gate latch with a twisted ring handle on each side of the gate, in black powder-coated iron. Turning either ring lifts the bar, so the gate opens from both sides.
Supplied as one piece with matching screws, it has a flat bar, a staple keeper and a catch, while the rings sit on scalloped, flower-shaped rosettes joined by a square spindle. It is listed at 7" overall; the marked length reads 177mm = 6.9 inch. Other marked sizes are 79mm height at the bar, 95mm rosette height and a 71mm ring. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-KAR-GFLCH-005-IR
"Sabaoth" Black Antique Plain Iron Gate Latch
₹511/piece
The "Sabaoth" Black Antique Plain Iron Gate Latch is a 3.5" decorative and useful cast iron latch and lever for opening and closing gates, doors, garages, barns and sheds by hand. This sturdy wrought iron barn door lock latch has an exclusive black powder-coat finish that doubles its strength and makes it rust resistant and durable.
A pivoting bar with a round knob rests in a hooked keeper on a second plate. Supplied as one piece with matching screws for easy installation, it gives sheds and doors a unique look. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, packed in UP; 2 year warranty.
Catalogue code: SH-SAB-GFLCH-011-IR
"Keturah" MS Gate Latch
₹251/piece
"Keturah" MS Gate Latch in iron with a Black Powder Coated finish, a compact latch for holding a gate or door closed. It measures 110mm x 95mm x 48mm overall (4.3 x 3.7 x 1.8 inch) and is supplied as one piece with matching screws.
The latch has a shaped backplate with four screw holes, a teardrop-shaped lever on a vertical pin, and a long arm with two screw holes at its end. Hole-to-hole spacing is 26mm and 30mm on the backplate and 23mm on the arm. It carries a 2 year warranty, with India as the country of origin. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-KET-GFLCH-006-IR
"Kenites" Plain Ring Iron Gate
₹784/piece
"Kenites" plain ring iron gate latch with smooth, round ring handles for both faces of the gate, finished in black powder coat. Turning either ring lifts the bar to open the gate from inside or outside.
Supplied as one piece in iron with matching screws, it pairs a flat bar, staple keeper and catch with scalloped, flower-shaped rosettes linked by a square spindle. It is listed at 7″ overall; the marked length is 175mm. Further marked sizes include 3.5mm thickness, 100mm height at the ring end and a 69mm ring. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-KEN-GFLCH-03-IR
"Tahath" Black Antique Iron Gate Latch
₹2,475/piece
The "Tahath" Black Antique Iron Gate Latch is a wrought iron flip-bar gate latch, 11.2" (285mm) overall, for gates, main doors, cupboards, shutters and garage doors. Made of heavy duty iron with a rust-resistant black powder-coated finish for durability and reliability, it suits indoor or outdoor use and is simple to use and quick to install.
Two ring-pull handles hang from round backplates, and the latch bar runs through two fleur-de-lis-shaped keeper brackets. The set is supplied as one piece with 12 screws, each black powder-coated to match the latch. It mounts on wood, drywall, concrete and other suitable walls; check door and wall first, as the latch must be properly mounted for smooth operation. To fit, close the gate, align the flip latch bar straight and install both latch parts on the same side with screws.
Its rustic, vintage look suits farm house gates, barn doors, pool houses, garden sheds and summer houses. Other sizes: 254mm (10 inch) bar-to-handle span, 157mm (6.1 inch) height, 98mm backplates and 120mm-long handles. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India; packed in UP, India.
Catalogue code: SH-TAH-GFLCH-009-IR
5.7 Inch "Junia" Black Antique Plain Iron Gate Latch
₹425/piece
The 5.7 Inch "Junia" Black Antique Plain Iron Gate Latch is an iron latch and lever for manually opening and closing gates, doors, garages, barns, sheds and more.
Both decorative and useful, it includes mounting hardware with matching screws for easy installation and gives door sheds a unique, wonderful look. The black powder-coat finish doubles its strength and makes it rust resistant and durable. This barn door lock latch is listed as cast iron and also described as sturdy wrought iron.
Supplied as one piece, it is made in India, packed in U P, India, with a 2 year warranty. Finishes: Black Powder Coated (displayed), Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-JUN-GFLCH-002-IR
"Uphaz" Suffolk Iron Hand Forged Latch
₹845/piece
The "Uphaz" Suffolk Iron Hand Forged Latch is a hand-forged iron Suffolk thumb latch for gates and doors, 220mm x 160mm x 64mm overall. Pressing the thumb lever lifts the bar out of its keeper to open the gate.
The set has a curved handle with spade-shaped end plates, a thumb lever, a hooked latch bar, a pointed catch, a U-shaped staple and a strap plate with a bridge keeper, all black powder-coated, plus matching screws. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It carries a 2 year warranty and is made in India, packed in UP.
Catalogue code: SH-UPH-SUF-GLCH-008-IR (also marked SH-SUF-GLCH-008-IR)
Hasp Staples8 products
"Kadmonites" Black Antique Cast Iron Hasp & Staple
₹415/piece
The "Kadmonites" Black Antique Cast Iron Hasp & Staple is a large padlock hasp latch for securing doors, gates, cabinets, armoires, wardrobes, chests and kitchen cupboards, indoors and outdoors. It is a heavy-duty cast iron lock fitting with a thick, rust resistant black powder-coated finish, and it comes with matching screws.
The hinged hasp has a hammered texture, a scalloped five-hole fixing plate and a pointed tip with a long padlock slot. Overall dimensions are 155mm x 78mm x 35mm. It is supplied as one piece, made in India, with a 2 year warranty. Besides Black Powder Coated, it comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes.
Catalogue code: SH-JEZ-H&S-006-IR
"Jekabzeel" Black Antique Cast Iron Hasp & Staple
₹435/piece
With pointed tips at both ends, the "Jekabzeel" Black Antique Cast Iron Hasp & Staple is a hinged padlock hasp with five fixing holes and a staple plate.
Black iron and a thick, rust-resistant Black Powder Coated finish suit it to indoor and outdoor use on home or office cabinets, armoires, wardrobes, chests, kitchen cupboards, doors and gates, as a heavy-duty antique padlock hasp door latch.
Supplied as one piece with matching screws, it measures 155mm x 78mm x 35mm, with a 75mm x 45mm staple plate. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-JEZ-H&S-005-IR
"Exodus" Brass Hasp & Staple
₹1,275/piece
The "Exodus" Brass Hasp & Staple is a solid brass padlock hasp in a Polished Lacquered finish, with a hammered texture and five fixing holes.
Solid brass and a thick, rust-resistant lacquered finish suit it to indoor and outdoor use on home or office cabinets, armoires, wardrobes, chests, kitchen cupboards, doors and gates, as a heavy-duty lock. It is also described as an antique padlock hasp door latch in black cast iron with a rust-resistant black powder coating.
Supplied as one piece with matching screws, it measures 154mm x 78mm x 35mm and is offered in Polish Lacquered. Made in India, it carries a 5 year warranty.
Catalogue code: SH-EXO-H&S-001-BR
150mm X 44mm Iron Hasp & Staple
₹135/piece
The 150mm X 44mm iron hasp & staple is a longer heavy-duty flat padlock hasp door latch, 150mm x 44mm overall, for doors, gates, cabinets, wardrobes, chests, armoires and kitchen cupboards, indoors and outdoors.
Made of cast iron with a thick, rust-resistant black powder-coated finish, it has a smooth 150mm long, 38mm wide hasp with an oblong padlock slot, a rolled hinge 7mm high and a four-hole hinge leaf, its holes spaced 27mm and 21mm. The separate four-hole staple plate measures 39mm x 44mm, with a 25mm high folded loop and holes spaced 25mm and 26mm.
Supplied as one piece with matching screws, made and packed in India, with a 2 year warranty. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-150X44-H&S-003-IR
"Jezebel" Black Antique Cast Iron Hasp & Staple
₹435/piece
The "Jezebel" Black Antique Cast Iron Hasp & Staple is a hinged padlock hasp with a round end, five fixing holes and a staple plate.
Black iron and a thick, rust-resistant Black Powder Coated finish suit it to indoor and outdoor use on home or office cabinets, armoires, wardrobes, chests, kitchen cupboards, doors and gates, as a heavy-duty padlock hasp door latch.
Supplied as one piece with matching screws, it measures 154mm x 78mm x 35mm, with a 75mm x 45mm staple plate. Also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, it carries a 2 year warranty.
Catalogue code: SH-JEZ-H&S-004-IR; the product label reads SH-JEZ-154 X 78 X 28-H&S-004-IR
110 X 44 Iron Hasp & Staple
₹91/piece
The 110 X 44 iron hasp & staple is a heavy-duty flat padlock hasp door latch, 110mm x 44mm overall, for cabinets, wardrobes, chests, armoires, kitchen cupboards, doors and gates, indoors and outdoors.
Made of iron with a thick, rust-resistant black powder-coated finish, it pairs a smooth 38mm wide hasp and oblong padlock slot with a rolled hinge 7mm high and a four-hole hinge leaf, its holes spaced 17mm and 22mm. The separate four-hole staple plate measures 39mm x 44mm, with a 25mm high folded loop and holes spaced 25mm and 26mm.
Supplied as one piece with matching screws, made and packed in India, with a 2 year warranty. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-110X44-H&S-002-IR
"Exodus" Black Antique Cast Iron Hasp & Staple
₹435/piece
The "Exodus" Black Antique Cast Iron Hasp & Staple pairs a round-ended padlock hasp with a staple plate, and its hinged leaf has five fixing holes.
Black iron and a thick, rust-resistant Black Powder Coated finish suit it to indoor and outdoor use on home or office cabinets, armoires, wardrobes, chests, kitchen cupboards, doors and gates, as a heavy-duty antique padlock hasp door latch.
Supplied as one piece with matching screws, it measures 154mm x 78mm x 35mm, with staple-plate fixing holes 56mm hole to hole. Also offered in Natural Iron Lacquered, Natural Iron Unlacquered, Matt Buff Lacquered and Natural Rust Lacquered. Made in India and packed in U P, India, it carries a 2 year warranty.
Catalogue code: SH-EXO-H&S-007-IR
80 X 44 MS Hasp & Staple
₹75/piece
The 80 X 44 MS hasp & staple is a compact heavy-duty padlock hasp door latch, 80mm x 44mm overall, for cabinets, wardrobes, chests, armoires, kitchen cupboards, doors and gates, indoors and outdoors.
Named as MS and listed as made of iron, it carries a thick, rust-resistant black powder-coated finish. The flat, smooth hasp has a rolled hinge at one end and a padlock slot that closes over the staple loop.
Supplied as one piece with matching screws, made and packed in India, with a 2 year warranty. Finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-80X44-H&S-001-IR
Shelf Brackets30 products
"Levi" Black Antique Iron Shelf Bracket
₹1,678/piece
The "Levi" Black Antique Iron Shelf Bracket is a cast iron shelf bracket, 305mm x 206mm x 7mm (12 inch by 8.10 inch), with lattice openwork around a rosette filling its triangle. Hole-to-hole spacings are 225mm, 139mm and 25mm. The Black Powder Coated finish gives an anti-rustic or vintage look.
It gives a shelf strength and beauty and suits kitchens, garages, corners, utility closets, workshops and backyards, in styles from sleek and modern to farmhouse. Self-installation is easy on home wooden shelves, a floor corner or an altar; it fits large boards of 10.5" inch length or more. Matching screws are included.
It is supplied as one piece, made in India, with a 2 year warranty, and also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-LEV-SBKT-023-IR
"Hammon" Black Antique Iron Shelf Bracket
₹1,195/piece
The "Hammon" Black Antique Iron Shelf Bracket is a cast iron scrollwork shelf bracket, 221mm x 192mm x 6mm, finished in Black Powder Coated.
Spiral scrolls with leaf accents fill the open frame, for an Anti-rustic or vintage style that suits sleek, modern or farmhouse rooms. The bracket gives a shelf both strength and beauty, for kitchens, garages, utility closets, workshops, backyards, wooden shelves, floor corners and altars. The right-triangle design fits boards of 8.5" length or more.
It is supplied as one piece with matching screws for easy self installation. Its arms measure 8.7 inch by 7.5 inch, with 118mm and 116mm hole-to-hole spacing. Made in India and packed in U P, with a 2 year warranty. It also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-HAM-SBKT-014-IR
"Ibneiah" Black Antique Iron Shelf Bracket
₹450/piece
The "Ibneiah" Black Antique Iron Shelf Bracket is a cast iron shelf bracket with an openwork leaf-and-scroll casting in its corner. It has a Black Powder Coated finish for an anti-rustic or vintage look and a mounting hole at each arm's end.
It gives a shelf strength and beauty and suits kitchens, garages, corners, utility closets, workshops and backyards, in styles from sleek and modern to farmhouse. Self-installation is easy on home wooden shelves, a floor corner or an altar; it fits large boards of 10.5" inch length or more. Matching screws are included.
It is supplied as one piece, made in India, with a 2 year warranty, and also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-IBN-SBKT-021-IR
"Iim" Black Antique Iron Shelf Bracket
₹435/piece
The "Iim" Black Antique Iron Shelf Bracket is a cast iron shelf bracket, 102mm x 89mm x 5mm. An open spiral scroll fills its frame. Mounting holes sit 73mm apart on the upright arm and 71mm apart on the base. The Black Powder Coated finish gives an anti-rustic or vintage look.
It gives a shelf strength and beauty and suits kitchens, garages, corners, utility closets, workshops and backyards, in styles from sleek and modern to farmhouse. Self-installation is easy on home wooden shelves, a floor corner or an altar; it fits large boards of 10.5" inch length or more. Matching screws are included.
It is supplied as one piece, made in India, with a 2 year warranty, and also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-LIM-SBKT-022-IR
10 inch "Gadarenes" Black Antique Iron Shelf Bracket
₹875/piece
The 10 inch "Gadarenes" Black Antique Iron Shelf Bracket is a one-piece cast iron shelf support in Black Powder Coated finish, 254mm x 178mm x 5mm overall. A single long curve sweeps between its slim arms, with a rounded corner pad and mounting holes 22mm and 132mm apart.
Shelf brackets give a shelf strength and beauty. This one suits sleek, modern, farmhouse, home and kitchen settings in an anti-rustic or vintage style, and is ideal for kitchens, garages, corners, utility closets, workshops and backyards. It installs easily on home wooden shelves, a floor corner or an altar; the right-triangle bracket is designed to fit a large board of 10.5 inch length or more. Matching screws and a 2 year warranty are included. Made in India and packed in U P, India.
Available finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered
Catalogue code: SH-10"-GAD-SBKT-015-IR
"Ananias" Black Antique Iron Shelf Bracket
₹719/piece
The "Ananias" Black Antique Iron Shelf Bracket is a cast iron right-angle shelf bracket in Black Powder Coated finish, for wooden shelves in kitchens, garages, corners, utility closets, workshops, backyards, floor corners or an altar. Its black, anti-rustic look suits farmhouse and vintage styles.
Open S-scroll castwork fills the frame between the upright and the shelf arm, which ends in a rounded tab with a screw hole. Overall dimensions are listed as 225mm x 154mm x 37mm; the marked height reads 255mm = 8.8 inch, with a 154mm = 6 inch arm, 12mm Thickness and 37mm Height. It fits a board greater than or equal to 8.8 inch in length, installs easily and comes with matching screws. Supplied as one piece and made in India, it carries a 2 year warranty and also comes in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-ANA-SBKT-001-IR
"Jeremiah" Black Antique Iron Hanging Shelf Bracket
₹1,456/piece
The "Jeremiah" Black Antique Iron Hanging Shelf Bracket is a cast iron wall bracket cast as a hummingbird among leaves and flowers, ending in a curled hook. It measures 178mm x 178mm x 6mm, and its wall plate has rounded ends with mounting holes 124mm apart, plus 25mm between the paired holes at one end.
A shelf bracket gives a shelf its strength and adds to its look. This one suits kitchens, garages, corners, utility closets, workshops, backyards, wooden shelves at home, floor corners and altars, is easy to install yourself, and is designed for a board of 10.5 inch length or more.
It is supplied as one piece with matching screws, finished in Black Powder Coated, in an "Anti-rustic" or vintage style. Made in India, with a 2 year warranty.
Catalogue code: SH-JER-HSBKT-026-IR; the product label reads SH-JER-SBKT-026-IR
"Manoah" Black Antique Iron Shelf Bracket
₹3,665/piece
The "Manoah" Black Antique Iron Shelf Bracket is a decorative right-angle shelf bracket for wooden shelves in kitchens, garages, corners, utility closets, workshops, backyards, floor corners or an altar. It is listed as Solid Brass with an Antique Copper finish while its name reads Black Antique Iron; the bracket itself carries a copper-brown antique tone that suits farmhouse and vintage styles.
Openwork leaf-and-vine scrolls fill the triangle between the two arms, with screw holes along both arms. The seller designs it to fit a board greater than or equal to 10.5" in length, for easy self-installation, and it comes with matching screws. Overall dimensions are 305mm x 254mm x 5mm. It is supplied as one piece, made in India, with a 5 year warranty, in Antique Copper, Antique Brass, Polish Lacquered and Satin Nickel finishes.
Catalogue code: SH-MAN-SBKT-001-BR
"Gadarenes" Black Antique Iron Shelf Bracket
₹970/piece
The "Gadarenes" Black Antique Iron Shelf Bracket is a cast iron shelf bracket with a sweeping curved brace, 203mm x 178mm, finished in Black Powder Coated.
Its style suits sleek, modern or farmhouse rooms with an Anti-rustic or vintage feel. The bracket gives a shelf both strength and beauty, for kitchens, garages, utility closets, workshops, backyards, wooden shelves, floor corners and altars. The right-triangle design fits boards of 10.5" length or more.
It is supplied as one piece with matching screws for easy self installation. The arms measure 8 inch by 7 inch with 5mm thickness; the wall-arm holes sit 138mm (5.4 inch) apart. Made in India and packed in U P, with a 2 year warranty. It also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-GAD-SBKT-010-IR
"Manoah" Black Antique Iron Shelf Bracket
₹1,750/piece
The "Manoah" Black Antique Iron Shelf Bracket is a large cast iron right-angle shelf bracket, 305mm x 254mm x 5mm, filled with an openwork vine of leaves and circular scrolls along a diagonal stem. Mounting holes sit 231mm apart on the shelf arm, with 17mm between the corner holes.
A shelf bracket gives a shelf its strength and adds to its look. This one suits kitchens, garages, corners, utility closets, workshops, backyards, wooden shelves at home, floor corners and altars, is easy to install yourself, and is designed for a board of 10.5 inch length or more.
It is supplied as one piece with matching screws. The finish shown is Black Powder Coated, in an "Anti-rustic" or vintage style; Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered are also offered. Made in India, with a 2 year warranty.
Catalogue code: SH-MAN-SBKT-025-IR
6 Inch "Garmites" Black Antique Iron Shelf Bracket
₹275/piece
The 6 Inch "Garmites" Black Antique Iron Shelf Bracket is a one-piece cast iron shelf support in a Black Powder Coated finish. Its triangular frame holds a lattice of linked rings, suiting styles from sleek and modern to farmhouse, anti-rustic or vintage.
A bracket gives a shelf its strength and adds to its look. It suits kitchens, garages, corners, utility closets, workshops and backyards, and installs easily under wooden shelves at home, in a floor corner or at an altar. The right-triangle design fits a large board of 10.5 inch length or more, and matching screws come with it.
Overall dimensions are 150mm x 124mm x 5mm, with screw holes 117mm and 86mm apart. Made in India, it carries a 2 year warranty.
Catalogue code: SH-6"-GAR-SBKT-027-IR
"Hepher" Black Antique Iron Shelf Bracket
₹1,659/piece
The "Hepher" Black Antique Iron Shelf Bracket is a one-piece cast iron shelf support in Black Powder Coated finish, 254mm x 229mm x 5mm overall. A row of turned spindles runs along one arm beneath a large scroll, with mounting holes 31mm and 178mm apart.
Shelf brackets give a shelf strength and beauty. This one suits sleek, modern, farmhouse, home and kitchen settings in an anti-rustic or vintage style, and is ideal for kitchens, garages, corners, utility closets, workshops and backyards. It installs easily on home wooden shelves, a floor corner or an altar; the right-triangle bracket is designed to fit a large board of 10.5 inch length or more. Matching screws and a 2 year warranty are included. Made in India and packed in U P, India.
Available finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered
Catalogue code: SH-HEP-SBKT-019-IR (the product label reads SH-MEP-SBKT-019-IR)
"Gazez" Black Antique Iron Shelf Bracket
₹735/piece
The "Gazez" Black Antique Iron Shelf Bracket is a minimal L-shaped cast iron shelf bracket built as an open double-bar rectangular frame with two equal arms. Its right-triangle shape fits a board of 10.5 inch length or more, for shelves in kitchens, garages, corners, utility closets, workshops and backyards.
A shelf bracket carries the shelf and gives it its strength while adding to its look. This one is cast as one piece in a Black Powder Coated finish with an anti-rustic or vintage style. Matching screws come with it for easy self-installation on wooden shelves, a floor corner or an altar.
Overall dimensions are 288mm x 288mm x 5mm, with each arm given as 9 inch. Also offered in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-GAZ-SBKT-012-IR
10 Inch "Garmites" Black Antique Iron Shelf Bracket
₹989/piece
The 10 Inch "Garmites" Black Antique Iron Shelf Bracket is a cast iron shelf bracket filled with an open lattice of rounded hexagonal cells under a shaped, stepped edge. Its right-triangle shape fits a board of 10.5 inch length or more, for shelves in kitchens, garages, corners, utility closets, workshops and backyards.
A shelf bracket carries the shelf and gives it its strength while adding to its look. This one is cast as one piece in a Black Powder Coated finish with an anti-rustic or vintage style. Matching screws come with it for easy self-installation on wooden shelves, a floor corner or an altar.
Overall dimensions are 254mm = 10 inch by 203mm = 8 inch by 5mm. Also offered in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-GAR-SBKT-011-IR
"Bekah" Black Antique Iron Shelf Bracket
₹642/piece
The "Bekah" Black Antique Iron Shelf Bracket is a compact, plain-lined cast iron shelf bracket for boards greater than or equal to 6" in length, for wooden shelves in kitchens, garages, corners, utility closets, workshops, backyards, floor corners or an altar. Its Black Powder Coated, anti-rustic finish suits farmhouse and vintage styles.
The design is angular and minimal: an L-shaped frame braced by a single diagonal strut, with a rounded, drilled tab at the end of each arm for fixing. Overall dimensions are 156mm x 156mm x 32mm. It installs easily and comes with matching screws. Supplied as one piece and made in India, it carries a 2 year warranty and also comes in Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BAK-SBKT-002-IR
"Epher" Black Antique Iron Shelf Bracket
₹1,109/piece
The "Epher" Black Antique Iron Shelf Bracket is a cast iron wall shelf bracket with a bird, leaf and scroll design. Its right-triangle shape fits a board of 7 inch length or more, for shelves in kitchens, garages, corners, utility closets, workshops and backyards.
A shelf bracket carries the shelf and gives it its strength while adding to its look. This one is cast as one piece in a Black Powder Coated finish with an anti-rustic or vintage style, with round screw lugs on both arms. Matching screws come with it for easy self-installation on wooden shelves, a floor corner or an altar.
Overall dimensions are 182mm = 7.1 inch by 174mm 6.8 inch by 40mm. Also offered in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty.
Catalogue code: SH-EPH-SBKT-008-IR
"Hamonah" Black Antique Iron Shelf Bracket
₹1,407/piece
The "Hamonah" Black Antique Iron Shelf Bracket is a one-piece cast iron shelf support in Black Powder Coated finish, 229mm x 203mm x 6mm overall. Spiral scrolls with leaf-tipped accents fill its frame, with mounting holes 132mm and 118mm apart.
Shelf brackets give a shelf strength and beauty. This one suits sleek, modern, farmhouse, home and kitchen settings in an anti-rustic or vintage style, and is ideal for kitchens, garages, corners, utility closets, workshops and backyards. It installs easily on home wooden shelves, a floor corner or an altar; the right-triangle bracket is designed to fit a large board of 10.5 inch length or more. Matching screws and a 2 year warranty are included. Made in India and packed in U P, India.
Available finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered
Catalogue code: SH-MAM-SBKT-018-IR
"Hanniel" Black Antique Iron Shelf Bracket
₹1,475/piece
The "Hanniel" Black Antique Iron Shelf Bracket is a cast iron shelf bracket, 241mm x 241mm x 59mm, finished in Black Powder Coated.
A curved round brace with turned collars spans an open L-frame, for an Anti-rustic or vintage style that suits sleek, modern or farmhouse rooms. The bracket gives a shelf both strength and beauty, for kitchens, garages, utility closets, workshops, backyards, wooden shelves, floor corners and altars. The right-triangle design fits boards of 8.8 inch length or more.
It is supplied as one piece with matching screws for easy self installation. Each arm measures 9.5 inch, and the curved brace spans 233mm (9.1 inch) with 26mm thickness. Made in India and packed in U P, with a 2 year warrant. It also comes in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-HAN-SBKT-013-IR
"Ezekiel" Black Antique Iron Hanging Shelf Bracket
₹1,275/piece
The "Ezekiel" Black Antique Iron Hanging Shelf Bracket is a cast iron wall bracket shaped as a scrolling vine with two leaves and a perched bird, ending in a curled scroll. It measures 206mm x 231mm x 6mm, and its flat wall plate carries two mounting holes 182mm apart.
A shelf bracket gives a shelf its strength and adds to its look. This one suits kitchens, garages, corners, utility closets, workshops, backyards, wooden shelves at home, floor corners and altars, is easy to install yourself, and is designed for a board of 10.5 inch length or more.
It is supplied as one piece with matching screws. The finish shown is Black Powder Coated, in an "Anti-rustic" or vintage style; Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered are also offered. Made in India, with a 2 year warranty.
Catalogue code: SH-EZE-HSBKT-022-IR
"Hamath" Black Antique Iron Shelf Bracket
₹845/piece
The "Hamath" Black Antique Iron Shelf Bracket is a one-piece cast iron shelf support with a curved brace and a four-lobed cut-out at its centre, finished in Black Powder Coated. Its look ranges from sleek and modern to farmhouse, anti-rustic or vintage.
A bracket gives a shelf its strength and adds to its look. It suits kitchens, garages, corners, utility closets, workshops and backyards, and installs easily under wooden shelves at home, in a floor corner or at an altar. The right-triangle design fits a large board of 10.5 inch length or more, and matching screws come with it.
Overall dimensions are 192mm x 170mm x 5mm, with screw holes 111mm and 89mm apart. Made in India, it carries a 2 year warranty.
Catalogue code: SH-HAM-SBKT-028-IR
Showing 20 of 30 in Shelf Brackets
Show 10 moreFloor Registers6 products
"Chesed" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Chesed" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a cast iron vent cover for floor and wall duct openings. Its grille has a geometric lattice of short and long rectangular slots set in a plain flat frame, and a cast iron louver tray with horizontal slats sits on the back.
A register covers a heating or cooling duct opening and lets air pass through the grille. This one is supplied as one piece in a Black Powder Coated finish with matching screws, and measures 140mm x 295mm x 8mm overall. Its country of origin is India, it is packed in U P, India, and it comes with a 2 year warranty.
Catalogue code: SH-CHE-REG-004-IR
"Abimael" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Abimael" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a rectangular cast iron vent cover for wall or floor duct openings, measuring 140mm x 295mm x 8mm. Its grille is cut in a pattern of circles and star shapes inside a flat border, and the back carries a ribbed cast iron louver panel.
A register covers a vent opening while letting air pass through. The finish is black powder coated. It is supplied as one piece with matching screws, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-BET-REG-001-IR
"Bethphage" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Bethphage" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a 140mm x 295mm x 8mm cast iron vent cover with a scrolling heart-and-leaf grille, made for wall or floor duct openings. A flat border frames the fretwork, and the back carries a ribbed cast iron louver panel.
A register covers a vent opening while letting air pass through. The finish is black powder coated. It is supplied as one piece with matching screws, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-BET-REG-002-IR
"Dabbasheth" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Dabbasheth" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a cast iron vent cover whose grille forms a crossed diamond lattice of V-shaped bars and diamond openings. The pattern sits inside a plain flat rectangular frame, with a cast iron louver tray of horizontal slats on the back.
A register covers a heating or cooling duct opening in a floor or wall and lets air pass through the grille. It is supplied as one piece in a Black Powder Coated finish with matching screws, and measures 140mm x 295mm x 8mm overall. Its country of origin is India, it is packed in U P, India, and it comes with a 2 year warranty.
Catalogue code: SH-DAB-REG-006-IR
"Dorcas" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Dorcas" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a one-piece cast iron vent cover for a wall or floor opening, finished in Black Powder Coated. Its rectangular frame holds a row of gently curved vertical louver slats that let air pass through, and the underside carries raised ribs running along its length.
Overall dimensions are 140mm x 295mm x 8mm, about 5.5 inch by 11.6 inch. Matching screws come with it. It is made in India, packed in UP, India, and carries a 2 year warranty.
Catalogue code: SH-DOR-REG-005-IR
"Casluhim" Black Antique Iron Wall and Floor Register with Cast Iron Louver
₹2,540/piece
The "Casluhim" Black Antique Iron Wall and Floor Register with Cast Iron Louver is a cast iron vent cover for wall or floor duct openings, its grille cut with four-petal flower medallions between Greek-key fret panels at each end. It measures 140mm x 295mm x 8mm, with a flat border at the front and a ribbed cast iron louver panel at the back.
A register covers a vent opening while letting air pass through. The finish is black powder coated. It is supplied as one piece with matching screws, made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-CAS-REG-003-IR
Bath Hardware2 products
"Cock" Black Antique Iron Towel Ring
₹589/piece
Shaped as a rooster, the "Cock" Black Antique Iron Towel Ring is a one-piece cast iron towel holder: a detailed rooster wall plate sits above a round hanging ring, finished in Black Powder Coated. The plate carries two screw holes 50mm apart, and matching screws come with it.
It is also offered in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Overall dimensions are 216mm x 119mm x 29mm (8.5 x 4.6 inch), and the ring measures 120mm = 4.7 inch. Made in India and packed in UP, India, it carries a 2 Year Warranty.
Catalogue code: SH-COC-TOW-001-IR
"Eliasaph" Black Antique Iron Towel Ring
₹675/piece
Made of wrought iron, the "Eliasaph" Black Antique Iron Towel Ring is a one-piece towel holder with a textured, shaped wall plate and a round ring with a beaded collar at its base, finished in Black Powder Coated. The plate is 88mm wide with two screw holes 63mm apart, and matching screws come with it.
It is also offered in Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Overall dimensions are 177mm x 141mm x 41mm (7 x 5.5 inch); the ring is 155mm = 6.1 inch long and 6.8mm thick. Made in India and packed in UP, India, it carries a 2 Year Warranty.
Catalogue code: SH-ELI-TOW-002-IR
Cabin Hooks17 products
4.7 Inch "Magdalene" Brass Cabin Hook
₹435/piece
Our Door Hardware presents you with a high quality Cabin Hook that can widely be used in indoor or outdoor. For any windows you fancy and change the look of your windows immediately! no More boring Cabin Hook but impress your guests with this Cabin Hook finish to display Polished lacquered finish. This Cabin Hook can be used for Good looking, It can be used for home window that is durable and appealing to the eyes, as well as functional. The uniquely designed steel Cabin Hook in satin nickel finish is perfect to stand out from the rest.” A beautiful and characterful Cabin Hook.
Supplied as One Piece
Made of Solid Brass
Finish Displayed – Polished Lacquered
Overall Dimensions – 4.7"
Country of Origin – India
Packed by – Shristy Hardware U P, India.
5 year warranty
"Neiel" Brass Cabin Hook
₹765/piece
Our Door Hardware presents you with a high quality Cabin Hook that can widely be used in indoor or outdoor. For any windows you fancy and change the look of your windows immediately! no More boring Cabin Hook but impress your guests with this Cabin Hook finish to display Polished lacquered finish. This Cabin Hook can be used for Good looking, It can be used for home window that is durable and appealing to the eyes, as well as functional. The uniquely designed steel Cabin Hook in satin nickel finish is perfect to stand out from the rest.” A beautiful and characterful Cabin Hook.
Supplied as One Piece
Made of Solid Brass
Finish Displayed – Polished Lacquered
Overall Dimensions – 7"
Country of Origin – India
Packed by – Shristy Hardware U P, India.
5 year warranty
11.2 Inch "Jonah" Black Antique Iron Cabin Hook
₹795/piece
This 11.2 Inch "Jonah" Black Antique Iron Cabin Hook is a longer window hook for indoor or outdoor use, supplied as one piece in Black Powder Coated with matching screws.
Its hooked arm drops into a separate eye plate to hold a window. Listed as both wrought iron and cast iron, it is durable, appealing to the eyes and functional, and its unique design stands out and changes a window's look immediately. Ringed collars decorate the arm, and each oval plate has two screw holes.
It measures 11.2" overall (286mm = 11.2 inch), with 254mm = 10 inch between plates, 46mm plates, a 28mm Height at the hook end and screw holes 27mm = 1 inch apart. Other finishes: Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-11.2"-JON-CHK-006-IR
5.4 Inch "Nekoda" Black Antique Iron Cabin Hook
₹127/piece
The 5.4 inch "Nekoda" black antique iron cabin hook is a window hook in a Black Powder Coated finish. A cabin hook holds a window in place, open or shut: the hooked arm pivots on the eye of one oval plate and drops into the eye of the matching plate. Each plate has two screw holes, and the iron has a hammered black surface.
It suits indoor or outdoor use, and it is durable, appealing to the eye and functional. Its material is given as both cast iron and wrought iron. Overall length is 139mm = 5.4 inch, with 105mm = 4.1 inch between the plates, a 46mm plate, 28mm height at the eye and 27mm = 1 inch between screw holes. It is supplied as one piece with matching screws and a 2 year warranty, and is made in India.
Finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered.
Catalogue code: SH-5.4"-NEK-CHK-008-IR
"Jonah" Black Antique Iron Cabin Hook
₹355/piece
The "Jonah" black antique iron cabin hook is a 6.8" cast iron window hook in a black powder coated finish, made to hold a window shut or propped open, indoors or outdoors.
Supplied as one piece with matching screws, it has an L-shaped hook, a stem with a ringed collar and a bulb-shaped collar near the eye, and oval eye and keeper plates, each with two screw holes. It is made of cast iron and also described as wrought iron. Its label reads 6Inch “Jonah”, while overall dimensions are 6.8", with a 43mm by 34mm eye plate.
Durable, functional and good-looking, it gives any window a characterful look. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-JON-CHK-001-IR
Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered
7.5 Inch "Nekoda" Black Antique Iron Cabin Hook
₹544/piece
At 7.5 inches, the "Nekoda" black antique iron cabin hook is a wrought iron window hook in a Black Powder Coated finish. It holds a window in place, open or shut: the long hooked arm pivots on the eye of one oval plate and drops into the eye of the matching plate. Each plate has two screw holes, and the iron has a hammered black surface.
It suits indoor or outdoor use, and it is durable, appealing to the eye and functional. Overall length is 191mm = 7.5 inch, with 157mm = 6.1 inch between the plates, a 46mm plate, 28mm height at the eye and 27mm = 1 inch between screw holes. It is supplied as one piece with matching screws and a 2 year warranty, and is made in India.
Finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered.
Catalogue code: SH-7.5"-NEK-CHK-009-IR
9.2 Inch "Jonah" Black Antique Iron Cabin Hook
₹595/piece
At 9.2 inches, the "Jonah" Black Antique Iron Cabin Hook is a window hook for indoor or outdoor use, supplied as one piece in Black Powder Coated with matching screws.
Its hooked arm drops into a separate eye plate to hold a window. Listed as both wrought iron and cast iron, it is durable, appealing to the eyes and functional, and its unique design stands out and changes a window's look immediately. Ringed collars decorate the arm, and each oval plate has two screw holes.
It measures 9.2" overall (236mm = 9.2 inch), with 204mm = 8 inch between plates, 46mm plates, a 28mm Height at the hook end and screw holes 27mm = 1 inch apart. Other finishes: Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-9.2"-JON-CHK-005-IR
6 Inch "Leviticus" Black Antique Iron Cabin Hook
₹630/piece
The 6 inch "Leviticus" cabin hook is a black antique-style wrought iron hook and eye that holds a window shut or fastened open. It suits indoor or outdoor use and is built to be durable, functional and appealing to the eye, giving any window a characterful look.
The hammered hook swings from an eye plate and drops into a matching staple plate. Each plate measures 38mm x 32mm with four screw holes at 23mm x 18mm centres, and the eye and staple stand 26mm high. Overall size is listed as 6"; the marked dimensions read 151mm = 5.9 inch, with 115mm = 4.5 inch from hook tip to eye. The finish is Black Powder Coated, and Matt Buff Lacquered, Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered are also offered. Supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-LEV-CHK-002-IR
4.6 Inch "Machir" Brass Cabin Hook
₹485/piece
Our Door Hardware presents you with a high quality Cabin Hook that can widely be used in indoor or outdoor. For any windows you fancy and change the look of your windows immediately! no More boring Cabin Hook but impress your guests with this Cabin Hook finish to display Polished lacquered finish. This Cabin Hook can be used for Good looking, It can be used for home window that is durable and appealing to the eyes, as well as functional. The uniquely designed steel Cabin Hook in satin nickel finish is perfect to stand out from the rest.” A beautiful and characterful Cabin Hook.
Supplied as One Piece
Made of Solid Brass
Finish Displayed – Polished Lacquered
Overall Dimensions – 4.6"
Country of Origin – India
Packed by – Shristy Hardware U P, India.
5 year warranty
6.5" "Obadiah" Black Antique Iron Cabin Hook
₹295/piece
The 6.5" "Obadiah" black antique iron cabin hook is a decorative window hook in a Black Powder Coated finish. It holds a window in place, open or shut: the hooked bar pivots on the eye of one plate and drops into the eye of the other. Both plates have scalloped edges and four screw holes, and the bar carries a ringed collar at its centre and a turned knob by the pivot, all with a hammered black surface.
It suits indoor or outdoor use, and it is durable, appealing to the eye and functional. Its material is given as both cast iron and wrought iron. Overall dimensions are 6.5". It is supplied as one piece with matching screws and a 2 year warranty, and is made in India.
Finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered.
Catalogue code: SH-6.5"-OBA-CHK-012-IR
4.6 Inch "Nekoda" Black Antique Iron Cabin Hook
₹109/piece
The 4.6 inch "Nekoda" black antique iron cabin hook is a compact cast iron window hook in black powder coated finish, made to hold a window shut or propped open, indoors or outdoors.
Supplied as one piece with matching screws, it has a textured black surface, a hooked arm that tapers into a ring eye, and oval eye and keeper plates, each with two screw holes. It is made of cast iron and also described as wrought iron. Overall dimensions are 4.6", with 82mm = 3.2 inch between plate centres, 46mm = 1.8 inch plates and a 28mm height.
Durable and functional with a characterful look, it suits any window. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-4.6"-NEK-CHK-007-IR
Available finishes: Black Powder Coated, Matt Buff Lacquered, Natural Iron Lacquered, Natural Rust Lacquered
7.5 Inch "Jonah" Black Antique Iron Cabin Hook
₹465/piece
The 7.5 Inch "Jonah" Black Antique Iron Cabin Hook is a window hook for indoor or outdoor use, supplied as one piece in Black Powder Coated with matching screws.
Its hooked arm drops into a separate eye plate to hold a window. Listed as both wrought iron and cast iron, it is durable, appealing to the eyes and functional, and its unique design stands out and changes a window's look immediately. Ringed collars decorate the arm, and each oval plate has two screw holes.
It measures 7.5" overall (192mm = 7.5 inch), with 156mm = 6.1 inch between plates, 46mm plates, a 28mm Height at the hook end and screw holes 27mm = 1 inch apart. Other finishes: Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-7.5"-JON-CHK-004-IR
12.9 Inch "Jonah" Black Antique Iron Cabin Hook
₹835/piece
The 12.9 Inch "Jonah" Black Antique Iron Cabin Hook is a long window hook for indoor or outdoor use, supplied as one piece in Black Powder Coated with matching screws.
Its hooked arm drops into a separate eye plate to hold a window. Listed as both wrought iron and cast iron, it is durable, appealing to the eyes and functional, and its unique design stands out and changes a window's look immediately. Ringed collars decorate the arm, and each oval plate has two screw holes.
It is listed at 13" overall, measuring 330mm = 12.9 inch, with 307mm = 12 inch between plates, 46mm plates, a 28mm Height at the hook end and screw holes 27mm = 1 inch apart. Other finishes: Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-12.9"-JON-CHK-006-IR
11.6 Inch "Nekoda" Black Antique Iron Cabin Hook
₹805/piece
The 11.6 inch "Nekoda" black antique iron cabin hook is a window hook in a Black Powder Coated finish. It holds a window in place, open or shut: the long hooked arm pivots on the eye of one oval plate and drops into the eye of the matching plate. Each plate has two screw holes, and the iron has a hammered black surface.
It suits indoor or outdoor use, and it is durable, appealing to the eye and functional. Its material is given as both cast iron and wrought iron. Overall length is 296mm = 11.6 inch, with 262mm = 10.3 inch between the plates, a 46mm plate, 28mm height at the eye and 27mm = 1 inch between screw holes. It is supplied as one piece with matching screws and a 2 year warranty, and is made in India.
Finishes: Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered.
Catalogue code: SH-11.6"-NEK-CHK-011-IR
5.3 Inch "Jonah" Black Antique Iron Cabin Hook
₹135/piece
This 5.3 inch "Jonah" black antique iron cabin hook holds a window shut or fixed open and comes in a Black Powder Coated finish. It is made of Cast Iron and is also described as wrought iron. It suits indoor or outdoor use and is meant to be durable, functional and characterful, giving a window a distinctive look.
The hook pivots on a ring set in one oval plate and drops into a raised loop on the other. Each plate has two screw holes, and a band of rings decorates the shaft. It measures 136mm = 5.3 inch overall and 104mm = 4 inch between plate centres, with 46mm plates, a 28mm height and 27mm = 1 inch between screw holes.
It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. It is also offered in Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered.
Catalogue code: SH-5.3"-JON-CHK-003-IR
9.6" Nekoda Black Antique Iron Cabin Hook
₹675/piece
The 9.6" "Nekoda" Black Antique Iron Cabin Hook is a plain-armed window hook for indoor or outdoor use, supplied as one piece in Black Powder Coated with matching screws.
Its hooked arm drops into a separate eye plate to hold a window. Listed as both wrought iron and cast iron, it is durable, appealing to the eyes and functional, and its unique design stands out and changes a window's look immediately. The textured arm widens toward the pivot, and each oval plate has two screw holes.
It measures 9.6" overall (244mm = 9.6 inch), with 212mm = 8.3 inch between plates, 46mm plates, a 28mm Height at the hook end and screw holes 27mm = 1 inch apart. Other finishes: Natural Iron Lacquered, Natural Iron Unlacquered, Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty.
Catalogue code: SH-9.6"-NEK-CHK-010-IR
7 Inch "Leviticus" Black Antique Iron Cabin Hook
₹730/piece
At 178mm = 7 inch overall, the 7 inch "Leviticus" cabin hook is a black antique-style wrought iron hook and eye for holding a window shut or fastened open. It suits indoor or outdoor use and is built to be durable, functional and appealing to the eye, a characterful change from a plain window fitting.
It is also described as a 6" wrought iron cabin hook; the hammered hook measures 152mm = 6 inch from tip to eye, within a listed overall size of 7". It swings from an eye plate into a matching staple plate, each 38mm x 32mm with four screw holes at 23mm x 18mm centres, and the eye and staple stand 26mm high. The finish is Black Powder Coated, with Matt Buff Lacquered, Natural Iron Lacquered, Natural Iron Unlacquered and Natural Rust Lacquered also offered. Supplied as one piece with matching screws, made in India, with a 2 year warranty.
Catalogue code: SH-LEV-CHK-013-IR
Casement Stay6 products
12.50 Inch "Joses" Antique Cast Iron Window Casement Stay
₹445/piece
12.50 Inch "Joses" antique window casement stay in cast iron, with a finish listed as Black Powder Coated. It props a casement window open at a chosen position.
The long flat arm has five holes along its length and finishes in a rounded, upturned tip, with a hinged base plate at the other end. Two pin plates with upright pegs fix to the frame and catch the arm. Overall size is listed as 12.50".
It is supplied as one piece with matching screws, made in India, with a 2 year warranty. Finishes offered: Black Powder Coated, Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-12.50"-JOS-STY-005-IR
10 Inch "Susanna" Antique Cast Iron Window Casement Stay
₹435/piece
This 10 Inch "Susanna" Antique Cast Iron Window Casement Stay keeps a casement window propped open at set points. Its textured arm carries four holes and a rolled curl tip, with a hinged base plate at one end and two patterned pin plates for the frame.
Overall dimensions are 264mm (10.3 inch) x 53mm x 34mm, with a 136mm hole span and 46mm pin plates. Supplied as one piece in cast iron with matching screws, it is finished in Black Powder Coated; Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered are also offered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-SUS-STY-002-IR
10 Inch "Ruth" Antique Cast Iron Window Casement Stay
₹435/piece
The 10 Inch "Ruth" Antique Cast Iron Window Casement Stay holds a casement window open at a chosen position. Its flat arm has four holes and a curled scroll tip, with a hinged base plate at one end and two pin brackets for the frame.
It measures 284mm x 53mm x 41mm overall, with a 133mm hole span and 45mm pin brackets. Supplied as one piece in cast iron with matching screws, it is finished in Black Powder Coated, with Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered also offered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-RUT-STY-001-IR
12.50 Inch "Tertius" Designer Cast Iron Window Casement Stay
₹455/piece
12.50 Inch "Tertius" designer window casement stay in cast iron, with a finish listed as Black Powder Coated. It holds a casement window open at a set position.
The textured arm has five holes and ends in a tight curled scroll, with a hinged base plate at the other end. Two pin plates with upright pegs fix to the frame and catch the arm. Overall size is listed as 12.50".
It is supplied as one piece with matching screws, made in India, with a 2 year warranty. Finishes offered: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-12.5"-TER-STY-006-IR
10 Inch "Tertius" Designer Cast Iron Window Casement Stay
₹455/piece
Built to hold a casement window open where needed, the 10 Inch "Tertius" Designer Cast Iron Window Casement Stay has a textured arm with four holes and a tight spiral scroll tip, plus a hinged base plate and two pin plates for the frame.
Overall dimensions are listed as 280mm x 53mm x 41mm; the marked sizes read 280mm = 11 inch, 54mm and 42mm Height. Supplied as one piece in cast iron with matching screws, it comes in Black Powder Coated, Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-TER-STY-003-IR
10 Inch "Joses" Antique Cast Iron Window Casement Stay
₹455/piece
With its rounded, upturned grip, the 10 inch "Joses" casement stay is an antique-style cast iron window stay in Black Powder Coated finish, used to prop a casement window open at a chosen position or hold it closed. The flat arm pivots on a hinged base plate, and the holes along the arm fit over a stay pin.
It measures 264mm x 53mm x 41mm, with the 264mm length running along the arm and the 53mm width across the base plate. Two stay plates come with it, their marked dimensions reading 46mm, 25mm and 16mm. Natural Iron Unlacquered, Natural Iron lacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes are also offered. Supplied as one piece with matching screws, made in India, with a 2 year warrant.
Catalogue code: SH-JOS-STY-004-IR
Window Fasteners3 products
"Baalah" Black Antique Iron Window Fastener
₹575/piece
"Baalah" black antique window fastener in cast iron with a Black Powder Coated finish, a casement fastener whose curved handle ends in a rounded, rolled knob and locks a window sash closed.
The set pairs the handle plate with a hooked keep plate and a slotted keep plate. Overall dimensions are listed as 4.5". The marked dimensions read 125mm = 4.92 inch overall, with the slotted keep 87mm = 3.4 inch long and 23mm wide, and the handle plate 69mm = 2.7 inch tall.
It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Finishes offered: Black Powder Coated, Matt Buff Lacquered, Natural Iron Lacquered and Natural Rust Lacquered.
Catalogue code: SH-BAA-FNR-003-IR
"Abel" Black Antique Iron Window Fastener
₹423/piece
The "Abel" Black Antique Iron Window Fastener is a cast iron latch that secures a casement window shut. Its handle sweeps down into a curled tail and turns on a backplate, with a flat slotted plate and a raised catch plate alongside, all in a textured black finish.
Overall dimensions are listed as 4"; the handle measures 105mm = 4.1 inch from top to tail. Supplied as one piece in cast iron with matching screws, it is finished in Black Powder Coated, with Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered also offered. Made in India, packed in U P, India, with a 2 year warranty.
Catalogue code: SH-ABL-FNR-001-IR
"Amnon" Black Antique Iron Window Fastener
₹318/piece
"Amnon" black antique window fastener in cast iron with a Black Powder Coated finish, a casement fastener whose tapered lever handle latches a window shut.
Two hammered plates with rounded, lobed ends each carry four screw holes; the handle pivots on one plate and catches in the keep on the other. Overall dimensions are listed as 3". The marked dimensions read 72mm = 2.83inch high and 60mm = 2.36 inch across, with a plate 26mm wide at its lobes.
It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Finishes offered: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered.
Catalogue code: SH-AMN-FNR-002-IR
The company
Shristy Hardware is an Aligarh, Uttar Pradesh-based manufacturer of brass and iron door, cabinet, window, gate and home hardware, led by door knockers (92 products), hinges (84), door letters and numerals (75) and door pulls (70). Its focus is antique design for high-end residential and commercial projects, and every product is 100% handmade in India, with attention to detail in each piece. Door hardware is the largest family: door knockers (92), letters and numerals (75), door pulls (70), hooks (45), door bolts (22), door handles (20), letter plates and mail slots (11), push plates (11), aldrops (9) and door knobs (8). Door accessories cover hinges (84), door bells (18), bell pushes (17), door studs and nail domes (15), sign plates (14), handrail brackets (4), keyhole covers and escutcheons (4), cylinder pulls (2), door stoppers (2) and iron door grills (2). Cabinet hardware covers drawer pulls (26), cabinet knobs (19), cabinet pulls (19), drop pulls (13), corners (7) and castors (2); home hardware covers shelf brackets (30), floor registers (6) and bath hardware (2); window hardware covers cabin hooks (17), casement stays (6) and window fasteners (3); gate hardware covers gate latches (14) and hasp staples (8). Finishes offered are Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Black Powder Coated, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass and Satin Nickel. The fittings suit homes, offices and hospitals, in contemporary and antique styles. Custom and bulk orders are taken, customers can personalise their orders, and the team helps buyers choose the right fittings for each space. A proprietorship, Shristy Hardware works as manufacturer, wholesaler and retailer, committed to consistency in quality and reasonable prices.
| Legal name | Shristy Hardware |
| GST | 09AWOPH6212M1Z4 |
| Location | Aligarh, Uttar Pradesh, India |
| Category | Door Hardware |
| Speciality | Shristy Hardware Designs have been delivering Antique Design for high-end residential, commercial projects. From Brass and Iron to individually Antique Design for Door hardware fittings, attention to detail is found in every product is handmade |
| Custom orders | Made to the buyer's spec |
| Address | Church Compound Banna Devi |
| shristyhardware@gmail.com | |
| Catalogue | 695 products across 34 categories |
| Services | Custom hardware to order, Bulk orders |
| GST registration | 2021 |
| Legal status | Proprietorship |
| Delivery | SHIPS WITHIN 7-14 BUSINESS DAYS. WE WILL SHIP ANYWHERE IN INDIA. |
| Express shipping | We can arrange for express shipping. Please contact our sales team before ordering. |
| Free delivery | FREE DELIVERY ON ORDER ABOVE Rs. 1000 |
| Returns | We accept return and damage and Replacement in 2 business days. |
| Business hours | Phone 8 AM to 8 PM, Monday to Friday; WhatsApp 24/7 |
| Other email | info@shristyhardware.com |
Contact this supplier
What customers say
From the seller's own website
“Good size for a Main or Safety Door accessory. The finishing is neat & the overall product quality is very good. Definitely recommended for those who wish to add a little class & sophistication to their doors.”Rashmin
| facebook.com/shristyhardware | |
| instagram.com/shristyhardware | |
| in.pinterest.com/shristyhardware | |
| twitter.com/ShristyHardware |
What's verified
Shared by the seller
In their own words
412Product photographsTheir own catalogue photography.
Disclaimer
Information shown here is compiled from the details provided by the seller.
Videos & social