All products

Turbo Core

Vidarir turbo core for Cummins engines with the HX35 turbocharger, listed as HX35 217 for the TCL excavator, part number 3537132, OEM number 3802770. It is a replacement cartridge for HX35 series turbochargers on excavators, gensets, telecom power units, trucks, buses and marine engines. Lost power, lower efficiency or unusual turbo noise signal a worn core, and on working machinery that means downtime. A new core brings back the engine's power, torque and fuel economy. It is made from high-temperature-resistant materials for continuous-duty and marine conditions, fits directly in place of the original to cut downtime and maintenance cost, and meets or exceeds original equipment specifications. The core has a grey machined backplate and a compressor wheel with alternating full and short blades. Part numbers: 3575217, 3598871, 3539653, 3591975, 3536469, 3593339, 3593142, 3593887, 3595018, 3598337, 4035497, 4027572 OEM numbers: 3537133, 3804962, 3591976, 3598566, 3593341, 3593143, 65.09100-7081, 4035498, 4035499, A3919121, A3919119

Sofa

Luxury classic sofa with gold-trimmed carved woodwork, an ornate carved crest and scrolled arms framing ivory button-tufted upholstery. The seat and arm rolls carry a cream-and-gold damask pattern above a pleated front, and three matching decorative cushions complete the look. Built for comfort and style, it suits upscale interiors and adds a regal touch to any room, with craftsmanship made for lasting durability.

Door Pulls

With a raised ornamental pattern worked along its front face, the "Deuel" Brass Door And Cabinet Pull is a curved solid brass pull handle for doors and cabinets, 150mm x 20mm x 35mm overall. The grip sweeps in a gentle S-curve and tapers toward its lower end, with a fixing hole at the top end and another near the bottom. The finish displayed is Polished Lacquered, and the pull is offered in Antique Brass; the metal shows an aged brass tone. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty. Catalogue code: SH-DEU-DOP-006-IR

Clay Kitchenware Pots

Indian clay cookware pot with lid by "Ajay Pots", a red clay pot for cooking and serving that is microwave oven and stove safe. It can provide many years of fantastic cooking and is easy to clean. The pot is wide and round-bellied, with a broad rolled rim, small handles at the rim, incised rings around the body and a fitted lid topped with a knob. It is made to custom size. Minimum order is listed as 100 cartons; it is also given as 1000 pieces. Production capacity is 1,00,000 per month, with delivery in 30 - 45 days from Tuticorin or Chennai in export, multi colour or bulk packing; payment is by T/T (bank transfer). Catalogue code: CHK002

Turbo Core

Vidarir turbo core for the Mahindra XUV 500, part number 104339021385, also listed as 0302DAM01291N and 104319290036. It optimises airflow and boost pressure to lift the engine's power output and responsiveness on the road. Designed as a direct replacement for the original turbo core and engineered for an exact fit on the XUV 500, it goes in straightforwardly so the vehicle is back on the road quickly. The core is made to withstand extreme temperatures and pressures for long-lasting reliability. It has a silver machined backplate around the compressor wheel, with a pipe stub and a black fitting at one side. Sold per piece. Part numbers: 104339021385, 104339821385, 0302DAM01291N, 104319290036 Fits: Mahindra XUV 500

Full Face Helmet

KYT Striker 2V full face helmet in Neutron Red, a sport-touring helmet with extreme shapes, an aerodynamic design and attractive graphics. KYT presents the Striker as the latest addition to its family, a feature-packed helmet for sport touring. The helmet comes with ISI certification. The Neutron graphic mixes bright red splashes and the KYT name over a gloss black and grey shell. It has a clear outer visor with an inner dark drop-down sun visor, vents on top and at the chin, and a rear spoiler.

Door Pulls

Bow-shaped and mounted on round backplates, the "Dodai" Brass Door And Cabinet Pull is a solid brass pull handle for doors and cabinets, measuring 190mm x 53mm x 40mm overall. The smooth, rounded grip curves out between the two plates, each drilled with countersunk screw holes, and the surface has a bright, polished gold tone. The finish displayed is Polished Lacquered, and the pull is offered in Polish Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty. Catalogue code: SH-AAR-DOP-005-BR

Fog Lamps

LIU HJG Original 25W DC 12V dual-colour single LED auxiliary fog light for motorcycles, scooters, cars and off-roaders. Its 3-in-1 triple reflection array combines a crystal pure white high beam, a golden yellow low beam for rain and fog, and a Blue Devil Eye DRL ring. The die-cast aviation aluminium alloy housing has rear fins for rapid heat dissipation and is IP67 waterproof, shockproof and dustproof. The black body has a chrome front ring and U-shaped bracket, with a three-wire lead, bolt, nut and Allen key supplied. It mounts on crash bars, leg guards or custom brackets, or in bumpers and grilles. Fits: Royal Enfield, KTM, Bajaj Pulsar, TVS Apache, Yamaha MT15, commuter bikes

Band Sealer

The Sepack CS3H Smart is an MS-body continuous band sealer with a white sealing head and a digital display panel with push-button controls. Pouches and bags are carried along an orange conveyor belt past the sealing rollers to a stainless steel plate at the outfeed end, and the conveyor frame stands on feet with knobs. It is used for sealing plastic bags, packaging pouches and food packaging in a continuous run along the conveyor.

Dressing Tables

This modern cane dressing table with a triple oval mirror is a handcrafted bedroom vanity finished in elegant ivory, blending modern elegance with handcrafted detailing. It brings a warm, sophisticated look to the bedroom. Three oval mirrors in carved frames with bow crests rise above a cane-pattern back panel. Below sit a curved marble-look tabletop, beautifully carved drawers with gold-toned trim and cabriole legs. A tufted vanity stool with a white button-tufted seat, carved frame and stud trim completes the set.

Ashok Leyland Dost

Lower Arm Lh — spare part for Ashok Leyland Dost.

Hooks

The "Kabzeel" Black Antique Iron Hook is a cast iron double wall hook for hanging coats, hats and bags. A long upper arm sweeps up and out to a flat oval end, while a shorter lower hook curls up to a rolled tip, and a small brace joins the upper arm to the backplate. The waisted backplate carries four screw holes. It has a Black Powder Coated finish and overall dimensions of 117mm x 29mm x 88mm. The hook is supplied as one piece with matching screws, is made in India and carries a 2 year warranty. Catalogue code: SH-KAB-HOK-031-IR

Desi Ghee Sweets

Sohan Papdi in a 400 GM pack is a crispy, delectable Indian sweet that can be enjoyed on any occasion. It belongs to the desi ghee sweets range. The square pieces show fine, flaky layered strands under a pale top, garnished with sliced almonds and pistachio slivers. Delivery takes 2-3 days within Rajasthan, 3-5 days within the region (UP, Uttarakhand, HP, Delhi, Punjab, Haryana) and 3-5 days to the rest of India.

Measuring Instrument

Micrometer stand with a 110 mm round base, a height of 100 mm and a weight of about 1.500 kg, used to hold a micrometer steady so both hands stay free for measuring. The round base and upright block have a grey textured finish. A black knurled knob on a threaded screw closes the clamp, and the bright metal jaws have V-shaped seats to grip the micrometer frame. The minimum order is 1 unit and delivery takes 1 week. Payment is by cash in advance or cheque, and free samples are available within a certain price range.

Namkeen

Dalmoth is a crunchy, savoury namkeen mixture of lentils, nuts and spices, sold in a 400 gm pack. Crunchy lentil clusters are combined with a medley of nuts and aromatic spices, giving a balance of tangy and spicy flavour with a touch of sweetness. The mix is a heap of dark whole lentils and fine yellow strands with flecks of green. It works for everyday snacking, for parties, or as a tasty side with drinks, and suits festive occasions and celebrations.

Hinges

The "Gareb" Black Antique Iron Cabinet Hinge is a wrought iron hinge for hanging cabinet doors. Its two smooth, flat leaves form a butterfly outline with pointed lobes, meet at a central knuckle and carry six screw holes. The finish displayed is Black Powder Coated. It also comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are 50mm x 88mm x 10mm (1.9 in by 3.4 in). Hole centres sit 35mm apart across the middle pair, 58mm across the outer pair and 24mm apart vertically. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-GAR-HNG-025-IR

Outdoor Coffee Table

Rectangular outdoor coffee table, or center table, with a toughened glass top on a powder-coated aluminium frame woven in Synthetic Wicker. It measures W120 x D60 x H41 Cm. The grey woven frame curves down at each end into slim, tapered legs. Skilled craftsmen hand weave the design, and it comes with a 10-year warranty* for manufacturing defects. It belongs to a luxury range made from quality raw materials for long-lasting outdoor durability. Catalogue code: LCO/048/011 (collection LCO-048) Wicker colours: Java Brown, Java Brown STR, Golden Bronze, Luke Golden, Ebony Golden STR, Ebony Silver STR, Natural Honey, Camel Brown STR, Coffee Brown STR, Khaki STR, Silver Grey, Ash Grey STR, Ivory, Off White, Pearl White, Vanilla White

Banana Slicer Machine

The "Sharma Banana Slicer Machine" is a semi-automatic banana chips making machine, also sold as a banana wafer machine, banana slicing machine or banana chips cutting machine, for snack shops, small food businesses and home-based snack production. It slices bananas for chips and wafers and cuts down repetitive hand slicing when larger quantities are made. The stainless steel body carries an aluminium die set, a carbon blade for sharp cutting and 3 die types. The machine has a box-shaped base, a round cutting head with a central feed tube and a wide curved stainless steel tray. It is easy to operate and clean, and runs on a domestic power supply through a 1 HP single phase electric motor at 960 RPM and 220 V. It also suits small-scale food-processing units, cafeterias and entrepreneurs starting a banana chips business. It handles the slicing stage; frying, seasoning, cooling and packing are done on separate equipment. Approximate capacity is 150 to 200 Kg, power consumption 0.75 Unit and approximate weight 55 Kg.

Saree Stories

Maheshwari look semi silk saree with golden zari weaving, made for weddings, parties and festive occasions. The soft semi silk blend is light in weight, and fine gold zari lines run across the body in stripes and checks. A wide gold zari pallu and border carry a dense diamond pattern with a patterned edge, giving the saree a luxurious gleam and a regal touch, and a matching blouse piece comes with it. It suits a traditional, elegant look with lightweight comfort and an easy, graceful drape. Length is 6.5 meters with blouse, free size, and care is dry clean only. It comes in Fuchsia, Lime green, Indigo, Green and Black:black. HSN: 52084121

Hinges

The "Abdias" Black Antique Iron False Hinge Front is a 167mm cast iron decorative strap-hinge front for doors, finished in Black Powder Coated. A false hinge front fixes to the face of a door or cabinet to give it the look of a traditional strap hinge. The "Abdias" has a textured antique-look surface, a fleur-de-lis style end with lobed wings and a spear-point tip, with five screw holes. Overall dimensions are 167mm 49mm x 5mm: it measures 167mm = 6.6 inch long, 49mm across the tip and 5mm thick. The holes sit 112mm and 140mm apart along the strap, with 47mm between the two end holes. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-ABD-HNG-051-IR

Glove

BSDDP half finger motorcycle racing gloves in black, sold in Large, XL and XXL. They are scratch proof and made of premium material that is water resistant, with open fingertips. Listed under the MT 15 and R15 V4. Each glove has a hard moulded knuckle shell, padded finger guards, red accent panels with the BSDDP logo, white contrast stitching, a dotted grip palm and an adjustable wrist strap.

Outdoor Floor Lamps

Outdoor floor lamp 80 measures W80 x D80 x H125 Cm, with synthetic wicker woven over a powder coated aluminium frame and weather proof lighting fixtures. The honey-toned, egg-shaped shade is open at the top, stands on slim splayed legs and holds a light low inside. Completely hand woven by skilled craftsmen for long lasting outdoor durability, this luxury lamp comes with 10 years of warranty* for any manufacturing defects. Catalogue code: LCO/036/002 (collection LCO-036) Wicker colours: Java Brown, Java Brown STR, Golden Bronze, Luke Golden, Ebony Golden STR, Ebony Silver STR, Natural Honey, Camel Brown STR, Coffee Brown STR, Khaki STR, Silver Grey, Ash Grey STR, Ivory, Off White, Pearl White, Vanilla White

Atta Chakki

1 HP stoneless atta chakki for home: an automatic domestic flour mill and atta maker from Sharma with six MS cutters, six screens and an MFD wooden cabinet, for grinding fresh flour in the kitchen. An automatic grinding circuit and overload protection make daily use simple. The enclosed grinding chamber turns wheat and other compatible grains, pulses and rice into flour, and the six screens give a choice of textures. The 100% copper-winding power-saver motor is built with energy efficiency in mind, and the cleaning and safety features keep upkeep easy. Grinding at home lets a family choose its grains and grind fresh whenever needed, keeping the bran, germ and endosperm when whole grain is milled. It is offered with warranty. The cabinet has a glossy brown front panel with a white wheat-ear motif, grey side panels with silver-coloured trim, a black recessed handle under the top, a side vent grille, a "Silver" badge and small black feet. Specifications: 6 Cutter, 1 HP single phase at 2880 RPM, 220 V, power consumption 0.75 Unit, capacity approx. 6 to 8 Kg, weight approx. 50 Kg, size 19 X 13 X 32.

Letters And Numerals

A 2" broad numeral 6 in solid brass with a polished lacquered finish, made as a house or address number for a door or plaque. It is supplied as one piece with matching screws and fixes through two countersunk holes, one near the top of the curve and one at the base of the loop, for easy self-installation. Being solid brass, the piece is durable and weatherproof, and the flat-faced digit brings style and function together for a simple, good-looking way to number a door. Made in India and packed in U P, India, it carries a 5 year warranty. Catalogue code: SH-2"-BRD-NUM-6-BR

Sofa Three Seaters

Three seater outdoor sofa measuring W240 x D90 x H77 Cm., with a powder-coated aluminium frame fully upholstered in "Agora" fabrics. Its cushions combine "Agora" 100% solution dyed acrylic fabrics from Spain with high density foam, and each cushion has a removable fabric cover that can be washed when required. Part of a luxury outdoor furniture range, it is built from raw materials chosen for long-lasting outdoor durability. The design is completely hand woven by skilled craftsmen and comes with 10 years of warranty* for any manufacturing defects. Cushion colours: Blanco, Avena, Toffee, Basalto, Amarillo, Mostaza, Azafran, Rojo, Brasserie, Terracota, Verde Claro, Verde, Turkis, Indigo, Azul Metal frame colours: Black Textured, Dark Brown Textured, Dark Grey Textured, Honey Textured, Light Grey Textured, White Textured Catalogue code: LCO/061/003