All products

SS Mortice Handles

ASH-022 is an SS mortice door handle from the "Premium Range" with a flat lever pierced by two square cut-outs side by side, set on a rectangular backplate to work the latch of a mortice lock. It comes in 125mm, 200mm and 250mm sizes. The handle has a bright polished silver finish throughout, with a square-edged plate fixed by four screws. It is offered on a plate with a standard lever keyhole, on a plate with a cylinder (euro-profile) cutout, and on a shorter plate with a plain face. Catalogue code: 37323

Double Charge Series

Ivory marble-look porcelain tile from the Double Charge Series, design 5006, sized 600 x 600 mm in a matt finish and suited to floors and walls in residential and commercial spaces. Its pale off-white ground is lifted by fine golden-orange veins that run diagonally, with soft cream clouding between them. Across a laid floor the light tone stays consistent, and the delicate veining repeats gently from tile to tile. Thickness is about 9 mm. Each box contains 4 tiles, covering 1.44 sq. mtr. Catalogue code: 5006

Spoiler Carbon Fiber

Wing carbon fiber spoiler compatible for the Ford Mustang GT Sport, a high-mount rear wing that stands on raised supports above the boot lid. A rear wing like this gives the Mustang a track-car profile and works on the airflow over the back of the car. The wide, flat blade has an exposed carbon weave finish, a raised lip along its trailing edge and two slots on top where the supports attach. The set consists of the wing blade, two carbon end plates, two black angled stands, two black mounting plates and a bag of bolts. Fitted, the wing sits high and wide across the rear of the car, spanning almost its full width. Catalogue code: GA0383

Designer Collection - Wash Basin Pedestal

The "Linea Set - 223" is a designer wash basin with pedestal from the Designer Collection, with a deep pink-red bowl and large red flowers painted on a white body. The rounded basin sits on a tall pedestal that flares gently at the foot. Bold red blooms with green centres, long green blade leaves and fine black dotted stems are spread across the front of the basin and up the pedestal.

Heat Shrink & Protective Sleeves

Dull finish PVC sleeve roll for electrical insulation and cable protection, made in sizes from 3mm to 25mm diameter. The matte sleeving slides over wires and cable runs to insulate them, bundle cables together and protect electrical work in industrial use. It comes coiled as a roll with a grey, matte surface. The 23 sizes step up 1mm at a time, so the sleeve can be matched closely to the wire or bundle it has to cover. Sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm Catalogue code: SI0400103-SI0400125

Hub Axles

Thick bicycle hub axle (B), grooved on both sides and supplied with a fitting set of 9, in sizes 3/8" x 5.5" / 6.5" / 7" / 7.5" x 26 TPI. A hub axle is the shaft a wheel hub turns on, holding the wheel in the bicycle frame or fork. The bright silver threaded shaft carries a cone, washer and nut at each end. It comes in BNP, ZP or black finish. Catalogue code: Hub Axle (B)

Wood Strip

8093 Turmeric Wood is a 200x1000mm digital glazed porcelain floor tile from the Wood Strip series with a rustic reclaimed-plank look: warm honey and tan tones, weathered grain, knots, fine cracks and pale worn patches. Each tile is 11 mm thick and made to ISO 13006. A box holds 5 tiles, covers 1 Sq. m. and weighs about 25.5 Kgs. Water absorption is 3% - 6% and modulus of rupture Min 22 Ind. Min 20 N/mm2. The tiles resist all acids and alkalis apart from hydrofluoric acid and its compounds, and rate Class AA, min for household chemicals and Class 1, min for staining. Catalogue code: 8093

Spoiler Abs

"Monster Black" rear spoiler for the Maruti Suzuki Ertiga 2021, a roof-mounted wing for the Ertiga's tailgate. A rear spoiler sits at the top of the tailgate and carries the roofline out over the rear glass. This one is finished in gloss black, with a wide, flat top surface and ends that curve downward at each side. A single support leg runs beneath the centre, and round fittings are set into the top at the centre and near each end. Catalogue code: GA0401

Special Universal Connectors

12-pole female connector with ECM special wire for Ashok Leyland New Model vehicles, made for the ECM wiring of the harness. It plugs into its matching male connector to carry the twelve circuits. The black housing holds twelve terminal cavities in two rows of six, with a locking latch on top, and the black leads run out through a yellow sleeve. Wire length is 9 inches, and it is packed 10 pieces to a pack. Catalogue code: SH2101201

Kitchen Series

Kitchen Series design 41043 is a 450 x 300 mm wall tile set of four designs built on a 3D-look cube pattern. The base tile 41043-L carries the cubes in white and soft beige, and 41043-D repeats them in deeper taupe-brown with white. Two highlighter tiles add a artwork over the cubes. 41043-HL-1 shows a white teapot with a black floral print, a tipping cup with a splashing drink and cream biscuits, with "BREAKFAST" lettering. 41043-HL-2 shows a patterned teapot, three stacked cups, round biscuits, a fork and a tea infuser with coffee beans, also lettered "BREAKFAST". The tiles are 100% water proof and are made for wall use. Catalogue code: 41043, 41043-L, 41043-HL-1, 41043-HL-2, 41043-D

Ice Cup

Printed glass "Turkey Hill" ice cup set from EAGLE: 6 footed dessert cups with long-handled spoons, for ice cream, sundaes and fruit desserts. The cups have wide rounded bowls on short stems and round feet. Most are decorated with green and yellow circle prints, and one carries a pink and lilac leaf print. Each cup has a small EAGLE sticker, and the set comes in a box with green, brown, pink and white stripes, printed with the name "Turkey Hill".

Front Grill

All-black GTR front grill for the Mercedes Benz GLA H247 Pre Facelift, sold as the GTR Black version: the vertical slats, horizontal crossbars, centre ring and oval surround share one gloss black finish. The vertical slats give the GTR look in a single colour, with the round centre opening left for the badge. Mounting clips line the top edge, with lugs along the base and brackets at each side. The grill sits in the front opening of the car, shielding the radiator area while air flows through between the slats. Listed as imported. Catalogue code: GA0175

Double Charge Tiles

Smoke Pista double charge tiles, 60x60 CM, bring a polished marble look from the "Smoke - Polished" collection. The face is off-white to ivory with light beige clouding, crossed by fine brown veins and flecks that give a warm, stone-like pattern. The polished surface has a glossiness of > 70% (Gloss meter 60°), with water absorption of < 0.05% (ISO-10545-3) and breaking strength of > 2200 N (ISO-10545-4). Surface abrasion resistance is Class PEI 4 (2100 revolutions) (EN 154), scratch hardness is 5 on the Mohs scale (EN 101), stain resistance is Class 5 (ISO-10545-14) and reaction to fire is Class A1 - A1 fl. Smoke Ash, Smoke Crema and Smoke White complete the collection.

Glazed Porcelain Tiles

Flakes Bianco is a pale, near-white glazed porcelain tile with a stone look and a Carvin finish, shown in the 60x120 CM size. Its soft grey-white face is dotted with fine grey and white flecks, giving a light, evenly speckled stone surface. Laid as large rectangular tiles with thin joints, the flecked pattern flows from tile to tile. Bianco sits in the Flakes collection alongside Grey, Pearl, Beige, Nero and Oat, and the collection comes in eight sizes from 30x60 to 120x180 CM. Available sizes (CM): 100x100, 120x180, 60x60, 60x120, 30x60, 80x80, 80x160, 120x120

Glazed Porcelain Tiles

Belinda Gold glazed porcelain tiles: a polished, marble-look tile in 60x120 CM, with flowing gold-brown veins across a bright white face. The collection also includes Belinda Grey. Besides 60x120, the tile comes in 100x100, 120x180, 60x60, 30x60, 80x80, 80x160 and 120x120 CM. Key values: water absorption < 0.05% (ISO-10545-3), breaking strength > 1800 N (ISO-10545-4), glossiness > 92 GU (Gloss meter 60°), Mohs scratch hardness 5 (EN 101), stain resistance Class 5 (ISO-10545-14) and reaction to fire Class A1 - A1 fl.

Single Row Cylindrical Roller Bearings

KAZI NU1015 single row cylindrical roller bearing (NU type): 75 mm bore (ID), 115 mm outer diameter (OD), 20 mm width.

Glossy Series

Marble-look wall tile 11218 from the Glossy Series, 450 x 300 mm, offered in four designs: 11218-L, 11218-HL-1, 11218-D and 11218-HL-2. The palette pairs a pale cream marble with fine white veining and a dark brown marble streaked with copper and white veins. 11218-L is the cream marble across the whole face, and 11218-D is the dark brown marble. 11218-HL-1 sets a dark brown band above a cream band, while 11218-HL-2 alternates four horizontal bands of dark and cream. The tiles are listed as 100% water proof and are made for walls, with a matching floor tile available in 300 x 300 mm. Catalogue code: 11218, 11218-L, 11218-HL-1, 11218-D, 11218-HL-2

JCB Connectors & Fuse Boxes

JCB 31 pole male connector with 4mm and 5mm deluxe wire, the round mating half for 31-circuit harness connections on JCB equipment and other heavy machinery. It lets a multi-wire loom section be plugged in or removed in one step for service. It has a round black housing with a dark contact insert and yellow wire leads. Each connector comes with 9 inches of 4mm and 5mm deluxe wire, packed 10 pcs to a pack. Catalogue code: SJCB00044

Door Hardware

A wrought iron transom bolt, also known as a door slide bolt or cane bolt with strike, holds heavy doors, transoms and garden gates firmly in place, and also suits windows. The bolt is wrought iron with a corrosion-resistant coating, finished in black with a textured, artisanal surface. A long channel guide with four screw holes carries the sliding bolt, which is moved by a round thumb knob and ends in a curled grip. A separate strike plate with its own screw holes receives the bolt for smooth operation and firm locking. This heavy-duty bolt has a classic slide-bolt design that fits a rustic farmhouse or industrial look, and it is easy to install. Catalogue code: GMC-10011-K

Diaries

Diaries with custom covers, from full-colour printed hardbound diaries to leather-look executive styles. Printed hardbound diaries carry wraparound artwork on the cover, with white page blocks and ribbon markers. Leather-look diaries come in brown, red, grey, black, blue, green, maroon and beige, with gold-colour cover lettering in executive, desk-plan and personal formats and graduated sizes down to a small pocket diary. Other options include a diary with a strap closure and pen loop, and a ring-bound organiser with a card window.

Marble Series

Design 1042 from the Marble Series is a light cream porcelain tile, 600 x 600 mm with a matt finish, for floors and walls in residential and commercial spaces. The pale, warm-grey surface has a faint mottling that keeps it calm and close to plain. Set in a checkerboard with a tan-brown tile, it forms the light half of a crisp two-tone pattern. Each tile is about 9 mm thick, and one box of 4 tiles covers 1.44 sq. mtr. Catalogue code: 1042

Plain Series

Design 6059 from the Plain Series is a 600 x 600 mm matt porcelain tile for floors and walls that sets a large white marble-look diamond, with fine grey veining, against brown wood-grain corners. Interlaced wood-look bands in two browns frame the diamond, with a small white square at each edge. Laid together, the tiles alternate white diamonds and brown wood-look squares in a diagonal checker. The tile serves residential and commercial spaces and contemporary projects. Each tile is about 9 mm thick, and a box holds 4 tiles covering 1.44 sq. mtr. Catalogue code: 6059

2021 PGVT 60x60cm

Smoke White is an almost plain white 600 x 600 mm PGVT (polished glazed vitrified tile) crossed by a single soft band of gold-beige veining with faint grey wisps, from the Marble Series of the 2021 PGVT collection. With water absorption of ≤0.050 % (ISO-10545-3) and min 90% glossiness (glossometer), the tile offers easy cleaning, germ resistance, frost resistance, sun / UV resistance, a flexible body and high resistance to breaking. One box holds 4 pcs, weighs about 28.5 Kgs and covers 1.44 sqm.

Glossy Series

Glossy Series design 11061 is a 450 x 300 mm wall tile set built on a pattern of square panels with bevelled-look edges. It comes in three designs: a plain white base tile, a highlighter that alternates white squares with white lily sprays on a light dotted ground, and a taupe base tile in the same square pattern. The tiles are 100% water proof, and a matching floor tile is available in 300 x 300 mm. Catalogue code: 11061-L, 11061-HL, 11061-D

Ceramic Wall Tiles

3042 L is a white glossy ceramic wall tile, 60x30 CM, in the 3042 collection. Its Texture & Decor face is divided into eight rounded-square panels in white with faint grey mottling, each outlined by a thin grey-blue border, with a small ornament where the panel corners meet. Water absorption is > 12-18% (ISO-10545-3), breaking strength > 800 N and modulus of rupture > 18 N/mm2 (ISO-10545-4), and stain resistance Class 5 (ISO-10545-14). Frost resistance (ISO-10545-12) and thermal shock resistance (ISO-10545-9) are both rated Pass. The 3042 collection also includes 3042-H1-PART-1 and 3042 D. Catalogue code: 3042 L