All products

Glossy Series

Glossy Series 11106 wall tile, 450 x 300 mm, a grey marble-look set for walls with a large-leaf decor. It comes as 11106-L, a near-white marble-look tile with faint grey veining; 11106-HL, a decor tile of sweeping leaves in navy, slate grey, blue, tan and green, separated by white lines, with small floral prints set into some leaves; and 11106-D, a mid-grey marble-look tile. These are 100% water proof tiles, with a matching floor tile available in 300 x 300 mm. Catalogue code: 11106, 11106-L, 11106-HL, 11106-D

Headlight Projector

AES F1 3-inch Bi-LED headlight projector with a blue lens and universal fit, for all types of halogen headlight. One projector gives both high and low beam, with intense brightness, wide-angle coverage and a sharp cut-off that keeps the light focused on the road and spares oncoming traffic from glare. The blue lens adds a sporty, custom look. Each projector has a durable aluminum housing with heat dissipation, a grey shroud around the lens and a cooling fan at the back; setup is plug-and-play, with professional fitment recommended. The box rates the lamp beads at 6000K±500 and 4000LM±10% in total, with fan plus physical module heat conduction for cooling. Two projectors come in the AES F1 box. Catalogue code: GA0003

Rims & Spokes

"ENDRIC II TYPE" bicycle rim, model SC-RS-105, offered in 16"/20"/24"/26" X 1.75", 20"/24"/26" X 1 3/8" and 26" X 1 1/2" X 1 5/8" sizes. As a wheel rim, it holds the tyre and takes the spokes from the hub. It has a silver finish, a flat-sided channel profile with hooked edges, and spoke holes spaced along the centre. Catalogue code: SC-RS-105

Spoiler Carbon Fiber

Pro carbon fiber lip spoiler suitable for the BMW 5 Series G30, offered for both the LCI and Pre LCI versions of the car. This slim boot-lid lip follows the trailing edge of the G30 saloon's boot and finishes in a gently raised kick, adding a crisp dark line above the tail lights. The carbon fiber shows an exposed weave under a gloss finish, and it stands out clearly against a white body. A lip spoiler of this size refines the rear silhouette and tidies the airflow leaving the boot lid. Catalogue code: GA0387

Single Row Cylindrical Roller Bearings

KAZI NUP218 single row cylindrical roller bearing (NUP type): 90 mm bore (ID), 160 mm outer diameter (OD), 30 mm width.

Brass Terminals

The 6.4 Female Side Feed is a 0250 series 6.4mm female brass terminal with a side feed design, giving an alternative cable routing for automotive and high-current wiring. It is made of CuZn-63/37 brass in a gold tone, with a locking tongue in the receptacle and a serrated crimp barrel. It takes cable of 1.90-2.90 sq. mm, and its tab size is listed as Ø 6.00 mm. Standard packing is Spool-4000 or Cut-1000. Dimensions: 7.50±0.10, 5.05±0.10, 4.55±0.15, 3.70±0.10, 22.00±0.20, 20.00±0.20, 6.65±0.10 Catalogue code: SWT025020

Front Grill

BMW 2 Series F44 front grill in glossy black with a dual bar design, two slats paired side by side in each kidney opening. Taking the place of the stock kidney grille in the front bumper, it lets air through to the cooling system and gives the front end a darker face. The kidneys taper to a point at their outer lower corners, with the surround and every slat in the same gloss black. Sold as an imported part. Catalogue code: GA0232

3D Series

Floral 3D Series tile 3020 is a 600 x 600 mm matt porcelain floor and wall tile in a sand-beige tone, printed with six-petal flowers whose petals carry a grid of small raised-look squares. Large and small flowers are linked by short line segments and dots, all shaded to stand out from the surface. Laid together, the tiles form a continuous scattered-flower pattern. It works in residential and commercial spaces. Each tile is about 9 mm thick, with 4 tiles and 1.44 sq. mtr. per box.

Complete Fuse Box Systems

Universal fuse box with 60 AMPS fuse. Configuration: 6 wire, 10 point. Main wire long with 8mm & 10mm deluxe wire.

Bonnet / Hood Metal

GT500 KR style aluminum bonnet for the Ford Mustang, a replacement hood that brings the GT500 KR look to the front of the car. A bonnet covers the engine bay, and the vents in this design let hot air escape from beneath it. The bonnet has a dark matt finish and a raised, sculpted centre. A large louvred vent runs down the middle with rows of horizontal slats, flanked by two angled louvred side vents, and two round fittings sit near the front edge. Catalogue code: GA0403

Special Universal Connectors

Tata 3 pole female connector with 6mm & 8mm deluxe wire.

Double Charge Tiles

Grasse Pearl White is a polished 60x60 CM double charge tile with a marble look, in the Grasse collection. Its bright white face carries fine light grey flecks and short streaks, giving a crisp, softly textured white surface. The polished finish has glossiness over 70% (gloss meter 60°). Water absorption is under 0.05% (ISO-10545-3), breaking strength is over 2200 N (ISO-10545-4) and apparent density is over 2.40 g/cc (DIN 51082). Surface abrasion resistance is Class PEI 4 (EN 154), Mohs scratch hardness is 5 (EN 101), and the tile passes frost resistance testing (ISO-10545-12). Stain resistance is Class 5 (ISO-10545-14) and reaction to fire is Class A1 - A1 fl.

Architectural Surfaces

Oryol Gris is a light grey architectural surface tile in 30x120 CM, part of the Oryol collection, in the Carvin finish with a Texture & Decor look. Its face is a pale, even grey with a fine speckled grain and gentle tonal variation. Laid in horizontal rows, the long planks form a calm, uniform surface with subtle banding between tiles. The Oryol collection also offers Gris Liner, along with Ash, Beige, Grey, Natural, Talc and White, each of these also in a Liner version.

Wood Strip

Design 8009 brings a warm orange-tan wood look to a 200x1000mm digital glazed porcelain floor tile in the Wood Strip series. A soft, mottled figure and fine grain lines give the surface an even, warm tone that suits a wood effect floor in any room of the home. Each tile is 11 mm thick and made to ISO 13006. A box holds 5 tiles, covers 1 Sq. m. and weighs about 25.5 Kgs. Modulus of rupture is Min 22 Ind. Min 20 N/mm2, and thermal shock resistance is Min. 10 cycle. The tile resists all acids and alkalis apart from hydrofluoric acid and its compounds. Catalogue code: 8009

Single Thrust Ball Bearings

KAZI 51210 thrust ball bearing: 50 mm bore (ID), 78 mm outer diameter (OD), 22 mm width.

Chain Wheel

Utility cut bicycle chain wheel (D), offered in cottered and cotterless versions, in 44T / 46T / 48T CP. The chain wheel and crank drive the chain from the pedals; the cottered version holds the crank on the bottom bracket axle with a cotter pin, while the cotterless version fixes it with a bolt. The utility cut chainring has a star-shaped centre with spokes reaching out to the toothed ring, finished in silver grey along with the crank arm.

Decor

Floral print paper photo frame, handcrafted for elegant home decor display. The ivory border carries pink flowers on green stems alongside wavy pale blue stripes, and a pink inner border surrounds a rectangular, portrait-format opening. A fold-out stand at the back lets the frame stand upright on a flat surface.

Wooden Tiles

Home Tortora wooden tile, a wood-look plank in 20x120 CM with a matt finish with structure. Its grey-taupe face carries fine wood grain and small dark knots, and the planks lay in long staggered rows. A 30x120 CM size is also offered. Water absorption is < 0.05% and breaking strength > 1800 N. The surface is rated Class PEI 4 for abrasion, 5 on the Mohs scale for scratch hardness and Class 5 for stain resistance, and the tile passes frost and thermal shock tests. Slip resistance (COF) is > 0.40 dry, <0.40 wet; reaction to fire is Class A1 - A1 fl. The Home collection also comes in White, Verde, Natural, Honey, Brown and Beige.

Tapered Roller Bearings

KAZI 33118 tapered roller bearing: 90 mm bore (ID), 150 mm outer diameter (OD), 45 mm width.

Bathroom Latches 100MM

Kodia 027 bathroom latch handle, 100MM, with a scroll-shaped lever on an arched backplate for bathroom doors. The backplate has rounded ends with stepped shoulders, a brushed satin finish and four screw holes, two at each end. The curved lever flares toward a rounded tip and has a bright polished edge. It is part of the Kodia SS 304/zinc mortice handle range, listed there among the bathroom latches. Catalogue code: 027

Packaging Machinery

This fully automatic filling and sealing machine (FFS) forms pouches from LD film, fills them and seals them. It is a tall unit with a bowl hopper and weighing section on top, a film roll holder, a forming funnel, two digital control panels and castors. It covers filling ranges of 2-100 GM and 50-1000 GM at 5 to 7 pouches per minute depending on product, handles grains, pulses, dry fruits and dry powder, and can be customised with a coding machine to print date and batch number.

Lassa Bianco Spiga is a 30x120 CM matt tile with a concrete look, the patterned Bianco version of the Lassa collection. Its light grey-white face has a soft, mottled concrete grain, crossed by bands of fine diagonal ridges that form triangular blocks, so the pattern reads as a subtle tone-on-tone texture. The matt finish gives a low-sheen surface. The tile comes in one size, 30x120 CM. The Lassa collection also comes in Bianco, Steel, Steel Spiga, Mint, Mint Spiga, Aqua and Aqua Spiga.

Door Knobs

An egg door knob with a smooth, plain oval head, used to pull open and close a door. It mounts on a round rose with a stepped edge, joined by a short cylindrical neck. The surface is a bright, mirror-polished golden brass tone with clean, simple lines. Listed under Door Knobs.

Headlight Glass

Headlight lens cover for the Audi A4 B8, 2020 - 2022 models, in a wide, wraparound clear shape. Set over the headlamp housing, a new outer lens takes the place of one that has gone cloudy, yellowed or scratched, letting the lamp shine through a clean face again. The cover is transparent across its front, with a dark mounting flange along the rear edge and lower lip. Listed as Imported. Catalogue code: GA0473

Glossy Series

Glossy Series 11105 wall tile in 450 x 300 mm, a four-face set with two decor designs for walls. 11105-L is an off-white marble-look tile with fine crackle veining, and 11105-D is a warm light grey version of the same look with brown veining. 11105-HL-1 carries a white leaf pattern shaded for a raised look, with dotted backgrounds and a few rainbow-coloured leaves. 11105-HL-2 carries a flower pattern on white rings, with petals in blue, coral, green, orange and purple around dark grey centres. These are 100% water proof tiles, and a matching floor tile is available in 300 x 300 mm. Catalogue code: 11105, 11105-L, 11105-HL-1, 11105-D, 11105-HL-2