All products

Single Row Cylindrical Roller Bearings

KAZI NUP209 single row cylindrical roller bearing (NUP type): 45 mm bore (ID), 85 mm outer diameter (OD), 19 mm width.

Bonnet Carbon Fiber

Carbon fiber bonnet with a glass cut-out, suitable for the BMW 3 Series F90 M5; the car is also listed as BMW 3 Series E90. It is listed as suitable for BMW. The bonnet shows an exposed carbon weave in a gloss finish. A large clear window sits in a raised centre section, so the engine bay is on display, and a louvred vent with three slots runs down each side of the window. As a replacement bonnet, it covers the engine bay while changing the look of the front of the car. Catalogue code: GA0889

Wood Strip

Warm sand beige with tight, straight lines and scattered small pores, design 8003 is a 200x1000mm digital glazed porcelain floor tile in the Wood Strip series, made to ISO 13006. Its even, linear stone-style texture suits floors in any room of the home. Each tile is 11 mm thick. A box holds 5 tiles, covers 1 Sq. m. and weighs about 25.5 Kgs. Water absorption is 3% - 6%, crazing resistance is 4 cycle at 7.5 bar min, and the tile resists all acids and alkalis except hydrofluoric acid and its compounds. Surface quality is min. 95% free from visible defects. Catalogue code: 8003

2021 Matt 60x60cm

Maple Wood Wange is a 600 x 600 mm matt GVT (glazed vitrified tile) with a deep reddish-brown wood-grain face showing knots and oval grain loops, marked as a new design. It is part of the 2021 Matt 60x60cm series of "Polished Glazed Vitrified Tiles". Listed features are germs resistance, a flexible body, sun / UV resistance, easy cleaning, high resistance to breaking and frost resistance. Each box holds 4 Pcs covering 1.44 sqm and weighs approx. 28.5 Kgs; tile thickness is listed as approx. 9.

Double Row Spherical Roller Bearings

KAZI 22224 spherical roller bearing: 120 mm bore (ID), 215 mm outer diameter (OD), 58 mm width.

Wooden Tiles

Relief Choco is the brown wood-look shade of the Relife collection, a 20x120 CM wooden tile in a matt with structure finish. The face carries a greyish mid-brown grain with flowing arched figure and small knots, and the planks lay with offset joints for a continuous timber effect. The tile lists water absorption of < 0.05% (ISO-10545-3), breaking strength of > 1800 N (ISO-10545-4) and surface abrasion resistance of Class PEI 4 (2100 revolutions). Stain resistance is Class 5, frost resistance a Pass, reaction to fire Class A1 - A1 fl and slip resistance (COF) > 0.40 dry, <0.40 wet. Other Relife shades are Relief Beige, Relief Avorio, Relief Crema, Relief Gris, Relief Honey, Relief Miele, Relief Rover and Relief Wine.

Single Thrust Ball Bearings

KAZI 51160 thrust ball bearing: 300 mm bore (ID), 380 mm outer diameter (OD), 62 mm width.

Mulberry Wood Tortora is a matt 30x120 CM tile from the Mulberry Wood collection, in a soft greyish-brown Tortora colour. Its face carries a wood-grain plank design: long horizontal strips with fine grain and small knot marks, divided by slim lines that give the surface a slatted, panelled look. The Mulberry Wood collection also comes in Brown and Honey.

Combo

Kairusi Chicken Masala and Fish Curry Masala combo pack (50gm X 2) brings two South Indian curry blends, 50gm each, for chicken curry and fish curry (fish kulambu). The Chicken Masala mixes coriander, cumin, black pepper and warm spices for deep, robust chicken curries, gravies and fry dishes. The Fish Curry Masala blends turmeric, fenugreek, mustard and coriander for a tangy, spicy fish curry with a rich, flavourful gravy. Both blends are made with natural ingredients and are free from artificial additives, for authentic taste, rich aroma and even consistency in homemade, restaurant-style curries. Each comes in a 50 gm silver stand-up pouch with an orange-and-white "KAIRUSI" label and a "100% NATURAL" badge. Shelf life is 12 months.

Double Charge Tiles

Grasse Ocean is a marble-look double charge tile, polished and sized 60x60 CM, from the Grasse collection. The face is a near-white ground with faint pale blue-grey flecks spread evenly over it, giving a clean, cool-toned surface. Its polished face has glossiness over 70% (gloss meter 60°). Water absorption is under 0.05% (ISO-10545-3), breaking strength is over 2200 N (ISO-10545-4), and surface abrasion resistance is Class PEI 4 (EN 154) with a Mohs scratch hardness of 5 (EN 101). The tile passes frost resistance (ISO-10545-12) and thermal shock (ISO-10545-9) testing, with stain resistance Class 5 (ISO-10545-14) and reaction to fire Class A1 - A1 fl.

Glossy Series

Grey-toned wall tile design 11134 from the "Glossy Series", 450 x 300 mm, offered as four matching tiles: 11134-L, 11134-HL-1, 11134-D and 11134-HL-2. 11134-L is a pale grey tile with soft marble-style veining, and 11134-D is a mid-grey version of the same veined look. 11134-HL-1 carries white hydrangea-like flower heads on brown stems over a patchwork of grey, plum, blue and mustard blocks. 11134-HL-2 has a bevelled brick-effect pattern in grey, with plum-and-teal insets bearing gold and white scroll motifs. The tiles are 100% water proof, and a matching floor tile is available in 300 x 300 mm. Catalogue code: 11134-L, 11134-HL-1, 11134-D, 11134-HL-2

ONE PIECE HANDMADE ART FULL BASIN

MERMAID 011 is a one-piece handmade art pedestal wash basin in white with blue banded decoration, sized 540 X 455 X 870 MM. It belongs to the "ONE PIECE HANDMADE ART FULL BASIN" series, where the bowl and the standing column form a single piece for a bathroom or washroom that needs a free-standing basin. The round bowl flares out from a narrow waist and sits on a curved, vase-shaped column that widens to a round foot. The outside of the bowl and the middle of the column carry horizontal blue rings with a mottled, glazed texture, while the bowl interior, the waist and the base are plain glossy white. A tap deck rises at the back of the bowl.

Wall Sconce

The H-1042 bronze hurricane sconce, in a bronze polished finish, holds a candle inside a clear glass hurricane shade on a brass wall bracket. Its tall backplate is worked in open, looped scrollwork with ball details, and a curved arm below ends in a round metal cup that seats the flared, tulip-shaped glass chimney. Materials are brass and glass, and the listed size is 4.5x4.5x18. It is made as a custom design. Catalogue code: H-1042

Terminal Caps & Plastic Components

CW-103 waterproof terminal cap for bullet terminals, measuring 33.20mm x 9.00mm. The cap slips over a bullet terminal connection to keep water out of automotive wiring joints. It is a translucent blue moulded sleeve, narrow at the wire end and widening to a flat open mouth. Packed 100 pieces. Part numbers: CW-103 Catalogue code: SI0007005

Special Universal Connectors

Skoda and Mahindra Maximo 6 pole female connector (Type 2) with special wire, a pre-wired universal plug for joining into a vehicle wiring harness. The black housing has a yellow locking clip on top and six terminal cavities set in two rows of three. Coloured special wire leads, 9 inches long, come fitted at the back, ready to splice into the existing wiring. Packed 10 pieces. Catalogue code: SH2100662

Riga Natural Lyon is a Matt 30x120 CM tile from the Riga collection, its face made up of raised square blocks with a wood-grain surface in a soft greyish brown. The blocks sit in three rows in a staggered layout, and the grain on each square runs a different way, vertical, horizontal or diagonal, so the stepped edges between blocks give the face depth and texture. Riga comes in Natural, Honey, Grigio, Grey, Crema, Choco, Brown and Black, each offered as a plain version and as a Lyon version like this one.

Bottles - Essence Bottles

Oblong flat-sided glass essence bottles from the EAGLE range with screw-thread necks, made in a taller bevelled-corner style and a shorter flask style. The taller bottle has a slim rectangular body with chamfered edges and a short threaded neck. The shorter bottle has sloping shoulders, a flat rectangular body and a threaded neck. Both are in transparent, colourless glass with flat bases. Essence bottles of this kind are used to pack food essences, flavours, fragrances and similar liquids.

Glossy Series

Plank-style wall tile in the "Glossy Series", design 11016, measuring 450 x 300 mm, with a textured wood-plank look laid in one long band over two shorter planks. It comes in three designs: cream planks, brown planks, and a highlighter where a brown plank band carries a floral motif in orange, blue and cream above two cream planks. The tiles are sold as 100% water proof, and a matching floor tile is available in 300 x 300 mm. Catalogue code: 11016-L, 11016-HL, 11016-D

Ceramic Subway Tiles

Red Brown Beveled is a glossy ceramic subway tile from the Subway Red Brown collection, listed in a 75x300 CM size. Its long rectangular face is a deep red-brown, framed by a bevelled border that slopes down on all four sides, so each tile reads as a raised panel under the glossy finish. The tile is listed as 75x300 CM, while the collection's available sizes, headed In CM, are given in MM and include 75x300 MM. The same collection also comes in Red Brown Plain. Available sizes: 100x200 MM, 100x300 MM, 108x108 MM, 150x150 MM, 200x200 MM, 75x300 MM, 80x80 MM

Single Row Deep Groove Ball Bearings

KAZI 6900 deep groove ball bearing: 10 mm bore (ID), 22 mm outer diameter (OD), 6 mm width.

Fuses

Slow blow male cartridge fuse, 60 Amps.

Special Universal Connectors

13 pole female wiring connector for the Accent power window switch and the Maruti combination switch. It comes pre-wired with 4mm deluxe wire, 9 inches long, ready to join into the vehicle harness when a damaged switch plug needs replacing. The cream plastic housing has a locking latch on top and two rows of terminal cavities, and the multi-coloured leads (yellow, red, pink, green, blue, purple and more) run to a small black block at the far end. Packing is 10 Pcs. Fits: Hyundai Accent power window switch, Maruti combination switch Catalogue code: SH2101355

Single Thrust Ball Bearings

KAZI 51232 thrust ball bearing: 160 mm bore (ID), 225 mm outer diameter (OD), 51 mm width.

Outdoor Tiles

Kalibar 2.0 Kalibar Sand is a 60x60 cm outdoor tile with a concrete look and a Matt R11 finish. Its face is a warm sandy beige, with soft, cloudy patches of deeper tone over a fine, speckled grain that gives the mottled character of cast concrete. Laid edge to edge, the square tiles form a calm, even sandy surface with fine joint lines. Kalibar Sand comes in the 60x60 cm size, and the Kalibar 2.0 collection also includes Kalibar Nero and Kalibar Light Grey.

Brass Terminals

Light-duty brass battery terminal of the Maruti screw type, catalogue code SBT011428, offering an easy and secure screw-based connection for Maruti vehicles. Two slotted screws run across the top beside a round side socket, and a hex bolt and nut tighten the round post clamp. It is made from CuZn-63/37 brass and serves automotive battery connections. Standard packing is a 12 Pcs. Packet. Catalogue code: SBT011428