Aditya Auto Components
Manufacturer, ExporterBengaluru, Karnataka · since 1995
Business type
Manufacturer, Exporter
Based in
Bengaluru Karnataka
Established
1995
Catalogue
17 products
Their products
17 itemsPrecision Turned Components17 products
Precision Turned Components - open channel sleeve with slotted end
Open channel sleeve with a dark, polished-looking finish, a precision turned part from a range made in diameters from 1 mm to 50 mm. The hollow body has a long cut-away along one side that opens the bore into a channel, and a slot splits the top end into two prongs.
The parts are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Turning runs on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - flanged bush
A precision turned flanged bush with a dark finish, part of a range made in diameters from 1 mm to 50 mm. A wide flat round flange carries a raised cylindrical boss with a central bore.
Parts in the range are produced from ferrous and non-ferrous metals, with lot sizes from 1000 to millions of parts. The machine shop runs CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are carried out in-house; heat and surface treatment are outsourced.
Precision Turned Components - hex-head threaded plug
A precision turned hex-head threaded plug with a dark finish, from a range turned in diameters of 1 mm to 50 mm. Below the hexagonal head is a plain neck, then an external thread, ending in a stepped, chamfered spigot.
The range is produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Production runs on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house, and heat and surface treatment are outsourced.
Precision Turned Components - slotted sleeve with bored end
Slotted precision turned sleeve in bright machined metal, from a range of turned parts made in diameters from 1 mm to 50 mm. A deep cross slot splits one end into two prongs, and the other end carries a centre bore with a turned groove just above it. Fine turned grooves run around the slotted end.
The parts are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Turning runs on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - slotted sleeve
A small precision turned slotted sleeve in bright machined metal, made to order in diameters from 1 mm to 50 mm. The top end has a small central bore and shallow turned grooves, the middle is a smooth plain body, and the lower end has open slots cut through the wall.
These parts come from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Machining uses CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are handled in-house; heat and surface treatment are outsourced.
Precision Turned Components - socket-head threaded bolt with cross hole
Socket-head threaded bolt with a cross hole, a precision turned component in bright metal from a range of 1 mm to 50 mm diameter. A round head with a hexagonal socket sits above a grooved collar; below it, a plain shank drilled with a cross hole leads to an externally threaded end.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - set of 8: hex threaded fitting, stepped bodies, sleeve and rods
Set of eight precision turned parts, mostly bright machined metal with one black-finished fitting, from a range made in diameters from 1 mm to 50 mm. It holds a black hex-headed threaded fitting, a stepped disc with a centre hole, a long grooved stepped body with a cross hole, two short stepped bodies (one cross-holed, one with stamped markings), a large stepped sleeve with a counterbored side hole, and two slim rods with rounded ends.
The parts are made from ferrous and non-ferrous metals in lots from 1000 to millions, on CNC Swiss type sliding headstock, single spindle turret, turn mill, 2 axis and multi spindle machines and cam operated Swiss type automatics. Centerless and cylindrical grinding and honing are in-house; heat and surface treatment are outsourced.
Precision Turned Components - stepped sleeve with cross holes
Stepped sleeve with cross holes, a precision turned component in a metallic finish from a range of 1 mm to 50 mm diameter. The larger body steps down through a shoulder to a smaller, chamfered end drilled with cross holes, while the other end has a turned step and opens into a bore.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - stepped pin with conical tip
Stepped pin with a conical pointed tip, a precision turned metal component from a group made in diameters of 1 mm to 50 mm. A wider cylindrical head tapers to a point at one end and steps down to a slimmer plain shank. The surfaces have a machined metal finish.
Parts in this group are turned from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. They are made on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - stepped pin
Stepped pin in a gold-tone finish, a precision turned component from a range of 1 mm to 50 mm diameter. A plain cylindrical body steps through a shoulder to a smaller spigot with a flat end face, with smooth turned surfaces throughout.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - flanged sleeve with hex socket
Flanged sleeve with a hexagonal socket in its bore, a precision turned component in bright metal from a range of 1 mm to 50 mm diameter. A plain cylindrical body rises from a broad flange whose rim carries a turned groove, and the face below steps down to a collar around the hex socket. The turned surfaces have a smooth, bright finish.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - slotted-head pin with collars
A small precision turned slotted-head pin in bright machined metal, made to order in diameters from 1 mm to 50 mm. One end is a flat-sided head with a deep slot cut across it; below it sit two turned collars separated by a groove, ending in a short spigot with a small cross hole near its tip.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. They are machined on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - stepped headed pin
Stepped headed pin with a dark finish, a precision turned part from a range made in diameters from 1 mm to 50 mm. It has a thin flat round head, a wider shank below it and a smaller pin end, turned as one piece.
The parts are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Turning runs on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - short plug with centre hole and side cut
Short cylindrical plug with a dark finish, a precision turned part from a range made in diameters from 1 mm to 50 mm. Its flat end face has a small centre hole, and a rectangular step is cut along one side of the body.
The parts are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts. Turning runs on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - threaded fitting with hex and beaded spigot
Threaded fitting with a hex body and a beaded spigot, a precision turned component in a dark finish from a range of 1 mm to 50 mm diameter. One end carries an external thread, a hexagon in the middle takes a spanner, and the other end is a plain spigot finishing in a rounded bead.
Parts in this range are produced from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - stepped pin with straight-knurled band
Stepped pin with a straight-knurled band, a precision turned metal component from a group made in diameters of 1 mm to 50 mm. It steps through a slim plain spigot at one end, a wider cylindrical body, then a narrower straight-knurled section finishing in a short plain end. The surfaces have a bright machined metal finish, with crisp steps between the diameters.
Parts in this group are turned from ferrous and non-ferrous metals in lot sizes from 1000 to millions of parts, on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are done in-house; heat and surface treatment are outsourced.
Precision Turned Components - hex-head threaded fitting
A precision turned hex-head threaded fitting with a bright machined finish, from a range turned in diameters of 1 mm to 50 mm. It has a hexagonal head, a smooth plain shank, an external thread toward the far end and a short plain spigot at the tip.
The range is produced from ferrous and non-ferrous metals, in lot sizes from 1000 to millions of parts. Turning is done on CNC Swiss type sliding headstock turning centers, CNC single spindle turret machines, CNC turn mill centers, 2 axis CNC turning centers, multi spindle machines and cam operated Swiss type automatic lathes. Centerless and cylindrical grinding and honing are in-house, while heat and surface treatment are outsourced.
The company
Since 1995, Aditya Auto Components has made precision turned parts on Swiss type CNC automats, and it has supplied turned components to the automotive industry from its founding year. The family-owned company works from two units in the Pete Chennappa Industrial Estate at Kamakshipalya, Bangalore, with approximately 180 production units on a 7,500 sq.m. (80,000 sq.ft.) manufacturing surface and over 40 years of combined expertise in precision turned components. Its workforce is listed as 1001 to 2000 people and also stated as 300 employees. Milestones: ISO 9001 in 1998; a "Best Supplier" award from Seimens in 2002; in 2005, ISO/TS 16949, a "Best Quality Supplier" award from BOSCH, a sister company (APC) in Peenya and a canteen for employees; in 2010, Unit II at Kamakshipalya and quarters for employees; in 2014, in-house tooling facilities and a CMM for quality control. A tool making department designs and makes its own cutting tools, such as multiple level drillers and customized profile tools, on CNC tool grinding machines. Cam sets for the cam operated Swiss type automatic lathes are made on site, and secondary operations are carried out alongside turning. Centerless and cylindrical grinding, honing and tool room work happen in the plant, while heat and surface treatments are outsourced. Inspection runs on a Carl Zeiss 3D CNC CMM Contura G2 (700/700/600 mm, RDS with VAST XXT Probe System), Carl Zeiss Rondcom NEX 200, Carl Zeiss Rondcom 54 form tester and Carl Zeiss Serfcom FLEX surface measurement device, plus a Vickers hardness tester.
| Legal name | Aditya Auto Components |
| GST | 29AAIFA2543C1ZS |
| Established | 1995 |
| Location | Bengaluru, Karnataka, India |
| Category | Precision Turned Components |
| Speciality | Precision turned components made on Swiss type CNC automats, 1 mm to 50 mm diameter |
| Industries served | Automotive, Hydraulic, Aerospace, Electronics, Watch, Medical, Dental |
| Team size | 1001 to 2000 People |
| Addresses | Unit 1#413, 9th Cross, Pete Chennappa Industrial Estate, Kamakshipalya, Bangalore 560079Unit II#116/1, Petechennappa Indl. Estate, Kamakshipalya, Bangalore 560079 |
| Website | www.adityaac.com |
| info@adityaac.com | |
| Certifications | ISO 9001, ISO/TS 16949:2009 |
| Catalogue | 17 products |
| Exports | Yes |
| Production units | Approx. 180 production units |
| Manufacturing surface | 7,500 sq.m. (80,000 sq.ft.) manufacturing surface |
| Awards | Awarded Best Supplier by Seimens, 2002Awarded Best Quality Supplier by BOSCH, 2005 |
| Sister concern | APC (2005) |
| Detail | Over 40 years of combined expertise in manufacturing precision turned components |
| Detail | Precision turned parts diameter ranging from 1 mm to 50 mm |
| Detail | Lot sizes from 1000 to millions of parts |
| Other email | info@adityaac.com |
Quality & certificates
Quality equipment
Carl Zeiss 3D CNC CMM Contura G2
Type: Quality Control Equipment · Size: 700/700/600 mm · Probe: RDS with VAST XXT Probe System
Vickers Hardness Tester
Type: Quality Control Equipment
Carl Zeiss Rondcom NEX 200
Type: Quality Control Equipment
Carl Zeiss Rondcom 54
Type: Quality Control Equipment - Form Tester
Carl Zeiss Serfcom FLEX
Type: Quality Control Equipment - Surface Measurement Device
Factory & machinery
Factory
Machines · 27
Tornos Deco 2000/13
Type: CNC Swiss Type Sliding Headstock Turning Center
Star ECAS 20
Type: CNC Swiss Type Sliding Headstock Turning Center
| Machine | Details |
|---|---|
| Citizen A20 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Citizen L25 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Citizen L20E | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Citizen M20 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Tornos Delta 20/5 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Tornos ST 26 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Guildemeister GLD25 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Hanwha XP16S | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Tsugami Swiss Turn BL 18 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Citizen L32 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Hanwha XD35H | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Hanwha XD20 | Type: CNC Swiss Type Sliding Headstock Turning Center |
| Citizen F12 Twin Turrets | Type: CNC Single Spindle Turret Machine |
| Guildemeister CTX 200 serie 2 | Type: CNC Single Spindle Turret Machine |
| Guildemeister Twin 42 | Type: CNC Single Spindle Turret Machine |
| Mazak Smart | Type: CNC Turn Mill Center |
| Mazak NEXUS 100-II M | Type: CNC Turn Mill Center |
| Unamuno Optima 26 | Type: 2 Axis CNC Turning Center |
| Wasino LJ CNC Lathe | Type: 2 Axis CNC Turning Center |
| Tornos SAS 16.6 | Type: Multi Spindle Machine |
| Tornos MultiDeco 20/8 | Type: Multi Spindle Machine |
| Index MS 25 | Type: Multi Spindle Machine |
| VK 55 CNC Milling Machine | Type: CNC Milling Center |
| Walter Helitronic Tool Grinder | Type: Tool Grinding Machine |
| Cam Operated Swiss type Automatic Lathes | Type: Cam Operated Swiss type Automatic Lathe · Use: Low cost and high volume production; cam sets made in-house |
Our clients
Bosch, Hema Endüstri A.Ş., Stanadyne, Rollon Hydraulics Pvt. Ltd., Honeywell, Spark Minda group, Manudem, Multitech, Usha, TE Connectivity
What's verified
Shared by the seller
In their own words
17Product photographsTheir own catalogue photography.
2Certifications listedISO 9001, ISO/TS 16949:2009Seller-stated
Disclaimer
Information shown here is compiled from the details provided by the seller.