Two Wheeler Protection Guards suppliers in India

MTechnics brake fluid container guard for the Royal Enfield Classic / Reborn 350, a black cap that fits snugly over the front brake fluid reservoir. It keeps dust, dirt and moisture away from the reservoir, helps prevent fluid contamination for more reliable braking, and adds a detailed look to the handlebar. The cover has a textured black surface with slotted fins that wrap around the reservoir. Its material is listed as mild steel and also as 1.6mm aluminum sheet, which offers strength with little extra weight; thickness is listed as 1.6m and as 1.6mm sheet. The finish is listed as powder-coated and also as polished. Two bolts and two spacers come with it for simple installation. Weight 80 gm; dimensions 15 x 8.5 x 7.5. Fits: Royal Enfield Classic / Reborn 350 (Classic 350)

Royal Enfield Meteor 350 bash plate from MTechnics, a black powder-coated engine guard cut from 2 mm mild steel (MS) sheet. It shields the lower engine and underbody from stones, road debris and sudden knocks on city rides and highway tours, while keeping factory ground clearance and airflow. Designed specifically for Meteor 350 fitment, the plate has a front panel with two bolt points and a cut-out logo that runs back into an angled skid tray with slotted side brackets. The powder coat resists corrosion and suits the Meteor's cruiser styling, adding protection for everyday riding and long-distance touring. Product weight is listed as 1.987 gm; dimensions as 48 x 27.5 x 17.5.

Radiator Grill

MTechnics radiator guard (radiator grill) for the Royal Enfield Interceptor 650 / GT 650, cut from 1.6 mm mild steel (MS) sheet with a matte black powder-coated finish. It defends the radiator against stones, mud and road debris while maintaining efficient airflow to the radiator. The front carries a red Union Jack pattern over black mesh, set in a black frame with slotted, finned side edges and a small MTechnics mark. The matte powder coat resists corrosion and blends with the bike's twin-cylinder look. Installation is simple using the stock bolts, and the guard is made for long-distance riders and weekend cruisers alike. Product weight is 410 g; dimensions are 25 x 23.5 x 8. Fits: Royal Enfield Interceptor 650, GT 650, Continental GT

Head Light Grill

Black MTechnics headlight grill for the KTM ADV 250 and ADV 390 (2025), a honeycomb-mesh guard that bolts over the LED headlamp. It protects the headlamp assembly from stones, road debris, mud, insects, scratches and sudden impacts on trails, tours, highways and the daily commute. The grill is laser-cut from 1.6mm MS sheet and powder coated in black for rust, corrosion and weather resistance. An open centre frames the main projector lens, honeycomb cut-outs surround it, two bolts hold it to the headlamp housing and a lower tab carries a cut-out logo. It offers OEM-style fitment, vibration resistance and stable mounting on rough terrain and long rides. Made in India. The grill comes in orange, black and silver; this one is black. Listed dimensions: 29x18x14. Fits: KTM ADV 250 2025, KTM ADV 390 2025, ADV 250/390 2025; also listed under Adventure 390 (2025), KTM 390 Adventure

Crash Guard

Yamaha frame slider crash guard in black for the R15 V3 and MT 15 motorcycles. This heavy duty bike protector bolts to the frame so the slider puck takes the hit if the bike goes down, helping shield the frame and bodywork. The set has two sliders. Each one has a ribbed black stem on an L-shaped bracket with two bolt holes, ending in a round black puck with an emblem cap. Fits: FZ-S, MT 15, R15 V4, R15-V2, R15-V3

Crash Guard

Bajaj Pulsar NS160 crash guard with 4 sliders, made of heavy-quality metal. It helps shield the engine and fairing if the motorcycle falls or tips over. The guard comes as left and right black tubular frames. Each has a triangular upper loop with a cross bar, two round black sliders and a lower arm ending in a bolt eye for mounting.

MTechnics brake fluid cap for the Royal Enfield Himalayan 411, a box-shaped cover that sits over the handlebar brake fluid reservoir. It seals firmly to keep dust, water and dirt out of the reservoir for consistent braking, and adds a custom touch to the cockpit. It is precision-built from 1.2mm mild steel (MS) sheet with a black powder-coated finish for durability, a textured surface, a notched lower edge and a cut-out emblem on the face. It is an easy bolt-on replacement for the stock cap and fixes with two button-head screws. Product weight is 50 gm; dimensions are listed as 15 x 8.5 x 7.5.

Brake fluid cap by MTechnics for the front brake reservoir of the Royal Enfield Meteor 350, made from 1.6 mm mild steel (MS) sheet. It adds strength to the reservoir top, maintains tight sealing to keep the fluid clean, and gives the handlebar a custom look. Every contour and cut is CNC-processed for alignment and easy installation, and it is designed specifically for the Meteor 350 as a direct fit. The supplied M4 25 mm bolts and spacers give a vibration-free fit that holds reservoir sealing in tough riding conditions. The black powder-coated surface protects against wear and road elements. The cover has a stepped shape with slotted, finger-like ridges and a cut-out logo on top. Weight is 80 gm, with dimensions listed as 15 x 8.5 x 7.5. Fits: Royal Enfield Meteor 350

MTechnics bash plate for the KTM Adventure 250 and 390 (2025), an engine and underbody guard (skid plate) for the ADV 250/390. It protects the crankcase, lower frame section, exhaust underbelly and other engine parts from rocks, stones, mud, debris, water splashes, speed breakers and sudden underbody hits on trails, touring routes and rough roads. The plate is made from 2mm MS sheet with a textured black powder-coated finish that resists corrosion, scratches, heat and weather. Its angular shape carries rows of round perforations and slotted vents, and it measures 48x28x14. It bolts on at the stock mounting points, with cutting or drilling unnecessary, using the supplied M6 25MM Button Head Bolts – 4, M6 Washers – 4, Spring Washers – 4 and Spacers – 4. Made in India. Fits: ADV 250/390 2025, Adventure 390 (2025), KTM 390 Adventure

MTechnics sump guard (bash plate) for the Royal Enfield Bullet / New Standard 350, made from 2mm mild steel sheet with 4mm clamps. It shields the engine base, underbody and exhaust area from rocks, debris and road hazards on both highways and trails. The plate wraps under the engine with an upright front panel, an angled lower section and vent slots along the sides that let air through for engine cooling while protecting key components. It mounts as a precision fit on the OE frame points, and the matte black powder coating gives a long-lasting finish. Listed weight 1.987 gm; dimensions 48 x 27.5 x 17.5. Fits: Royal Enfield Bullet / New Standard 350 (Bullet Standard)

Radiator Grill

Radiator guard (radiator grill) by MTechnics for the Royal Enfield Super Meteor 650, CNC-cut from 1.6 mm mild steel (MS) sheet. It shields the radiator fins from stones, gravel and road debris while keeping airflow open, so cooling performance stays steady. The guard has a honeycomb design and is listed in black with a matte powder-coated finish; the guard also carries a red Union Jack-style cross pattern over a fine mesh, with slotted side fins and slotted mounting tabs at the base. It is a direct fit on the stock mounting bolts for quick, drilling-free installation, and its styling is designed to match the Super Meteor's cruiser lines, for touring riders and daily commuters alike. Fits: Royal Enfield Super Meteor 650

Crash Guard

Royal Customs "Crash Guard v1.0" with dual sliders for the Interceptor 650 and Continental GT 650, a heavy-duty engine crash guard. Each side is a black tubular double loop that wraps the engine, with a round black slider at the top and another at the bottom, so every side carries two sliders. Welded tabs with bolt holes mount it to the frame, and a cross rod links the left and right halves. Fits: Interceptor 650, Continental GT 650, GT 650, Interceptor

Radiator Grill

Yellow MTechnics radiator guard for the Royal Enfield Himalayan 450, made from 1.6mm MS sheet to protect the radiator from stone and debris damage. It maintains airflow efficiency through the radiator while giving the bike a sporty edge. The guard has a black frame with diagonal slats over yellow mesh in a cross pattern, vent cut-outs on both sides, "HIMALAYAN" lettering along the lower edge and three mounting tabs, one at the top and two at the bottom. It carries a bright yellow powder-coated finish. Product weight is 900 gm and dimensions are listed as 36.5 x 28 x. Fits: Royal Enfield Himalayan 450

Royal Enfield Hunter 350 bash plate by MTechnics, made from 2mm sheet with 4mm clamps and finished in matte black powder coat. It shields the engine, frame and underbody from stones, debris and impacts on rough roads and off-road trails, while keeping ground clearance. The contoured design follows the bike's frame for a clean, factory-like finish and keeps drainage and maintenance points easy to reach. Strong mount points ensure zero rattle, and the design is direct-fit. A front panel with a cut-out logo and an MTechnics badge runs back into an angled skid tray with slotted side brackets. Strong yet lightweight, it keeps the Hunter adventure-ready. Product weight is listed as 1.806g; dimensions as 48x27.5x17.5.

MTechnics coolant tank cover for the 2025 KTM ADV 250 and ADV 390 (KTM 390 Adventure), a bolt-on guard that protects the coolant system from debris, scratches and accidental damage. It installs directly with the stock bolts, and its lightweight yet durable build suits both on-road and off-road riding while adding a sleek, rugged look. The cover is made from 2mm MS (mild steel) sheet with a black powder-coated finish for corrosion resistance, and weighs 160 gm. The folded cover has a mountain-peak cut-out on its side panel and a slotted mounting tab, and it sits over the coolant reservoir inside the frame. Fits: 2025 ADV 250, ADV 390; also listed under Adventure 390 (2025), KTM 390 Adventure

MTechnics brake fluid cap for the Royal Enfield Himalayan 450, a front disc oil reservoir cover made from 1.2mm MS sheet. It sits over the front brake fluid reservoir on the handlebar, protects the front brake system with a secure fit, keeps dust and moisture out and gives the cockpit a refined look. The folded sheet cover has "HIMALAYAN" lettering and a mountain outline cut through its faces. It carries a powder-coated finish; the colour is listed as silver and black, a black powder-coated finish is named among the features, and the fitted cover has a silver finish. Product weight is 60 gm and dimensions are given as 15 x 8.5 x 7.5. Fits: Royal Enfield Himalayan 450

Crash Guard

MTechnics single-slider crash guard for the Royal Enfield Hunter 350, sold as the "Economy Crash Guard" and made from 1.6mm pipe in matte black. It protects the lower frame and engine, absorbing minor impacts and guarding the bike during sudden drops. The guard is a tubular frame that wraps both sides of the engine, joined by a crossbar at the top, with one round black slider on each side. It bolts to factory-fit mounting points and comes complete with an installation kit. The pipe build is strong and lightweight, and the clean, minimal layout keeps the Hunter's sleek look, suiting city riders who prefer subtle protection, for city and highway rides alike. Weight is given as 3.750g and dimensions as 49x49.5x17.5.

Radiator Grill

MTechnics Radiator Grill V2 Vision for the Yamaha MT-15, a powder-coated radiator guard precision-cut from 1MM mild steel (MS) sheet. It protects the radiator while the upgraded V2 design improves airflow and gives the front profile a bold new look. The Radiator Grill V2 has an OEM-style fit and installs with the stock bolts alone. Weight is given as -150g and measurement as -25x18x8. The grill has a black frame with crossing bars laid over a fine silver mesh, a red emblem at the centre and two slotted mounting tabs along the lower edge, with a mounting bracket at the top corner.

Crash Guard

Metal crash guard with sliders for the Yamaha R15 V3, a heavy-quality build in a black finish. It protects the lower fairing and engine area if the bike falls, with the slider pucks taking the first contact. The guard comes as left and right tubular frames with cross-braces, each with a slider puck at the end and mounting tabs for bolting it to the bike. Fitted, it wraps around the lower body below the fairing. Fits: R15-V3

Head Light Grill

Black X design headlight grill for the Royal Enfield Continental GT and Interceptor GT650. The grill fits over the headlight and guards the lens from stones and knocks. Bold X cross bars run across a diamond lattice inside a round rim, and two side mounting brackets fix it in place with silver bolts. The black finish matches the dark front of the bike. Fits: Royal Enfield Continental GT, GT 650, Interceptor

Crash Guard

Crash guard / engine guard for the Bajaj Pulsar NS200 / AS200 (2014-2023 Non-USD Fork Models), built with double frame sliders and listed in red. The left and right tubular frames bolt to the bike and wrap around the engine sides, and each frame carries two black slider pucks that take the contact in a fall, helping protect the engine and side panels. Mounting tabs with bolt holes sit at the frame ends. Besides the red version, a black version is also offered. Fits: NS 200

Crash Guard

MTechnics crash guard with slider for the Yamaha MT-15, built from 1.6MM high-strength steel pipe with a black powder-coated finish. It shields the engine, body panels and frame in a fall, while the integrated heavy-duty sliders absorb impact and let the bike slide to reduce damage. The guard is a bent tubular frame with a round black slider on each side and flat mounting tabs with bolt holes, made as a direct fit for the MT-15 for stability and a clean, OEM-like look. Fits: Yamaha MT-15

Radiator Grill

Orange MTechnics radiator guard for KTM ADV 250 and 390, a mild steel grill shielding the radiator core from stones, mud, gravel, road debris, water splashes and impacts. Its precision-cut mesh keeps air flowing to cool the engine and prevent overheating on long tours, mountain rides, traffic and trails. Chevron cut-outs sit over a silver mesh backing, with side flanges and corner mounting bolts, and the powder-coated finish resists corrosion, scratches, heat and weather. It gives heavy-duty protection for the engine and side panels, minimises damage in falls or off-road impact, and has a rigid structure with reinforced weld points for stability at high speeds and rough terrain. Specs: Mild Steel (MS); thickness 1.6 MM SHEET,1"×2MM PIPE; powder-coated; colour orange; product weight listed as 32x45x53; Made in India Fits: ADV 250/390 2025, Adventure 390 (2025), KTM 390 Adventure

Crash Guard

MTechnics "Blade X" ("Blade-X") crash guard for the Royal Enfield Hunter 350, built from 1.6MM thick mild steel (MS) pipe with a black powder-coated finish. It absorbs impact during accidental falls and low-speed slides, helping protect the engine casing and essential components. On each side an angled, Y-shaped tube ends in two round black sliders, one high and one low, giving the front a bold, aggressive look that suits the Hunter's street-focused character. The bike-specific design gives precise fitment on the Royal Enfield Hunter while keeping balance, ground clearance and rider comfort, for daily commuting and spirited rides alike. The powder coat gives long-term corrosion protection.