Oil Mill Machinery suppliers in India

Oil Mill Machinery

Oil neutralizer that removes free fatty acids (FFA) from oil, compulsory for cottonseed oil and castor oil treatment, offered as the TPN1 and TPN2 batch models. Cottonseed oil has higher FFA, which the neutralizer removes. Removing the acid as soon as possible stops a bad odour developing over time, which would otherwise call for a complete refinery plant, an expensive and capital intensive project. Oil heating is part of the neutralising process, by steam or by electric heaters, so two types are supplied: one works with a boiler, the other heats electrically and runs boiler-free. Castor oil treatment calls for a boiler. Depending on the oil to be processed, the neutralizer is equipped with a spraying system, open steam system, hot water injection system and agitation system. When ordering, state the capacity needed and whether a boiler is on site. The vessel is a teal vertical tank with a conical bottom on angled legs and a motor drive on the top cover; one variant carries a panel on its front. Models (capacity / net weight / volume in cubic meter): TPN1 500 liters / batch, 300 kg, 1.5 · TPN2 1000 liters / batch, 600 kg, 3.5

Oil Mill Machinery

Cake conveyor for oil mills, carrying hot oil cake away from the expeller's discharge outlet, in screw type and belt type versions. Oil cake is the coarse residue left once oilseeds are crushed for oil. It comes out hot, continuously and in volume, so conveying it away from the milling area prevents big lumps and heaps building up at one place, reduces manpower and tedious work, and speeds up the whole cake handling process. The conveyor is an integral part of the oil extraction unit and transfers the cake in the horizontal direction to the required location; teal enclosed trough units are also set up at an incline, with the motor at the upper end. The screw type is made of steel screws and the belt type of rubber, each run by a motor. The design keeps the cake from mixing with unwanted materials, which matters because the cake goes on as highly nutritious cattle and poultry feed. The conveyors come in different capacities, suit both short and long distances, cut lost time and manual labour, and give fast operation in the oil mill. Built with innovative techniques, steel and a welding process, their sturdy fabrication gives a very long life, with a life span of 20 years.

Tinytech Oil Mills

Tiny palm oil mill for producing crude palm oil locally at the plantation, with a crushing capacity of one tone palm fruits per hour and a steam-driven design that makes the whole mill power independent. It is designed to help small plantation owners, especially in West African countries, process their own fruit, and one mill has been exported to Liberia. Its machines are completely different from a regular tiny oil mill. The mill comprises a sterilizer, palm fruits stripper, digester kettle, palm oil expeller, nut fibre separator, oil clarifier tank, water tube boiler and three steam engines: one for the expeller, one for the stripper and one driving an alternator that produces electricity for small motors and lighting. Palm bunches are steam-sterilized at atmospheric pressure for about 20 minutes in a cylindrical vessel that then tilts from vertical to horizontal, dropping them onto perforated trays to drain. The very sturdy stripper uses revolving beater arms on a 63mm Sqare shaft to throw the bunches until the fruits fall through square screen bars onto a bottom conveyor; a 10 HP steam engine drives it. Some experts say palm fruits separate only partially unless sterilized first, leaving a mill running at a loss. The belt-driven digester kettle sits on the expeller and cooks the fruits evenly in a jacketed vessel with revolving arms and live steam. The expeller has a chamber of 230mm dia x 750mm long, presses oil from the fruits while leaving the palm nuts whole, and has a cone gap that adjusts while running; it crushes 1000 kg of palm fruits per hour or more. A 20 hp steam engine drives the expeller and kettle, while the boiler is sized to give 40 hp for the oil expeller. Oil drains into a tank with a steam-jacketed bottom that keeps it hot. The nut fibre separator is an inclined revolving cylinder of wire woven screen, 1.5 mt. long and 40 cm in dia, turned slowly by an electric motor. The water tube boiler supplies at least 1.5 tones of steam per hour, also covering 10 hp for the stripper and 20 hp for electricity generation. The clarifier lets oil rise above water and drains it through a screen into a smaller inner vessel. The mills are built in batches of 20 under a group purchase scheme, and every buyer who joins receives a discount. Building 20 mills takes about 5 to 6 months; once 20 buyers have paid, the machinery is to be made and dispatched in 4 months, with all mills dispatched within 4 to 6 weeks in the order payments arrive. A local coordinator collects orders, guides payment and port delivery and serves buyers free of cost, paid by a 5% commission from the maker. Progress is shared through photographs and videos in a WhatsApp group, and plantation owners fully own their machinery. The green-painted machines run from flywheels and drive belts.

Oil Mill Machinery

Oil filter press for oil mills, retaining solid particles to deliver extremely pure oil, in six plate sizes. Each plate carries two filter cloths, either polyester + PP or cotton + PP, with PP always on the outside so dirt cleans off it easily. Three cloth types, polyester, cotton and polypropylene, are supplied to match the seasoning effect, and fabric and thickness are selected by type of oil, moisture level, viscosity and oil temperature, since filtration quality is key for oil mill owners. Cloths fit by opening the centre round nut with a square hole, placing the cloths and tightening the nuts at the centre; a DVD supplied with the oil mill plant shows the method. The press is cleaned every 8 ~ 10 hours, and cleaning takes only 20~30 minutes. The press is made of high graded steel on a fabricated steel structure, a design the maker pioneered, and stands on a supplied base table that gives it height, so brick pillars are unnecessary and installation time and energy are saved. Plates are accurately machined for leak proof joints that withstand operating pressure, and tilt for easy cloth cleaning. The screw thread separates the plates with 50% effort compared to other filter presses. A filter cleaning tool, specially designed with a wooden handle, is part of the standard supply, the oil collection channel is SS 304, and a specially designed filter pump is offered, which some buyers insist on. An aesthetic colour coating finishes the frame in teal, with a row of chrome taps along the plates and a hand wheel screw at one end. Recently 450 filter presses went to a state government in India. Filtration capacity may vary with the type of oil, its viscosity and the % sediments (solid particles) it contains. Sizes (capacity / weight / HP of feed pump / filtration area Sq Mt.): 12" x 12" - 14 plates, 50 liters / hour, 240 kg, 1.5, 1.26 · 16" x 16" - 16 plates, 100 liters / hour, 475 kg, 1.5, 2.56 · 18" x 18" - 18 Plates, 150 liters / hour, 675 kg, 1.5, 3.64 · 20" x 20" - 20 plates, 200 liters / hour, 890 kg, 1.5, 5 · 24" x 24" - 24 Plates, 350 liters / hour, 1400 kg, 2, 8.64 · 30" x 30" - 30 Plates, 700 liters / hour, 1900 kg., 3, 16.87

Tinytech Oil Mills

Automatic oil mill plant for crushing edible or non-edible oilseeds, offered in seven sizes from 3 TONS to 24 TONS crushing capacity per 24 hours. Bucket elevators and screw conveyors carry seeds and cake from one machine to the next. They take over the lifting and carrying that tires workers once a mill grows beyond a MINI OIL MILL PLANT of 1 decorticator and 1 expeller, which two persons can handle. Edible and non-edible oil each need a completely separate plant; only the boiler can be shared. Plants of 12 tons or more can crush 2 kinds of oilseeds at the same time, and customers prefer the 6 Tons and 12 Tons plants most. Automation applies to plants above 3 tons capacity. Where manpower is easily available at low rates, an owner may choose to run the plant manually. Capital requirement is as per proforma invoice plus working capital. For full extraction the seeds are crushed twice. The first crushing uses more steam heating and gives about 80% of the oil, leaving a cake about 10 mm thick with 12%-15% residual oil. The second expeller presses harder through its cake discharge cone, giving a cake about 3 mm thick with around 7% residue and the remaining 20% of the oil. Bucket elevators lift seeds and cake vertically to the expellers and suit medium to large mills. Each has a bottom intake section, a middle tank section that sets the height, and a top discharge section with an extended drive shaft; belt and chain types are offered. Screw conveyors move oilseeds and oilcake horizontally in bulk, using a shaft with a broad helical blade turning in a semicircular trough. They come in 8" and 10" sizes, and speed is changed by swapping pulleys. The maker builds and fits its own gear boxes, so after a long run only the small gears need replacing instead of the entire gear box. The teal-painted line includes expellers topped with cooking kettles and belt-driven flywheels, electric motors, inclined screw conveyors with drive heads, and a tall bucket elevator tower with a feed hopper. Plant sizes (crushing capacity per 24 hours · space · power · manpower · water): 3 TONS · 300 sq ft · 12KW / 16 HP · 2 · 300 liters; 6 TONS · 800 sq ft · 24KW / 32 HP · 2 · 600 liters; 9 TONS · 1100 sq ft · 36KW / 48 HP · 3 · 900 liters; 12 TONS · 1600 sq ft · 48KW / 64 HP · 3 · 1200 liters; 15 TONS · 2500 sq ft · 60KW / 80 HP · 4 · 1500 liters; 18 TONS · 3000 sq ft · 72KW / 96 HP · 4 · 1800 liters; 24 TONS · 4000 sq ft · 84KW / 112 HP · 6 · 2400 liters

Tinytech Oil Mills

Edible oil extraction plant for groundnut, sesame, sunflower, soya bean, mustard, copra and other oilseeds, built around oil expellers of size 22" x 4" that each crush 2 to 3 tons per 24 hours. A typical plant has four sections, seed preparatory, oil expelling, oil filtering and oil packing, each with its own importance, which together make up the whole extraction plant. The plants are efficient, reliable, cost-effective and most sturdy. Oil is obtained by pressing, with the expellers playing the key role, and seeds can be cold pressed or hot pressed. The plant suits both edible and non-edible oil, each in a completely separate plant; only the boiler can be used in common. Adding expellers raises plant capacity in step. The line has teal expellers, inclined screw conveyors and a filter press, and a row of chrome taps pours oil into a trough. Crushed using boiler (% oil content in seeds, oil output from 100 Kg of oilseed, tons per 24 hours by one 22" x 4" expeller): GROUNDNUT 46 to 48 %, 42 Kg, 3; SESAME 50 to 56 %, 50 Kg, 3; SUNFLOWER SEEDS 32 to 40 %, 32 Kg, 3; SOYA BEAN 18 to 22 %, 14 Kg, 3 Crushed boiler-free: MUSTARD 50 to 56 %, 35 Kg, 2.5; COPRA 62 to 68 %, 62 Kg, 2.5; COTTONSEED 18 to 22 %, 13 Kg, 2; PALM KERNEL 38 to 45 %, 36 Kg, 3; RAPESEED 38 to 45 %, 37 Kg, 3; CUMIN SEEDS 32 to 33 %, 25 Kg, 3; SAFFLOWER SEEDS 35 to 36 %, 28 Kg, 3; KARDI SEEDS 35 to 37 %, 30 Kg, 3; MAIZE GERMS 40 to 45 %, 35 Kg, 3; CANOLA 40 to 42 %, 34 Kg, 2.2

Food Processing Machinery

Oil ghani machine (rotary cold press) that crushes sesame for oil at very low temperature, with 20 kg / hour capacity and a 2 HP, 3 phase electric motor. The whole ghani is a compact machine on a 600mm x 600mm base frame. The 2 HP motor drives a vertical mortar revolving at 12 RPM through a reduction gear box, and pressure is raised through a heavy spring and screw. The pestle and mortar are robust enough to need practically zero maintenance. The machine is painted teal, with a wide round pan at the top, the pestle arm and screw handle above it, a rounded guard over the drive and small wheels on the base frame. Net weight is 300 kg; shipping dimensions are 30" x 36" x 48" (750mm x 900mm x 1200mm) and shipping volume is 1.5 Cubic meter. The ghani has extracted sesame oil in India for 4000 years: bullock-driven, made of stone and granite as early as 2000 BC and later of wood, with half million ghanis running up to 1955 before oil expeller technology took over. Ghanis still running today are made of iron and steel and driven by a 2 HP motor. The same machine makes SANI, a sweet of sesame, its oil and jaggery. 6 kg of sesame seeds are crushed for 8 to 10 minutes, about 700 ml of water (up to 8% of the sesame weight) is sprinkled in, and after 3 to 4 minutes oil starts flowing from the top of the cone. Then 6 kg of jaggery is added and mixed for 5 to 7 minutes, giving 15 kg of SANI in a total cycle of 20 to 22 minutes, or 300 kg to 350 kg in 8 hours. SANI is ready uncooked yet tastes like a cooked product. It is promoted as a nutritious food for children, youth and old people, for removing malnutrition, for improving eyesight, and for refugee camps, where one ghani can make SANI for 2 to 3 thousand people in 8 hours; one person eats 100 to 150 gms.

Tinytech Oil Mills

Edible oil refinery plant that turns crude oil into RBD edible oil, offered in 3, 5, 10, 15 and 30 TONS refining capacity per 24 hours. Oil from old or rotten seeds runs high in acid and develops a bad odour, and refining removes these impurities. Refining runs in three basic stages. In the neutralizer, caustic soda removes Free Fatty Acids (FFA) while thermic fluid coils heat the oil to about 60 °C and a stirrer mixes it; the soap stock settles and is drawn into a soap pan. The bleacher removes colour with carbon black and bleaching earth at about 110 °C under vacuum, and a filter press separates the earth. The deodourizer heats the oil above 110 °C, injects live steam through bottom nozzles and raises it to 220 °C under high vacuum to remove smell. A cooler and a second filter press then give completely refined, transparent, colourless oil. A thermic fluid boiler, vacuum pump, barometric condenser, catchalls and steam generator connect to the vessels through pipelines. For palm oil, a fractionation stage chills the refined oil in a crystallizing vessel with chilling pipe coils, and a filter press separates liquid palm olein (palm olene) from palm sterene cake. Its chilling plant includes a shell and tube chiller, compressor, motor, pump, condenser and control panel box. The 5 tonnes per day refinery runs 4 batches of 1250 kg each. Two neutralizers, one bleacher and one deodourizer hang from the first floor of a 14ft. x 14ft. (4.25mtr. x 4.25mtr) steel structure, 9ft. above ground, carried on 8 columns of double channel with a staircase and railings on all sides; two filter presses share that floor. Two soap pans with steam pipes and the raw and bleached oil tanks sit below. The cooler, thermic fluid boiler, two steam generators, vacuum pump, water pumps, oil pumps and refined oil tank stand around the structure, for a total of about 30ft. x 30ft. (9mtr. x 9mtr.); the space requirement for the 5 TONS size is listed as 1500 square feet. A 40ft. tower beside the deodourizer holds the barometric condenser. Pipelines are colour coded: oil yellow, vacuum blue, steam black, water white and thermic fluid red, with valves at all appropriate places. The neutralizer is open on top with a conical bottom and a thermic fluid coil. The bleacher, deodourizer and cooler have dished ends on both sides and double pipe coils: thermic fluid and cooling water in the bleacher, thermic fluid in both deodourizer coils, and cooling water in both cooler coils. Steam enters the deodourizer through stainless nozzles. Every vessel has a temperature gauge, and the deodourizer, bleacher and cooler have vacuum gauges. Green conical-bottom tanks, one marked "NEUTRALISER", stand beside clad vessels on a railed steel platform, with yellow conical-bottom tanks and a motor-driven vacuum pump at ground level. Output and utilities (oil refining capacity per 24 hours · min. daily output RBD edible oil in liter · power · water in liters): 3 TONS · 2800 · 28KW · 2000; 5 TONS · 4000 · 28KW · 4000; 10 TONS · 9000 · 35KW · 8000; 15 TONS · 14000 · 50KW · 12000; 30 TONS · 29000 · 75KW · 20000 Space and manpower (space in square feet · area L x W x H in meters · manpower per shift): 3 TONS · 1500 · 14 x 12 x 6 · 2; 5 TONS · 1500 · 14 x 12 x 6 · 2; 10 TONS · 2000 · 18 x 16 x 7 · 3; 15 TONS · 2500 · 18 x 16 x 10 · 3; 30 TONS · 3000 · 18 x 16 x 12 · 4

Tinytech Oil Mills

Mini oil mill plant for producing edible and non-edible oils from oilseeds and nuts, with a crushing capacity of 3 TONS (125 - 140 kg / hour) per 24 hours. It needs 300 Square Feet of space, 12KW / 16HP of power, 2 workers and 300 Liters of water. The plant pairs a teal oil expeller, with a flywheel and a cylindrical top chamber, with an electric control panel and a filter press. The chamber opens on hinges and one person can open it; the plant installs foundation-free, involves zero weight lifting, rules out adulteration and is very easy to maintain. Low power and low investment keep risk low, and it can also run on diesel generators where grid power is scarce or expensive. Medium capacity plants are offered too. The plant is easy to install, run and operate, and a few lady customers in African countries run one. It suits custom milling for villagers, farmers, seed traders and anyone with oilseeds, in villages, small towns or cities, as an evergreen income business, with a payback period of about 90 ~ 120 days. The maker, a pioneer of mini oil mills, has promoted small-scale mills for 35 years and exported to 90 countries; in India 10000 small oil mills have started. Oilseeds (oil content in seeds / oil from 100 Kg / crushing capacity in tons per 24 hours): GROUNDNUT 46 to 48 % / 42 Kg / 3; MUSTARD 50 to 56 % / 35 Kg / 2.5; RAPESEED 38 to 45 % / 37 Kg / 3; SESAME 50 to 56 % / 50 Kg / 3; CASTOR SEEDS 40 to 48 % / 36 Kg / 3; SOYA BEAN 18 to 22 % / 14 Kg / 3; SUNFLOWER SEEDS 32 to 40 % / 32 Kg / 3; COPRA 62 to 68 % / 62 Kg / 2.5; COTTONSEED 18 to 22 % / 13 Kg / 2; PALM KERNEL 38 to 45 % / 36 Kg / 3; NEEM SEEDS 46 to 48 % / 4 Kg / 3; JATROPHA 32 to 35 % / 27 Kg / 3; CUMIN SEEDS 32 to 33 % / 25 Kg / 3; SAFFLOWER SEEDS 35 to 36 % / 28 Kg / 3; KARDI SEEDS 35 to 37 % / 30 Kg / 3; MAIZEGERMS 40 to 45 % / 35 Kg / 3; CANOLA 40 to 42 % / 34 Kg / 2.2

Oil Mill Machinery

Cake elevator, a bucket elevator for oil mills that lifts seeds and oil cake to feed equipment set at height, supplied mainly as a chain driven unit, with belt driven elevators as the second type. As part of an automatic oil mill setup, the elevator handles material during operation and reduces considerable manpower, and it is especially versatile where installation space is limited. In a groundnut line, the first elevator feeds pods from ground level to a decorticator at 6 feet height; a second elevator then lifts the seeds from the decorticator into a large overhead hopper that stores seed for crushing in the first expeller. These are the two main uses. Elevators are an optional addition: buyers with budget room gain considerable labour savings, while budget plants in countries with lower labour costs may skip them. The elevator is a tall, enclosed teal casing with a motor and drive wheel at the head and a feed hopper at the base.

Oil Mill Machinery

Oil expeller with cooking kettle, also known as a mechanical screw press or oil press, for crushing edible and non-edible oilseeds into fresh oil and oil cake. Its 22" X 4" chamber crushes about 150 kg of oilseed, rated at 125 - 140 kg / hour or 3 Tons / 24 Hours, driven by a 10 HP or 12.5 HP electric motor. The expeller is the central part of an oil extraction plant. Oil falls into a small rectangular tank kept below it, and oil cake comes out from the other side. Seeds with more than 25% oil are generally crushed twice for maximum recovery: first with the cake about 8~10 mm thick, then about 3~4 mm. Cake thickness can be changed while the expeller is running. The cooking kettle is mounted on the expeller and driven by it. It heats and cooks the seed with outer steam from the boiler or by electricity, and a little steam or water raises the moisture to the optimum level so crushing runs easily and smoothly. The kettle holds 40 kg of seed, controls the flow of seed into the expeller, and passes the seed over a magnet that catches iron parts before they can damage the expeller. Round and long kettle designs suit specific oilseeds, in four types: Round Feeding Kettle (single bottom, for work where steam heating is unneeded), Round Cooking Kettle (double bottom steam jacket, where steam heating is necessary), Long Cooking Kettle (double bottom steam jacket, where steam heating is compulsory) and Round Electric Cooking Kettle (double bottom oil jacket, for indirect heating with a little added water, ideal for sunflower and run boiler-free). The chamber cage opens on hinges simply by tilting the chamber halves, sparing operators the lifting of heavy clamping bars and chamber halves. The oil pump is an integral part of the expeller. A ready foundation frame removes the need for a ground foundation, so installation is easy, the plant can start within 24 hours, and the machine can be shifted from place to place. Six taper roller bearings make the expeller sturdy and durable. The feedbox mouth is made bigger for crushing cotton seeds effectively, and the main pulley shaft diameter is 62 mm, the highest in the industry. Construction includes a steel fabricated chamber, cast iron bodies and base, a single reduction gear box with spur gears for low maintenance, a case hardened worm assembly, and graded steel of appropriate hardness for a maintenance-free plant. The compact build makes air freight economical for landlocked countries. The machine is finished in teal, with a belt-driven flywheel and pulley, hand wheels at the side and the kettle on top; a long kettle version carries a raised hopper and feed trough. Mini oil mills of this make are running in more than 90 countries, backed by 40 years of experience in the oil mill industry. Expellers are guaranteed against manufacturing defect, built for particular seeds or multiple seeds to the client's requirement, and supplied in the number a plant's capacity needs, with after-sales guidance on request. Benefits include low capital investment, high returns in a short span, high yield at low operating cost, longer life of wearable parts, precision manufacturing and assembly, and oil and cake quality similar to bigger expellers. The plants promote decentralised units that create livelihoods. Specifications: Net weight 500 kg · Dimensions (L x W x H) 64" x 22" x 33" · Volume 1.60 Cubic meter · Foundation Frame Provided · Cake Thickness Adjustable Oilseeds crushed using boiler (% oil content / oil from 100 kg seed / tons per 24 hours): Groundnut 46 to 48 %, 42 Kg, 3 · Sesame 50 to 56 %, 50 Kg, 3 · Sunflower seeds 32 to 40 %, 32 Kg, 3 · Soya bean 18 to 22 %, 14 Kg, 3 · Castor seed (nonedible) 40 to 48 %, 36 Kg, 3 Oilseeds crushed boiler-free (% oil content / oil from 100 kg seed / tons per 24 hours): Mustard 50 to 56 %, 35 Kg, 2.5 · Copra 62 to 68 %, 62 Kg, 2.5 · Cottonseed 18 to 22 %, 13 Kg, 2 · Palm kernel 38 to 45 %, 36 Kg, 3 · Rapeseed 38 to 45 %, 37 Kg, 3 · Cumin seeds 32 to 33 %, 25 Kg, 3 · Safflower seeds 35 to 36 %, 28 Kg, 3 · Kardi seeds 35 to 37 %, 30 Kg, 3 · Maizegerms 40 to 45 %, 35 Kg, 3 · Canola 40 to 42 %, 34 Kg, 2.2 · Jatropha (nonedible) 32 to 35 %, 27 Kg, 3 · Neem seed (nonedible) 46 to 48 %, 4 Kg, 3

Edible Oil Mill Plants

Groundnut oil mill plant for extracting edible oil from groundnut (peanut), offered as a 3.5 TPD mini oil mill plant and a 6 ~ 7 TPD automatic plant. Output is rated at up to 45 % oil from groundnut / peanut. The 3.5 TPD mini plant crushes 125 ~ 140 kg per hour, or 3.5 tons in 24 hours. It pairs an oil expeller, topped by a cylindrical kettle and driven by an electric motor and large flywheel, with a plate-type filter press on a tray stand. The 6 ~ 7 TPD automatic groundnut oil mill plant crushes 7 tons in 24 hours and produces 2000 ~ 2400 liters of oil per 24 hours. Two motor-driven expellers are fed by inclined conveyors. The machines are finished in teal.

Edible Oil Mill Plants

Mustard oil mill plant for pressing edible oil from mustard seed, offered as a 2 TPD plant and a 4 TPD automatic plant. Output is rated at up to 38 % oil from "Mustard / Rapseed". The 2 TPD mustard oil mill plant crushes 80 ~ 90 kg per hour, or 2 tons in 24 hours. It combines an oil expeller, topped by a cylindrical kettle and driven by an electric motor and large flywheel, with a plate-type filter press on a tray stand. The 4 TPD automatic mustard oil mill plant crushes 4 tons in 24 hours and produces 1400 liters of oil in 24 hours. Two motor-driven expellers are fed by inclined conveyors. The machines are finished in teal.

Edible Oil Mill Plants

Coconut oil mill plant for pressing edible oil from dry copra, offered as a 2.5 TPD plant and a 5 TPD automatic plant. Output is rated at up to 62 % oil from dry copra. The 2.5 TPD coconut oil mill plant crushes 100 kg per hour, or 2.5 tons in 24 hours. It combines an oil expeller, topped by a cylindrical kettle and driven by an electric motor and large flywheel, with a plate-type filter press on a tray stand. The 5 TPD automatic coconut oil mill plant crushes 5 tons in 24 hours and produces 3000 liters of oil in 24 hours. Two motor-driven expellers are fed by inclined conveyors. The machines are finished in teal.