Drilling Machines suppliers in India

Drilling Machine

CAPACITY 63 - 1500 Drilling [C.I.] 70 Drilling [M.S.] 60 Boring [M.S.] 80 Tapping [C.I.] M - 30 Tapping [M.S.] M - 25 Drilling Head Spindle Nose M.T.-5 Spindle Nose Outside Diameter 75 Ram Diameter 100 Travel of Spindle 300 Number of Spindle 10 Speed Min./Mix. 30 - 1500 Number of Power Feeds 2 Range of Power Feeds 0.10 + 0.20 Power Drilling Head 5 HP Two Speed Motor 1440 + 2800 Lighting of Arm 2 HP 1440 Working Range Column Diameter 345 Dist. From Spindle to base min./mix. 400 x 1400 Dist. From Column to centre min./mix. 385 x 1450 Drilling Head Travers 1050 Drilling Radius 1600 Traverse of Arm 840 Base Plate Height of Base Plate 200 Working Surface 930 x 1400 Number/Centre Dis of T Sloth Length 3 x 300 Width of Cast Side 22 mm Oerall Dimensions [ L x W x H ] 2500 x 1200 x 2500 Weight Approximate 4000

Drilling Machine

Drilling Cum Milling machine, an electric milling machine that combines drilling and milling on a single round column. The drill head carries a spoked feed lever and a handwheel, and the compound cross table has long T-slots and is moved by handwheels at both ends and at the front, so a workpiece can be positioned for milling cuts as well as drilled. The column stands on a rectangular base with T-slots, and the whole machine has a painted green finish.

Drilling Machine

The ALL GEAR RADIAL DRILL MACHINE is an all-gear-drive radial drill with an MT 4 spindle taper, built for drilling, tapping, boring and reaming in heavy fabrication workshops, steel plants and engineering industries. It takes a maximum drilling diameter of 40 mm to 60 mm depending on model, with variable working speeds across 8 to 12 spindle speeds. A heavy-duty cast iron frame and hardened gears give smooth, low-noise operation with high precision and consistent, repeatable accuracy, suited to continuous, heavy-duty production on large workpieces. A built-in coolant pump and centralized lubrication reduce thermal and frictional wear for longer-lasting operation in continuous use. The machine is electric and semi-automatic with manual/electrical control, rated 2-3 HP (2.2 kW approx.) on 220V/380V/415V, 50Hz, for an ambient industrial temperature range. It is painted/coated in blue and white, with a box-type work table on a T-slotted base plate, a push-button control panel, a handwheel and feed handles on the drilling head. The model is supplied as per requirement. Each machine is packed for safe transit, with FOB ports available for international shipments. Minimum order is 1 Piece. Specifications: Column Diameter 200 - 300 mm · Spindle Travel 200 - 300 mm · Arm Length 1000 - 1600 mm · Table Size 600 x 450 mm (approx.) · Base Plate Size 1200 x 800 mm (approx.) · Dimension (L*W*H) Approx. 2000x1000x2200 mm · Weight Approx. 2000 kg

Drilling Machine

CAPACITY 40 MM 38 MM 32 MM 25 MM HD 25 MM MD 25 MM LD 20 MM Drilling [C.I.] 45 38 32 25 25 25 20 Drilling [M.S.] 40 35 32 25 25 25 20 Tapping Cap. 25 20 15 20 15 15 10 Drill Head Taper Spindle M.T.-4 M.T.-4 M.T.-4 M.T.-3 M.T.-3 M.T.-3 M.T.-2 Quil Movement 240 240 250 240 175 155 120 Speed No. Range of Spindle 8 8 8 8 8 8 8 Speed min./max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 150 to 2651 80 to 3500 Feeds No. Range of Feed Manual Manual Manual Manual Manual Manual Manual Working Range Distance from Spindle Center to Cloumn Face 355 300 280 250 250 230 200 Max. Distance from Spindle to base Plate 1030 1000 1000 1000 970 1050 900 Max. Distance from Spindle to work tabel 550 530 530 530 530 680 650 Work Table Table Diameter 485 x 485 422 x 422 422 x 422 370 round 325 x 325 310 x 310 250 x 250 Base Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800 x 525 720 x 470 660 x 410 660 x 410 580 x 365 370 x 550 480 x 310 No. of 'T' Slots 2 2 2 2 2 2 2 Power Drilling Motor 2 HP 1.5 HP 1 HP 1 HP 1 HP 1 HP 0.5 HP 960 RPM 1400 RPM 1400 RPM 1400 RPM 1400 RPM 1440 RPM 1400 RPM Weight [Kgs.] Weight in K.G. 550 375 300 275 225 185 110 V-BELT B-71 B-57 B-56 B-52 B-52 B-49 A-44

Drilling Machine

20MM Bench Drill Machine with a heavy duty cast iron base and pillar, made for drilling holes up to 20 mm in steel and also in aluminium, brass, plastic, wood and other engineering materials. It serves engineering workshops, machine shops, automotive workshops, tool rooms, fabrication units, maintenance units, educational institutes and small-scale industries, for production as well as repair work. The belt-driven spindle has an MT2 taper and 125 mm travel, giving 5 or more speeds across 450-2500 RPM by pulley setting, with run-out accuracy of 0.02 mm. The chuck takes 1-13 mm or 1-20 mm. The 250 mm x 250 mm table adjusts in height and angle by rack and pinion and sits 750 mm from the floor, with 600 mm maximum from spindle to base, a 63 mm column and a 300 mm x 500 mm base. Feed is by manual lever, lubrication is manual and a coolant system is optional. The cast iron frame keeps vibration low for steady, accurate drilling with low maintenance, and every machine is inspected before dispatch. Power is 0.5 HP - 1 HP (0.37-0.75 kW) on 220-240V (Single Phase), 50-60 Hz, with a noise level of 70 dB and an operating range of 5C to 45C. The paint-coated machine is green and orange, measures approx. 700 x 350 x 1200 mm and weighs 50 - 70 kg (approx.). Production capacity is 30-50 machines per month.

Drilling Machine

Radial Drill Machine in 25 MM and 40MM capacity models: a manual cast iron radial drill for drilling, boring and tapping cast iron (C.I.) and mild steel (M.S.), with drilling up to 40MM and boring up to 50MM on the larger model. The machine is green, supplied new, and manual and non-computerized. A trained technician sets it up and runs drilling, tapping and boring jobs. The radial arm and drilling head reach across large, heavy or intricate components on hard surfaces. That suits industrial workshops, manufacturing units, engineering firms, fabrication shops, tooling sections and heavy construction work. A round column carries the arm, and the drilling head has a handwheel and feed lever. A box table and the base plate both have T-slots. Each unit is packed for safe transit and dispatched across India, with export to the Middle East, Africa and Asia. Orders start at 1 piece, delivery time is 1 week, and both advance purchase and bulk supply are offered. Samples are available for evaluation, free within a certain price range. Advance and bulk orders get priority dispatch. Capacity (25 MM / 40MM): drilling [C.I.] 32 / 40; drilling [M.S.] 25 / 35; boring [M.S.] 40 / 50; tapping [C.I.] 20 / 20; tapping [M.S.] 15 / 18 Drilling head (25 MM / 40MM): spindle nose M.T.-3 / M.T.-4; spindle nose outside diameter 40 / 54; ram diameter 70 / 78; travel of spindle 190 / 220; spindle 8 step pulley / 8 step pulley; speed min./max. 130 to 2600 / 70 to 2000; feeds manual / manual Power (25 MM / 40MM): drilling head 1 HP / 1.5 HP; two speed motor 1440 / 1440; lighting of arm 0.5 HP / 0.5 HP, 1440 / 1440 Working range (25 MM / 40MM): column diameter 130 / 165; distance from spindle to base min./max. 150 x 850 / 300 x 910; distance from column to centre min./max. 380 x 650 / 350 x 900; drilling head traverse 300 / 450; drilling radius 715 / 980; traverse of arm 700 / 720 Base plate (25 MM / 40MM): height 125 / 150; working surface 500 x 710 / 590 x 800; T-slot number/centre distance 3 x 100 / 3 x 150; width of cast side 15 mm / 15 mm Overall dimensions L x W x H (25 MM / 40MM): 1100x800x1600 / 1300x900x1800; approximate weight 500 / 900 V-belt: A - 22, A - 26, B - 38, B - 46 Payment terms: Cash Against Delivery (CAD), Cash Advance (CA), Cash in Advance (CID), Cheque

Drilling Machine

CAPACITY 60-1600 60-2000 80-2500 Drilling [C.I.] 60 60 80 Drilling [M.S.] 70 70 90 Boring [M.S.] 80 80 150 Tapping [C.I.] 25 25 50 Tapping [M.S.] 30 30 55 Drilling Head Spindle Nose MT - 5 MT - 5 M.T.-6 Spindle Nose Outside Diameter 80 80 110 Spindle Slive Diameter 110 110 120 Travel of Spindle 300 300 350 Number of Spindle Speed Min./Mix. 10 10 12 30 - 1500 30 - 1500 20-900 Number of Power Feeds 9 9 6 Range of Power Feeds 0.08 + 1.15 0.08 + 1.15 0.05 - 0.90 Power Drilling Head 5 HP 5 HP 10 HP Motor 1440 + 2800 1440 + 2800 1440 + 2800 Elevating Motor for Arm 3 HP, 1440 RPM 3 HP, 1440 RPM 3 HP, 1440 RPM Hydraulic Clamping Motor 1 HP, 1440 RPM 1 HP, 1440 RPM 1 HP, 1440 RPM Working Range Column Diameter 350 400 500 Dist. From Spindle to base min./mix. 400 x 1400 690 x 1590 450 x 1400 Dist. From Column to centre min./mix. 385 x 1600 385 x 2100 400 x 2250 Drilling Head Travers 1215 1715 1900 Drilling Radius Min. / Max. 570 - 1775 600-2200 650-2500 Traverse of Arm 840 950 900 Base Plate Height of Base Plate 250 250 250 Working Surface 930 x 1400 1050 x 2000 1200 x 2200 Number/Centre Dis of T Sloth Length 3 4 4-200 Width of Cast Side 22 mm 28 mm 28 mm Oerall Dimensions [ L x W x H ] 2500 x 1200 x 2750 3280 x 1520 x 2900 2800 x 1200 x 3000 Weight Approximate 4000 kg. 6000 kg. 10500 kg.

Drilling Machine

CAPACITY 50 MM Drilling [C.I.] 60 Drilling [M.S.] 50 Boring [M.S.] 80 Tapping [C.I.] 30 Tapping [M.S.] 25 Drilling Head Spindle Nose M.T.-5 Spindle Nose Outside Diameter 80 Ram Diameter 85 Travel of Spindle 240 Number of Spindle 10 Speed Min./Mix. 30 - 1500 Number of Power Feeds 6 Range of Power Feeds 0.08 + 0.06 Power Drilling Head 5 HP Two Speed Motor 1440 + 2800 Lighting of Arm 2 HP 1440 Working Range Column Diameter 250 Dist. From Spindle to base min./mix. 300 x 1200 Dist. From Column to centre min./mix. 450 x 1150 Horizontal Movement of Drilling Wheel 680 Drilling Radius 1225 Traverse of Arm 900 Base Plate Height of Base Plate 200 Working Surface 700 x 1100 Number/Centre Dis of T Sloth Length 3 x 200 Width of Cast Side 20 mm Oerall Dimensions [ L x W x H ] 2500 x 1200 x 2500 Weight Approximate 3000 kg.

Drilling Machine

Piller drill machine (pillar drill) weighing 215 kg, offered in capacities up to 40mm with multiple speed ranges for drilling, tapping and reaming cast iron and mild steel. It is built of robust all-metal construction in a radiant green finish, with a stainless steel worktable that takes components of many sizes and keeps them aligned. The head carries a round dial and a three-arm feed lever, the T-slot table has a crank handle on its bracket, and the base is slotted. Manual operation makes drilling, tapping and reaming easy to control, and the machine delivers reliable performance for mass production in metal fabrication, automotive repair and industrial workshops. It is built to essential industrial standards for quality and performance, and suits distributors, exporters, suppliers, traders and wholesalers across India. Each unit is securely packed and shipped from major domestic markets and FOB ports in India, with delivery in 1 week. Samples are available, free within a certain price range. Payment is by cash in advance or cheque, and main export markets are the Middle East, Africa and Asia. Every capacity has 8 spindle speeds, manual feed and 2 'T' slots. 40 MM: drilling C.I. 45, M.S. 40; tapping 25; taper spindle M.T.-4; quill movement 240; speed 45 to 1000; spindle centre to column face 355; spindle to base plate 1030; spindle to work table 550; table 485 x 485; column 135; base plate 800 x 525; motor 2 HP, 960 RPM; weight 550 kg; V-belt B-71 38 MM: drilling C.I. 38, M.S. 35; tapping 20; taper spindle M.T.-4; quill movement 240; speed 70 to 2000; spindle centre to column face 300; spindle to base plate 1000; spindle to work table 530; table 422 x 422; column 108; base plate 720 x 470; motor 1.5 HP, 1400 RPM; weight 375 kg; V-belt B-57 32 MM: drilling C.I. 32, M.S. 32; tapping 15; taper spindle M.T.-4; quill movement 250; speed 70 to 2000; spindle centre to column face 280; spindle to base plate 1000; spindle to work table 530; table 422 x 422; column 101; base plate 660 x 410; motor 1 HP, 1400 RPM; weight 300 kg; V-belt B-56 25 MM HD: drilling C.I. 25, M.S. 25; tapping 20; taper spindle M.T.-3; quill movement 240; speed 70 to 2000; spindle centre to column face 250; spindle to base plate 1000; spindle to work table 530; table 370 round; column 92; base plate 660 x 410; motor 1 HP, 1400 RPM; weight 275 kg; V-belt B-52 25 MM MD: drilling C.I. 25, M.S. 25; tapping 15; taper spindle M.T.-3; quill movement 175; speed 130 to 2600; spindle centre to column face 250; spindle to base plate 970; spindle to work table 530; table 325 x 325; column 92; base plate 580 x 365; motor 1 HP, 1400 RPM; weight 225 kg; V-belt B-52 25 MM LD: drilling C.I. 25, M.S. 25; tapping 15; taper spindle M.T.-3; quill movement 155; speed 150 to 2651; spindle centre to column face 230; spindle to base plate 1050; spindle to work table 680; table 310 x 310; column 92; base plate 370 x 550; motor 1 HP, 1440 RPM; weight 185 kg; V-belt B-49 20 MM: drilling C.I. 20, M.S. 20; tapping 10; taper spindle M.T.-2; quill movement 120; speed 80 to 3500; spindle centre to column face 200; spindle to base plate 900; spindle to work table 650; table 250 x 250; column 74; base plate 480 x 310; motor 0.5 HP, 1400 RPM; weight 110 kg; V-belt A-44

Drilling Machine

CAPACITY 38-800 Drilling [C.I.] 40 Drilling [M.S.] 38 Boring [M.S.] 80 Tapping [C.I.] 20 Tapping [M.S.] 20 Drilling Head Spindle Nose M.T.-4 Spindle Nose Outside Diameter 55 Ram Diameter 80 Travel of Spindle 180 Number of Spindle 8 Speed Min./Mix. 50 - 1750 Number of Power Feeds 2 Range of Power Feeds 0.10 - 200 Power Drilling Head 1.75 HP Two Speed Motor 1400 + 2800 Lighting of Arm 1 HP 1440 Working Range Column Diameter 165 Dist. From Spindle to base min./mix. 1000 x 160 Dist. From Column to centre min./mix. 850 x 360 Horizontal Movement of Drilling Wheel 380 Drilling Radius 875 Base Plate Height of Base Plate 150 Working Surface 610 x 680 Number/Centre Dis of T Sloth Length 3 / 130 + 750 Width of Cast Side 18 Oerall Dimensions [ L x W x H ] 1100x800x16001300x900x1800 Weight Approximate 475 Kg.

Drilling Machine

25MM Pillar Drill Machine is a robust and reliable drilling machine designed for accurate and efficient drilling operations in various industrial and workshop applications. Manufactured using quality materials and precision-engineered components, this machine offers excellent performance, smooth operation and long service life. The machine is suitable for drilling holes up to 25MM capacity in materials such as mild steel, cast iron, aluminium and other suitable materials. Its sturdy pillar-type construction provides good stability during operation and helps maintain drilling accuracy. The user-friendly design makes it easy to operate and maintain. Key Features: 25MM maximum drilling capacity Heavy-duty and sturdy construction Smooth and accurate drilling operation Strong pillar-type body Easy-to-operate design Low maintenance requirement Durable and long-lasting performance Suitable for industrial and workshop applications Ideal for fabrication, engineering and repair work Applications: 25MM Pillar Drill Machine is widely used in engineering workshops, fabrication units, maintenance departments, machine shops, automobile workshops and small-scale industries for drilling and related operations.

Drilling Machine

Heavy Duty 25mm Pillar Drill Machine, a floor-standing pillar drill that drills up to 25 mm in mild steel and also works cast iron, aluminium and other metals. It serves engineering workshops, fabrication industries, automobile workshops, machine shops, maintenance departments and manufacturing units for industrial drilling and metal fabrication. A cast iron body and heavy-duty frame keep it steady and resist vibration for accurate, consistent holes, with low maintenance and long service life. The V-belt drive gives 4 or 5 speed steps, multispeed up to 1400 RPM, and the MT-3 spindle has 125 mm vertical travel with a standard 1 mm to 16 mm chuck. The 320 mm diameter (approx.) circular tilting table with slots allows angled drilling and secure clamping. It has 210 mm from spindle to column, 950 mm from spindle to base, a 74 mm column and a 485 mm x 320 mm slotted base plate. Manual lever feed gives easy depth adjustment and 0.05mm accuracy. Power is 1 HP to 2 HP (1.5 kW approx.) on 220-240V or 415V, 3 Phase, 50 Hz. Overload protection and an emergency stop switch are fitted; lubrication is by greased bearings and manual lubrication, and external coolant is optional. This semi-automatic, conventional mechanical, manual machine is paint coated green with orange highlights, runs at moderate noise within 5-45C, measures approx. 600 mm x 400 mm x 1500 mm and weighs approx. 180-220 kg. Catalogue code: 25mm-PD-HD

Drilling Machine

Special Purpose Drilling machine with two vertical drilling heads on a shared bed, for drilling holes from 10 to 25 mm. Speed runs 70 to 2000, the feed is listed as Mechainc Hydraulic, and power is 2 HP 1440 RPM. The machine is finished in blue and white, with a handwheel on each drilling head and a central electrical control panel carrying a display and push buttons. Fixtures sit along the bed between the heads, and the whole unit stands on an enclosed cabinet base. Orders start at 1 unit, with delivery in 1 week, and samples are available, free within a certain price range. It is exported to the Middle East, Africa and Asia. Payment terms: Cash in Advance (CID), Cheque, Cash Advance (CA)

Drilling Machine

CAPACITY 40 MM 38 MM 32 MM 25 MM HD 25 MM MD 25 MM LD 20 MM Drilling [C.I.] 45 38 32 25 25 25 20 Drilling [M.S.] 40 35 32 25 25 25 20 Tapping Cap. 25 20 15 20 15 15 10 Drill Head Taper Spindle M.T.-4 M.T.-4 M.T.-4 M.T.-3 M.T.-3 M.T.-3 M.T.-2 Quil Movement 240 240 250 240 175 155 120 Speed No. Range of Spindle 8 8 8 8 8 8 8 Speed min./max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 150 to 2651 80 to 3500 Feeds No. Range of Feed Manual Manual Manual Manual Manual Manual Manual Working Range Distance from Spindle Center to Cloumn Face 355 300 280 250 250 230 200 Max. Distance from Spindle to base Plate 1030 1000 1000 1000 970 1050 900 Max. Distance from Spindle to work tabel 550 530 530 530 530 680 650 Work Table Table Diameter 485 x 485 422 x 422 422 x 422 370 round 325 x 325 310 x 310 250 x 250 Base Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800 x 525 720 x 470 660 x 410 660 x 410 580 x 365 370 x 550 480 x 310 No. of 'T' Slots 2 2 2 2 2 2 2 Power Drilling Motor 2 HP 1.5 HP 1 HP 1 HP 1 HP 1 HP 0.5 HP 960 RPM 1400 RPM 1400 RPM 1400 RPM 1400 RPM 1440 RPM 1400 RPM Weight [Kgs.] Weight in K.G. 550 375 300 275 225 185 110 V-BELT B-71 B-57 B-56 B-52 B-52 B-49 A-44

Drilling Machine

25 MM LD pillar drilling machine, the lightest 25 MM build in its series at 185 kg, drilling up to 25 in cast iron (C.I.) and 25 in mild steel (M.S.) with a tapping capacity of 15. It has an M.T.-3 taper spindle with 155 quill movement, 8 spindle speeds from 150 to 2651, manual feed and a 1 HP, 1440 RPM drilling motor. Its working range gives 230 from spindle centre to column face, 1050 from spindle to base plate and 680 from spindle to work table, the deepest table clearance in the series. The work table measures 310 x 310 with 2 T-slots, on a column of 92 and a 370 x 550 base plate. The machine has a green body with a belt guard on top, a three-spoke feed handle, a round column, a square slotted work table raised by a crank handle and a slotted base plate. The same series covers 40 MM, 38 MM, 32 MM, 25 MM HD, 25 MM MD and 20 MM models. Minimum order is 1 unit, delivery takes 1 week, samples are available, and payment is by cash in advance (CID), cheque or cash advance (CA). Main export markets are the Middle East, Asia and Africa. Specifications: V-belt B-49.

Drilling Machine

Belt-drive Bench Drill Machine rated for 19 mm drilling in steel, for drilling, reaming and tapping in metal workshops, fabrication units and educational institutes, and for drilling holes in metal, wood and plastic on the shop floor. It is mounted on a workbench and built on a rigid cast iron frame with a heavy duty cast iron base. Moving the belt across the pulleys gives 4 to 8 spindle speeds (depending on model), and chuck sizes are 13 mm / 16 mm / 20 mm (based on model). The 230 mm x 230 mm worktable has 75 mm horizontal movement and 250 mm vertical travel. Spindle travel is 100 mm, with 410 mm maximum from spindle to table, 700 mm maximum from spindle to base and 190 mm from spindle centre to column; the column is 60 mm and the base 350 mm x 250 mm. Accuracy is high precision (0.05 mm). Motor power is listed as 0.75 KW / 1 HP and as 0.5 HP to 1 HP, on 220V / 380V or 220V/415V, single or three phase supply, 50 Hz. Control is by on/off switch and manual lever, with overload protection and an emergency stop. Lubrication is by grease packs and manual lubrication, and cooling is manual. Noise is <75 dB, and the operating temperature is 0 to 45C (also listed as 5C to 45C). The new, conventional machine is powder coated green with red base edges and the slotted table and base are edged in red. It is listed as semi-automatic and as manual operating type. Size is 600 x 390 x 900 mm (also listed as approx. 700mm x 300mm x 900mm) and weight 60 kg (also listed as approx. 50 - 80 kg). Production capacity is 50 machines/month (also listed as 30-50 pieces per month). Catalogue code: 20MM/Drill

Drilling Machine

20 MM bench drilling machine, model "20MM/Drill", for drilling holes up to 20 mm in metal, wood and plastic on shop floors, in workshops and in industrial plants. It runs on a 1 HP (0.75 KW) electric motor with belt drive, and holds tools in a keyed chuck on an MT-2 Morse taper spindle with 120 mm spindle travel. It is built for precision and reliability: a heavy-duty cast iron base and frame, a green powder-coated finish that resists corrosion, smooth operation and a low-maintenance design lubricated by grease packs. Safety comes from an electrical cutout switch and an emergency stop, with an on/off switch for control. It is a conventional, manually operated machine with manual cooling, mounts on a bench or the floor for indoor industrial use, and carries an IE2 energy efficiency class. The machine has a green body with a belt guard on top, a three-spoke feed handle, a round column, a slotted work table raised by a crank handle and a slotted base plate. The series capacity table gives different figures for the 20 MM model: drilling 20 in cast iron (C.I.) and 20 in mild steel (M.S.), tapping capacity 10, M.T.-2 taper spindle, quill movement 120, 8 spindle speeds from 80 to 3500, manual feed, spindle centre to column face 200, spindle to base plate 900, spindle to work table 650, table 250 x 250, column 74, base plate 480 x 310, 2 T-slots, a 0.5 HP 1400 RPM drilling motor, weight 110 kg and V-belt A-44. The same series covers 40 MM, 38 MM, 32 MM, 25 MM HD, 25 MM MD and 25 MM LD models. Production runs at 50 machines a month, with a minimum order of 1 unit and delivery in 1 week. Each unit is packed to withstand shocks and vibration in transit, FOB port options are available across India, and distributors and wholesalers are supplied. Samples are available, and payment is by cash in advance (CID), cheque or cash advance (CA). Main export markets are the Middle East, Asia and Africa. Specifications: 3 speeds (380 / 720 / 1200 RPM); 220V / 380V, single / three phase, 50 Hz, 3.5A input current; table 270 x 270 mm; base 375 x 250 mm; column diameter 72 mm; spindle to table 380 mm; spindle to base 630 mm; V-belt section A-37; height with guard 900 mm; dimensions 600 x 390 x 900 mm; weight 60 kg; operating temperature 0 to 45C.

Drilling Machine

13MM pillar drilling machine with an MT2 spindle taper and a 0.5 HP to 1 HP motor, for drilling, reaming and tapping metal and wood in workshops, tool rooms and training institutes. A rigid cast iron frame and pillar give stable, vibration-free drilling with smooth spindle movement, and high spindle alignment reduces drill drift for precise, consistent holes. The main spindle is hardened and ground alloy steel for minimal run-out. It drills mild steel, aluminum, brass, copper, plastic, wood and other materials. The work table adjusts in height by rack and pinion, the drive is a V-belt pulley drive and control is by manual lever. Manual lubrication points reduce wear on key parts, and the green machine carries a printed IMPORTANT DAILY OIL AT INDICATED POINT reminder. It mounts on a bench or on the floor. Its energy-efficient motor, low noise below 80 dB, easy installation, low maintenance, long service life and ergonomic design that reduces operator fatigue make it an economical choice for daily workshop use, and each machine is made to strict quality standards. It serves engineering industries, automobile workshops, fabrication shops, repair centres, maintenance departments, educational institutions and small manufacturing units. Specs: drilling capacity 13 MM, with maximum drilling diameter listed as 13 mm to 20 mm depending on model; power 0.5 HP to 1 HP, 0.37-0.75 kW, depending on model; 220-240V AC, 50 Hz; spindle travel 100 mm; table 200 mm x 200 mm (approx.); base 350 mm x 500 mm; column diameter 50 mm; spindle to column 165-200 mm; dimensions approx. 600 x 300 x 1100 mm; weight approx. 60-80 kg; operating temperature 5C - 45C; machined table and base surfaces; powder coated paint; production capacity continuous, depends on operator. Supplied with: drill chuck, chuck key. Options: external coolant, integrated safety guard.

Tapping Machine

Hand operated threading machine for cutting threads manually, worked by a side crank. It has a green painted cast body on a flat base, a crank handle with a black grip on one side, and a three-arm star handle with black knobs at the work head, with copper-coloured panels on the body. Minimum order is 1 unit, with delivery in 1 week; samples are available, and it is supplied to the Middle East, Africa and Asia.

Drilling Machine

Experience an unprecedented deal on the classic VERTICAL BENCH DRILL MACHINE! Now available at a reduced price, this first-rate drill is engineered for versatility and dependability in every workshop. Try now to unleash a working speed up to 2800 RPM, variable or stepped by pulley, with a sturdy column and adjustable table height. Its sturdy cast iron frame and precision engineering ensure accurate drilling in metal, wood, or plastics. A reliable semi-automatic machine, offering continuous production capacity for distributors, suppliers, and seasoned traders. Upgrade your tooling today! Applications and Versatile Usage The VERTICAL BENCH DRILL MACHINE is ideally suited for a multitude of applications and surfaces, including metal, wood, and plastic. Used as a core drilling, tapping, and reaming solution, this machine thrives in industrial workshops and manufacturing plants. Its robust construction and adjustable features make it perfect for use in engineering plants, metal fabrication facilities, educational technical labs, and repair workshops, where precision and continuous operation are paramount. Packaging Details, Certifications, and Supply Ability Each machine is packaged with secure, damage-resistant materials to minimize expenditure on potential repairs. List price is competitive, reflecting high valuation and reliability. Certifications meet standard workshop safety and quality benchmarks. Our supply ability ensures prompt delivery to meet market demand, whether you are a wholesaler, exporter, or local distributor. With every shipment, customers receive comprehensive documentation, ensuring complete transparency and after-sales support. FAQ's of VERTICAL BENCH DRILL MACHINE: Q: How does the variable speed feature benefit the operator? A: The variable or step pulley speed adjustment enables users to select the optimal RPM for different materials, enhancing drilling precision and extending tool life. Q: What is the typical usage of the VERTICAL BENCH DRILL MACHINE? A: This machine is primarily used for drilling, tapping, and reaming applications in metal, wood, or plastic, making it essential for workshops, manufacturing plants, and educational technical labs. Q: When should the optional safety features be considered? A: Optional safety features like the belt guard and emergency stop are recommended when the machine is operated in a high-traffic workshop or where extra operator protection is required. Q: Where can the VERTICAL BENCH DRILL MACHINE be installed? A: Due to its compact bench design and standard dimensions, it can be installed in small to medium-sized workshops, plant floors, educational institutions, and maintenance facilities. Q: What process is involved in the maintenance of this drill machine? A: Routine maintenance involves manual lubrication with grease or oil, periodic inspection of the belt drive, and cleaning of the paint-coated surfaces to ensure smooth operation and longevity. Q: How does the machine ensure user safety during operation? A: User safety is supported by an optional belt guard and emergency stop, while the heavy-duty cast iron frame provides stability and reduces vibrations during use.

Drilling Machine

25MM Radial Drill Machine 25MM Radial Drill Machine is a robust and versatile industrial drilling machine designed for accurate and efficient drilling operations on Mild Steel, Cast Iron and other metal components. It is suitable for engineering workshops, fabrication units, automobile industries, maintenance departments and general industrial applications. The machine is engineered with a rigid construction and precision spindle arrangement to provide smooth, stable and vibration-free drilling performance. Its radial arm and adjustable drilling head allow operators to position the spindle conveniently according to the workpiece, making it suitable for drilling holes at different locations without frequent workpiece repositioning. With a 25MM maximum drilling capacity , this radial drilling machine offers excellent flexibility for medium-duty industrial applications. Depending on the machine configuration, specifications may include MT-3/MT-4 spindle taper, multiple spindle speeds and approximately 185200MM spindle travel. Key Features: 25MM drilling capacity Heavy-duty and rigid machine construction Adjustable radial arm and drilling head Smooth and accurate drilling operation Precision spindle for better hole accuracy Multiple spindle speed options Suitable for Mild Steel and Cast Iron Easy operation and maintenance Durable components for long service life Ideal for industrial and workshop applications Applications: Suitable for fabrication work, engineering workshops, automobile industries, machine shops, maintenance work, manufacturing units and general metalworking applications . The 25MM Radial Drill Machine provides a practical combination of strength, accuracy, flexibility and productivity , making it an ideal choice for industries requiring reliable radial drilling performance. Versatile and High-Precision Drilling Engineered for reliability, the 25mm Radial Drill Machine delivers smooth and precise results across various metals, including steel, cast iron, and aluminum. Eight spindle speeds and a manually adjustable feed allow operators to tackle a range of industrial drilling, boring, and tapping applications with ease. Its robust construction guarantees long-term durability and stable performance in demanding environments. Effortless Operation and Safety Assured Designed with operator convenience in mind, this machine features a fully adjustable arm, 360-degree rotational capability, and intuitive manual controls. Safety is prioritized through the inclusion of a spindle guard and built-in overload protection. Its low noise level and efficient lubrication system ensure comfortable and safe use during prolonged operations. Customizable to Fit Your Workflow Recognizing diverse industrial needs, this radial drill machine offers custom configuration options on request, including tailored electrical and mechanical features. Easy installation with a floor-mounted base and standard ISI-marked switch-gear means it integrates smoothly into your existing facility. Rigorous testing and quality paint coating ensure readiness and reliability from the moment it arrives. FAQ's of RADIAL DRILL MACHINE 25MM: Q: How does the 25mm Radial Drill Machine ensure accurate drilling in industrial settings? A: The machine is engineered with a high-precision spindle, robust horizontal frame, and a stable heavy-duty base. With eight selectable spindle speeds and smooth variable speed control from 65 to 2000 RPM, it achieves optimal performance for different materials and operation requirements, assuring consistent drilling accuracy. Q: What materials and applications is this radial drill machine suitable for? A: This drill is optimized for metals such as mild steel (up to 25 mm), cast iron (up to 32 mm), and aluminum. It is ideal for drilling, boring, and tapping operations typically required in fabrication shops, manufacturing units, and industrial maintenance settings. Q: When should I perform maintenance on the machine and what does it involve? A: Routine maintenance is minimal and primarily involves manual lubrication of moving parts and checking for any loose fittings or wear on the V-belt. It is recommended to carry out these checks before each shift or as per the usage frequency to ensure optimal performance and longevity. Q: Where can the Radial Drill Machine be installed? A: This machine is floor-mounted, making it suitable for workshops, industrial production facilities, and fabrication environments. Its compact dimensions and sturdy base support flexible placement wherever electrical connections are available. Q: What is the process for installing and starting the machine? A: The radial drill machine is supplied fully assembled and tested. For installation, simply position it on a firm, level floor, connect it to a standard 3-phase 220V or 415V supply, and verify that the switch-gear and safety features are functional before starting operations. Q: What are the key benefits of using this radial drill machine? A: Key benefits include substantial productivity due to variable speeds, high-precision operation, robust construction for stability, ease of use with manual controls, integrated safety features, and versatile capability for customizations as per unique industrial needs.

Drilling Machine

38 MM pillar drilling machine for holes up to 38 in cast iron (C.I.) and 35 in mild steel (M.S.), with a tapping capacity of 20. It takes tools in an M.T.-4 taper spindle with 240 quill movement and runs 8 spindle speeds from 70 to 2000 with manual feed, driven by a 1.5 HP, 1400 RPM drilling motor. As one of the larger machines in its series, it reaches 300 from spindle centre to column face, 1000 from spindle to base plate and 530 from spindle to work table. The 422 x 422 work table has 2 T-slots, and the machine stands on a column of 108 and a 720 x 470 base plate, weighing 375 kg. The machine has a green body with a belt guard on top, a three-spoke feed handle, a round column, a square slotted work table raised by a crank handle and a slotted base plate. The same series covers 40 MM, 32 MM, 25 MM HD, 25 MM MD, 25 MM LD and 20 MM models. Minimum order is 1 unit, delivery takes 1 week, samples are available, and payment is by cash in advance (CID), cheque or cash advance (CA). Main export markets are Africa, the Middle East and Asia. Specifications: V-belt B-57.

Tapping Machine

Tapping and threading machine, electrically powered and semi-automatic, for cutting internal and external threads. It sits on an open green steel stand with four legs; an electric motor at the rear drives the spindle by belt, and a long hand lever with a black grip feeds the work along a tray-shaped bed. The finish is green paint, with an orange lever bracket. It is sold from 1 unit with delivery in 1 week; samples are available, and it is supplied to the Middle East, Africa and Asia.

Drilling Machine

CAPACITY 40MM Drilling [C.I.] 45 Drilling [M.S.] 40 Boring [M.S.] 80 Tapping [C.I.] 20 Tapping [M.S.] 16 Drilling Head Spindle Nose M.T.-4 Spindle Nose Outside Diameter 60 Ram Diameter 80 Travel of Spindle 250 Number of Spindle 12 Speed Min./Mix. 55 - 1500 Number of Power Feeds 3 Range of Power Feeds 0.10 + 0.3 Power Drilling Head 2 HP Two Speed Motor 1440 + 2800 Lighting of Arm 1 HP 1440 Working Range Column Diameter 220 Dist. From Spindle to base min./mix. 400 x 1100 Dist. From Column to centre min./mix. 250 x 1080 Horizontal Movement of Drilling Wheel 800 Drilling Radius 1110 Traverse of Arm 600 Base Plate Height of Base Plate 180 Working Surface 800 x 1150 Number of T Sloth Length 3 Width of Cast Side 18 mm Oerall Dimensions [ L x W x H ] 1640 x 810 x 2160 Weight Approximate 1600 kg.