Drawer Pull suppliers in India

Drawer Pull

The "Ithai" Brass Drawer Pull pairs solid brass with an Antique Brushed Nickel finish, giving a silver-grey cup pull for drawers and cabinets. An oval front panel carries a raised scrolling vine pattern over a darker textured ground, and each curved end has a screw hole, the two set 87mm = 3.4 inch apart. Overall dimensions are 102mm x 42mm x 23mm, with 102mm = 4 inch long, 42mm = 1.6 inch wide and 23mm height. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty. Catalogue code: SH-ITH-DRWP-008-BR

Drawer Pull

A half-moon cup pull with a ribbed shell-style bowl, the "Eluzai" black antique iron drawer pull is cast iron in a black powder coated finish. It measures 94mm (3.7 inch) x 47mm (1.8 inch) x 21mm overall. The textured rim fixes through three screw holes, two at the lower ends set 83mm (3.2 inch) apart and one at the top, 33mm (1.2 inch) above them. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India. Catalogue code: SH-ELU-DRWP-007-IR

Drawer Pull

The "Sarah" Black Antique Iron Drawer Pull is a cast iron cup pull for cabinet drawers, with a hooded bowl decorated in raised leaf scrolls and a small round bead at the centre of its lower edge. Rounded ears at each end carry a screw hole, and the bowl gives the fingers a grip to open the drawer. It is listed at 47mm x 123mm x 26mm overall; the size marks read 123mm = 3.7 inch long, 40mm tall and 30mm Height, with the screw holes 107mm = 4.2 inch apart. The finish is black powder coated. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty. Catalogue code: SH-SAR-DRWP-002-IR

Drawer Pull

The "Elam" Black Antique Iron Cabinet Pull And Drawer Handle is an iron pull for cabinets and drawers, built as a flat plate with a D-shaped round-bar handle held in a raised channel across its middle. Four screw holes, two above the channel and two below, fix it to the door or drawer front, and the bar gives the hand a grip to pull it open. The finish is black powder coated. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty. Catalogue code: SH-ELA-DRWP-005-IR

Drawer Pull

The "Festus" Brass Drawer Pull is an ornate solid brass pull in an Antique Copper finish for drawers and cabinets. Its raised front carries an embossed scroll and leaf pattern under a peaked crest, copper-toned with darker recesses, and each end has a square screw mount. Overall dimensions are 118mm x 45mm x 77mm, with 118mm = 4.6 inch long and 45mm = 1.7 inch wide. The 77mm figure is marked both as the height and as the 77mm = 3 inch spacing between the two screw holes. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty. Catalogue code: SH-FES-DRWP-007-BR

Drawer Pull

The "Ezer" black antique iron cabinet pull and drawer handle is a wrought iron bail pull for cabinet doors and drawers, finished in black powder coat. A curved bail handle hangs from two hinged knuckles on a long, flat back plate with rounded ends, which fixes through a screw hole at each end and one at the centre. The plate is 206mm = 8.1 inch long and 54.2mm across, with 180mm = 7.1 inch between the end screw holes, 116mm = 4.7 inch across the handle and an 18.2mm height. It comes as one piece with matching screws, is made in India and carries a 2 year warranty. Catalogue code: SH-EZE-DRWP-021-IR

Drawer Pull

The "Abez" Brass Drawer Pull is a solid brass cup-style pull for drawers and cabinet fronts. Its half-moon cup carries a fluted shell pattern in a bright brass tone, framed by a brushed rim, and it mounts through three screw holes: one at the top and one at each end. The finish is Polished Lacquered, offered as Polish Lacquered. Overall dimensions are 102mm x 52mm x 22mm, that is 102mm = 4 Inch long, 52mm width and 22mm height. It is supplied as one piece with matching screws, made in India and covered by a 5 year warranty. Catalogue code: SH-ABE-DRWP-001-BR

Drawer Pull

The "Dibri" Black Antique Iron Drawer Pull is a cast iron cup pull for cabinet drawers, with a fluted, ribbed hood rising to a small bead at the top and a smooth arched lower edge. Rounded ears at each end carry a screw hole, and the hood gives the fingers a grip to open the drawer. It measures 115mm x 40mm x 29mm overall (115mm = 4.5 inch long), with the screw holes 113mm = 4.4 inch apart, and has a black powder-coated finish. It is supplied as one piece with matching screws, made in India, packed in Uttar Pradesh, India, and carries a 2 year warranty. Catalogue code: SH-DIB-DRWP-004-IR

Drawer Pull

The "Abez" Black Antique Iron Drawer Pull is a half-moon cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. The cup is fluted like a shell, its ribs ending in a scalloped lower edge, inside a flat textured flange. It measures 102mm x 52mm x 22mm overall and fixes with three screws through holes in raised lugs, one at the top and one at each lower corner. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India. Catalogue code: SH-ABE-DRWP-020-IR

Drawer Pull

The "Gog" Black Antique Iron Drawer Pull is a half-moon cast iron cup pull for drawers, cabinets and cupboards, finished in black powder coat. A scrolled border and a ribbed inner rim frame the deep cup, which carries a raised floral relief, and a screw hole sits in each rounded end. It measures 93mm x 46mm x 25mm overall: 93mm (3.6 inch) long, 46mm (1.8 inch) tall and 25mm in height. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-GOG-DRWP-013-IR

Drawer Pull

The "Iconium" Brass Drawer Pull is a solid brass cup pull in an Antique Copper finish for drawers and cabinets. The rectangular cup has a beaded border around a dense embossed leaf pattern, copper-toned with darker recesses, and a screw hole at each end, the two set 82mm = 3.2 inch apart. Overall dimensions are 91mm x 29mm x 21mm, with 91mm = 3.5 inch long. It is supplied as one piece with matching screws, made in India, packed in U P, India, and covered by a 2 year warranty. Catalogue code: SH-ICO-DRWP-010-IR (label reads SH-ICO-DRWP-010-BR)

Drawer Pull

The "Harim" Black Antique Iron Drawer Pull is a cup-style pull for drawers and cabinets. It is listed as made of solid brass in an Antique Copper finish, and its product label reads "Harim" Brass Drawer Pull. The finish is copper-toned with darker recesses. A rectangular front panel carries an embossed arch-and-scroll pattern, and each rounded end has a screw hole, the two set 88mm = 3.4 inch apart. Overall dimensions are listed as 106mm x25mm x 18mm, with 106mm = 4.1 inch long. It is supplied as one piece with matching screws, made in India and covered by a 2 year warranty. Catalogue code: SH-HAR-DRWP-009-IR (label reads SH-HAR-DRWP-009-BR)

Drawer Pull

The "Jemuel" Black Antique Iron Drawer Pull is a half-round cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. Its whole surface has a dimpled, hammered texture, with a rolled lip along the lower edge of the cup. It measures 99mm x 37mm x 19mm overall (3.8 inch wide, 1.4 inch tall). Two screw holes at the lower ends sit 82mm = 3.2 inch apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India. Catalogue code: SH-JEM-DRWP-019-IR

Drawer Pull

The "Galal" Black Antique Iron Drawer Pull is a plain cast iron cup pull for drawers, cabinets and cupboards in black powder-coated finish. Its half-oval cup has a hammered texture framed by a smooth raised rim, with a screw hole in each end tab. Overall dimensions are listed as 28mm x 87mm x 17mm: 87mm (3.4 inch) long, 28mm tall and 17mm in height, with 73mm (2.8 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-GAL-DRWP-012-IR

Drawer Pull

The "Festus" black antique iron drawer pull is a decorative bin-style pull in cast iron with a black powder coated finish, shaped with pointed end tabs and a raised, peaked centre covered in embossed scroll work. It measures 118mm (4.6 inch) x 45mm (1.7 inch) x 77mm overall, with the 77mm given as height. Two screw holes sit in square bosses on the end tabs, set 77mm (3 inch) apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India. Catalogue code: SH-FES-DRWP-010-IR

Drawer Pull

The "Ithai" Black Antique Iron Drawer Pull is an oval cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. The oval face is cast with a raised scrolling floral relief on a fine textured ground, set between two rounded end tabs. It measures 102mm x 42mm x 23mm overall (4 inch wide, 1.6 inch tall). A screw hole in each end tab gives 87mm = 3.4 inch spacing. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India. Catalogue code: SH-ITH-DRWP-018-IR

Drawer Pull

With a deep fluted shell bowl, the "Eglaim" black antique iron drawer pull is a half-moon cup pull in cast iron with a black powder coated finish. It measures 95mm (3.7 inch) x 45mm (1.7 inch) x 25mm overall. Three screw holes fix it in place, two at the lower ends set 84mm (3.3 inch) apart and one at the top, 28mm (1.1 inch) above them. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India. Catalogue code: SH-EGL-DRWP-009-IR

Drawer Pull

The "Gezer" Black Antique Iron Drawer Pull is a cast iron cup pull for opening drawers, cabinets and cupboards, finished in black powder coat. Its hooded cup carries a raised scrolling leaf pattern and comes to a soft point along the lower edge. Each rounded end tab has one screw hole. It measures 105mm x 40mm x 21mm overall: 105mm (4.1 inch) long, 40mm (1.5 inch) tall and 21mm in height, with 91mm (3.5 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-GEZ-DRWP-011-IR

Drawer Pull

The "Emmor" black antique iron drawer pull is a rectangular bin-style pull in cast iron with a black powder coated finish, its backplate and raised front covered in an embossed foliage pattern. It measures 88mm (3.4 inch) x 35mm (1.3 inch) x 18mm overall. Two screw holes, one at each end, are set 76mm (2.9 inch) apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India. Catalogue code: SH-EMM-DRWP-008-IR

Drawer Pull

The "Harim" Black Antique Iron Drawer Pull is a rectangular cast iron bin pull for drawers, cabinets and cupboards in black powder-coated finish. Its flat front plate carries a scrolled centre motif above a band of rounded lobes, between flared end tabs that each hold one screw hole. It measures 106mm x 25mm x 18mm overall: 106mm (4.1 inch) long, 25mm tall and 18mm in height, with 88mm (3.4 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-HAR-DRWP-014-IR

Drawer Pull

The "Hazael" Black Antique Iron Drawer Pull is a cast iron bar pull for drawers, cabinets and cupboards, finished in black powder coat, with a dense floral and leaf relief and small rosettes across its rectangular face. Hammered-texture end tabs with shaped edges each carry one screw hole. It measures 106mm x 25mm x 18mm overall: 106mm (4.1 inch) long, 25mm tall and 18mm in height, with 88mm (3.4 inch) between the screw-hole centres. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-HAZ-DRWP-015-IR

Drawer Pull

The "Iconium" Black Antique Iron Drawer Pull is a rectangular cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. Its face carries a dense raised leaf-and-floral pattern framed by a beaded border, giving an ornate antique look. It measures 91mm x 29mm x 21mm overall (3.5 inch wide). Two screw holes, one at each end, sit 82mm = 3.2 inch apart. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India. Catalogue code: SH-ICO-DRWP-017-IR

Drawer Pull

The "Elzaphan" black antique iron cabinet pull and drawer handle is a cast iron pull in a black powder coated finish, measuring 125mm x 51mm x 15mm overall. A U-shaped handle, held in two square posts, sits on a flat rectangular backplate with a screw hole in each corner. The holes are set 110mm apart across and 37mm apart down, and the handle spans 92mm between its legs. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India; it is packed in U P, India. Catalogue code: SH-ELZ-DRWP-006-IR

Drawer Pull

The "Ibri" Black Antique Iron Drawer Pull is a half-moon cup-style pull in cast iron with a black powder-coated finish, made for opening drawers and cabinet fronts. It measures 96mm x 55mm x 23mm overall (3.7 inch wide, 2.1 inch tall). The deep curved cup sits inside a wide flange with a lightly textured antique surface. It fixes with three screws, one at the top and one at each lower end; the lower holes are 83mm = 3.2 inch apart, and the top hole sits 33mm = 1.2 inch above them. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin is India, and it is packed in U P, India. Catalogue code: SH-IBR-DRWP-016-IR