Door Lever Handle suppliers in India

Door Handles

The "Pekahiah" black iron door handle with plate is a wrought iron lever handle on a back plate, supplied as one pair with spindle and screws. Each scrolled lever sits on a hammered-texture back plate with a fleur-de-lis top, a keyhole cut-out and fixing holes at both ends, all in black powder coated finish. The back plate measures 170mm x 48mm x 4mm and the handle 105mm x 36mm x 56mm, with an overall width of 121mm. Fixing holes sit 32mm apart across the top, 31mm across the bottom, and 130mm and 131mm top to bottom; the keyhole is 22mm. Made in India, with a 2 year warranty. Catalogue code: SH-PEK-HNDP-009-IR

Door Handles

The "Philip" black iron door handle with plate is a pair of wrought iron lever handles on rectangular back plates with wavy top and bottom edges, used to open and close a door latch. Each plate has a hammered-texture surface, four screw holes and a round rose carrying a scroll lever with a rounded end, all in a black powder coated finish. The back plate measures 154mm x 54mm x 4mm and the handle 100mm x 60mm. The set is supplied as one pair with spindle and screws. It is made in India and comes with a 2 year warranty. Catalogue code: SH-PHI-HNDP-008-IR

Door Handles

The "Abiathar" Zinc Door Handle with SS Plate is a flat-lever handle set for doors, made of an SS plate and a zinc handle in a Satin Nickel finish. It comes as one pair, with matching screws. The lever is a broad, flat bar with a rounded tip that folds back into a rounded collar where it meets the plate. It is set on a long back plate with rounded ends, with a keyhole cut-out below the lever, round at the top with a long slot beneath, and four countersunk screw holes, two at each end. Made in India, it carries a 2 year warranty. Catalogue code: SH-ABI-HNDP-002-SS

Door Handles

The Gath SS Door Handle with SS Plate is a lever handle set for doors in a Satin Nickel finish, made of an SS plate and a zinc handle. It is supplied as one pair, with matching screws. The lever has a softly curved, rounded grip and sits on a tall back plate with rounded ends. A keyhole cut-out sits below the lever, and four screw holes, two at each end, fix the plate to the door. Made in India, it carries a 2 year warranty. Catalogue code: SH-GAT-HNDP-013-SS

Door Handles

"Salathiel" black antique iron door handle with plate: a pair of wrought iron lever handles in a black powder-coated finish on short back plates. Each plate has a fleur-de-lis top, a rounded three-lobed foot and an all-over hammered texture, and fixes with four screw holes, two at each end. The smooth lever sweeps out from a teardrop rose into a wide curl with a flicked tail. The back plate measures 169mm x 49mm x 5mm and the handle 121mm x 55mm x 56mm, with a 137mm overall width. The fixing holes sit 32 hole to hole across, and 129 and 130 hole to hole lengthwise. Matching screws come with the pair. Made in India, with a 2 year warranty. Catalogue code: SH-SAL-HNDP-015-IR

Door Handles

The "Abishalom" Zinc Door Handle with SS Plate is a Satin Nickel lever handle set for doors, with a 178mm x 110mm back plate and a 102mm x 18mm handle, made of an SS plate and a zinc handle. It comes as one pair, with matching screws. The rounded lever runs straight out from the plate and measures 102mm (4 inch) long with a 45mm height. The back plate, 178mm (7 inch) tall and 110mm (4.3 inch) across, has a raised border, a 22mm (Ky) keyhole below the lever and a pair of screw holes at each end, spaced 13mm hole to hole across and 143mm hole to hole from top to bottom. Made in India, it carries a 2 year warranty. Catalogue code: SH-ABI-HNDP-003-SS

Door Handles

"Sepharad" black iron door handle with plate: a pair of wrought iron scroll-lever handles on tall back plates, black powder coated. Fleur-de-lis points finish both ends of each plate, which has a raised beaded border, a diagonal panel pattern, a screw hole at top and bottom and a keyhole cut-out. The lever rises from a patterned rose and ends in a tight scroll. The back plate measures 251mm x 43mm x 5mm and the handle 127mm x 35mm x 61mm, with a 134mm overall width, a 35mm keyhole and 211mm hole to hole. Spindle and screws are included. Made in India, with a 2 year warranty. Catalogue code: SH-SHE-HNDP-016-IR

Door Handles

"Abiezer" SS door handle with SS plate: a pair of satin nickel lever handles that pair an SS back plate with a zinc handle. The plain rectangular plate has softly rounded corners, two screw holes at each end and a cylindrical key hole, and the lever is straight with squared edges. The plate is 203mm = 8 inch long and 49mm = 1.9 inch wide, with a 109mm = 4.2 inch handle, a 34mm cylindrical key hole, 179mm hole to hole lengthwise and 26mm hole to hole across. Matching screws come with the pair. Made in India, with a 2 year warranty. Catalogue code: SH-ABI-HNDP-001-SS

Door Handles

"Amos" Black Iron Door Handle With Plate is a pair of wrought iron lever handles on backplates in Black Powder Coated finish, for operating a door latch. Each rectangular backplate has a hammered texture, wavy top and bottom edges and four screw holes, and the two handles are mirrored for both sides of the door. The handles are also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, the pair carries a 2 year warranty and comes with matching screws. Backplate dimensions are 110mm x 49mm x 4mm, with screw holes 32mm and 83mm hole to hole. Handle dimensions are 93mm x 105mm x 65mm, and the lever projects 3.6 inch. Catalogue code: SH-AMO-HNDP-001-IR

Door Handles

"Bahurim" Black Iron Door Handle With Plate: a pair of wrought iron lever handles, each on a rectangular back plate with a keyhole, in a Black Powder Coated finish for doors. It is supplied as one pair with matching screws and spindle. Each back plate is listed as 131mm x 40mm x 10mm, and its depth is also given as 8mm Height. The handle measures 102mm x 18mm x 58mm, reaching 4 inch from the plate. The keyhole is 23mm, and the four fixing holes on each plate sit 25mm = 0.9 inch apart across and 116mm = 4.5 inch apart top to bottom. Made in India, it carries a 2 year warranty. Catalogue code: SH-BAH-HNDP-003-IR

Door Handles

"Rehob" black iron door handle with plate: a pair of straight-lever wrought iron handles on narrow rectangular back plates, finished in black powder coat. The plates end in V-notched points top and bottom, with a hammered texture, a screw hole at each end and a keyhole cut-out below the lever. The flat lever flares toward its tip and carries an embossed dash pattern, with a cross motif at the rose. The back plate measures 258mm x 46mm x 34mm and the handle 126mm x 28mm. The set spans 132mm in width, with a 56mm height, a 34mm keyhole and 216mm hole to hole. Spindle and screws are included. Made in India, with a 2 year warranty. Catalogue code: SH-REH-HNDP-014-IR

Door Handles

"Cyrus" Black Iron Door Handle With Plate pairs a scrolled lever with a long hammered-texture backplate that ends in fleur-de-lis style points at top and bottom. It is made of wrought iron in a black powder coated finish, and each pointed end of the plate carries two screw holes. The back plate measures 196mm x 53mm x 3mm, and the handle 92mm x 53mm x 50mm, with a 92mm lever and 50mm height. Fixing holes are 31mm apart across and 140mm apart from top to bottom. Supplied as one pair with matching screws. Made in India, with a 2 year warranty. Catalogue code: SH-CYR-HNDP-004-IR

Door Handles

"Rahab" black iron door handle with plate: a pair of wrought iron lever handles on long back plates in a black powder-coated finish. Each back plate rises to a pointed, flared crest and has an ornate rosette at the lever's base, a beaded collar, a hammered-texture lower section with a keyhole cut-out, and a screw hole at each end. The lever has a leaf-textured top and curls into an open scroll. The back plate measures 247mm x 52mm x 5mm and the handle 118mm x 47mm x 60mm, with an overall width of 134mm, a 36mm keyhole and 218mm hole to hole. Spindle and screws come with the pair. Made in India, with a 2 year warranty. Catalogue code: SH-RAH-HNDP-013-IR

Door Handles

"Azmon" Black Iron Door Handle With Plate is a pair of wrought iron lever handles on long keyhole backplates in Black Powder Coated finish, for a door with a keyed lock. Each ornate backplate has trefoil cut-outs, curled ends at the top and bottom, a hammered texture and a 20mm keyhole below the curved lever, and the two handles are mirrored for both sides of the door. Made in India, the pair carries a 2 year warranty and comes with matching screws. Back plate dimensions are 235mm x 49mm x 4mm and handle dimensions 98mm x 112mm x 56mm, with a handle that measures 27mm at the tip. Screw holes are spaced 145mm, 72mm and 30mm hole to hole. Catalogue code: SH-AZM-HNDP-002-IR

Door Handles

"Eunice" Black Iron Door Handle With Plate sets a grooved lever on a narrow hammered-texture backplate with wavy top and bottom edges. It is made of wrought iron in a black powder coated finish, with two screw holes at each end of the plate. The back plate measures 152mm x 40mm x 5mm, and the handle 97mm x 18mm x 60mm, with a 97mm lever and 60mm height; plate and lever together span 108mm in width. Fixing holes are 23mm apart across and 124mm apart from top to bottom. Supplied as one pair with matching screws. Made in India, with a 2 year warranty. Catalogue code: SH-EUN-HNDP-005-IR

Door Handles

The "Raguel" black iron door handle with plate pairs a scrolled lever with a tall back plate tipped in fleur-de-lis at both ends. Made of wrought iron in black powder coated finish, it is supplied as one pair with spindle and screws. The hammered-texture plate has a keyhole cut-out and two fixing holes at each end. It measures 196mm x 54mm x 4mm, and the handle 88mm x 25mm x 54mm, with an overall width of 102mm. Fixing holes sit 31mm apart across the top, 32mm across the bottom, and 141mm and 140mm top to bottom; the keyhole is 21mm. Made in India, with a 2 year warranty. Catalogue code: SH-RAG-HNDP-012-IR

Door Handles

The "Pethahiah" black iron door handle with plate is a pair of wrought iron lever handles on long back plates with fleur-de-lis shapes at both ends and a keyhole below the lever, for use with a door lock. Each scroll lever turns on a round rose set on a hammered-texture plate, finished in black powder coat. The back plate measures 198mm x 53mm x 5mm (7.8 inch long) and the handle 103mm x 22mm x 57mm (4.0 inch). The overall width is 114mm = 4.4 inch, the fixing holes are 127mm = 5 inch apart from top to bottom, and the keyhole is 21mm = 0.8 inch. The set is supplied as one pair with spindle and screws, made in India, with a 2 year warranty. Catalogue code: SH-PET-HNDP-010-IR

Door Handles

"Nicodemus" Black Iron Door Handle With Plate is a short-plate lever door handle: a straight wrought iron lever on a compact rectangular backplate with a screw hole in each corner, in a black powder coated finish. The plate is 80mm long and 44mm wide, with an 8mm height marked at the plate. The lever reaches 101mm = 3.9 inch, with 59mm height. Hole spacing is marked as 25mm = 0.9 inch across and 116mm = 4.5 inch down. Supplied as one pair with matching screws. Made in India, with a 2 year warranty. Catalogue code: SH-NIC-HNDP-007-IR

Door Handles

The "Rachab" black iron door handle with plate is a pair of wrought iron lever handles with straight, square-section levers on plain rectangular back plates, used to open and close a door latch. Each lever rises from a faceted, pyramid-shaped boss, and each plate has four corner screw holes, all in a black powder coated finish. The back plate measures 151mm x 40mm x 7mm and the handle 127mm x 23mm x 52mm, with an overall width of 134mm. The fixing holes are 26mm apart across the top and bottom and 136mm apart from top to bottom. The set is supplied as one pair with spindle and screws, made in India, with a 2 year warranty. Catalogue code: SH-RAC-HNDP-011-IR

Door Handles

"Gabriela" Black Iron Door Handle With Plate combines a scrolled lever with a curled tip and a rectangular keyhole backplate edged with a rope-twist border. It is made of wrought iron in a black powder coated finish, with two screw holes at each end of the plate. The back plate measures 154mm x 53mm x 8mm, and the handle 98mm x 18mm x 65mm, with a 98mm = 3.8 inch lever and 65mm height. Fixing holes are 23mm = 0.9 inch apart across and 123mm = 4.8 inch apart down the plate, and the key hole is 19mm. Supplied as one pair with matching screws. Made in India, with a 2 year warranty. Catalogue code: SH-GAB-HNDP-006-IR