Cabinet Pull Handle suppliers in India

Cabinet Pulls

The 5" "Bezek" Black Antique Iron Cabinet Pull is a cabinet handle with a twisted, rope-style grip between two spade-shaped end plates, each with one screw hole. It is cast iron, black powder coated, with a textured surface. Overall dimensions are 133mm x 29mm x 35mm; the label reads 133mm = 5.2 inch, with 108mm = 4.2 inch between screw holes. The label names it the 4inch "Bezek" Black Antique Iron Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered. Catalogue code: SH-5"-BEZ-CAB-006-IR; the label reads SH-4inch-BEZ-CAB-040-IR

Cabinet Pulls

The 4" Chuza Black Antique Iron Cabinet Pull is a bow-shaped cabinet handle with fleur-de-lis style end plates, each with one screw hole. It is cast iron, black powder coated, with a hammered-texture surface. Overall dimensions are 93mm x 31mm x 24mm; the label reads 93mm = 3.6 inch, with 75mm = 2.9 inch between screw holes. The label names it the 4inch "Chebar" Black Antique Iron Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered. Catalogue code: SH-4inch-CHU-CAB-009-IR; the label reads SH-4inch-CHE-CAB-044-IR

Cabinet Pulls

The 4 Inch "Tahpenes" Black Antique Iron Cabinet Pull is a plain bow-shaped wrought iron handle for cabinet doors and drawers. Its smooth D-shaped grip ends in two flat, rounded tabs, each with one screw hole. It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 104mm x 14mm x 26mm (length x width x height), with 83mm hole to hole. Country of origin is India, and it carries a 2 year warranty. Catalogue code: SH-4" -TAH-CAB-015-IR

Cabinet Pulls

The "Calno" Black Antique Iron Cabinet Pull is a bar handle for cabinet doors and drawers, with a grip banded by raised rings on two rounded mounting posts. It is made of cast iron in a black powder coated finish with a lightly textured surface. Overall dimensions are 111mm x 17mm x 38mm; the label reads 111mm = 4.3 inch. The label names it the "Calno" Black Antique Iron Door And Cabinet Pull. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered. Catalogue code: SH-CAL-DOP-008-IR; the label reads SH-CAL-DOP-043-IR

Cabinet Pulls

The 4" "Abinoam" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with fleur-de-lis style ends, for pulling open cabinet doors and drawers. A curved, hammered-texture grip runs between two flared, pointed end plates, each with one screw hole, shown in a black powder-coated finish. Overall dimensions are 103mm x 32mm x 19mm: 103mm = 4 inch long, 32mm wide and 19mm in height, with 81mm = 3.1 inch between the two screw holes. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-4"-ABI-CAB-004-IR; the product label reads SH-4inch-ABI-CAB-034-IR

Cabinet Pulls

8 inch "Ebenezer" Black Antique Iron Cabinet Pull is a curved cast iron bow handle with a fluted face, for cabinet doors and drawers. Parallel ribs run the length of the gently curved grip, which flares out at each end. The back carries two round fixing points for the matching screws supplied. It has a black powder coated finish and is supplied as one piece. Country of origin is India, and it carries a 2 year warranty. Catalogue code: SH-EBE-CAB-015-IR

Cabinet Pulls

6 inch "Uzai" Black Antique Iron Cabinet Pull is a cast iron handle with a dimpled, hammered-look grip, made for cabinet doors and drawers. The grip steps out on offset legs to two round end plates, each with one screw hole. It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 153mm x 23mm x 39mm, with 128mm = 5 inch between the fixing holes. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty. Catalogue code: SH-UZA-CAB-014-IR

Cabinet Pulls

The "Jaakobah" Black Antique Iron Cabinet Pull is a 6 inch wrought iron handle for cabinet doors and drawers. Its turned grip swells gently through the middle and sits on two round posts with ringed collars at each end. It is made of wrought iron with a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 153mm x 23mm x 86mm, with 132mm hole to hole and 19mm thickness at the grip. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty. Catalogue code: SH-JAA-CAB-013-IR

Cabinet Pulls

The "Aeneas" brass cabinet pull is an ornate solid brass handle for cabinet doors and drawers, displayed in a satin nickel finish. Its bow-shaped grip has a fine beaded edge and ends in pierced scrollwork backplates with screw holes at each end, giving furniture a decorative, classic look. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty. Available finishes: Satin Nickel, Antique Brass, Antique Copper, Matt Black, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass Catalogue code: SH-AEN-CBNP-001-BR

Cabinet Pulls

The "Calah" Black Antique Iron Cabinet Pull is a wrought iron handle for cabinet doors and drawers, shaped as an offset grip with a faceted centre ridge set between two square, bevelled foot plates. Each plate has a screw hole at its outer edge, and the textured surface carries a black powder coated finish. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India. Catalogue code: SH-CAL-CAB-012-IR

Cabinet Pulls

The "Iturea" Black Antique Iron Door And Cabinet Pull is a cast iron D-shaped handle for doors and cabinets. Each end sits on a squared foot plate with a screw hole, and the grip has a lightly textured black powder coated surface. The pull also comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Overall dimensions are listed as 121mm x 21mm x 28mm; the product label marks 120mm = 4.7 in long, 22mm = 0.8 in wide and 31mm Height, with 103mm = 4 in Hole to Hole. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India. Catalogue code: SH-ITU-DOP-010-IR

Cabinet Pulls

The "Achab" Black Antique Iron Cabinet Pull is a cast iron door and cabinet pull for pulling open cabinet doors, drawers and room doors. Its grip is a ribbed, spiral-twisted bar set between two curved legs that end in round mounting feet, shown in a black powder-coated finish. Overall dimensions are 109mm x 18mm x 36mm: 109mm = 4.2 inch long, 18mm wide and 36mm in height. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Besides Black Powder Coated, it comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Catalogue code: SH-ACH-DOP-003-IR

Cabinet Pulls

The 4" "Bethany" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a smooth, rounded bow grip and fleur-de-lis end plates, for pulling open cabinet doors and drawers. Each pointed end plate has one screw hole, and the pull is shown in a black powder-coated finish. Overall dimensions are 105mm x 27mm x 25mm, with 27mm width and 25mm height. Its length is given as 105mm = 8.3 inch, and the screw holes sit 79mm = 3.1 inch apart. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-4"-BET-CAB-005-IR (label: SH-4inch-BET-CAB-005-IR)

Cabinet Pulls

The "Jahaziel" Black Antique Iron Cabinet Pull is a cast iron handle for cabinet doors and drawers, with a slim, gently curved flat grip running between spear-tipped fleur-de-lis ends, each with a screw hole. It comes in a black powder coated finish. Overall dimensions are 172mm x 32mm x 71mm: the label marks 172mm = 6.7 inch long, 32mm across the ends and 71mm Height, with 121mm = 4.7 inch between the screw holes. It is supplied as one piece with matching screws and carries a 2 year warranty. Country of origin: India; packed in U P, India. Catalogue code: SH-JAH-DOP-011-IR

Cabinet Pulls

"James" Black Antique Iron Cabinet Pull is an ornamental 4.8 inch wrought iron handle for cabinet doors and drawers. The arched grip is decorated with scrolling leaf and floral work, with a raised oval at the centre and one screw hole in each ornate end. It has a black powder coated finish and is supplied as one piece with matching screws. Overall dimensions are 124mm x 28mm x 23mm, with 59mm hole to hole. Country of origin is India, and it is packed in Uttar Pradesh, India. It carries a 2 year warranty. Catalogue code: SH-JAM-CAB-014-IR

Cabinet Pulls

The 4" "Tahpenes" brass cabinet pull is a plain D-shaped solid brass handle for cabinet doors and drawers, displayed in an antique copper finish. Sold as a 4" pull, its overall dimension is listed as 3.89". The smooth curved grip rises from two flat, round-ended feet, each with a single screw hole, and the copper finish shows darker shaded tones for an aged look. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty. Available finishes: Antique Copper, Antique Brass, Matt Black, Matt Chrome, Polished Chrome, Polished Lacquered, Polished Nickel, Satin Brass, Satin Nickel Catalogue code: SH-4"-TAH-CBNP-002-BR

Cabinet Pulls

The 4" "Talmai" Black Antique Iron Hand Forged Cabinet Pull is a bow-shaped handle for cabinet doors and drawers. Made of cast iron in a black powder coated finish, it has a hammered-texture surface and a round screw-hole plate at each end. Overall dimensions are 106mm x 32mm x 37mm; the printed label reads 106mm = 4.1 inch long, 31mm wide, 36mm height and 83mm = 3.2 inch between screw holes. It comes as one piece with matching screws, made in India, packed in U P, India, with a 2 year warranty. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered. Catalogue code: SH-4"-TAL-DOP-001-IR; the label reads SH-4inch-TAL-DOP- 001-IR

Cabinet Pulls

The 5" "Ben" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a wide, hammered-texture bow grip and fleur-de-lis end plates, for pulling open cabinet doors and drawers. Each pointed end plate has one screw hole, and the pull is shown in a black powder-coated finish. Overall dimensions are 126mm x 29mm x 27mm: 126mm = 4.9 inch long, 29mm wide and 27mm in height, with 96mm = 3.7 inch between the screw holes. It is supplied as one piece with matching screws, made in India, packed in U P, India, and carries a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-4"-BEN-CAB-007-IR; the product label reads SH-5inch-BEN-CAB-041-IR