Door Pull Handle suppliers in India

Door Pulls

The "Accho" Black Antique Iron Door Pull is a cast iron door and cabinet pull with clover-shaped end plates, each drilled with three screw holes, six in all. Its curved grip has a granular cast texture with banded detail near each end, and it is supplied as one piece with matching screws. Overall dimensions are 226mm x 49mm x 49mm; the size label reads 226mm = 8.8 inch long, 49mm wide and 49mm height, with the screw holes marked 118mm = 4.6 inch apart. The finish is listed as Black Powder Coated, the one finish offered, while the pull itself looks dark brown. Made in India, with a 2 year warranty. Catalogue code: SH-ACC-DOP-032-IR

Door Pulls

Compact and gently bowed, the "Ahlab" Brass Cabinet Pull is a solid brass pull handle for cabinets in a Polished Lacquered finish. Its slim grip joins two rounded, teardrop-shaped end plates, each with a single countersunk screw hole, and the polished surface has a bright gold tone. The pull is offered in Polish Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 5 year warranty. Catalogue code: SH-AHL-DOP-002-BR

Door Pulls

The "Amoke" black antique iron door pull is a cast iron handle in a black powder coated finish, with a curved grip set between two pointed, shield-shaped backplates. Each textured backplate has three screw holes. Overall dimensions are listed as 212mm x 52mm x 40mm; the marked measurements read 209mm length, 49mm and 46mm plate widths and 38mm height. Screw holes sit 174mm apart from end to end, 119mm and 116mm apart between the side holes, and 36mm and 33mm apart across each plate. The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Catalogue code: SH-AMO-DOP-001-IR

Door Pulls

The "Aidan" black antique iron door and cabinet pull is a cast iron handle with round end plates, a gently bowed grip and a black powder coated finish. Each round backplate takes two screws. Overall dimensions are 145mm x 37mm x 36mm. Screw holes sit 20mm apart on each plate, with 92mm and 126mm between holes from end to end. The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Catalogue code: SH-AID-DOP-002-IR

Door Pulls

The 9 inch "Pontius" black antique iron door pull is a one-piece cast iron door handle with a deep, bowed grip and pointed, cross-shaped end plates, each with one screw hole. Its overall size is listed as 228mm x 33mm x 40mm and marked as 228.6mm = 9 inch long, 33.2mm = 1.3 inch wide and 40.8mm Height; the screw holes sit 177.8mm = 7 inch apart. The surface has a hammered-look texture. Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty. Catalogue code: SH-PON-DOP-028-IR

Door Pulls

The "Aadan" black antique iron door and cabinet pull is a slim cast iron handle with spear-pointed ends, a curved grip and a black powder coated finish. Each pointed end carries one screw hole. Overall dimensions are 159mm x 15mm x 22mm. The pull is supplied as one piece with matching screws, made in India, with a 2 year warranty. It is also offered in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered finishes. Catalogue code: SH-AAD-DOP-003-IR

Door Pulls

The "Chelluh" Black Antique Iron Door Pull is a cast iron pull handle for doors with openwork ends. Its slim, gently curved grip splits into a V-shaped cut-out near each end, then turns down into rounded mounting feet, each drilled for a screw. The finish is black powder coated. It is supplied as one piece with matching screws, made in India and carries a 2 year warranty. Catalogue code: SH-CHE-DOP-041-IR

Door Pulls

The 7 Inch "Salmon" Black Antique Iron Door Pull is a smooth, matte black cast iron door handle with swept, scroll-like ends. A subtle twisted ridge runs along the grip, and each rounded foot has a small fixing hole in its base. It is supplied as one piece with matching screws. The finish displayed is Black Powder Coated; Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered are also offered. Made in India, with a 2 year warranty. Catalogue code: SH-7inch-SAL-DOP-029-IR

Door Pulls

The 10" Upharsin Black Antique Iron Hand Forged Door And Cabinet Pull is a hand-forged iron handle with a twisted centre grip, supplied as one piece in a black powder coated finish with matching screws. Its grip bends out between two spade-shaped end plates with three screw holes each. Overall dimensions are 256mm x 49mm x 44mm; the holes sit 236mm = 9.3 inch apart at the outer pair and 180mm = 7.1 inch apart at the inner pair. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-10"-UPA-DOP-023-IR

Door Pulls

The 6 Inch "Calah" Black Antique Iron Cabinet Pull is a cast iron cabinet handle with a faceted, tapering grip set between two square backplates. Each backplate has one screw hole and a raised pyramid-style centre, and the black surface carries a hammered texture. The finish displayed is Black Powder Coated. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and a fifth option listed as "415". Overall dimensions are listed as 156mm x 32mm x 56mm, a length of 6.1 inch; the height is also marked as 54mm. A 142mm (5.5 inch) span is marked along the grip. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-6inch-CAL-CAB-054-IR; also printed as SH-6inch-CAL-CAB-042-IR

Door Pulls

The "Achim" black antique iron door pull with back plate is a cast iron pull handle on a long back plate, supplied as one piece with matching screws. Fleur-de-lis tips with fixing holes finish both ends of the flat plate, and the shaped grip stands off on two arms. It comes in black powder coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered or Natural Rust Lacquered finish. The pull measures 135mm x 48mm x 53mm, its height also marked 53.2mm; the back plate measures 254mm x 47mm x 5mm, its width also marked 47.5mm = 1.8 inch. Fixing holes sit 152mm apart top to bottom and 25mm side to side. Made in India, with a 2 year warranty. Catalogue code: SH-ACH-DOP-015-IR

Door Pulls

Round end plates mark the 10" Uriah Black Antique Iron Hand Forged Door And Cabinet Pull, a hand-forged iron handle with a twisted centre grip, supplied as one piece in a black powder coated finish with matching screws. Each plate carries three screw holes. Overall dimensions are 249mm x 50mm x 44mm (249mm = 9.8 inch); the holes sit 241mm = 9.5 inch apart at the outer pair and 180mm = 7.1 inch apart at the inner pair. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-10"-URI-DOP-024-IR

Door Pulls

The "Lachish" black antique iron door pull with back plate is a one-piece cast iron unit that pairs a curved grip with a round-ended plate. The door pull measures 177mm x 22mm x 44mm (6.9 inch, 0.8 inch, 44mm Height) and the back plate 251mm x 50mm x 6mm (9.8 inch); the grip height is marked as 50mm Height. Grip and plate carry a hammered-look texture, and the plate has two screw holes at each end, 31mm = 1.2 inch across and 221mm = 8.7 inch lengthwise. Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty. Catalogue code: SH-LAC-DOP-063-IR

Door Pulls

The 8 inch "Pontius" Black Antique Iron Door Pull is a cast iron D-shaped door handle, supplied as one piece in a black powder coated finish with matching screws. Its curved, textured grip runs between two pointed end plates, each with one screw hole. Overall dimensions are listed as 203mm x 33mm x 40mm; the printed measurements read 33.2mm = 1.3 inch across and 40.8mm height, with 155mm = 6.1 inch between the screw holes. Other finishes are Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-8"-PON-DOP-033-IR

Door Pulls

The 7 inch "Baalim" Black Antique Iron Door Pull is a cast iron pull handle for doors, finished in Black Powder Coated. It has a straight, flat-faced grip that steps down to square mounting feet at each end. Overall dimensions are 188mm x 23mm x 42mm. The pull measures 7.4 inch long, with 165mm hole to hole and 11.5 mm thickness. It is supplied as one piece with matching screws, made in India, and comes with a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-BAA-DOP-034-IR

Door Pulls

The 8 Inch "Ithran" Black Antique Iron Door And Cabinet Pull is a straight cast iron bar handle for doors and cabinets. Its flat bar has an angled, faceted face that narrows toward the centre and stands on two round mounting posts. Overall dimensions are 222mm x 31mm x 32mm, a length of 8.7 inch, and the posts sit 171mm = 6.7 inch apart. The finish displayed is Black Powder Coated; it is also offered in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-8inch-ITH-DOP-064-IR

Door Pulls

The "Hazor" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets with a rounded, curved grip and flat rectangular end plates, each pierced with two screw holes. The black surface has a hammered texture. The finish displayed is Black Powder Coated, and the pull also comes in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-HAZ-DOP-055-IR

Door Pulls

The 7 inch "Delilah" Black Antique Iron Door Pull is a slim cast iron door and cabinet pull with a smooth, rounded bar arching between two narrow oval end plates. Each plate has two screw holes, four in all, and the pull is supplied as one piece with matching screws. The finish displayed is a silver Zinc Plated finish; the available finishes are listed as Nickel Plated and Black Powder Coated. Overall dimensions are 182mm x 14mm x 38mm. The size label reads 182mm = 7.1 inch long, 14mm wide and 38mm height, with the inner screw holes marked 133mm = 5.2 inch apart and the outer ones 158mm = 6.2 inch. Made in India, with a 2 year warranty. Catalogue code: SH-7inch-DEL-DOP-031-IR

Door Pulls

The "Helam" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets with a long, gently bowed grip rising from two rectangular backplates. Each backplate has one screw hole and an angled face where the grip meets it, and the black surface carries a hammered texture. The finish displayed is Black Powder Coated, and the pull also comes in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-HEL-DOP-056-IR

Door Pulls

The "Leaf" black antique iron door and cabinet pull is a one-piece cast iron handle shaped as a long leaf, 175mm x 53mm x 39mm overall (175mm = 6.8 inch). Raised veins and a beaded midrib run along the curved grip, which tapers to a pointed tip with one screw hole and widens into a flared base with two holes and a small curled hook. Fixing holes are marked 127mm = 5 inch and 126mm = 4.9 inch apart, with the base holes 35mm apart. Finished in Black Powder Coated, it is also available in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Matching screws are included. Made in India, with a 2 year warranty. Catalogue code: SH-LEA-DOP-038-IR

Door Pulls

The "Haahashtari" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets, with a curved D-shaped grip and spear-shaped ends. Each end has one screw hole, and the black surface carries a hammered texture for an antique look. The finish displayed is Black Powder Coated. It also comes in Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Overall dimensions are 195mm x 28mm x 39mm, a length of 7.6 inch, with 137mm (5.3 inch) between the fixing holes. It is supplied as one piece with matching screws, made in India, and carries a 2 year warranty. Catalogue code: SH-HAA-DOP-052-IR; also printed as SH-GAL-DOP-048-IR under the name "Gallim" Black Antique Iron Door And Cabinet Pull

Door Pulls

The 12inch "Amoke" black antique iron door pull is a long 308mm cast iron handle for doors, shown in a Black Powder Coated finish. A hammer-textured, squared grip runs between two pointed, shield-shaped end plates, each with three screw holes. Overall dimensions are 308mm x 59mm x 48mm; the top plate is 59mm wide and the bottom plate 55mm. Screw spacing is 272mm hole to hole end to end, 218mm and 220mm along the two sides, and 44mm and 36mm across the top and bottom plates. It is supplied as one piece with matching screws, made in India, with a 2 year warranty. Finishes offered are Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-12inch-AMO-DOP-014-IR

Door Pulls

The "Habor" Black Antique Iron Door And Cabinet Pull is a cast iron bow-shaped pull handle for doors and cabinets, set on two round mounting roses. It measures 190mm x 53mm x 40mm overall (7.4 inch long). Each round rose is 40mm across and has two screw holes 27mm apart; the hole centres along the pull are marked 148mm = 8.3 inch and 161mm = 8.3 inch. The thick, arched grip has a textured, hammered-look black surface. It is supplied as one piece with matching screws. The finish is Black Powder Coated, with Natural Iron Lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered also offered. Made in India, with a 2 year warranty. Catalogue code: SH-HAB-DOP-051-IR

Door Pulls

The "Bela" Black Antique Iron Door And Cabinet Pull is a cast iron handle for doors and cabinets, with a twisted, rope-style centre section on its grip and four-pointed end plates drilled for screws. Matching screws come with it. It is supplied as one piece in a Black Powder Coated finish. Overall dimensions are 249mm x 52mm x 44mm. Hole-to-hole spacing is marked as 228mm end to end, 191mm and 192mm along the sides, and 33mm across each end plate. Besides Black Powder Coated, it comes in Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India and packed in U P, India, with a 2 year warranty. Catalogue code: SH-BEL-DOP-010-IR