Door Bolt suppliers in India

Door Bolts

At 93mm x 75mm x 21mm, the 3.5" Amaziah Brass Tower Bolt is a solid-brass door tower bolt in a Polished Lacquered finish. Moved by its angled knob, the round bolt slides from a shaped six-hole backplate into a separate four-hole keeper, 20mm wide, to hold a door shut. The label printed with it names a 2 Inch "Amaziah" Brass Tower Bolt. It comes as one piece with a matching screw, is made in India and carries a 5 year warranty. Other finishes are Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass and Satin Nickel. Catalogue code: SH-3.5"-AMA-TBL-002-BR; the label reads SH-2Inch-AMA-TBL-001-BR

Door Bolts

5" "Caiphas" Black Antique Iron Door Bolt in wrought iron, a hammered-texture slide bolt with a curled handle that holds a door shut by sliding into its box keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated. The overall size is listed as 5"; the printed label names it the 126mm "Caiphas" Iron Door Bolt, with 144mm overall length, a 126mm backplate and 43mm width. Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-CAI-BLT-009-IR

Door Bolts

"Barachias" Black Antique Iron Door Bolt made of wrought iron in a black powder-coated finish, for holding a door shut by sliding the bolt into its keeper. The waisted backplate has a notched lower edge and a hammered texture, and carries four screw holes. The bolt runs through two guide straps and ends in a teardrop-shaped grip, and a separate two-hole keeper fixes to the frame. Overall dimensions are 165mm x 42mm x 31mm: 165mm = 6.5 inch long and 42mm = 1.6 inch wide, and 180mm = 7.10 inch with the keeper. Hole-to-hole spacing is 31mm on the keeper, 143mm along the plate and 26mm across its lower end. Supplied as one piece with matching screws, made in India, with a 2 year warranty. Catalogue code: SH-BAR-BLT-006-IR

Door Bolts

4" Abishur Iron Barrel Bolt, a slide bolt that keeps a door shut by sliding its round bolt into a cranked keep. It is made of iron and comes as one piece with matching screws; the finish displayed is Black Powder Coated, with a silver-tone bolt and knob handle. Backplate and keep each carry four screw holes. Overall dimensions are listed as 142mm x 62mm x 23mm; the printed size chart reads 94mm Length and 40mm Width, with 65mm hole to hole. Other finishes: Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-ABI-BLT-005-IR

Door Bolts

6 inch "Elishua" black antique iron door bolt in wrought iron with a black powder-coated finish. A sliding bolt with a round knob handle runs along a hammered-texture plate and shoots into a separate keeper to hold a door shut. The plate carries four screw holes and the keeper two, and matching screws are the listed accessory. Overall dimensions are listed as 6". The marked drawings give 156mm = 6 inch for the plate and 176mm = 6.9 inch from keeper top to plate base, with 38mm across the keeper, a 20mm keeper, 46mm height, 4mm thickness, 30mm hole to hole on the keeper and 126mm hole to hole on the plate. Supplied as one piece, made in India, with a 2 year warranty. Catalogue code: SH-6"-ELI-BLT-015-IR

Door Bolts

6.5 inch "Abishur" iron barrel bolt in black powder-coated iron. Its silver-tone bolt and knob handle slide in a black barrel fixed to a smooth flat plate, shooting into a separate keeper to hold a door shut. Six screw holes sit on the plate and four on the keeper, and a notched slot near the base takes the handle; matching screws are the listed accessory. Overall dimensions are 6.5". Supplied as one piece, made in India, with a 2 year warranty. Catalogue code: SH-ABI-BLT-011-IR

Door Bolts

5" Bedaiah Black Antique Iron Door Bolt in wrought iron, a slide bolt that secures a door by sliding its square bolt into an arched keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated. The shaped backplate has a hammered texture, flared ends and four screw holes. Overall dimensions are 121mm x 40mm x 25mm; the backplate is 108mm long, and the keep is 29mm hole to hole. Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-BAD-BLT-007-IR

Door Bolts

The 24 inch "Elishua" Black Antique Iron Door Bolt is a long wrought iron bolt for securing a door, listed at 24" overall. It is supplied as one piece in a black powder coated finish with matching screw, made in India and backed by a 2 year warranty. The narrow textured plate carries paired screw holes along its length, with a round knob handle at the foot of the bolt and a separate keep at the top. Marked sizes are 610mm = 24 inch long, 41mm = 1.6 inch wide, 55mm height and 5mm thickness, with holes 30mm, 189mm and 567mm apart. The label also marks 509mm = 24 inch, 24mm and 21mm. Catalogue code: SH-24"-ELI-BLT-017-IR

Door Bolts

8" Bedan Black Antique Iron Door Bolt in wrought iron with a black powder-coated finish, made for holding a door shut with a sliding bolt and keeper. Its hammered-texture backplate has rounded lobes at the lower end and six screw holes. The bolt slides through two guide straps and turns down into a T-shaped toe grip, and a separate arched keeper with three screw holes fixes to the frame. Overall dimensions are 198mm x 52mm x 30mm, with 182mm for the plate and a 20mm height at the upper strap. Hole-to-hole spacing is 38mm on the keeper, 68mm and 151mm along the plate, and 33mm across its lower end. Supplied as one piece with matching screw, made in India, with a 2 year warranty. Catalogue code: SH-BED-BLT-008-IR

Door Bolts

4.5" "Dibzahab" Black Antique Iron Door Bolt in wrought iron, a slide bolt with a round knob handle and a hammered texture that holds a door shut by sliding into its two-hole keep. It comes as one piece with matching screws and is finished in Black Powder Coated, the finish available. The overall size is listed as 4.5"; the printed label names it 4" "Dibzahab" and marks 116mm = 4.5 inch overall, a 104mm = 4 inch backplate, 37mm = 1.4 inch width and 76mm Hole to Hole. Made in India, with a 2 year warranty. Catalogue code: SH-DIB-BLT-013-IR

Door Bolts

The 12" "Elishua" brass tower bolt is a long solid brass barrel bolt for securing a door, with an L-shaped handle ending in a round knob that slides the bolt up into the keeper at its top end. Its rustic, textured surface carries a bright gold-tone Polished Lacquered finish, and the narrow backplate is drilled for screws along its length. Supplied as one piece with matching screws, made in India, with a 5 year warranty. Available finish: Polish Lacquered Catalogue code: SH-12"-ELI-BLT-003-IR

Door Bolts

The 6" "Abraam" black antique iron door bolt is a wrought iron slide bolt with a curled ring handle at its foot, made to hold a door shut by sliding the square bolt into its keeper. Overall dimensions are 152mm x 36mm x 37mm. The narrow backplate has a textured black surface in a Black Powder Coated finish and four screw holes set 135mm Hole To Hole, while the keeper's two holes sit 22mm apart. With the keeper in place the bolt reaches 155mm = 6.10 inch. Supplied as one piece with matching screws, made in India, with a 2 year warranty. Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered, Natural Rust Lacquered Catalogue code: SH-ABR-BLT-001-IR

Door Bolts

The 6" Abraham Black Antique Iron Necked Bolt is a wrought-iron door bolt in a black powder-coated finish, measuring 6" overall. Its flat bar runs through two guides on a textured, hammered-look backplate, with a round knob at one end and a cranked neck at the other that slides into a separate square keeper to hold a door closed. The backplate has six screw holes and the keeper two. It comes as one piece with a matching screw, is made in India and carries a 2 year warranty. Other finishes are Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Catalogue code: SH-ABR-BLT-002-IR

Door Bolts

4" Adrian Antique Iron Door Bolt in wrought iron, a slide bolt that holds a door shut by sliding into its keep. It comes as one piece with matching screws, and the finish displayed is Black Powder Coated. The hammered backplate carries a raised scroll pattern, with a ring-shaped pull at its base, four screw holes and a separate two-hole keep. Overall dimensions are 102mm x 30mm x 32mm; the backplate is 87mm long, with 72mm hole to hole. Available finishes: Black Powder Coated, Natural Iron lacquered, Natural Iron Unlacquered, Matte Buff Lacquered and Natural Rust Lacquered. Made in India, with a 2 year warranty. Catalogue code: SH-ADR-BLT-003-IR

Door Bolts

12 inch "Elishua" black antique iron door bolt, made of wrought iron and finished in black powder coat. Its long, hammered-texture plate guides a sliding bolt with a round knob handle into a separate keeper, holding a door shut. Pairs of screw holes run along the plate, the keeper takes two screws, and matching screws are the listed accessory. Overall dimensions are 12". Supplied as one piece, made in India, with a 2 year warranty. Catalogue code: SH-12"-ELI-BLT-016-IR

Door Bolts

5 inch "Abishur" iron barrel bolt with a black powder-coated finish. A bright silver-tone bolt with a knob handle slides through a black barrel on a flat, smooth plate and shoots into a separate keeper to hold a door shut. The plate has six screw holes and the keeper four, with a notched slot for the handle near the base; matching screws are the listed accessory. Overall dimensions are 5". Supplied as one piece, made in India, with a 2 year warranty. Catalogue code: SH-ABI-BLT-010-IR

Door Bolts

The "Achzib" decorative brass door bolt is a solid brass slide bolt in an Antique Copper finish, made to hold a door shut. Its rectangular backplate has a textured, antique-look surface with six screw holes, the square bolt runs through two guide straps with raised decorative motifs, and a curled ring handle at the foot slides it into the two-hole keeper at the top. Supplied as one piece with matching screws, made in India, with a 2 year warranty. Catalogue code: SH-ACH-DBL-001-BR

Door Bolts

The 8 inch "Elishua" door bolt is a black, antique-style wrought iron bolt that slides into its keep to hold a door shut, with an overall length of 8". Its Black Powder Coated finish covers a textured, hammered-look surface. A long flat backplate with a raised central channel carries the sliding bolt, which ends in a round knob. Screw holes run along both edges of the backplate and the separate keep. Made of wrought iron in India, it is supplied as one piece with matching screws and carries a 2 year warranty. Catalogue code: SH-8"-ELI-BLT-018-IR

Door Bolts

The 2" Amaziah Brass Tower Bolt is a solid-brass door tower bolt in a Polished Lacquered finish, measuring 56mm x 46mm x 14mm overall. A round bolt slides along a shaped backplate with six countersunk screw holes and, moved by its angled knob, enters a separate keeper plate to hold a door shut. The keeper is 12mm wide with holes 44mm = 1.7 inch apart. It comes as one piece with a matching screw, is made in India and carries a 5 year warranty. Other finishes are Antique Brass, Antique Brushed Nickel, Antique Copper, Black Nickel, Matt Chrome, Polished Chrome, Polished Nickel, Satin Brass and Satin Nickel. Catalogue code: SH-2 inch-AMA-TBL-001-BR; the label reads SH-2Inch-AMA-TBL-001-BR

Door Bolts

"Cappadocia" Black Antique Iron Door Bolt, a long wrought iron slide bolt for securing a door, with a curled hook-shaped handle and a box keep. It comes as one piece with matching screws and is finished in Black Powder Coated, the finish available. Overall dimensions are 163mm x 38mm x 47mm, or 6.4 inch long by 1.4 inch wide. The narrow backplate, 143mm = 5.6 inch long, carries raised scroll lines, with 140mm and 120mm Hole to Hole spacing. Made in India, with a 2 year warranty. Catalogue code: SH-CAP-BLT-012-IR

Door Bolts

The 4.5" "Dimonah" Black Antique Iron Door Bolt is a wrought iron bolt for securing a door, supplied as one piece in a black powder coated finish with matching screw. It is made in India and backed by a 2 year warranty. The hammered-texture backplate carries four screw holes, the sliding bolt ends in an S-shaped hook handle, and a separate keep fixes with two screws. It is listed at 4.5" overall; the label marks 116mm = 4.5 inch overall and 104mm = 4 inch for the plate, and names the product 4" "Dimonah". Further marked sizes are a 37mm = 1.4 inch keep width, 38mm height, and 19mm and 76mm hole to hole. Catalogue code: SH-DIM-BLT-014-IR

Door Bolts

The “Abiathar” heavy duty iron door bolt is a spring-loaded wrought iron bolt with a black powder-coated body, made for holding doors shut. A coiled spring wraps the bright silver-coloured pin, which ends in an L-shaped handle. The curved black housing has four fixing holes. It is supplied as one piece with matching screws, made in India, comes with a 2 year warranty and is offered in Black Powder Coated finish. Overall dimensions are 142mm x 62mm x 23mm (length, width, height). The pin is 10mm thick, the housing runs 73mm and the handle leg 40mm. Fixing holes sit 47mm apart lengthwise and 25mm apart across. Catalogue code: SH-ABI-BLT-004-IR