MSN Automobiles

Exporter, WholesalerBengaluru, Karnataka

Business type

Exporter, Wholesaler

Based in

Bengaluru Karnataka

Catalogue

36 products

Their products

36 items

Spare Parts for Commercial and Passenger Vehicles36 products

Air Brake Walls

Air brake valves ("Air Brake Walls") for commercial vehicles such as trucks, buses and trailers. These valves control the flow of compressed air that applies and releases the brakes. The range shown covers a multi-circuit valve with domed caps and large threaded ports, a valve with a black ribbed silencer at its base and brass port fittings, square-flange foot brake valves with four mounting studs, and a valve with a long operating rod and linkage. All have cast silver-grey bodies with threaded air ports.

Radiator

Radiators for commercial and passenger vehicles, used to cool the engine coolant as it passes through the finned core. Each radiator has a rectangular silver core packed with fine fins between flat tubes, closed by black tanks along the top and bottom with mounting lugs and hose outlets. Some units come with a white expansion tank fitted on top of the core.

Level valve

Level valve (levelling valve) for air suspension on commercial vehicles such as trucks, buses and trailers. It senses the height of the chassis above the axle and lets air into or out of the suspension bellows to keep the ride height steady as the load changes. The unit has a silver metal body with several air ports fitted with blue caps, a long straight steel operating rod, and a black lever and linkage arm that connect it to the axle.

Chasis parts

Chasis parts for commercial and passenger vehicles: cast mounting brackets that join parts to the vehicle frame. The range includes heavy black-finished brackets with round bored eyes for pins and bushes, flat mounting faces drilled for bolts, and stiffening ribs cast into the body. One part is a bracket carrying an upright shaft with a threaded end. Parts carry cast-in markings on the body.

Brake shoe

Brake shoes for the drum brakes of trucks, buses, trailers and passenger vehicles. When the brake is applied, the shoe presses its friction lining against the inside of the drum to slow and stop the wheel. The shoes are curved, black-finished assemblies with the lining fixed by rows of rivets along the face, a roller at the cam end and a pivot bush at the anchor end. Separate curved lining segments are also part of the range for relining worn shoes.

Steering & suspension

Steering and suspension spare parts for commercial and passenger vehicles. The line includes a pump unit with a black housing, a round silver mounting flange on top and brass threaded port fittings on the side, with a small identification plate on the body. It also covers grey cast-metal valve units, each with several threaded ports and mounting holes in the body.

Brake pad and Linings

Brake pads and linings for commercial and passenger vehicles, the friction parts that press against the brake disc or drum to stop the vehicle. The pads come in pairs on backing plates. They are supplied with fitting hardware: spring retaining clips, bolts, caps and wire leads with plug ends.

Slack adjuster

Slack adjusters for the air brakes of trucks, buses, trailers and passenger vehicles. A slack adjuster links the brake chamber pushrod to the S-cam shaft and keeps the brake set to the right clearance as the linings wear. The range includes a green-painted adjuster with a long arm and mounting eye, a splined centre bore, a grease nipple, a bolted metal cover plate and a gold-coloured control arm with a slotted bracket; its arm carries the cast marking 5015. Versions also come with a green arm and bronze-coloured body, and in an all-black finish.

Air spring

Air springs for the air suspension of trucks, buses, trailers and passenger vehicles. An air spring carries the vehicle's load on a cushion of compressed air and smooths the ride over rough roads. The range covers rolling-lobe air springs with black rubber bellows. Versions include a round bellows on a black base piston, a bellows on a bright metal base, and bellows with a metal top plate carrying threaded mounting studs and an air inlet fitting.

Fastners

Fasteners (listed as "Fastners") for trucks, buses and other commercial and passenger vehicles, covering flanged nuts, lock washers and threaded studs. The line includes a black hex nut with a wide integral flange collar and an internal thread, a black split spring lock washer, and a black threaded stud with a collar and a ribbed section along the shank. All the parts carry a dark black finish.

Brake Cam Bush

Brake cam bush for the brake camshaft of commercial and passenger vehicles. It lines the camshaft bracket, giving the S-cam shaft a smooth bearing surface to turn in when the brake is applied. The bush is a bronze-coloured cylindrical sleeve with a diagonal seam and rows of small holes and dimples spread across its surface.

Trailer parts

Trailer parts for commercial vehicle trailers, covering fittings for the trailer body and its support gear. The range includes a long bolt with a smooth shank, a spacer sleeve, flat washers and a lock nut with a yellow insert; a grey box-shaped bracket with a yellow lever handle; and a pair of black support legs with a crank handle, foot plates and mounting plates.

Air Compressor

Air compressor for commercial and passenger vehicles, the engine-driven unit that supplies compressed air for the air brake system. It comes in single-cylinder and twin-cylinder versions. Each has a finned black cylinder block under an aluminium head with threaded air ports. The drive end carries a flanged mounting face and a threaded drive shaft with a nut.

Wheel rim

Wheel rims for commercial and passenger vehicles. The main rim has a silver-painted finish, a flat centre disc with a large centre bore and a ring of ten stud holes, oval cut-outs around the disc and a tyre valve. The line also includes a blue-grey painted rim and a red-brown split ring band with holes along its face.

Brake Diaphragm

Brake diaphragm for the air brake chambers of commercial and passenger vehicles. It is the flexible disc inside the chamber that moves under air pressure and pushes the push rod to apply the brake. The diaphragm is moulded in black rubber in a shallow dome shape, with a flat flange rim around the edge that is clamped between the chamber halves and a round raised centre that bears on the push-rod plate.

Starter

Starter motors for commercial and passenger vehicles, the electric motor that cranks the engine to get it running. The units have a black cylindrical motor body with a solenoid mounted along the top, a geared pinion at the drive end that meshes with the engine flywheel, and threaded electrical terminals on the solenoid and end cover. One version has a silver end cap; others are black throughout.

Lights

Vehicle lights for trucks, buses, trailers and cars, covering front and rear lamps. The range includes a headlamp assembly with a clear lens over twin reflector chambers in a black housing; a long rear combination tail lamp with red, amber and clear segments for stop, indicator and reversing signals; and a small round red marker lamp on a black base with two mounting holes. These lamps replace damaged or worn units and keep the vehicle visible on the road.

Alternator

Alternators for commercial and passenger vehicles. Driven by the engine belt, an alternator charges the battery and powers the vehicle's electrics while the engine runs. The alternators shown have a silver housing with cooling vents and a black multi-groove belt pulley at the front, with mounting lugs and bolt holes cast into the body. One version carries a black connector housing at the rear.

Power steering pump

Power steering pump for commercial and passenger vehicles, the engine-driven pump that supplies hydraulic pressure for power-assisted steering. It comes in a bare cast aluminium body and a black-painted cast body. Each has a flanged mounting face with bolt holes and a slotted drive shaft at the centre. The black version carries brass threaded hose fittings for the pressure and return lines and a riveted nameplate on its side.

Prop.shaft center bearing

Propeller shaft centre bearing (prop.shaft center bearing), a spare part for commercial and passenger vehicles. It supports a two-piece propeller shaft at its midpoint and holds it steady between gearbox and rear axle. The bearing sits in a thick black rubber cushion inside a black mounting bracket, with a flat base and a bolt hole on each side for fixing to the chassis cross-member. The bearing race shows a coloured seal facing outward.

Showing 20 of 36 in Spare Parts for Commercial and Passenger Vehicles

Show 16 more

Service	Note
European Truck Spare Parts
European Car Spare Parts
Heavy Equipment Spare Parts
European & Indian Bus Spare Parts
On Road & Off Road Spare Parts
Diesel Generator Spare Parts

Disclaimer

Information shown here is compiled from the details provided by the seller.

Legal name	MSN Automobiles
GST	29AASFM4389G2ZH
Location	Bengaluru, Karnataka, India
Category	Truck, Bus & Trailer Spare Parts
Speciality	Spare parts for trucks, buses, trailers and passenger vehicles — own brands FETCHER and LITECH
Address	No.1,2,3, Ground Floor, Sufiyan Complex, 2/1, H Siddaiah Rd, Behind Bharath TheatreView on map ↗
Website	www.msnautomobiles.com
Instagram	@msn_automobiles
Email	info@msnautomobiles.com
Catalogue	36 products
Exports	Yes
Quality	MSN AUTOMOBILES products reliability leads to proven quality, in compliance with state of the art technology. Each product will undergo integrated management system, Quality assurance and guarantee management.
Brands	FETCHER, LITECH
Other phones	080 41496680 (Office)9742663671 (Phone)
Other email	msnautomobiles@yahoo.co.in

MSN Automobiles

Their products

The company

Other services

What's verified

In their own words