Two Wheeler Styling & Control Parts suppliers in India

Handle Bar

Moto Torque Advento Series handlebar in white for the Kawasaki KLX 230 (CBU), made specifically for this bike for on-road and off-road riding. It improves handling and rider control, reduces vibration for a more comfortable ride and adds confidence on rugged trails, rough terrain and long-distance adventure touring. The high-strength construction carries a corrosion-resistant finish, and the precision direct fit installs easily while keeping the motorcycle's original geometry. The white bar has a cross brace carrying a "MOTO TORQUE" decal. Fits: KAWASAKI KLX 230

Exhaust

Moto-Torque "Beat" performance exhaust in chrome, a motorcycle silencer with a universal clamp system for all UCE (Unit Construction Engine) models. It is dyno-tested to deliver up to a 15% overall performance gain, with smoother acceleration and better throttle response, while keeping the classic character of the motorcycle. The universal clamp fits across UCE models with simple clamp-on fitting, sparing any custom fabrication. High-grade ceramic wool insulation, listed as "Premium Ceramic Wool", handles heat and gives a deep, rich tone that holds up over time. The silencer has a long, tapered body in polished chrome, a stepped, ringed wide end and the Moto Torque logo etched on the side. Fits: CLASSIC 350, CONTINENTAL GT, GT 650, METEOR 350, RE HUNTER 350, SUPER METEOR 650

Windshield Visor

Double bubble racing visor, or windshield, for the Yamaha YZF-R15 V3, made as a direct fit that uses the bike's original mounting points. Its raised double bubble curve directs wind over the rider's helmet, so high-speed riding is smoother, with less helmet buffeting and more comfort. The screen is a dark tint with a sleek gloss black finish that suits the R15's sporty lines and gives the front a race-inspired look. It is made from impact-resistant plastic to withstand road debris and everyday wear. Four mounting holes sit along the lower edges, and installation is hassle-free. Fits: Yamaha YZF-R15 V3 (R15-V3)

Handle Bar

Moto-Torque Advento handlebar for the CLASSIC 350 REBORN, a black braced bar of heavy-gauge tube with 22.2mm diameter and 2mm wall thickness that bolts on and keeps the existing cables. It sets an upright seating position that reduces back pain on long, city and adventure rides and adds confidence. Expert MIG welding gives a uniform finish, and a 7 tank powder-coating process keeps it long lasting and unfaded for years. Two aerodynamically designed arrow plates with drilled holes stand out and take a mobile, drone or GoPro holder or other mounts. Knurling is given at the appropriate points, and both ends take optional handlebar weights. A must-upgrade for the CLASSIC 350 REBORN, "BY THE RIDERS FOR THE RIDERS". Fits: CLASSIC 350

Windshield Visor

MTechnics black metal visor for the Yamaha MT-15, made from 1.2MM mild steel (MS) sheet with a painted black finish. It gives the MT-15 front a sharper streetfighter look while adding wind deflection and front-end protection. The visor is built for an OEM-style fit and installs using the stock bolts. It is a layered, angular steel panel with slotted vents, cut-out side brackets and an "MT-15" mark on the upper right. The product name lists it as black; the product type entry reads Metal Visor (Red). Listed weight is -380g and product measurement -25x18x8. Fits: Yamaha MT-15

Exhaust

Moto-Torque "BOLT PRO" slip-on performance exhaust in a polished finish for the Interceptor 650 and GT 650, also listed for the Continental GT. The pair of tapered silencers is made from 304 Grade Stainless Steel and uses a High-Density Ceramic Blanket imported from the USA, with heat resistance up to 1600 Degrees. It is built to add power, lift performance and bring out the Moto-Torque sound: "Dyno Approved", performance-oriented, with a 15% Performance Boost and a lightweight build. It aims for a balance of price and performance, the DB Killer is removable, and the exhaust carries a Lifetime Warranty. The kit pairs the mirror-polished silencers with matching polished heat shields printed "BOLT PRO", two black DB Killer inserts, an Allen key and fitting screws. Fits: Interceptor 650, GT 650, Continental GT

Windshield Visor

Double Bubble Visor 2.0 wind deflector for the Bajaj Pulsar 150 and 180, in black, made as a direct bolt-on fit using the stock mounting points. Its enhanced double bubble 2.0 curve directs wind flow over the rider, for smoother high-speed cruising, more riding comfort and less helmet buffeting. The gloss black screen gives the Pulsar a bold, race-inspired front look and a clean, aggressive style that complements the front fascia. It is made from impact-resistant plastic to withstand road debris and daily wear. The tapered shield has four mounting holes. Fits: Bajaj Pulsar 150, Bajaj Pulsar 180 (PULSAR 150/180)

Hugger

Carbon fiber BMW-type tyre hugger, a "Universal Tyre Hugger" rear mudguard for KTM, Bajaj and other bikes from Duke and RC to MT 15, R15 V4 and RTR 310. Colours are listed as Black, Red and Golden, and a blue bracket arm also appears. It sits close to the rear tyre to catch mud and water spray. The guard is curved, with a glossy carbon fiber pattern finish. It is carried on a cut-out bracket arm with bolted joints and a forked mounting end. Fits: APPACHE 160, APPACHE 200, Bajaj NS-160, Duke 125, Duke 200, Duke 250, Duke 390, KTM 390 Adventure, KTM Adventure 890, KTM Enduro 390, KTM RC 200, KTM RC 390, MT 15, R15 V4, RTR 310

Windshield Visor

Yamaha YZF-R15 V1 and V2 aerodynamic visor windshield deflector in black with a dark tint. It deflects high-speed wind away from the rider, reducing helmet buffeting and giving the bike a sleek, track-inspired front stance. The curved profile redirects oncoming wind over the rider to minimise drag and fatigue on long rides. It is a direct fit for the YZF-R15 V1 and V2, using the stock mounting points for easy installation. It is made from high-impact, weather-resistant plastic built to withstand daily wear and road debris, and the black finish gives the front cowl an aggressive, sporty look. The tall shell has flared side wings and paired mounting holes down each side. Fits: R15-V1, R15-V2

Windshield Visor

Tall dual-tone windshield visor (flyscreen) for the Royal Enfield Interceptor 650 and Continental GT 650, supplied as a procured kit. A tall smoked, tinted screen sits over a brushed silver metal lower plate, fixed with bolts and carried on black side brackets with mounting pins. It mounts directly above the round headlight and shields the rider from some of the oncoming wind. Fits: Royal Enfield Continental GT, GT 650, Interceptor

Windshield Visor

MTechnics red metal visor for the Yamaha MT-15, a windshield visor made from durable 1.2MM mild steel (MS) sheet with a sporty painted red finish. It gives the MT-15 a sharper, more aggressive streetfighter look while adding wind deflection and front-end protection. The visor is a direct, OEM-style fit and installs easily with the stock bolts. Two red panels sit either side of a black centre section, with three vent slots cut into the upper left panel and slotted black side brackets for mounting. The product type is Metal Visor (Red). Product weight is listed as -380g and product measurement as -25x18x8.

Winglet

Black aerodynamic winglets (bike wings) for sports motorcycles such as the Yamaha R15, Ninja 650, Honda CBR and KTM RC models, fitted along the front fairing. These track-inspired winglets give the front profile an aggressive, race-ready look that elevates the bike's styling. They are built to withstand road vibrations and harsh weather, and are tailored for a precise fit onto the fairing structure; professional installation is recommended. The finish is a sleek matte black style that blends with fairings and custom paint; the winglets have a glossy black surface, with a swept, curved shape and a raised rib along each wing. Fits: Yamaha R15 V3/V4, R15-V3, R15 V4, Ninja 650, NINJA 650R, Honda CBR650, CBR 1000 RR, KTM RC 125 / 200 / 390, KTM RC 200, KTM RC 390

Exhaust

Red Rooster RRP Rumbler Ace black exhaust for the Royal Enfield Classic 350 (2024–2026), also made for the RE Classic 350/500, Standard 350/500 and Thunderbird 350/500. It is a direct bolt-on replacement, tuned for the deep RE thump. The Rumbler Unibody is a single-piece SS304 stainless steel body for strength, long life and corrosion resistance. Its free-flow design improves throttle response, pickup, torque and horsepower. Ceramic wool packing handles heat and controls noise, and a removable DB killer switches between a refined city note and a bold highway roar. The black silencer has a tapered body and slash-cut tip, and comes with a silver link pipe, black brackets, nuts and bolts, a key chain and sticker. Fits: BULLET STANDARD, CLASSIC 350, ELECTRA 350

Handle Bar

Moto-Torque handlebar for the Royal Enfield Bullet, a bolt-on upgrade made from heavy-gauge tube of 22.2mm diameter and 2mm wall thickness. It fits with the existing cables left in place and sets the rider upright, reducing back pain on long, city and adventure rides for more confident riding. Expert welders MIG weld the joints for a uniform finish, and a 7 tank powder coating process keeps the look unfaded for years. The black bar carries 2 aerodynamically designed Arrow plates. Mobile, drone and GoPro holders and other devices mount easily, both ends take optional handlebar weights, and knurling sits at the appropriate points. "By the riders for the riders." Fits: Bullet Standard, Classic 350, RE Hunter 350

Exhaust

Moto-Torque semi-full exhaust system for KTM motorcycles: a mid bend pipe and end can for the Duke, RC, Adventure and Enduro models. Lighter than the stock exhaust, it adds engine performance with a race-bike sound note, fits easily and works with the stock engine mapping. The muffler and bend pipe are stainless steel 304 grade, with an Aluminium outer sleeve on the end cap. High-density silicon wool imported from the USA gives heat resistance up to 1600 Degree, and a DB killer quiet inserter comes with it. The body carries a lifetime rust warranty; heat turns the steel a bit yellowish after use, the nature of stainless steel, which the warranty excludes. Fits: Duke 125, Duke 200, Duke 250, Duke 390, KTM 390 Adventure, KTM Adventure 890, KTM Enduro 390, KTM RC 390

Windshield Visor

Black visor windshield deflector for the Bajaj Pulsar RS200, shaped to match the RS200's sporty fairing. Its curved profile channels high-speed airflow over the rider, reducing helmet buffeting and drag on highway rides for better stability and comfort. It is custom-designed for the RS200 for a seamless, factory-like finish, and it mounts onto the standard factory points. It is made of impact-resistant plastic built to withstand road debris and daily weather. The tinted black screen has a glossy finish, a raised centre section, a pointed lower edge and a row of mounting holes along each side. Fits: Bajaj Pulsar RS200 (RS 200)

Handle Bar

Moto-Torque handlebar for the Xpulse 210 in black, a direct-replacement steel bar supplied with the original clutch cable for a proper fit and an easy installation. Made from high-strength mild steel, it gives vibration dampening and stability across terrain and resists impact. Its ergonomic geometry promotes a more upright posture, reducing fatigue and strain on long rides, and is tuned for responsive control and confident riding. Whether upgrading for adventure or replacing worn-out parts, it brings factory-fit reliability with aftermarket performance. The bar has a black powder-coated finish and a straight crossbar between the risers. The powder coating carries a 6-month warranty, and the nuts and bolts carry a lifetime warranty. Fits: Impulse, Xpulse 200, Xpulse 210

Exhaust

Moto-Torque "Beat" performance exhaust in black: a matte black tapered silencer with a polished chrome stepped end, made for all UCE (Unit Construction Engine) models with a universal clamp system. Dyno-tested for up to a 15% gain in overall performance, it gives smoother acceleration and better throttle response, and it chases real power rather than just a louder sound. The universal clamp fits across UCE models with simple clamp-on fitting, sparing any custom fabrication. High-grade ceramic wool insulation handles heat and keeps a deep, rich tone that holds up over time, while the motorcycle keeps its classic character. The Moto Torque logo is etched on the black body. Fits: CONTINENTAL GT, GT 650, METEOR 350, RE HUNTER 350, SUPER METEOR 650

MTechnics side stand base for the KTM 2025 Adventure 250 and Adventure 390 (ADV 250/390 2025), a bolt-on side stand extender that widens the foot of the stand. Its wide footprint gives better ground grip and reduces the risk of the parked bike sinking into gravel, mud, sand, soft ground and uneven trail surfaces. The base is made from 3MM and 2.5MM mild steel sheet, powder coated black, and weighs 170g, with dimensions given as 15X7X9. A round cup takes the stand's foot, and four bolts sit at the corners of the plate. All mounting hardware is included: M4 15MM CSK bolts and nuts. It is made as a direct fit for the standard 2025 ADV 250 and 390, excluding the Adventure R model. Fits: KTM ADV 250/390 2025 (Adventure 250, Adventure 390); also listed under Adventure 390 (2025), KTM 390 Adventure, KTM Adventure 890

Windshield Visor

White painted MTechnics metal visor for the Yamaha MT-15, a windshield visor cut from durable 1.2MM mild steel (MS) sheet. It sharpens the MT-15 front with a more aggressive streetfighter look and adds wind deflection and front-end protection. The visor is a direct, OEM-style fit that installs easily with the stock bolts. White panels flank a black centre section, with three vent slots on the left panel, MT-15 lettering cut into the right panel and slotted black side brackets for mounting. The product type is listed as Metal Visor (Red), and the finish is painted white. Product weight is listed as -380g and product measurement as -25x18x8.

Handle Bar Raiser

MTechnics handlebar riser for the KTM Adventure 250 and 390 (ADV 250/390 2025), a handle bar raiser that lifts the bar by 1.5 inches for a more upright riding position. The higher bar eases strain on the back, shoulders, wrists and arms, improving comfort and control on long tours, highway cruising, city commutes and off-road trails. The kit is two black risers, CNC-machined from aluminium for strength at a light weight, each with a split clamp top held by two bolts over a round base. It is a bolt-on install using M10 90MM Allen bolts and nuts. The finish is listed as anodized and also as black powder-coated, for resistance to corrosion, scratches, weather, mud and dust. Made in India. Fits: ADV 250/390 2025, Adventure 390 (2025), KTM 390 Adventure, KTM Adventure 890

Windshield Visor

Heavy-duty stainless steel metal visor for the Yamaha MT-15, a bolt-on headlight shield that gives the naked bike a sharper, street-fighter front. It protects the front end from road debris and is built to handle all weather conditions, matching the MT-15's headlight stance. The stainless steel body carries a matte/powder-coated black finish meant to guard against rust and scratches, with a dark textured surface. The angular shield has a cut-out emblem, slotted vents and two side brackets fixed with bolts. It mounts directly onto the factory points for a precise, gap-free fit on MT-15 models. Fits: MT 15

Handle Bar

KTM handlebar for the KTM 200/250/390, with a modern black finish that brings out the bike's aggressive, sporty look. It is made from aluminium or steel for long-lasting strength and performance. The ergonomic design reduces rider fatigue and improves comfort, gives better control and stability on rough or uneven terrain, and helps damp vibration for a smoother ride. It suits both on-road and off-road riding, and installation is hassle-free on most KTM models. The bar has a low centre section that sweeps up and out to the grips, with knurled bands at the clamping area and an etched KTM logo near the centre. Fits: KTM 200/250/390, Duke 125, Duke 200, Duke 250, Duke 390, KTM RC 200, KTM RC 390, KTM Enduro 390, Adventure 390 (2025), KTM 390 Adventure, KTM Adventure 890

Handle Bar

Moto-Torque handlebar for the XPULSE 200 4v, a black braced bar with white and red MOTO TORQUE lettering, built from heavy-gauge tube of 22.2mm diameter and 2mm wall thickness. It bolts on and keeps the existing cables. An upright seating position reduces back pain on long, city and adventure rides and builds rider confidence. Expert MIG welding gives a uniform finish, and a 7 tank powder-coating process keeps it long lasting and unfaded for years. Two aerodynamically designed arrow plates with drilled holes give a standout look and mount a mobile, drone or GoPro holder or other devices. Knurling sits at the appropriate points, and both ends accept optional handlebar weights. A must-upgrade bar for the XPULSE. Fits: XPULSE 200 4v, IMPULSE, XPULSE 200, XPULSE 210