Bicycle Carrier suppliers in India

Carriers

Carrier Matha bicycle luggage carrier, model SC-CA-117, in BCP finish. The bright metal rack has an open top deck with cross slats, a front clamp with a bolt, and two twisted stays with flat drilled ends that fix it to the bicycle frame. Catalogue code: SC-CA-117

Fasteners

Bicycle carrier fitting, model SC-FC-110, with a square or hex nut, used to fix a carrier to a bicycle. It has a thread of ¼” x 20 TPI and a length of 50.5 MM, and comes in Black, BCP or ZP finish. The fitting is a flat metal strap bent down at both ends, with a round-head bolt passing through it and a hex nut on the threaded shank.

Carriers

The "MTB" bicycle carrier SC-CA-107 is a rear rack sized for 20 and 22 inch frames, holding a bag or parcel over the rear wheel. Its rectangular top deck has a spring clip across it to hold a load in place, with a flat plate at the back end. Angled side stays meet at the bottom eyelets, and a short front mount fixes the rack to the frame. It is finished in BCP.

Carriers

Bicycle carrier "SLR", model SC-CA-105, is a rear luggage rack for bicycles with a 14, 16 or 20 inch frame. It holds a bag, box or parcel over the rear wheel. The top deck is an open wire grid with a flat plate across the back end. Two long stays run down to eyelet ends, and two shaped front arms with eye ends fix the rack to the frame. It comes in a BCP or black powder coated finish.

Carriers

The "TUBLER TYPE" bicycle carrier, model SC-CA-111, fits cycles with a 26" wheel and has a black powder coated finish. It gives the rear of the cycle a deck for carrying a bag or load. Its top is a rounded tubular frame with curved scroll-shaped rods inside, set on two long single stays with eyelet ends for bolting at the rear.

Carriers

The "SWIFT" bicycle carrier, model SC-CA-109, is a black powder coated rear rack for 24 and 26 inch wheels with a moveable front arm. It carries a bag, box or parcel over the rear wheel. The front arm moves up and down for fixing to the frame. The wire grid deck rests on a single long stay on each side, each ending in an eyelet.

Carriers

"PHOENIX" bicycle rear carrier, model SC-CA-104, for 20" and 22" frames, adding a rack above the rear wheel for carrying loads. It comes in a BCP finish with a bright chrome look. The carrier has a rounded tubular rail frame with a wire-braced deck and small top plate, two flat front mounting ends, and two round rod stays with flattened, drilled ends that fix at the rear axle. Part numbers: SC-CA-104 Fits: 20"/22" Frame

Carriers

"DOUBLE BODY" bicycle rear carrier, model SC-CA-102, sized for a 20" frame, a rack that lets a bicycle carry loads behind the saddle. It comes in a BCP or black finish. The carrier is built from tubular rails forming a double-layer body with cross bars on top, two hooked front ends for fixing to the bicycle, and two flat stays with twisted sections and holes that run down to the rear wheel mounts. Part numbers: SC-CA-102 Fits: 20" Frame

Carriers

Wire spring clip for a bicycle carrier, sold as Carrier Spring, model SC-CA-117. A single length of bright wire forms a tall arch with a coiled spring on each side and hooked ends that fit to the carrier, so the arch presses down to hold a load in place. Catalogue code: SC-CA-117

Carriers

Made for 26 inch wheel bicycles, the "CUBA" bicycle carrier, model SC-CA-106, is a rear rack that carries a bag, box or parcel over the back wheel. Its open wire deck ends in a broad flat plate at the back. Two long stays reach down to eyelet ends, and a pair of shaped front arms fix the rack to the frame. It is finished in BCP.

Carriers

The "QUEEN" bicycle carrier, model SC-CA-112, is made for cycles with a 26" wheel and is finished in black powder coat. It carries a bag or load over the rear wheel. A slim rod frame forms the deck, with curved rods inside it, and two long stays with eyelet ends brace it at the back. Two front arms with eyelet ends fix it to the cycle frame.

Carriers

The "UGANDA" bicycle carrier, model SC-CA-113, suits a 22" frame and has a black painted finish. Its wide, flat deck takes a bag, box or load at the back of the cycle. The deck is a rectangular flat-bar frame with ladder-style cross bars and a crossed brace underneath. Two twisted flat-bar stays with eyelet ends support it, and a bolt at the front fixes it to the frame.

Carriers

The "ANGLE TYPE" bicycle carrier, model SC-CA-114, is sized for a 20"/22" frame and has a black painted finish. It gives the back of the cycle a flat deck for a bag or load. The deck is a rectangular angle-section frame with ladder-style cross bars, and a curved rod arm runs over the top to hold the load in place. Two twisted flat-bar stays with eyelet ends support the deck, and a bolt at the front fixes it to the frame.

Carriers

French type bicycle carrier, model SC-CA-115, a luggage rack in size 26". Its tubular frame has a rectangular top deck with three lengthwise rails, two front mounting arms with flattened eye ends, and a pair of long struts that meet in a V with an eyelet mount at the base. The finish is color to order; this unit is finished in blue. Catalogue code: SC-CA-115

Carriers

The "LADY NEON DX" bicycle carrier, model SC-CA-110, is sized for cycles with a 26" wheel and comes in a black powder coated finish. It holds a bag or load above the rear wheel. The flat top deck is made of lengthwise round rods joined by cross rods, and it stands on two pairs of rod stays that end in bolt eyelets. Two bent front arms with looped ends fix the carrier to the frame.

Carriers

With double side stays on each side, the "DEVIL" bicycle carrier, model SC-CA-108, is a black powder coated rear rack for 24 and 26 inch wheels. It carries a bag, box or parcel over the rear wheel. The wire grid deck sits on two pairs of stays that join at eyelet ends, with a flat plate fitted between the rear stays. A long looped front arm fixes the rack to the frame.

Carriers

Formed metal bracket sold as Carrier Maina, model SC-CA-118, for bicycle carriers. The bright plated strip is bent into a stepped shape, with a rolled eye at one end, a centre hole, and a drilled lug at the other end for bolting in place. Catalogue code: SC-CA-118

Carriers

"ARROW CUT" bicycle rear carrier, model SC-CA-101, for 20", 22" and 24" frames, giving a bicycle a flat rack for carrying bags and loads behind the rider. It is offered in a BCP or black finish. The rack has a rectangular outer frame with three flat cross slats, a front clamp for fixing to the bicycle, and two flat twisted support stays that run down to the rear axle mounts. Part numbers: SC-CA-101 Fits: 20"/22"/24" Frame

Carriers

Heavy duty bicycle carrier, model SC-CA-116, with a plastic top set in a green tubular frame. The flat top panel fills the frame to carry loads on the bicycle, and a bolt fitting sits at the front end. Two twisted metal stays in a bright metal finish run down from the rear corners, each with a flat drilled end for mounting. Catalogue code: SC-CA-116

Carriers

"CHANNEL 3 PATTI / 4 PATTI" bicycle rear carrier, model SC-CA-103, made for 20" and 22" frames and used to carry goods on the back of a bicycle. It is offered in a BCP or black finish and in 3 patti and 4 patti versions. The rack has a long tubular channel frame with cross members on top, a bolted front mount, and two flat strap stays with twisted sections and a centre plate that reach down to the rear axle. Part numbers: SC-CA-103 Fits: 20"/22" Frame