Bicycle Bolt suppliers in India

Fasteners

Bicycle roofing bolt SC-FC-118 with a round head and a square nut, threaded ¼” x 26 BSW. Lengths run ½” - 3” and the finish is zinc plating. The domed head carries a single slot for a flat screwdriver, and the long shank is threaded along its length, with the square nut run onto the end in bright silver. Catalogue code: SC-FC-118

Fasteners

Bicycle draw bolt PH/T, Model No. SC-FC-104, with a ¼” x 26TPI thread, a 5/16” head, a length of 7.45 MM and a 3.5 MM hole. It comes in Black, ZP or BCP finish. A hex nut and flat washer sit on the threaded end, and the hole runs crosswise through the round body at the other end.

Fasteners

Bicycle bell bolt, Model No. SC-FC-102, a short hex-head bolt for fixing a bicycle bell in place. It has a ¼” x 26 TPI thread, a length of 7.6 MM and a BCP finish, with a bright metal hex head over a short threaded shank.

Fasteners

Bicycle frame bolt PH/P, model SC-FC-112, a long bolt for fastening bicycle frame parts, with a ¼” x 26 BSCY thread and a length of 50 MM. It comes in BCP, Black or ZP finish. The bolt has a rounded head and a shank threaded along its length, and it carries a hex nut and washer. The unit shown has a bright silver finish.

Fasteners

Bicycle mudguard bolt SC-FC-116 with an umbrella type head and a hex normal nut, made to fix a mudguard in place. Thread is 3/16” x 24 TPI, lengths run ½” - 2”, and the finish is ZP or Black. Each bolt has a domed head over a threaded shank, with the hex nut run onto the thread, in a bright silver finish. Catalogue code: SC-FC-116

Fasteners

Bicycle B.B. shell bolt, Model No. SC-FC-101, with a ¼” x 26 TPI thread and a length of 23 MM. It comes in a Rusty Black finish, a dark tone across the whole part, with the threaded stud at one end.

Fasteners

Bicycle draw bolt RL/T, model SC-FC-105, is a small threaded bolt with a cross hole through its flat head, used to hold a brake rod or cable in place on a bicycle. It has a ¼” x 26 TPI thread, a 5/16” head, a length of 19.75 MM and a 4.2MM hole. The bolt is fitted with a hex nut and washer, and the head carries a black finish with a bright metal nut. Finish options are Black / ZP / BCP.

Fasteners

Bicycle frame bolt RL/T, model SC-FC-113, with a hex nylock nut, for fastening bicycle frame parts. It has a 3/16” x 32 TPI thread and a length of 50 MM, and comes in BCP, Black or ZP finish. The bolt has a rounded head and a long shank threaded at the nut end, with two ring washers on the shank between head and nut.

Fasteners

Bicycle draw bolt SLR, model SC-FC-106, is a short 13.5 MM bolt with a rounded head and a 2 MM cross hole, used to hold a brake rod or cable in place on a bicycle. It has a ¼” x 26 TPI thread and a 5/14” head. The bolt is fitted with a hex nut and washer and shows a dull grey metallic finish. Finish options are Black / ZP / BCP.

Fasteners

Bicycle chain stay bolt, model SC-FC-111, a short hex-head bolt for the chain stay of a bicycle frame. It has a 1/4” x 26 TPI thread, comes in lengths of 7.5 MM - 12 MM, and is offered in Black, BCP or ZP finish. The hex head is stamped "SONA", and a hex nut sits on the short threaded shank. The bolts shown carry a dark finish.

Fasteners

Bicycle joint bolt, model SC-FC-115, with a hex head, a heavy duty nut and a washer. It has a 6/17” x 26 TPI thread and a 26 MM length, and comes in ZP or Black finish. The bolt passes through a bent, slotted metal clamp strip and is held by its hex nut, all in a silver zinc-coloured finish. Catalogue code: SC-FC-115

Fasteners

Bicycle seat pillar bolt SC-FC-119 for clamping the seat pillar, offered with a round head or hex head, a hex nut and a washer. Thread is 5/16” x 26TPI, length runs 1 ¼” - 2 ½”, and the finish is Black, ZP or BCP. The round-head version has a wide head, a smooth upper shank and a threaded end carrying a flat washer and hex nut, in a dark grey finish. Catalogue code: SC-FC-119

Fasteners

Mudguard bolt BSYE for bicycles, model SC-FC-117, with a round head, a hex normal nut and a washer. It has a 2/11” x 32 TPI thread and a ½” x 2” length, and comes in BCP, ZP or Black finish. The round head sits above a threaded shank carrying a flat washer and the hex nut, in a grey zinc-coloured finish. Catalogue code: SC-FC-117