Bicycle Parts suppliers in India

Saddle

Bicycle saddle SC-S-109 from SONA, made with a plastic base, a PVC top and two back springs. It fits the bicycle seat post as the rider's seat, and the springs at the back help cushion the ride. The top is smooth and black, with a rounded rear and a narrower nose, and the two springs are dark coil springs.

Pedals

Bicycle pedal model SC-P-125 is a block-style pedal that fits on the crank arm, giving the rider a flat footrest to push on while cycling. Two black rubber blocks with a textured tread sit on a chrome-finish frame, joined by a bright metal spindle tube. The threaded axle stands out on one side, and a domed end cap and corner bolts finish the outer end. Part numbers: SC-P-125

Handle

The MTB type bicycle handle bar, model SC-H-107, is a mountain-bike style handlebar used to steer the bicycle. It comes as a straight chrome bar with a gentle rise, and as a black bar fitted with a centre stem and black textured grips.

Carriers

Carrier Matha bicycle luggage carrier, model SC-CA-117, in BCP finish. The bright metal rack has an open top deck with cross slats, a front clamp with a bolt, and two twisted stays with flat drilled ends that fix it to the bicycle frame. Catalogue code: SC-CA-117

Fasteners

Bicycle carrier fitting, model SC-FC-110, with a square or hex nut, used to fix a carrier to a bicycle. It has a thread of ¼” x 20 TPI and a length of 50.5 MM, and comes in Black, BCP or ZP finish. The fitting is a flat metal strap bent down at both ends, with a round-head bolt passing through it and a hex nut on the threaded shank.

Saddle

Bicycle saddle SC-S-106 by SONA pairs a plastic base with a PVC top in a springless design. The black seat has a smooth finish and a tapered shape, wide at the rear and narrowing to a long nose, and serves as the rider's seat on a bicycle. Part numbers: SC-S-106

Accessories

Bicycle foot pump, model SC-AP-101, with a steel barrel, a double holding wire and a steel handle, for inflating cycle tyres. It is a tall floor-standing pump with a T-shaped chrome handle, a dark barrel, a long green hose and a base with flat metal foot plates on each side to hold the pump steady while pumping. The finish is BCP.

Chainwheel & Cranks

Bicycle chainwheel cotter pin, Model No. SC-CW-111, used to fix the crank arm to the bottom bracket axle. It comes complete with nut and washer, and it is threaded at one end to take the nut. The pin is a bright metal rod with a flat tapered face along its length, and the hex nut and washer sit on the threaded end.

Chaincover

Bicycle quarter chaincover, model SC-CC-106, a slim guard that covers the top run of a bicycle chain. A quarter chaincover shields the upper part of the chain and the top of the chainwheel, helping keep a rider's trousers and clothing clear of the chain and its grease. This model is a narrow dark navy bar with a red pinstripe along its edge, a slotted mounting end and a curved, hooked end that turns down over the chainwheel. A yellow and orange SONA decal runs along the side.

Front Forks & Fork Fittings

Fork Fitting Phillip Type, model SC-FF-108, is a bicycle fork fitting set: the headset parts that hold the front fork in the head tube and let it turn smoothly for steering. The set has seven silver-finish metal pieces: a hexagon lock nut, a flat washer and five ring-shaped cups and cones of different profiles. Catalogue code: SC-FF-108

Accessories

Bicycle lady basket, model SC-ABS-101, a wire-mesh carrier basket for holding shopping, bags and small loads on a bicycle. It comes in four styles, marked A to D. Style A is a white wire basket with rounded sides and a rolled top rim. Styles B and C are black mesh baskets, each with a mounting bracket at the back. Style D has a pale finish with a round panel on the front.

Front Forks & Fork Fittings

BMX type bicycle fork fitting, model SC-FF-112, a headset fitting set for BMX bicycles that holds the front fork in the head tube and lets it turn. It is a five-piece set in bright chrome finish: a small hex locknut, a wide flat washer, a flanged cup and two round rings, ready for BMX fork assembly and replacement.

Mudguards

French type bicycle mudguard set, model SC-MG-105, sized for 26-inch wheels. The front and rear guards keep mud and water thrown up by the wheels off the rider and the bike. The guards are long, smoothly curved metal sections with a slim profile, each held by a pair of wire stays. The finish is "Color to Order", here a bright, mirror-like silver finish. Catalogue code: SC-MG-105

Mudguards

Raleigh type bicycle mudguard stay, model SC-MG-108, made in 24-inch, 26-inch and 28-inch sizes. It supports the mudguard over the wheel and keeps it in line while riding. The stay is a straight metal rod with a flat bent tab at one end for fixing and a fitting at the other. It is offered in a "BCP/ZP" finish, here a light silver colour. Catalogue code: SC-MG-108

Spanners

B.B. Cup Wrench, model SC-TS-103, is a flat spanner for fitting and adjusting the bottom bracket (B.B.) cups of a bicycle. It is a black, double-ended tool with an open jaw at each end and a square opening at the centre of the handle.

B.B. Axle & Cups

Bicycle B.B. axle, model SC-BB-101, is a cottered bottom bracket axle that carries the crank arms and turns in the bottom bracket bearings. It comes in four versions: B.B. Axle Russian 42-53-46 mm, cottered, in a golden finish. B.B. Axle 37-54-46 mm, cottered, in a black finish. B.B. Axle PH/T 2C, cottered, in a BCP finish. B.B. Axle A8, cottered, with a black centre. Each axle is a stepped spindle with machined bearing shoulders, in gold, black, bright silver and a dark finish with a black centre.

Fasteners

Bicycle roofing bolt SC-FC-118 with a round head and a square nut, threaded ¼” x 26 BSW. Lengths run ½” - 3” and the finish is zinc plating. The domed head carries a single slot for a flat screwdriver, and the long shank is threaded along its length, with the square nut run onto the end in bright silver. Catalogue code: SC-FC-118

Pedals

Model SC-P-127 is a bicycle pedal of the block type, with a finely knurled tread on its black rubber blocks and an amber reflector. It fits on the crank arm and gives the rider a wide, flat footrest. The rubber blocks are held in a chrome-finish frame around a bright spindle tube, finished with a domed end cap, corner bolts and a threaded axle. Part numbers: SC-P-127

Frame & Parts

Phillip type curve bar bicycle frame, model SC-F-105, a step-through frame with a curved main tube and brazed up lugs and shell, offered in 18, 20, 22 and 24 inch sizes. As the main structure of a bicycle, the frame holds the fork, wheels, crankset, seat and handlebar. A curved upper tube sweeps down from the head tube to the seat tube, with a straighter tube below it running to the bottom bracket shell, giving an open, low entry. Seat stays and chain stays form the rear triangle. The finish is dark, with orange and yellow decals.

Saddle

Spring bicycle saddle SC-S-102 with a plastic base and top and two compression springs. It gives the rider a seat and mounts on the bicycle's seat post, with the two black coil springs set under the rear of the seat. The saddle is black with a wide, rounded shape and carries the SONA name in white on its side. Catalogue code: SC-S-102

Carriers

The "MTB" bicycle carrier SC-CA-107 is a rear rack sized for 20 and 22 inch frames, holding a bag or parcel over the rear wheel. Its rectangular top deck has a spring clip across it to hold a load in place, with a flat plate at the back end. Angled side stays meet at the bottom eyelets, and a short front mount fixes the rack to the frame. It is finished in BCP.

Accessories

Bicycle bell machine, model SC-AB-104, the working mechanism that makes a bicycle bell ring. A round black body carries the chrome striker parts and a coil spring, with a red-gripped lever at the top edge and a chrome clamp band at the side for fixing to the handlebar.

Hubs

SONA Raleigh / French type bicycle hub, model SC-HB-102, has a thin barrel with open ends and is made in front and rear versions. It forms the centre of a bicycle wheel, with the spokes laced into the drilled flanges and the wheel turning on the axle. The front hub measures 5/16" X 5 1/2" and the rear hub 3/8" X 6 1/2"/7". Finish is Black/BCP. The slim barrel carries the SONA name and runs between two drilled flanges, with threaded axle ends and nuts on each side.

Stands

Pistol type bicycle side stand, model SC-ST-107, a single-leg kickstand that holds a parked bicycle upright. It comes in black, with a curved mounting bracket at the top held by two fasteners, a long slim leg and a bent foot at the tip that rests on the ground.