Arme Locks

Manufacturer, ExporterAligarh, Uttar Pradesh

Business type

Manufacturer, Exporter

Based in

Aligarh Uttar Pradesh

Catalogue

138 products

Their products

138 items

← All products from this seller

Brass Mortice Handles · page 2

Brass Mortice Handles40 products

ABH-1061

Brass mortice handle ABH-1061 has a beaded gold-tone border and a lever with a curled, sculpted tip. It mounts on a long backplate and pairs with a mortice lock on a door. The size is listed as 250mm. The backplate has angled corners and a brushed silver-tone centre panel framed by a polished gold-tone rim with a dotted bead edge. The gold-tone lever carries a silver-tone accent where it meets the rose. A keyhole-shaped cutout for a lock cylinder sits in the lower half, and four screw holes, two at each end, fix the plate in place. Catalogue code: 3630

ABH-1149

Brass mortice handle ABH-1149 is a 300mm lever-on-plate set from the Regular Range, for doors fitted with a mortice lock. It pairs a brushed silver-tone centre plate with bright gold-tone end blocks cast in a column-capital pattern of leaves and scrolls. The scrolled lever, also gold-tone, ends in a ribbed tip. A profile-cylinder keyhole sits in the lower half of the plate, and two screw holes at each end fix it to the door face. Catalogue code: 3620

ABH-1131

ABH-1131 is a 275mm brass mortice handle from the Regular Range with an arched oval backplate and flared tips, made as a lever handle for doors fitted with a mortice lock. A central oval panel on a darker antique ground carries raised leaves, a flower, dots and small stars, framed by a brushed border with two screw holes at each end. A profile-cylinder keyhole cut-out sits in the lower half of the panel. The lever rises from a round collar through a turned ball neck into a cylindrical grip engraved with a leaf pattern and edged in rope detail. Catalogue code: 3622

ABH-1231

The ABH-1231 is a brass mortice handle in a satin silver-tone finish, a 300mm lever handle on a straight backplate for fitting with a mortice lock on a door. A squared lever with a gently curved tip sits on a rectangular plate with a stepped, polished edge and softly shaped ends. Below the lever is a euro-profile cylinder keyhole cut-out, and two screw holes sit at each end of the plate. Catalogue code: 3618

ABP-01

ABP-01 is a brass mortice door handle from the "Premium Range", with a temple-style pointed top, sold in 125mm, 250mm and 350mm sizes. Like any mortice handle set, it mounts on a door over a mortice lock and works the latch with its lever. The long backplate carries a lever handle and a euro-profile cylinder cut-out. It has a two-tone finish: satin gold-tone frames around dark, hammered-texture panels, with engraved bands at the top and bottom. The lever is smooth gold-tone with a dark patterned end cap. The design also comes as a short lever plate and a matching short cylinder plate with the same pointed top and engraved bands. Catalogue code: 37409

ABH-1095

ABH-1095 is an ornate 250mm brass mortice handle from the Regular Range, a lever handle on a long backplate for doors fitted with a mortice lock. Its antique-tone plate is crowned at the top and cast in relief with a floral spray, a laurel wreath around a shell motif and a ribbon, with reeded edges running down both sides. The lower plate is smooth and brushed, holding a profile-cylinder keyhole cut-out and two screw holes above a small flower ornament at the base. The lever is worked in a chevron rope pattern with a darkened ribbed panel and finishes in a scrolled end. Catalogue code: 37433

ABH-1095-C

The ABH-1095-C is an ornate brass mortice handle, a 250mm lever handle on a long backplate for fitting with a mortice lock on a door. The backplate is richly cast, with a crown-shaped top, floral and wreath motifs, fluted edges and a floral bottom end, all in an aged golden-bronze tone. The lever carries a rope-and-bead pattern along its grip. Below the lever, the plate has a euro-profile cylinder keyhole cut-out, and screw holes sit at the top and bottom for fixing. Catalogue code: 3625

ABH-842

ABH-842 is a 200mm brass mortice door handle from the Regular Range, with a silver-tone lever on a long keyhole plate for doors fitted with a mortice lock. The lever turns to draw back the lock's latch, and the keyhole in the lower plate lets the key reach the lock. The backplate has angled, cut corners at both ends and a stepped, polished silver-tone rim around a brushed centre panel. A smoothly curved scroll lever sweeps out from a round rose, and four screw holes, two at each end, secure the plate to the door. Catalogue code: 3613

ABH-701

ABH-701 brass mortice handle in the 175mm size, Regular Range, with a two-tone finish: a polished gold-tone frame around a satin silver-tone centre panel. It fits on a door over a mortice lock, with the lever working the latch. A row of small raised beads runs around the inside of the frame, and the plate has angled corners at the top and bottom. The gold-tone lever curves out from a round rose and finishes in a scrolled tip. A classic keyhole slot for a lever key sits below the handle, with screw holes at the top and bottom of the plate. Catalogue code: 3603

ABH-1410

ABH-1410 brass mortice handle in the 350mm size, from the Regular Range: a lever handle on a long backplate that fits over a door's mortice lock. The plate has a smooth satin antique-brass-tone face inside a stepped edge, with ornate scrolled ends at the top and bottom and an engraved oval medallion below the lever. The lever sweeps out from a round boss and ends in a curled, feather-like tip. A cylinder-shaped keyhole cutout sits in the lower half of the plate, and screw holes in the decorative ends fix it to the door. Catalogue code: 37438

ABH-1143

ABH-1143 is a 275mm brass mortice handle from the Regular Range whose smooth brushed centre plate is framed by beaded and rope-twist borders. It is a lever handle on a long backplate for doors fitted with a mortice lock. Carved palmette crests cap the top and bottom of the plate, each holding two screw holes, and a profile-cylinder keyhole cut-out sits in the lower half. The lever rises from a round collar through a turned ball neck into a cylindrical grip engraved with a leaf pattern, all in an antique brass tone. Catalogue code: 3621

ABH-706

ABH-706 brass mortice handle, 175mm size, Regular Range, pairing a satin silver-tone panel with a polished gold-tone frame and gold-tone crescent accents above and below the lever. It mounts on a door over a mortice lock. The swept lever is silver-tone at the base and gold-tone along its outer edge, turning from a round gold-tone rose. Ribbed details mark the shaped top and bottom of the frame. A classic keyhole slot for a lever key sits in the lower half, and screw holes near each corner of the panel fix the plate to the door. Catalogue code: 3608

ABH-1083

Brass mortice handle ABH-1083 comes in an all-silver-tone satin finish, with an open-loop lever on a curved, waisted backplate. It is made to pair with a mortice lock on a door. The size is listed as 250mm. The lever is a flat band that loops back on itself, leaving an open slot through its length. The backplate narrows at the middle and flares to stepped, rounded ends. A keyhole-shaped cutout for a lock cylinder sits in the lower half, and four screw holes, two at each end, fix the plate to the door. Catalogue code: 3626

ABH-1241

Black-and-gold brass mortice handle ABH-1241 is a 300mm Regular Range lever set made for mortice lock doors. The long plate has rounded ends and a matt gold-tone face framed by a black border, with black-filled scroll and palmette engraving at the top, bottom and sides. The straight lever carries a black inlay with a gold-tone engraved pattern. A profile-cylinder keyhole is set in the lower part of the plate, with a screw hole at each end for fixing. Catalogue code: 37436

ABH-1429

ABH-1429 brass mortice handle, 350mm size, Regular Range, in a two-tone antique look: a satin brass-tone plate set off by darkened recesses. It fits on a door over a mortice lock. The top and bottom carry an ornate crest with urn and leaf motifs, ending at the base in a pointed finial, and dark recessed bands with a fine pattern run down both sides of the plate. The lever turns from a round rosette boss, with a darkened inlay-style pattern along its length and a fan-shaped tip. A cylinder-shaped keyhole cutout sits in the lower half of the plate. Catalogue code: 37105

ABH-711

ABH-711 brass mortice handle in 175mm, set on a rectangular plate with clipped corners and a keyhole for a mortice lock. The brushed silver-tone face sits on a stepped, polished gold-tone edge, with two screw holes at each end for four fixing points in all. The curved lever runs from a gold-tone rose, silver-tone at its base and gold-tone toward the tip. Catalogue code: 3607

ABH-1051

Brass mortice handle ABH-1051 is a lever door handle on a long backplate, made to pair with a mortice lock on a door. The size is listed as 250mm. The backplate has scalloped top and bottom ends and a polished gold-tone border around a brushed silver-tone centre panel. A curved, scroll-shaped lever rises from a round gold-tone rose, with a silver-tone sweep at its base. Below the lever sits a keyhole-shaped cutout for a lock cylinder, and four screw holes, two at each end, fix the plate to the door. Catalogue code: 3629

ABH-713

ABH-713 is a 175mm brass mortice door handle from the Regular Range, a lever handle on a keyhole plate for doors fitted with a mortice lock. The lever turns to draw back the lock's latch, and the keyhole in the lower plate gives the key access to the lock. The long oval backplate has a brushed silver-tone centre framed by a stepped, polished silver-tone rim. A curved scroll-style lever with a curled tip rises from a round rose, and four screw holes, two at each end, hold the plate to the door. Catalogue code: 3609

ABH-1101

The ABH-1101 is a two-tone brass mortice handle in a 275mm size, a lever handle on a shaped backplate for fitting with a mortice lock on a door. A polished gold-coloured rim frames a satin silver-coloured centre panel, and the plate flares out at its top and bottom ends. The gold-coloured lever ends in a silver-coloured grip ringed with gold bands. The plate has a euro-profile cylinder keyhole cut-out below the lever and two screw holes at each end. Catalogue code: 3624

ABH-1202

The ABH-1202 is a brass mortice handle with a brushed satin gold-tone finish, a 300mm lever handle on a straight backplate for fitting with a mortice lock on a door. Its clean, modern lines pair a squared, slightly tapering lever with a rectangular plate that has a stepped edge and gently curved ends. A euro-profile cylinder keyhole cut-out sits below the lever, with two screw holes at each end of the plate. Catalogue code: 3619

Disclaimer

Information shown here is compiled from the details provided by the seller.

Legal name	Arme Locks
Location	Aligarh, Uttar Pradesh, India
Category	Locks & Builder's Hardware
Speciality	Mortice Handles, Mortice Cylinders, Mortice Locks, Door Locks
Address	C-233,234,Sec-2,Tala Nagari, Ramghat Road
Website	www.armelocks.com
Email	info@armelocks.com
Catalogue	138 products
Exports	Yes
Quality	We are using high quality material at every stage. Our plant is equipped with ultra modern machines along with research & development department to keep a continuous tab on high-grade quality.
Brands	TAWRI, ARME
Parent manufacturer	Gupta Industries
Export markets	Middle East, South East Asia & North America
Other phones	+91 89586 09582 (Alternative Inquiry Line)
facebook	facebook.com/arme.locks

Arme Locks

Their products

The company

What's verified

In their own words