Global Metal Company

Manufacturer, Exporter, Wholesaler, RetailerAligarh, Uttar Pradesh · since 2005

Business type

Manufacturer, Exporter, Wholesaler, Retailer

Based in

Aligarh Uttar Pradesh

Established

2005

Catalogue

349 products

Their products

349 items

← All products from this seller

Door Hardware · page 4

Door Hardware297 products

Door hardware and accessories

Pair of Bronze Finish Sunburst Rosette Door Plates

In a dark bronze finish with copper-toned edges, this pair of sunburst rosette door plates frames a door knob with a round sunburst medallion and hexagonal boss around a threaded knob hole. Each plate has a scrolled leaf crest above, two curled feet below and three slotted screws fitted. The plates are made of durable metal, and the sunburst design follows classic architecture. The hand-applied bronze finish gives a warm look and resists tarnish and wear. The rosettes install easily with a flush fit and suit traditional restoration projects, vintage-inspired home updates, replacement of old door hardware or new construction. Catalogue code: GMC-SUNBRPB-K

The Wells Passage Set in Polished Brass with Rice Door Knobs

Rice-pattern door knobs in polished brass distinguish this The Wells passage set, made for interior passage doors that stay unlocked, in a historic property or a new build. The set is made from high-grade solid brass for long durability. Its mirror-like polished finish is made to resist tarnish and wear. The rice-pattern knobs give a comfortable, ergonomic grip with a look that suits both traditional and modern interiors, and heavy-duty internal mechanisms give smooth, reliable operation for years. The round knob face is covered in a dense embossed pattern inside a beaded rim, with a central rosette boss and a fine-knurled edge. The tall polished brass backplate carries cast scrollwork crests at the top and bottom, rope-twist side borders and four slotted fixing screws. Catalogue code: GMC-90684CD-K

French Curve Commercial Cast Iron Door Pull Entry Hardware 15.75"

French Curve cast iron door pull, 15.75 inches long, for commercial entry doors such as storefronts, office buildings and boutique retail entrances. The pull sweeps in a long S-curve from a rolled scroll at the top to a smaller scroll at the foot, with a raised moulded line along its face, a mounting tab at each end and a short angled tab near the middle. The dark finish shows lighter highlights on the raised edges. It is heavy-duty cast iron, chosen for strength and wear resistance under daily heavy use, with resistance to corrosion and impact. Installation is easy. Catalogue code: GMC-3043-K

Dog Face Bin Pull in Bronze

The Dog Face Bin Pull in Bronze is a cast cup-style drawer and cabinet pull with a dog's head in relief at its centre. The face sits in a rope-edged roundel, flanked by stippled panels and cross-hatched texture, with a rounded ear at each end fixed by a slotted screw. It is cast from solid metal for longevity and a sturdy feel through daily use, and the hand-applied bronze finish gives a warm, dark tone that complements traditional and modern cabinetry. Designed for easy installation, it works as both a functional pull and a decorative accent, whether refurbishing antique furniture or updating kitchen cupboards. Catalogue code: GMC-gl-200243D-K

Victorian Style Ornate Rim Lock in Solid Brass

Victorian style ornate rim lock in solid brass for interior doors, with a matching keeper, keyhole escutcheon and two skeleton keys. Embossed floral and scroll relief covers the lock body, which has a square spindle hole, a keyhole, a latch bolt and fluted edges; the keeper and the small rectangular keyhole plate carry matching patterns. The two keys have ornate cast bows and hang on a split ring. Each unit comes with matching hardware components for straightforward installation. It is listed with an aged finish that develops a rich patina over time; the brass shows a bright, polished gold tone. Designed after 19th-century craftsmanship, it suits bedroom doors, studies, period parlours and historic renovations. Catalogue code: GMC-TJ-B6-K

Pair of Brass Sunburst Rosette Door Plates

This pair of brass sunburst rosette door plates in polished solid brass mounts a door knob within a Victorian-style design. Each plate has a round sunburst medallion with a hexagonal boss around the knob hole, a scrolled leaf crest above and two curled feet below, fixed by three screw holes. The sunburst motif follows classic architectural hardware and suits period homes or modern eclectic interiors. Each rosette is carefully polished to a radiant, tarnish-resistant finish that develops a rich patina over time. The plates install easily, take daily wear, and fit both the restoration of a historic property and an upgrade of current interior hardware, blending strength with vintage charm. Catalogue code: GMC-SUNBRP-K

Oil Rubbed Gothic Greek Revival Style Door Pull with Arched Top

Oil-rubbed bronze door pull in a Gothic and Greek Revival style, with an arched-top backplate, for entryways and interior doors. It suits the renovation of a historic property and adds a vintage touch to a modern build. The pull is forged from heavy-duty metal. Its deep oil-rubbed bronze finish gives a warm patina that resists corrosion and wear, which suits high-traffic entryways. It installs easily and is built to withstand the elements. The tall backplate rises to an arched top with three pointed Gothic arch panels and a band of triangle motifs. Below sits a textured centre panel holding a turned grip with a bulb-and-ring collar at its middle, and three recessed rectangular panels finish the base. Screw holes sit at the top, middle and bottom. Catalogue code: GMC-SHE700518B-K

Polished Brass Door Bell Victorian Style Electric Push Call Button

Victorian style electric door bell push button in polished solid brass, a period call button for front entrances that works with standard electrical doorbell wiring. The elongated backplate carries cast scrollwork and fan-shaped leaf crests above and below a raised central panel, with a screw hole at each end for surface mounting. At its centre sits a round push button: a brass dome inside a cream ring and a knurled brass bezel. The polished finish resists tarnishing and corrosion, and the bell is built to withstand the elements at an exterior entryway, suiting Victorian restorations and traditional homes. Catalogue code: GMC-VSPCB-K

"The Cherub" Bronze Door Knocker

"The Cherub" bronze door knocker is cast in solid bronze with a rich, deep brown lustrous finish and comes with matching fixing hardware. Two cherubs hold an urn at the crown of the backplate, above a hinged ring with a rope-twist border around pierced scrollwork and a carved mask face, finished with a rosette at the foot of the ring and a pointed scrolled base. The bronze is made to resist the elements and keep its lustre in harsh weather. The supplied long threaded bolts give a secure, straightforward fit on wooden, metal or fiberglass doors. It suits traditional, Victorian and eclectic entryways. Catalogue code: GMC-TJ-386a-K

Pair of Black Porcelain Door Knobs with Cast Iron Ferrule

Black porcelain door knobs with cast iron ferrules, sold as a pair, for interior doors in traditional or contemporary settings. Each knob is high-fired porcelain with a smooth, rounded black dome, set on a black ferrule and a round rose plate with screw holes, and the two knobs join on a spindle. The cast iron ferrule adds durability and a secure mounting interface, and the knobs are made to withstand daily wear and tear. They are listed with a matte black appearance; the porcelain domes show a glossy black glaze, with matte black rose plates. The set suits the restoration of a period property or a vintage touch in a modern space, and installs easily, for homeowners, contractors and interior designers. Catalogue code: GMC-TJ-B2B-K

Pair of Beaded Edge Rosette Door Plates in Bronze 3.25"

Bronze rosette door plates with a beaded perimeter, 3.25 inches and sold as a pair, for interior door knob hardware. Each round plate has a dark bronze finish with warm coppery highlights, a raised centre collar around the spindle hole, and two slotted screws at the sides. The plates are made of solid bronze for long-lasting performance, resisting tarnishing and daily wear, and the deep, rich finish gives a warm antique look that complements traditional and modern interiors. They suit a historical restoration or a simple hardware update, install easily and are built for years of heavy use, for homeowners and design professionals alike. Catalogue code: GMC-BIGPRE2B-K

Fan Design Push and Pull Door Handle Set in Aged Bronze

Fan Design push and pull door handle set in aged bronze: a matching push plate and pull plate for commercial or residential doors. Both tall backplates carry a fan crest at the top, a rope-twist border around the centre panel and an ornate pointed foot, fixed with slotted screws; the pull plate adds a turned, spindle-shaped grip handle. The set is solid metal with a hand-applied aged bronze finish, made for high-traffic doorways and resistant to tarnishing and corrosion. The fan detailing suits both traditional and modern architecture, the grip is ergonomic, and installation is easy. Catalogue code: GMC-SPH5221B-K

Swirl Wrought Iron Door Handle Entry Hardware Left and Right Pull 12 Inch Pair

12-inch swirl wrought iron door pull handles, sold as a left and right pair for front doors, gates and garden entrances. Each handle is hand-forged from iron, with scrolled swirl curls at the top, a curled tip at the base and a coiled grip wrapped around the curved centre for a comfortable hold. Two oval mounting plates, each with two screw holes, fix every handle in place. The finish is powder-coated to resist rust, corrosion and the weather, so the pair suits both interior and exterior doors. Installation is straightforward, and the mirrored left and right pulls give an entrance a symmetrical look in dark, rustic iron. Catalogue code: GMC-3005-K

Heavy Duty Push Commercial Door Plate with Bronze Finish

Heavy-duty commercial door push plate with a bronze finish, for high-traffic entrances in office buildings, retail storefronts and industrial facilities. The tall, flat rectangular plate has bevelled edges, the raised word "PUSH" on a textured panel near the top, and six slotted screws for mounting. Made from base metal with a professional-grade bronze finish, it gives the door a robust contact surface that resists fingerprints, tarnish, corrosion and daily wear, and it suits both traditional and modern architecture. Every unit is quality-tested to hardware standards for long service in high-frequency use. The easy-mount design fits standard commercial doors for quick installation by facility managers and contractors. Catalogue code: GMC-LCPUSHB-K

Pair of Shell Motif Door Plates in Aged Bronze

A pair of shell motif door plates in an aged bronze finish, cast in solid metal, for interior doors with a knob and keyed lock. Each tall rectangular backplate carries a fan-shaped shell at the top and bottom and a scrolling floral border. A smooth raised centre panel holds a collared knob opening, a keyhole and four slotted screws. The hand-applied aged bronze finish gives a warm patina that resists tarnishing and wear, and the plates suit high-traffic areas. They fit period-property restorations as well as modern homes wanting an antique look. Each set goes through quality control, and installation is straightforward. Catalogue code: GMC-TJ-B114dbB-K

Parrot Motif Push Plate in Aged Bronze Finish

Parrot motif door push plate in a dark aged bronze finish, for residential and commercial doors. The tall rectangular plate carries a raised relief of a parrot perched among scrolling vines, leaves and two large flowers on a stippled ground, with a screw hole at each corner. The seller describes it as solid metal with good durability and corrosion resistance for high-traffic doors, and it protects the door surface from fingerprints and wear. It installs easily and suits heritage restorations and tropical-themed interiors. Catalogue code: GMC-TJ-B903a-K

Victorian Window Sash Finger Lift in Solid Cast Brass

Victorian window sash finger lift in solid cast brass for double-hung windows. Its ergonomic grip gives smooth, effortless lifting of the sash and is made for frequent daily use, resisting bending and early tarnishing. The solid metal construction resists corrosion, so the lift suits both interior and exterior windows. Victorian-inspired detailing makes it a fitting finishing touch for heritage restoration and traditional homes, and it is offered in multiple finishes. The rectangular plate has a deep oval finger recess framed by raised fan and scroll relief, two countersunk screw holes and a bright polished brass finish. Catalogue code: GMC-SEH532-K

Pair of Brass Deco Nouveau Door Plates "The Vermont"

"The Vermont" is a pair of solid brass Deco Nouveau door plates for a door knob and keyed lock. Each tall plate has a round knob hole above a keyhole, four screw holes and pointed ends, with dense raised floral and geometric relief across a polished gold-tone face. The design draws on the geometric elegance of the Art Deco era. The hand-polished finish gives a warm glow and resists corrosion and tarnishing, and the plates carry a substantial weight. They suit residential and commercial doors, install easily, stand up to daily wear and sit well with both traditional and contemporary interiors. Catalogue code: GMC-1400VDP-K

Colonial Door Latch Slide Bolt 4" Wrought Iron Flush Hardware

A 4-inch Colonial door latch slide bolt in black wrought iron, a flush slide bolt for interior doors in colonial, rustic or farmhouse-style homes. The bolt runs through two guide straps on a rectangular backplate, carries a small stop knob at its centre and ends in a curled, flared handle; a separate U-shaped keeper receives the bolt when it is shut. The backplate has four screw holes and the keeper two. The wrought iron is forged and treated with a protective black finish that resists corrosion and wear, which suits high-traffic areas. It installs easily, operates smoothly, and fits both period-home restorations and modern rooms that need a touch of character. Catalogue code: GMC-10010-K

The Wells Passage Set in Polished Brass with Oval Door Knobs

Oval door knobs in polished brass make this The Wells passage set a fit for hallway doors, closets or any room that needs a non-locking latch, in traditional or transitional interiors. The set is made from high-grade solid brass for robust performance, weight and resistance to everyday wear. The polished brass finish has a bright, reflective sheen. The ergonomic oval knobs give a comfortable, smooth grip and seamless operation, whether for a full home renovation or a smaller upgrade. The smooth, egg-shaped knob sits on a round brass collar. The tall polished brass backplate carries cast scrollwork crests at the top and bottom, rope-twist side borders and four slotted fixing screws. Catalogue code: GMC-W4953FL-K

Showing 61-80 of 297 in Door Hardware

Show 20 more

Disclaimer

Information shown here is compiled from the details provided by the seller.

Legal name	Global Metal Company
GST	09ADOPA4626P1Z2
Established	2005
Location	Aligarh, Uttar Pradesh, India
Category	Architectural Hardware
Speciality	Antique reproduction, vintage brass and architectural hardware
Team size	11 to 25 People
Custom orders	Made to the buyer's spec
Contact	Raheel Ahmad · Founder and Managing Director
Email	globalmetalco@gmail.com
Catalogue	349 products
Exports	Yes (USA, Canada, Europe, Australia, UAE, Saudi Arabia, Qatar, Kuwait)
Quality	Every product undergoes precision casting, machining, polishing, and finishing, followed by rigorous quality inspection. Defective pieces are rejected, while approved products are individually packed in protective polybags, placed in labeled boxes, and securely packed in export-grade cartons for safe international shipping.
Services	Custom casting and reproduction, OEM and white-label manufacturing
In business since	2005
Hardware items	4,000+ SKUs across nearly 50 categories
GST registration	2017
Legal status	Proprietorship
Employees	11 to 25 People
US company	Incorporated in New Jersey in 2021
Lead time	Standard catalog orders typically dispatch within 3 to 4 weeks. Custom casting, OEM runs, and complex hand-antiqued orders generally take 6 to 8 weeks.
Shipping	Full container loads (FCL), less-than-container loads (LCL), and air freight shipments, with complete export documentation.
Mounting hardware	All necessary screws and basic mounting hardware are included with our products.
Other phones	+1-631 593 0140 (US / Canada)
Other emails	contact@globalmetal.companyinfo@globalmetal.company

instagram	instagram.com/globalmetalcompany
facebook	facebook.com/globalmetalcompany
youtube	youtube.com/c/GlobalMetal
linkedin	linkedin.com/in/globalmetal
twitter	x.com/globalmetalco
YouTube	youtube.com/watch?v=VEng3c45XAU

Global Metal Company

Their products

The company

What's verified

In their own words

Global Metal Company

Their products

The company

Videos & social

What's verified

In their own words