Cylinder Lock suppliers in India

Mortice Cylinders

AZH-05 mortice handle, size 200mm, listed under mortice cylinders, with a broad angular lever that bends gently downward toward its end and a profile cylinder cutout below it. The wide, flat lever has a brushed satin finish, and its base is wrapped by a squared collar in a polished bright finish. The backplate has rounded ends, a brushed satin face, a polished bright border and a polished bright cap at the bottom end, with four screw holes near the corners. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the cutout takes a profile cylinder for locking with a key. Catalogue code: 37479

Mortice Cylinders

ASZH-083 is a mortice lever handle in size 200mm with a straight, two-tone cylindrical lever: polished silver-tone ends around a darker brushed grip. It sits on a long backplate with rounded ends, a raised border and a keyhole cut-out below the lever, in a brushed satin silver-tone finish. Four screw holes, two at each end, fix the plate to the door. Part numbers: ASZH-083 Catalogue code: 37395

Mortice Cylinders

This zinc-range "OSK-60mm Premium Knob" is a 60mm mortice cylinder in a brushed silver-toned finish, with a key on one side and a broad rounded thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The profile-shaped body carries a black central cam and a threaded fixing-screw hole. The wide, flat-faced knob turns the lock from inside, and the keyway at the opposite end works it from outside. Catalogue code: 37526

Mortice Cylinders

The AZH-11 is a door lever handle on a 200mm backplate, with a keyhole cut-out for a mortice lock key. The long rectangular plate has a satin, brushed silver-tone face framed by a bright polished raised border, and fixes with four screws, two at the top and two at the bottom. The lever is square in section with a brushed finish and flares out towards its tip. It is held on a square neck with a small side grub screw. Catalogue code: 37473 Part numbers: AZH-11

Mortice Cylinders

AZH-07 is a door lever handle with a slim, tapering lever that sweeps out from a polished chrome neck, set on a keyhole backplate and offered in the Mortice Cylinders range in size 200mm. The lever works the door latch, and the keyhole below it takes the lock's key. The plate has a brushed silver face framed by a raised polished chrome border with rounded corners. Four screw holes fix it to the door. Catalogue code: 37491

Mortice Cylinders

ASZH-082 is a mortice lever handle in size 200mm with a scroll-tipped curved lever, set on a long backplate with shaped, arched ends and a keyhole cut-out below the lever. The brushed satin silver-tone plate has a raised border, and polished highlights run along the lever and its rose. Four screw holes, two at each end, fix the plate to the door. Part numbers: ASZH-082 Catalogue code: 37394

Mortice Cylinders

The "OSK-60mm Premium Knob" is a 60mm brass-range mortice cylinder with a key on one side and a thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Brass Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a polished gold-toned finish and a profile-shaped body with a black central cam and a fixing-screw hole below it. A rounded, flat-faced knob sits at one end, and a keyway at the other end lets the door lock from either side. Catalogue code: 37523

Mortice Cylinders

AZH-06 is a door lever handle on a long rectangular keyhole backplate, offered in the Mortice Cylinders range in size 200mm. The flat lever curves gently out from a square base block to work the door latch, and the keyhole below it takes the lock's key. The plate and lever have a brushed silver finish, with bright polished caps at both ends of the plate. Four screw holes, two at the top and two at the bottom, fix the plate to the door face. Catalogue code: 37492

Mortice Cylinders

AZH-10 is a two-tone door lever handle, pairing a brushed antique-bronze tone backplate and lever inset with polished chrome on the lever frame and its round rose. It is offered in the Mortice Cylinders range in size 200mm. The flat, square-cornered plate has a cylinder-profile cut-out below the lever to take a profile lock cylinder, while the lever works the door latch. Four screw holes fix the plate to the door. Catalogue code: 37480

Mortice Cylinders

AZH-01 mortice handle, size 200mm, listed under mortice cylinders: a lever handle on a tall rectangular backplate with a profile cylinder cutout below the lever. The lever is a tapered bar that flares toward its end and rises from a ball-shaped boss with two round openings, all in a polished bright finish. The backplate has a brushed satin face with a polished bright strip along one long edge and four screw holes, one at each corner. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the cutout takes a profile cylinder for locking with a key. Catalogue code: 37475

Mortice Cylinders

AZH-03 mortice handle, size 200mm, listed under mortice cylinders, with a square block boss and a classic key-shaped keyhole below the lever. The straight, flat lever has a brushed satin finish and tapers slightly toward a rounded end; it springs from a cube-shaped boss in a polished bright finish. The tall rectangular backplate has a brushed satin face and four screw holes, one at each corner. Like any mortice handle, it turns the latch of a mortice lock set into the door, and the keyhole takes the lock's key. Catalogue code: 37477

Mortice Cylinders

ASZH-081 is a mortice lever handle in size 200mm with a gently curved lever rising from a polished rose, set on a long backplate with shaped, arched ends. A keyhole cut-out sits below the lever for the key of the mortice lock it fits over. The plate has a brushed satin silver-tone finish with a raised border, and four screw holes, two at each end, fix it to the door. Part numbers: ASZH-081 Catalogue code: 37393

Mortice Cylinders

AZH-08 is a door lever handle with a straight, square-section lever in brushed silver that rises from a polished chrome collar on a keyhole backplate. It is offered in the Mortice Cylinders range in size 200mm. The lever works the door latch, and the keyhole below it takes the lock's key. The plate has a brushed face with a polished chrome edge and gently curved top and bottom ends. Four screw holes fix it to the door. Catalogue code: 37482

Mortice Cylinders

ASZH-084 is a mortice lever handle in size 200mm with a slim, tapering lever and a brushed satin silver-tone finish throughout. The long backplate has rounded ends, a raised border and a keyhole cut-out below the lever, and four screw holes, two at each end, fix it to the door. Part numbers: ASZH-084 Catalogue code: 37396

Mortice Cylinders

The "BSK-60mm" is a 60mm zinc-range mortice cylinder for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a brushed silver-toned finish and a profile-shaped body, with a black central cam that works the lock bolt and a fixing-screw hole below it. Catalogue code: 37524

Mortice Cylinders

The OSK-60mm Normal Knob is a 60mm brass euro-profile mortice cylinder with a thumb-turn knob on one side and a key on the other. The knob lets the door be locked and unlocked by hand from the inside, while the keyway serves the outer face. It has a polished gold-tone brass finish, a flat oval knob, a black centre cam and a fixing-screw hole in the lower body. It belongs to a brass range of cylinders sized 60mm to 100mm. Catalogue code: 37522 Part numbers: OSK-60mm

Mortice Cylinders

The "OSK-60mm Normal Knob" is a 60mm zinc-range mortice cylinder with a key on one side and a slim thumb-turn knob on the other, for fitting into a mortice door lock. It belongs to the Zinc Range of mortice cylinders, offered in sizes from 60mm to 100mm. The cylinder has a brushed silver-toned finish and a profile-shaped body with a black central cam and a threaded fixing-screw hole. The narrow, flat thumb-turn locks the door from inside, while the keyway at the other end serves the outside. Catalogue code: 37525

Mortice Cylinders

The AZH-12 is a door lever handle on a 200mm backplate, with a euro-profile cylinder cut-out for a mortice cylinder lock. The plate has a satin silver-tone face inside a bright polished raised border and fixes with four screws, two at the top and two at the bottom. The lever is mirror-polished, with a rounded, leaf-like swell at the rose that tapers into a slim, gently curved arm. Catalogue code: 37478 Part numbers: AZH-12

Mortice Cylinders

The BSK-60mm is a 60mm brass euro-profile mortice cylinder, the key-operated locking core fitted into a mortice door lock. It has a polished gold-tone brass finish, a black centre cam that turns to work the lock bolt, and a fixing-screw hole in the lower body. The front face carries a round keyway plug. It belongs to a brass range of cylinders sized 60mm to 100mm. Catalogue code: 37521 Part numbers: BSK-60mm

Mortice Cylinders

AZH-09 is a door lever handle on a flat, square-cornered backplate with a cylinder-profile cut-out, offered in the Mortice Cylinders range in size 200mm. The cut-out below the lever takes a profile lock cylinder, and the lever works the door latch. The brushed silver lever carries a polished chrome inset along its top face, and the plain brushed silver plate is fixed to the door with four screw holes. Catalogue code: 37481

Mortice Cylinders

AZH-04 mortice handle, size 200mm, listed under mortice cylinders, with a flat paddle-style lever that ends in a rounded tip and a profile cylinder cutout below it. The lever has a brushed satin finish and rises from a round collar with a polished bright ring. The tall rectangular backplate has a brushed satin face, a polished bright strip along one long edge and four screw holes, one at each corner. As with any mortice handle, it works the latch of a mortice lock fitted inside the door, and the cutout takes a profile cylinder for key locking. Catalogue code: 37493

Mortice Cylinders

AZH-02 mortice handle, size 200mm, listed under mortice cylinders, with a long spindle-shaped lever and a backplate whose top and bottom ends curve outward. A profile cylinder cutout sits below the lever. The lever swells through the middle and narrows to a polished bright tip, with a brushed satin body. The backplate has a brushed satin face framed by a raised polished bright border, fixed by two screws, one near the top and one near the bottom. As with any mortice handle, it works the latch of a mortice lock fitted inside the door, and the cutout takes a profile cylinder for key locking. Catalogue code: 37476