Cuplock Scaffolding suppliers in India

Cuplock Systems

Cuplock Hop Up Bracket, a side bracket that fits to a cuplock standard to carry extra boards beside the main working platform. It is a welded triangular frame of silver metal tube: a straight top arm ending in a flat end plate, a sloping lower arm, and a short upright strut between them. At the inner end, a short vertical tube with a cup fitting links the frame to the standard. It is part of a cuplock accessory range manufactured, supplied and exported from Ludhiana, Punjab.

Cuplock Systems

Cuplock scaffolding diagonal brace for bracing cuplock scaffold bays. Fixed diagonally across a bay, it ties the standards together and keeps the scaffold square and steady against sideways movement. The brace is a long, straight tube in a silver finish with a fitting at each end for attaching to the scaffold frame. It is made in Ludhiana, Punjab, within a cuplock accessory range that also covers standards, ledgers, transoms, top and bottom cups, extension adaptors and hop-up brackets.

Cuplock Systems

Drop forged cuplock top cup with 3 or 4 legs, a node fitting for cuplock scaffolding systems. In a cuplock scaffold, the top cup slides along the vertical standard and turns down over the ledger blade ends, locking them into the bottom cup at each joint. The cup is a dark grey ring with a rough forged finish, a notched upper rim and raised lugs around its outer face that give a grip for turning it into place. It is made in Ludhiana, Punjab, as one of a full set of cuplock accessories that runs from ledger blades and bottom cups to standards, braces and transoms.

Cuplock Systems

Cuplock Vertical Post Standard, the upright tube of a cuplock scaffold that holds the ledgers and transoms at fixed cup positions. The straight silver metal tube carries cup fittings spaced at regular intervals along its length, with a plain tube end at the top. It is manufactured, supplied and exported from Ludhiana, Punjab, as part of a cuplock range that also lists the Cuplock Standard, ledgers, transoms, diagonal braces and hop up brackets.

Cuplock Systems

Forged cuplock bottom cup, the lower half of the cup-lock joint on a cuplock scaffold standard. Fixed to the vertical standard, it receives the ledger and transom blade ends, and the top cup then locks down over them to hold the joint. This forged version is a deep, bowl-shaped cup in a plain grey metal finish, with notches cut into its rim where the blades seat. It is made in Ludhiana, Punjab, alongside the pressed bottom cup and the rest of a cuplock accessory range.

Cuplock Systems

Cuplock Ledgers, the horizontal tubes that link cuplock standards and form the frame for working platforms. Each ledger is a straight silver metal tube with a flat blade end at both ends, which locks into the cups on the standard. They are manufactured, supplied and exported from Ludhiana, Punjab, as part of a cuplock accessory range that also covers ledger blades, standards, transoms, diagonal braces and hop up brackets.

Cuplock Systems

Cuplock inside board transom for carrying scaffold boards on the inner side of a cuplock scaffold, between the main frame and the structure being worked on. It lets a working platform extend inward from the standards. The transom is a tube in a grey-silver finish with a channel bracket at one end, a second channel bracket part-way along, and a shorter tube section running on beyond it to a small end fitting. It is made in Ludhiana, Punjab, together with the intermediate transom and a full cuplock accessory range.

Cuplock Systems

Forged cuplock scaffolding system that joins vertical standards and horizontal ledgers at a single node, for access scaffolds and formwork support. At each node a top cup with lugs locks the ledger ends down into a fixed bottom cup on the standard. The node joins four horizontal ledger tubes to one vertical standard, with silver metal tubes and fittings. The cuplock range covers Ledger Blade, Ledger Blade with Hole, Top Cup 3 or 4 Legs (Drop Forged), Bottom Cup Pressed, Cuplock Standard, Cuplock Scaffolding Diagonal Brace, Scaffold Intermediate Transom, Cuplock Inside board transom, Extension Adaptor, Hop Up Bracket, Vertical Post Standard and Cuplock Ledgers.

Cuplock Systems

Cuplock ledger blade with hole, the variant of the ledger blade with an oval opening through its centre, used as the end fitting of a cuplock scaffolding ledger that seats in the bottom cup and is clamped by the top cup. A raised rim runs around the opening, with a curved wing at each end, all in rough-textured grey metal. It sits in a cuplock range alongside the plain Ledger Blade, Cuplock Standard and Cuplock Ledgers.

Cuplock Systems

Cuplock ledger blade, the end fitting of a cuplock scaffolding ledger that seats in the bottom cup on a standard and is clamped in place by the top cup. It has a rough-textured grey metal body with a shallow round recess in the centre and a curved wing at each end. It belongs to a cuplock range that also includes the Ledger Blade with Hole, Top Cup 3 or 4 Legs (Drop Forged) and Bottom Cup Pressed.

Cuplock Systems

Pressed cuplock bottom cup, the lower cup of a cuplock scaffolding joint. It sits on the vertical standard to take the ledger and transom blade ends, which the top cup then locks into place. The pressed cup has a smooth, bright silver finish and a rounded bowl profile, with shaped notches around the inner rim for the blades to seat in. It is made in Ludhiana, Punjab, as part of a cuplock accessory range that also includes a forged bottom cup and drop forged top cups.

Cuplock Systems

Cuplock scaffold intermediate transom, a cross member that spans between ledgers to give scaffold boards extra support part-way along a bay. It helps carry the working platform where the board span would otherwise be long. The transom is a straight tube in a silver finish with a U-shaped channel bracket at each end that hooks over the ledgers. It is made in Ludhiana, Punjab, alongside the inside board transom and the rest of a cuplock accessory range.

Cuplock Systems

Cuplock Extension Adaptor for cuplock scaffolding, used to add height to a vertical standard in a cuplock system. It has a silver metal tubular body in which a narrower tube slides into a wider sleeve, with a hole near the joint and a round pin at the sleeve, and cup fittings sit near the lower end. It belongs to a range of cuplock accessories manufactured, supplied and exported from Ludhiana, Punjab, alongside ledger blades, top and bottom cups, standards, diagonal braces, transoms, hop up brackets and ledgers.