Elevation Tile suppliers in India
Sorted by best match
Elevation Series
Elevation 61071 Tile 450 x 300 mm
Elevation Series 61071 is a 450 x 300 mm wall tile with a whitewashed brick look, its off-white bricks streaked with patches of rust red and touches of grey. The bricks have a rough, textured face and sit in a running bond against dark charcoal joints, giving a weathered, painted-brick wall effect.
The tile is sold as 100% water proof and comes in matt and glossy finishes.
Catalogue code: 61071
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61111 Tile 450 x 300 mm
Elevation 61111 is a rustic, weathered wood-look wall tile in beige and tan, sized 450 x 300 mm, from the Elevation Series. One long plank sits above two shorter planks, with grooved joints that give the face a staggered timber-board layout.
The planks show etched grain, knots and cracks, with darker rust-brown patches. The tiles are 100% water proof and come in matt and glossy finishes.
Catalogue code: 61111
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61079 Tile 450 x 300 mm
Elevation 61079 is a rustic 450 x 300 mm wall tile from the Elevation Series, patterned as rough, weathered bricks in off-white, slate blue, dark plum-brown and tan. The brick faces carry a deep, uneven texture and sit in an offset bond with pale joints, giving the look of old reclaimed brickwork in mixed colours.
The tile is described as "100% Water Proof" and is offered in matt and glossy finishes.
Catalogue code: 61079
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61097 Tile 450 x 300 mm
Elevation 61097 is a 450 x 300 mm wall tile from the Elevation Series that combines white pebble blocks with blue marbled panels. The marbled areas swirl through deep blue, teal and pale blue with copper-orange flecks, and the two squares of raised-look white pebbles on light grey sit at opposite corners.
The tile is 100% water proof and is available in matt and glossy finishes.
Catalogue code: 61097
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61051 Tile 450 x 300 mm
Elevation 61051 wall tile, 450 x 300 mm, from the Elevation Series, with honey, tan and cream log slices and a few deep brown ones on a grey-brown wood-grain ground. The warm wood tones stand out against the darker base, and each slice carries etched growth rings with a crack running in from its edge.
The tile is 100% water proof and comes in matt and glossy finishes, giving a choice of a soft or a shiny surface for this warm log design.
Catalogue code: 61051
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61064 Tile 450 x 300 mm
Elevation Series 61064 wall tile in 450 x 300 mm with an exposed red-brick look. Rows of rough-textured, terracotta-red bricks are laid in a running bond with wide light grey mortar joints, giving the face an uneven, rustic brickwork appearance.
The seller lists it as a 100% water proof tile, available in matt and glossy finishes.
Catalogue code: 61064
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61075 Tile 450 x 300 mm
Elevation Series 61075 is a 450 x 300 mm wall tile with a multi-coloured brick design mixing cream, grey, tan-orange and deep maroon-brown bricks. The rough-textured bricks are laid in a running bond with light mortar lines, and the varied tones create a patchwork, reclaimed-brick look.
The tile is sold as 100% water proof and comes in matt and glossy finishes.
Catalogue code: 61075
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61138 Tile 450 x 300 mm
Stone-cladding-look wall tile, Elevation Series design 61138, in the 450 x 300 mm size. Rough, split-stone style blocks in slate blue-grey, rust orange, sand and ash grey are laid in a staggered brick bond with wide grey joints, giving a rustic natural-stone wall effect.
The tile is 100% water proof and is offered in both matt and glossy finishes.
Catalogue code: 61138
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61124 Tile 450 x 300 mm
Elevation Series design 61124 is a 450 x 300 mm wall tile with panels of rounded pebble stones in peach, cream, terracotta and black, framed in dark grey stone-look borders. Two narrow side panels of smaller taupe pebbles sit in light grey frames, balancing the warm wide panels with a cooler tone.
The tile is 100% water proof and is offered in matt and glossy finishes.
Catalogue code: 61124
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61090 Tile 450 x 300 mm
Design 61090 from the Elevation Series is a 450 x 300 mm wall tile with a woven pattern of curved, stone-look bands in charcoal, grey-brown, rust and sand, each marked with fine light veining. Slim vertical strips in pale pink and dark brown run between the bands.
The tile is made for walls, is offered in matt and glossy finishes, and is 100% water proof.
Catalogue code: 61090
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61018 Tile 450 x 300 mm
Multi-colour stone-look wall tile, Elevation 61018, in 450 x 300 mm: rough-cut stone shapes in grey, rust orange and streaks of blue, set in a dark grey joint pattern. Part of the Elevation Series, it is listed as 100% Water Proof Tiles and comes in Matt and Glossy finishes.
The bold rust and blue veining across each stone gives a wall a weathered, rustic stone character.
Catalogue code: 61018
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61156 Tile 450 x 300 mm
A multicolour 3D brick wall tile, Elevation 61156 measures 450 x 300 mm and sets curved, bulging bricks in terracotta orange, speckled black, speckled light grey and plain white between white fluted pilaster strips. The staggered rows and curved faces create a bold, raised pattern across the wall.
The tile belongs to the Elevation Series, is sold as 100% water proof, and is available in matt and glossy.
Catalogue code: 61156
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61045 Tile 450 x 300 mm
Elevation 61045 is a 450 x 300 mm wall tile printed with a log-slice design: round and oval cross-sections of timber showing growth rings and radial cracks in light tan and honey tones, scattered over a sandy brown background. The slices vary in size, giving the surface an organic, rustic pattern.
From the Elevation Series, the tiles are 100% water proof and come in matt and glossy finishes.
Catalogue code: 61045
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61083 Tile 450 x 300 mm
Elevation 61083 is a 450 x 300 mm wall tile from the Elevation Series with a grey terrazzo-look basket-weave design. Wide curved grey bands, flecked with white, charcoal and blue chips, alternate with white fluted strips to give the wall a woven, layered look. The tile is 100% water proof and comes in matt and glossy finishes.
Catalogue code: 61083
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61145 Tile 450 x 300 mm
Elevation 61145 is a 450 x 300 mm wall tile from the Elevation Series in warm beige and sandstone tones, with soft peach and tan shading across the blocks. Its brick-shaped stone blocks line up in horizontal rows, each joint set off by a slanted light-brown strip, for a stepped elevation pattern with a fine grainy texture. The tile is 100% water proof and is available in matt and glossy finishes.
Catalogue code: 61145
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61033 Tile 450 x 300 mm
Elevation 61033 is a grey-toned stone-look mosaic wall tile in 450 x 300 mm from the Elevation Series. The grid of square blocks moves from off-white and light grey through mid grey to a cool slate grey, combining smooth, lightly streaked faces with pitted and rough textures.
The tile is made as a 100% water proof tile and is available in Matt and Glossy finishes.
Catalogue code: 61033
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61110 Tile 450 x 300 mm
Elevation 61110 pairs a dark weathered-brown plank with natural light oak tones on a 450 x 300 mm wall tile from the Elevation Series. The long upper plank has a smoky brown, cracked-timber look, while the two shorter planks below show pale natural wood grain with a round knot.
Dark grooved joints separate the planks for a staggered board effect. The tiles are 100% water proof and are available in matt and glossy finishes.
Catalogue code: 61110
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61089 Tile 450 x 300 mm
Elevation Series wall tile, design 61089, in a 450 x 300 mm size. The design is a basket weave of curved, wood-grain bands in warm brown, crossed by narrow ribbed strips in a lighter tan, giving a woven timber look.
It is made for walls, comes in matt and glossy finishes, and is 100% water proof.
Catalogue code: 61089
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61101 Tile 450 x 300 mm
Elevation Series 61101 wall tile, 450 x 300 mm, with a bevelled brick pattern in rust-brown and off-white rows. Each block has a raised bevelled edge and a weathered, mottled surface, and the rows are set off by dark joint lines for a classic subway-brick effect.
The tile is 100% water proof and comes in a choice of matt or glossy finish.
Catalogue code: 61101
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61021 Tile 450 x 300 mm
Warm brown stacked-strip wall tile, Elevation 61021, sized 450 x 300 mm: horizontal bands in terracotta, sand, cream and dark chocolate brown, staggered in layers with a speckled stone texture. From the Elevation Series, it is listed as 100% Water Proof Tiles and comes in Matt and Glossy finishes.
The earthy brown palette and layered strips give a wall a warm, ledgestone-style finish.
Catalogue code: 61021
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61112 Tile 450 x 300 mm
Elevation 61112 is a geometric block-pattern wall tile, 450 x 300 mm, from the Elevation Series, mixing marble, stone and wood looks on one face. Rectangles of black marble with white veining, white marble with grey veining, light natural wood grain and dark grey speckled panels interlock across the surface.
Smaller grey stone-look blocks are drawn with bevelled edges and shading, so they appear to stand out from the wall in 3D. The tiles are 100% water proof and are offered in matt and glossy finishes.
Catalogue code: 61112
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61085 Tile 450 x 300 mm
A light grey and charcoal basket-weave wall tile, Elevation 61085 measures 450 x 300 mm and belongs to the Elevation Series. Pale grey curved bands with a fine speckled stone texture sit against dark charcoal fluted strips, giving a strong two-tone contrast across the wall. The tile is 100% water proof and comes in matt and glossy finishes.
Catalogue code: 61085
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61077 Tile 450 x 300 mm
Elevation 61077 is a 450 x 300 mm wall tile from the Elevation Series with a warm, rounded brick-look pattern in white, sand, orange, brown and smoky grey. The bricks have soft, curved faces and a lightly textured surface, laid in an offset bond with dark joints, so the face of a wall takes on the look of mixed clay brickwork.
The tile is described as "100% Water Proof" and is available in matt and glossy finishes.
Catalogue code: 61077
Price on request
DC
Denora Ceramic LLPMorbi→
Elevation Series
Elevation 61159 Tile 450 x 300 mm
Elevation 61159 is a 450 x 300 mm pebble-pattern wall tile in warm earth tones: rounded stones in cream, beige, tan, golden brown and dark brown, with clusters of small mixed pebbles gathered into larger shapes. The raised, layered stones give the wall a natural river-pebble look.
From the Elevation Series, it is a 100% water proof tile and comes in matt and glossy.
Catalogue code: 61159
Price on request
DC
Denora Ceramic LLPMorbi→Not finding the right supplier?
We'll ask suppliers who can supply it.
About elevation tile
Elevation tiles clad the outside walls of homes, shops and apartment fronts, giving facades texture and colour while shielding the masonry from rain and sun. Ceramic elevation tiles are commonly sized 450 x 300 mm, in plain shades and design series with stone, brick, wood and relief looks. Buyers compare water absorption, weather resistance, surface texture, colour fastness under UV, tile thickness and the back pattern for adhesive grip. Builders, architects and contractors choose them for front elevations, boundary walls, pillars and balconies, often mixing plain and patterned tiles in one design.
Buyer's guide
What to check
- Check water absorption, since lower values suit exterior walls exposed to rain.
- Confirm the size and thickness in mm, and calibration so joints line up across the facade.
- Look for UV-stable colours and a textured or matt surface for outdoor use.
What to ask the supplier
- Ask for conformity to IS 15622 or ISO 13006 for ceramic tiles.
- Ask for one batch and shade number across the full order quantity.
- Ask for the recommended tile adhesive for exterior cladding.
Content updated 9 October 2026