Band Sealer Spare Part suppliers in India
Band Sealer Spare PartSorted by best match
Band Sealer
Front Conveyor Roller For Frb-770 Band Sealer | Spare Part For Continuous Band Sealing Machine Conveyor System
This front conveyor roller is a replacement part for the FRB-770 band sealer conveyor system. It has two grey roller sleeves on a shared shaft, joined at the centre by a small toothed gear and held between flat end plates. It supports the conveyor belt at the front of the continuous band sealing machine so pouches travel into the sealing section.
₹1,250
P
PackerialsVaranasi→
Band Sealer
Two Relay Base For Frb-770 Speed Controller | Electrical Spare Part For Continuous Band Sealing Machine
This set of two relay bases is an electrical spare part for the FRB-770 speed controller of a continuous band sealing machine. Each base is a black moulded socket with a round eight-hole relay socket in the centre, eight screw terminals in two rows of four, and two mounting holes on the sides. It serves as the replacement relay socket base for the speed controller of FRB-770 band sealers.
₹360
P
PackerialsVaranasi→
Band Sealer
Fr-770 Speed Controller For Band Sealer | Speed Regulator Spare Part For Continuous Band Sealing Machines
This speed controller is a plug-in replacement module for FR-770 continuous band sealing machines. It has a clear rectangular case on a black pin base, with the circuit components visible inside. It regulates conveyor speed on the band sealer. It replaces a worn or faulty controller.
₹420
P
PackerialsVaranasi→
Band Sealer
Pack Of 10 Teflon Belts For Frb-770 Band Sealer Brown | PTFE Conveyor Sealing Belts For Continuous Band Sealing Machines
For FRB-770 band sealers, this pack of 10 brown PTFE Teflon belts provides replacement sealing and conveyor belts. The belts are thin brown endless loops held together with a yellow tie. They carry the bag mouth past the heating and cooling blocks of the FRB-770 during continuous sealing, and the heat-resistant PTFE material suits that contact, making the set a practical maintenance spare for packing lines.
₹300
P
PackerialsVaranasi→
Band Sealer
300w Heavy Duty Heater For Band Sealer | Cartridge Heater Spare Part For Continuous Band Sealing Machines
This 300 W cartridge heater is a replacement heating element for continuous band sealing machines. It is a slim cylindrical metal rod with two lead wires in sleeving. Fitted into the heating block of a continuous band sealer, it supplies the heat that the moving bands carry to the bag mouth. It serves as a heavy duty spare for replacing a worn heater and keeping the sealing line running.
₹450
P
PackerialsVaranasi→
Band Sealer
Rear Conveyor Roller For Frb-770 Band Sealer | Spare Part For Continuous Band Sealing Machine Conveyor System
This conveyor roller is a spare part for the FRB-770 continuous band sealing machine conveyor system. It is a grey cylindrical roller with a short dark metal shaft projecting from each end for mounting in the conveyor frame. It carries the conveyor belt that moves bags through the sealer and replaces a worn roller to keep the FRB-770 conveyor in service.
₹900
P
PackerialsVaranasi→
Band Sealer
Analog Temperature Controller For Band Sealer | Heat Control Spare Part For Continuous Band Sealing Machines
This analog temperature controller is a replacement heat control unit for continuous band sealing machines. The square front panel carries a window scale and a large setting dial, both marked from 0 to 400 °C, with a green ON lamp and a red OFF lamp. It comes with two side mounting clamps for fixing into a panel cut-out. Fitted to a band sealer, it sets the sealing heat.
₹1,450
P
PackerialsVaranasi→
Band Sealer
Pack Of 10 Teflon Belts For Fr-900 Band Sealer Brown | PTFE Conveyor Sealing Belts For Continuous Band Sealing Machines
Sized for the FR-900 band sealer, this pack of 10 brown PTFE Teflon belts serves as replacement sealing and conveyor belts for continuous band sealing machines. The belts are thin brown endless loops bundled with a yellow tie. They carry the bag through the sealing section of the FR-900, and the heat-resistant PTFE belt material suits the continuous contact with the heating blocks during bag and pouch sealing.
₹450
P
PackerialsVaranasi→
Band Sealer
220k Potentiometer For Band Sealer | Speed Control Pot Meter Spare Part For Continuous Band Sealing Machines
This 220K potentiometer is a replacement speed-control pot meter for continuous band sealing machines. It is a round metal-cased rotary part with three solder tabs, marked 220K on the back. Fitted behind the speed adjustment knob, it lets the operator set how fast the conveyor carries bags through the band sealer. It serves as a spare for repair and maintenance, restoring speed control when the original pot meter wears out.
₹270
P
PackerialsVaranasi→
Band Sealer
Adjusting Block For Frb-770 Band Sealer | Spare Part For Continuous Band Sealing Machine Applications
This adjusting block is a replacement part for the FRB-770 continuous band sealer. It is a black rectangular block with a round through-hole on top, a slot beside it, a stepped shaft projecting from one side and a small pin. It fits the conveyor adjustment assembly of the band sealer, which sets the conveyor position. It serves as a spare for continuous band sealing machines during repair and servicing.
₹340
P
PackerialsVaranasi→
Band Sealer
Driving Wheel Roller For Frb-770 | Spare Part For Continuous Band Sealing Machine & Heat Sealer Applications
This driving wheel roller is a spare drive part for the FRB-770 continuous band sealing machine. The bright-finish wheel has a knurled outer rim and a stepped face with a central bore for its drive shaft. It transmits drive to the sealing band and conveyor, moving pouches through the heat sealer. It is a replacement for a worn drive wheel on the FRB-770.
₹310
P
PackerialsVaranasi→
Band Sealer
Driven Wheel Roller Bearing For Frb-770 | Spare Part For Continuous Band Sealing Machine Applications
This driven wheel roller bearing is a replacement part for the FRB-770 continuous band sealing machine. It is a compact grooved wheel with a bright finish, built around a bearing with a central bore for mounting on its shaft. Fitted to the band sealer, it guides the sealing band and conveyor movement.
₹300
P
PackerialsVaranasi→
Band Sealer
Pack Of 10 Premium Teflon Belts For Frb-770 Band Sealing Machine | Heat Resistant Spare Belt Set For Continuous Band Sealer
This set of 10 heat-resistant Teflon belts is made to fit the FRB-770 continuous band sealing machine. The belts are thin, pale beige endless loops bundled together with a yellow tie. They run as the sealing belts that carry the bag mouth through the heating and cooling blocks of the band sealer, and a spare set lets worn belts be swapped during routine maintenance.
₹850
P
PackerialsVaranasi→
Band Sealer
Pack Of Three Main Power Socket With Fuse For Band Sealer | Electrical Spare Part For Continuous Band Sealing Machines
This pack of three main power sockets with fuse is an electrical spare for continuous band sealing machines. Each socket has a black hexagonal flange with two mounting holes and brass-coloured screw terminals at the rear for wiring. It serves as the machine's power inlet with a built-in fuse, and replaces a damaged or worn socket on a band sealer's body during electrical repairs.
₹360
P
PackerialsVaranasi→
Band Sealer
Pack Of 50 Premium PTFE Teflon Belts For Fr-770 Continuous Band Sealing Machine | Heat Resistant Spare Belt Set
This 50-piece set of PTFE Teflon belts is a heat-resistant spare set for the FR-770 continuous band sealing machine. The belts are thin, light tan endless loops stacked in one bundle and held with white ties. They run as the sealing belts that pass the bag mouth through the heater and cooling sections, and the large pack count suits frequent belt changes on sealing lines.
₹4,000
P
PackerialsVaranasi→
Band Sealer
Pack Of 50 Teflon Belts For Frb-770 Band Sealer Brown | PTFE Conveyor Sealing Belts For Continuous Band Sealing Machines
Packed 50 to a set, these brown PTFE Teflon belts are conveyor sealing belts for the FRB-770 band sealer. The thin brown endless loops are bundled together and tied with yellow ties at top and bottom. They carry bags through the heating and cooling blocks of the FRB-770 during continuous sealing, and the heat-resistant PTFE material and large quantity make the set a stock spare for workshops and packing lines.
₹1,500
P
PackerialsVaranasi→
Band Sealer
Pack Of 6 Teeth Belts For Fr-900 Band Sealer | Timing Belt Spare Parts For Continuous Band Sealing Machines
This pack of 6 teeth belts is a timing belt replacement set for the FR-900 continuous band sealer. Each belt is a thin, yellow endless ring with fine teeth moulded along its inner edge to grip the drive pulleys. The belts transfer drive inside the FR-900 sealing mechanism, and a spare set supports quick replacement when a belt wears during regular use on packing lines.
₹440
P
PackerialsVaranasi→
Band Sealer
Pack Of 10 Carbon Brushes For Band Sealer | Motor Spare Parts For Continuous Band Sealing Machines
This pack of 10 carbon brushes is a motor spare for continuous band sealing machines. Each brush is a rectangular grey carbon block with a coiled spring and copper lead running to a flat brass-coloured terminal tab for fitting in the brush holder. They are used to replace worn brushes in the drive motor of a band sealer.
₹380
P
PackerialsVaranasi→
Band Sealer
Pack Of 6 Timing Belts For Frb-770 Band Sealer | Teeth Belt Spare Parts For Continuous Band Sealing Machines
Made for the FRB-770 band sealer, this pack of 6 timing belts serves as a teeth belt spare kit for continuous band sealing machines. The belts are thin endless rings in yellow and pale tones, with fine teeth along the inner edge. They transmit drive within the FRB-770 sealing mechanism and are kept as maintenance spares so worn belts can be changed and the sealer returned to work.
₹440
P
PackerialsVaranasi→
Band Sealer
Pack Of 50 Brown Teflon Belts For Fr-900 Band Sealer | Heat Resistant Spare Belt Set For Continuous Band Sealing Machines
This bulk pack of 50 brown Teflon belts is made for the FR-900 continuous band sealer. The thin brown endless belts come stacked together and tied with red ties at two points. They serve as heat-resistant spare sealing belts that carry bags through the heated section of the machine, and the 50-piece quantity suits packing units and service teams that keep a stock of FR-900 spares on hand.
₹1,250
P
PackerialsVaranasi→
Band Sealer
Pack Of 20 Teflon Belts For Fr-900 Band Sealer Brown | PTFE Conveyor Sealing Belts For Continuous Band Sealing Machines
This 20-piece pack of brown PTFE Teflon belts fits the FR-900 continuous band sealer. Each belt is a thin brown endless loop, and the set comes gathered into one bundle. The belts act as the sealing and conveyor belts that carry the bag through the heated section of the machine, and the larger pack count suits users who run FR-900 sealers regularly and replace belts often as part of routine upkeep.
₹650
P
PackerialsVaranasi→
Band Sealer
On Off Switch For Band Sealing Machine | Main Power, Heater & Fan Control Switch Spare Part For Continuous Band Sealers
This on/off switch is a spare part for continuous band sealing machines, made as a replacement part for the FRB-770 band sealer. It is a red rocker switch set in a black rectangular bezel. Fitted into the sealer control panel, it serves as the main power, heater or fan control switch, turning that circuit on and off.
₹200
P
PackerialsVaranasi→Not finding the right supplier?
We'll ask suppliers who can supply it.
About band sealer spare part
Continuous band sealers wear through belts, heaters and motor parts with regular use. This item type covers replacement parts for FR-900 and FRB-770 horizontal band sealers: brown PTFE-coated sealing belts in multi-packs, toothed belts that drive the conveyor, rear conveyor rollers, adjusting blocks, 300 W cartridge heaters, analog temperature controllers, speed controllers, 220k potentiometers, carbon brushes and on-off switches. Buyers match the part to the machine model, then compare belt length, width and thickness, heater wattage and voltage, and the controller's temperature range.
Buyer's guide
What to check
- Confirm the machine model match (FR-900, FRB-770 or other)
- Check belt length, width and thickness for PTFE sealing belts
- Check heater wattage and voltage (for example 300 W, 230 V)
- Check temperature controller range and sensor type
What to ask the supplier
- Ask for the pack quantity and price per piece
- Confirm fit by sharing the part number or model of your existing part
Content updated 23 September 2026